1) HotSync Port: On the bottom of the unit, mates with the cradle. This is the default and does not light the Port LED.
|
|
- Ronald Fowler
- 5 years ago
- Views:
Transcription
1 Introduction: The Koala PDA has 5 selectable I/O ports, instead of the usual single Hotsync Port. While these ports can be selected using simple software commands, the Koala Utility is designed to allow the user to manually select between the various ports, set the default port, as well as determine which port will be used for subsequent HotSync operations. In addition, it allows for functional testing of the Koala s card reader and printer. The 5 I/O Ports are described here: 1) HotSync Port: On the bottom of the unit, mates with the cradle. This is the default and does not light the Port LED. 2) Side Port DB9: Serial (9-pin) connector on the left side of the Koala. Repeated on the back of the cradle. This lights the Port LED YELLOW. This connector is configured like a PC serial port, and you can plug many devices designed to plug directly into a PC into this connector. If you use this for HotSync, you must have both a Gender Changer AND a Null Modem in the serial cable. 3) Printer/Swiper: Activates the receipt printer output and credit-card swipe input. Lights the Printer LED Green (3rd LED down). This turns on the printer unit automatically, and any other selection turns off the printer. If left on, the printer turns itself off after 5 minutes. 4) Internal Modem (OPTIONAL): 36K modem that connects through the RJ-11 on the side of the Koala or on the back of the cradle. This lights the Port LED RED. 5) PCMCIA Slot: Can be selected when you have an actual card in the slot. This lights the Port LED GREEN. Figure 1 LED Locations and Legends
2 Starting Koala Utility: Locate and tap on the Koala Utility icon as shown below. Once started, the program will give you a display, showing the available ports, with the currently active one highlighted: You can select any of the available ports to become active by tapping on it. The Koala s multiple ports act like the Standard Palm Hotsync port, connected to an RS-232 switch. Changing a port selection simply flips this switch to the device needed at the time. Programs like Koala s version of Pocket Verifier Professional use modem-style AT commands to change the settings of the switch. The Pending indicator <- informs you as to the next Port in line to be selected by default. With no card in the slot, setting it "Pending" will activate it automatically when the card is inserted, and return to the default port when the card is ejected.
3 Battery Monitor: The battery indicator at the top of the screen displays actual battery pack voltage, and can be refreshed by tapping on the battery image. The Koala s Ni-MH battery pack is rated for a nominal 4.8 Volts at full charge, but the Koala, when not actually transmitting or printing consumes so little power that the battery voltage can float at up to 5.85 Volts. The Koala can operate with the pack at any voltage above 4.25 Volts. Printer / Card Reader Test: Tap on the Koala Utility title, and then on the Printer / Card Swipe option.
4 You will see the screen shown below: This option will automatically select the Printer / Reader port. Power is intelligently provided to the printer / reader only while it is selected. Remember, the printer and card reader will shut down after 5 minutes in order to conserve power. When the printer turns on, you will hear the 5 rising tones and you will be alerted to it s shut-down by the 5 falling tones. Pressing the Printer Send will send the text on the line below the button to the printer. This text is initially set to This is the Koala Printer Test, but you can change it to any string of characters you like. Clear Port Stack: This selection is intended for Koala Software Developers. The Koala has the ability to take the current I/O port setting, and store it in memory. This memory storage is known as a stack and operates on a last-in first-out basis. This allows a program to store the current I/O port setting, change the port for use, and restore the old setting when finished. The Clear Port Stack selection allows the user to manually empty the contents of the stack.
5 HotSync Preferences: The Koala has the ability to perform it s HotSync through any one of three I/O ports: The cradle connector (HotSync Port), the Side Port (DB9), and the optional Internal Modem. In order to set the default port for the next and subsequent HotSync operations, tap on the Koala Utility title, and then on HotSync Preferences: You will see the screen shown below: Remember, if you use the Side Port (DB9) for HotSync, you must have both a Gender Changer AND a Null Modem in the serial cable. Using the Optional Internal Modem will require additional setup. NOTE: For normal operation, set and leave the HotSync Preferences in the HotSync Port setting.
6 Battery Meter: This setting is applicable only to the first-generation prototype Koala s. This option will disappear in the production version of the Koala. The purpose of this setting is to properly calibrate the battery meter scale to the Koala: Since each Koala is upgraded to the highest version, as they return from various evaluations, you will probably have Version 1.1. If your battery indicator reads either 2.5 V or V (approx) on a full charge, you have the wrong setting. If your battery reads around 5 volts on a full charge, you have the proper setting. Help: This option will display help text for each available option, and will be updated regularly to reflect common problems and settings. About: This option will display the Version of the Koala Utility, as well as the Firmware Version of the Koala itself.
LI Automated Soil CO 2 Flux System. Configuring the Palm Tungsten C for use with the LI-8100
LI-8100 Automated Soil CO 2 Flux System Configuring the Palm Tungsten C for use with the LI-8100 NOTICE The information contained in this document is subject to change without notice. LI-COR MAKES NO WARRANTY
More informationGetting Started. Quick Start: Where to find more information. Steps What to do Purpose. Page 2
Contents Getting Started...2 About Your PP-55...3 Charging Battery...4 Loading Paper...5 Compatible Mobile Devices...6 Installing Print Software...7 Printer Status & Operating Modes...8 Magnetic Card Reader
More informationPocket tek. ServSoft. Spa info Current states Spa setup Troubleshooting Advanced tools Documentation and much more. now with.
Pocket tek Palm OS based spa service technician digital assistant by Gecko Alliance. User's Manual now with ServSoft version 2 Spa info Current states Spa setup Troubleshooting Advanced tools Documentation
More informationTroubleshooting Q&A. Your CLIÉ handheld does not operate properly. You cannot perform the HotSync operation. Error message
4-670-948-11 (1) Your CLIÉ handheld does not operate properly You cannot perform the HotSync operation Error message You cannot enter data properly How to operate basic applications (PIM) You cannot beam
More informationDolphin ebase. Communication Cradle for the Dolphin 9700 Mobile Computer. User s Guide
Dolphin ebase Communication Cradle for the Dolphin 9700 Mobile Computer User s Guide Introduction The Ethernet Base (ebase) enables a single Dolphin 9700 computer to communicate with a host device over
More informationTinyTrak4 v7 Hardware Manual
Overview TinyTrak4 v7 Hardware Manual Version 7.2 July 23, 2017 The TinyTrak4 (TT4) is a radio interface capable of transmitting and receiving position and other digital information over a two-way FM radio.
More informationACS MobileMate (for Android)
ACS MobileMate (for Android) User Manual V1.01 Subject to change without prior notice Table of Contents 1.0. Introduction... 4 2.0. Specifications... 5 2.1. Supported Mobile Operating Systems... 5 2.2.
More informationFirmware Update Procedures
Wireless File Transmitter WFT-E3 / E3A Firmware Update Procedures Outline for Firmware Update Procedures 1. Format the CF card used for the firmware update. Use the camera (WFT-E3/E3A compatibility camera
More information1875 Smart Calibrator. Instruction Manual
THORNTON Leading Pure Water Analytics Part No. 84386 1875 Smart Calibrator for 770MAX Multiparameter Analyzer/Transmitter Instruction Manual INTRODUCTION This manual covers operation of the Mettler- Toledo
More informationBedford Falls Book Fairs Bedford Falls Book Fairs. Customer Bedford Falls BookScanner2 App Instructions TABLET
Customer Bedford Falls BookScanner2 App Instructions TABLET 1. Turn on tablet press and hold power button (top right corner) for 3 seconds then release. It should start to power on. This takes about 20
More informationInstallation of the PCMeasure Movement Sensor (30114)
1. Hardware: Installation of the PCMeasure Movement Sensor (30114) Connect the sensor to a serial or parallel port of the PC using one of the PCMeasure adaptors, or directly to the PCMeasure Ethernet Box.
More informationPortable Data Collector Series Z-9000 ( Version 1.0) User s Manual ZEBEX INDUSTRIES INC.
Portable Data Collector Series Z-9000 ( Version 1.0) User s Manual ZEBEX INDUSTRIES INC. WWW.ZEBEX.COM Revision History Changes to the original manual are listed below: Version Date Description of Version
More informationIO Ninja Hardware Manual
IO Ninja Hardware Manual Copyright Tibbo Technology 2000-2018 I IO Ninja Hardware Manual (NHM) Table of Contents Introduction 1 Serial Tap 1 Block Diagram... 4 Using the Serial... Tap 4 Wedge RS232 monitoring...
More informationEOS 5D Firmware Update Procedures
EOS 5D Firmware Update Procedures Outline for Firmware Update Procedures 1. Format the CF card used for the firmware update. Use the camera to format the CF card. 2. Download the firmware update file,
More informationASTRO-PHYSICS GTO CONTROL BOX FOR SERVO DRIVE Model GTOCP1
ASTRO-PHYSICS GTO CONTROL BOX FOR SERVO DRIVE Model GTOCP1 GTO CONTROL BOX GTOCP1 The GTO control box contains all of the circuitry to drive the two servo motors and the logic required to navigate the
More informationPTDT V Quick Installation & Reference Guide. Ver Battery Management Solutions by. PowerDesigners
PTDT+ 12-84V Quick Installation & Reference Guide Ver. 2.1 Battery Management Solutions by PowerDesigners Revision History Ver 1.0 12/13/04 BMS Ver 2.0 2/27/06 BMS Ver. 2.1 3/23/06 BMS New installation
More informationTechnical Advisory Bulletin
Date: Monday, December 13, 2010 Number: TAB-09-010 To: US Distributors Notice: GS3055-I & GS3060 Flash Update Utility This is to advise you that DSC has released the GS3055-I and GS3060 Flash Update Utility
More informationAltus APS3G Quick Start guide
Altus APS3G Quick Start guide Revision 1.0.1 Congratulations on purchasing your new Altus APS3G System. This Important Quick Start Guide contains information you need to set up and begin using your Altus
More informationPocket Pigs PDA Basic User Guide
Pocket Pigs PDA Basic User Guide Pocket Pigs Main Screen Tap an icon to navigate: 1) General set-up of work lists and data entry 2) Sows complete sow card history 3) Work list view action lists of all
More informationProfessional Edition (Release version 3.11x)
Professional Edition (Release version 3.11x) Palm OS MAC Tools Special Edition User Guide Copyright 2003, Advanced Merchant Solutions, Inc. All rights reserved. Pocket CrossCheck Professional End-User
More informationTo view the last sale paid out or previous sale, select a fueling position and hold the * (asterisks, or star) button.
EZ Config - This is the same software TMS uses to connect remotely from our factory. This a free software program that is required to program the EZ console, either with a direct connection from a PC via
More informationUser s Manual for 3JTech s Infrared Modem with palmone PDAs
User s Manual for 3JTech s Infrared Modem with palmone PDAs Users Manual User's Manual for 3JTech's Infrared Modem with palmone PDAs Users Manual: 1.1 Date: May 21, 2004 3JTech Co., Ltd. 342 Fu-Hsing N.
More informationGrape Sampler. Chapter contents
Grape Sampler Page 1 Grape Sampler Chapter contents Grape Sampler in the vineyard recording of yield estimate data 2 Installing Grape Sampler 2 W hat can go wrong? Palm Handhelds 3 When installing for
More informationA-Series Controller & Logic Boards
A-Series Controller & Logic Boards A-Series Controller General Port Connection Diagram 1. For LAN communication connect the Ethernet cable from the programming PC or network switch to the LAN port at the
More informationTone Alert and Ring Tone Amplifier
Tone Alert and Ring Tone Amplifier Tone Alert and Ring Tone Amplifier Unication supported products: Category Alphanumeric Numeric, Two-way messaging Model Alpha Gold, Alpha Elite and Alpha Gold Plus NP88,
More informationTargus Wireless Web Card
Targus Wireless Web Card TM Data-Capable Mobile Phone Wireless Web Card User s Guide 2 Chapter 1 - Introduction The World Is Your Network The Wireless Web Card (WWC) lets you connect your datacapable mobile
More informationSPMS SmartPage Messaging System
A division of NESS CORPORATION PTY LTD SPMS SmartPage Messaging System INSTALLATION AND USER MANUAL SmartPage Installation and User Manual V1.4 1. Contents 1. Contents... 1 2. Overview... 2 Introduction...
More informationSERVICE INSTRUCTIONS CONVERT OLD SFC TO NEW SFC WARNING WARNING WARNING
SERVICE INSTRUCTIONS CONVERT OLD SFC TO NEW SFC Technical Service Upgrade Instructions Please read complete instructions prior to starting. WARNING This upgrade kit shall be installed by a qualified service
More informationPhone Settings 26 Ringer Volume 26. Basic Calling Features 13 Help Online Services 43
1 Congratulations on purchasing your new VTech product. Before using this telephone, please read the Important safety instructions on page 89 of this manual. The information contained in this manual is
More informationAPS-3 Revision Important Quick Start Guide. Typical Box Contents
APS-3 Revision 3.0.0 Important Quick Start Guide Congratulations on purchasing your new APS-3 System. This Important Quick Start Guide contains information you need to set up and begin using your APS-3.
More informationCongratulations on the purchase of your new Clover Flex
Congratulations on the purchase of your new Clover Flex Set Up the Hardware What s included Clover Flex Charging cradle Receipt paper Power cord (2 for EU) Power brick Screwdriver Clover Flex Features
More informationEOS REBEL XSi / 450D Firmware Update Procedures Precaution
EOS REBEL XSi / 450D Firmware Update Procedures Precaution A power failure during the firmware writing operation may disable the camera. Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional)
More informationWindows. Updating Camera Firmware. Get ready
Updating Camera Firmware Windows Thank you for choosing a Nikon product. This guide describes how to perform this firmware update. If you are not confident that you can perform the update successfully,
More informationSMARTLINE WIRELESS INTERFACE SYSTEM INSTALLATION MANUAL
SMARTLINE WIRELESS INTERFACE SYSTEM INSTALLATION MANUAL SmartLine (Wireless) Installation Manual v1.9 1.Contents 2. Overview...2 Equipment List...2 Introduction... 2 Monitoring Software Compatibility...2
More informationProfessional, Creditable, Successful DGUS Quick Start V1.2.0 DGUS QUICK START. V1.2.0 Aug AMP DISPLAY INC. 1
DGUS QUICK START V1.2.0 Aug 2013 AMP DISPLAY INC. 1 www.ampdisplay.com Contents 1. Introduction... 3 2. What s it in the Sample Kit?... 4 2.1 DWIN DGUS LCM... 4 2.2 Peripherals... 4 2.3 Download DGUS Materials...
More informationEOS 30D Firmware Update Procedures Precaution
EOS 30D Firmware Update Procedures Precaution A power failure during the firmware writing operation may disable the camera. Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) ACK-E2
More informationProtime Elite Decoder Protime Decoder Manual and technical Specification
Protime Elite Decoder Protime Decoder Manual and technical Specification Version 08/2009 Table of contents TABLE OF CONTENTS 2 1. DESCRIPTION AND INSTALLATION 3 1.1. Front panel specifications - Protime
More informationThe following simple procedures should be performed prior to testing the 289H M relay card:
289H M LSS Installation & Operations Manual Start Up & Test Procedures Chapter 5 INTRODUCTION The information in this section of the manual provides the step by step procedures for conducting any testing
More informationTroubleshooting Q&A. My CLIÉ handheld is not working properly. About CLIE Launcher. I cannot perform a HotSync operation.
4-672-274-21 (1) http://www.clie-link.com My CLIÉ handheld is not working properly About CLIE Launcher I cannot perform a HotSync operation Error messages I cannot enter data properly How to operate basic
More informationMultiConnect Adapters
MultiConnect Adapters Serial-to-Serial Adapter Serial-to-Ethernet Adapter Quick Start Guide 2 Multi-Tech Systems, Inc. Quick Start Guide Introduction This guide shows you how to setup your MultiConnect
More information34 E Main Street, Suite 167, Smithtown, NY (888) Fax: 1(888)
34 E Main Street, Suite 167, Smithtown, NY 11787-1(888)270-4513 - Fax: 1(888)270-4513 www.idetect.net - Info@IDetect.net C o p y r i g h t 2 0 1 6 I D e t e c t, I n c. A l l R i g h t s R e s e r v e
More informationEOS 20Da Firmware Update Procedure Version 2.0.3
Precautions EOS 20Da Firmware Update Procedure Version 2.0.3 When the firmware update operations are finished, turn the camera off and remove battery from the camera for more than two seconds. This will
More informationSetting Up Your Handheld and Your Computer
Setting Up Your Handheld and Your Computer In this chapter What s in the box? System requirements Step 1: Charging your handheld Step 2: Turning on your handheld for the first time Step 3: Installing your
More informationBar Code Scanner Specifications for XL200 Controllers
Bar Code Scanner Specifications for XL200 Controllers Scanner Specifications Any scanner connected to an XL200 series controller must conform to the following communication specifications: Baud Rate: 9600
More informationPocket PC e 740 Data Backup and Restore Procedure
Pocket PC e 740 Data Backup and Restore Procedure Version 1.1 Chapter 1 Pocket PC Data Backup and Restore By PC Though Cradle Procedure Before User Data Backup 1-4 Making a Backup Procedure 5-8 Making
More informationHEALTHY TEEN SCREENER SOFTWARE MANUAL
HEALTHY TEEN SCREENER SOFTWARE MANUAL CONTENTS Contacts...2 System Requirements...2 The Healthy Teen Screener Secure Web Portal...2 Hot-Syncing the Palm...3 Maintenance of the Palm...4 Calibrating Your
More informationUnique Micro Design First Choice of Professional Systems Intergrators. Model 361 Terminal Keyboard Wedge User Manual
Model 361 User Manual Unique Micro Design First Choice of Professional Systems Intergrators Model 361 Terminal Keyboard Wedge User Manual Document Reference : DOC-M361-UM UMD Part Number : 6-0361-993-5
More informationPower. Document Part Number: This guide explains how the computer uses power. December 2005
Power Document Part Number: 393525-002 December 2005 This guide explains how the computer uses power. Contents 1 Power controls and lights 2 Power sources Connecting the AC adapter.......................
More informationDPM-3221 Digital DC Power Meter with data logging capability.
Introduction DPM-3221 Digital DC Power Meter with data logging capability. User Manual As a digital DC power meter, it measures the real time DC Voltage (5-60V), DC Current (0-200 A with the correct shunt),
More informationPocket PC backup/restore made easy
Pocket PC backup/restore made easy Last year in the October 2006 issue of the First Responder we had an article on backing up the PEAC-WMD software application to either a PC or to the flash memory on
More informationHardware Guide. HP Notebook Series. Document Part Number:
Hardware Guide HP Notebook Series Document Part Number: 355386-001 November 2003 This guide explains how to identify and use notebook hardware features, including connectors for external devices. It also
More informationEOS REBEL T2i / 550D Firmware Update Procedures Precaution
EOS REBEL T2i / 550D Firmware Update Procedures Precaution A power failure during the firmware writing operation may disable the camera. Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional)
More informationEOS 30D Firmware Update Procedures
EOS 30D Firmware Update Procedures Outline for Firmware Update Procedures 1. Format the CF card used for the firmware update. Use the camera to format the CF card. 2. Download the firmware update file,
More informationInstallation Instructions for: Channel Thermocouple Amplifier
Installation Instructions for: 30-2204 4 Channel Thermocouple Amplifier The Advanced Engine Management (AEM) 4 channel thermocouple amplifier revolutionizes temperature measurements by providing laboratory
More informationQuick User Manual. for. Naviter Oudie IGC
Quick User Manual for Naviter Oudie IGC Naviter d.o.o., Planina 3, 4000 Kranj, Slovenia www.naviter.com support@naviter.com Introduction Thank you for choosing Oudie IGC! Company Naviter is dedicated to
More informationtype : Title : 1 / Page : Version : Date : User s guide MNTload TECHNICAL DEPARTMENT User s guide MNTload
1 / 22 GA v.doc 2 / 22 Updates table ISSUE DATE REVISION DETAILS PREPARED BY 1.0 2005.June.06 Creation L.Hurand/I.lemblin 1.1 2005.June.22 Adding i6280 loading state L.Hurand/I.lemblin 1.2 2007.April.06
More informationStrain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB
Strain gauge Measuring Amplifier GSV-1A8 Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB GSV-1A8USB SubD1 (front side) GSV-1A8USB M12 (front side) GSV-1A16USB (rear side) GSV-1A8USB K6D (front side)
More informationInstallation and Operation Back-UPS BR1000G-IN / BR1500G-IN
Installation and Operation Back-UPS BR1000G-IN / BR1500G-IN Important Safety Information Read the instructions carefully to become familiar with the equipment before trying to install, operate, service
More informationTop Producer for Palm handhelds
Top Producer for Palm handhelds User Guide Top Producer Systems Phone number: 1-800-830-8300 E-mail: support@topproducer.com Web site: www.topproducer.com Fax number: 604.270.6365 Top Producer for Palm
More informationInstalling LE History Record Reader program software.
INSTALLATION & OPERATING INSTRUCTIONS FOR THE LE HISTORY RECORD READER These Instructions will inform you on how to install software to use the RS-232/USB Isolator- Adapter and your LE History Record Reader
More informationRKAT Audit Trail Module RK-LINK TM Software For the Radio Key 600 Series
RKAT Audit Trail Module RK-LINK TM Software For the Radio Key 600 Series INSTALLATION & OPERATING GUIDE Rev. B P/N 3321515 www.securakeystore.com (800) 878-7829 sales@securakeystore.com COPYRIGHT 2001
More informationIR-200F IrDA Mainboard Adapter
IR-200F IrDA Mainboard Adapter The VScom IrDA Mainboard Adapter enables infrared wireless data communication by connecting the IrDA dongle to the built-in mainboard IR header connectors of your desktop
More informationAccessory Guide. Docks and Modules
e Docks and Modules Single Dock 871-025-001 USB Host and Client Support with bay for charging an auxiliary battery pack. (7.5 L x 4.0 W x 2.3 T) Requires Power Supply (851-082-003 or 851-082-103) and countryspecific
More informationSD-50 Vehicle Dock. Introduction. Highlights. Ordering
Vehicle Dock Quick Specification Loud Speaker Dock for Intermec CN50 Front View Back View Introduction The SD-50 vehicle dock provides a simple method to produce outstanding audio from Intermec s CN50
More informationGetting to know MyPal
E8 Getting to know MyPal Front features Back features Bluetooth LED Wi-Fi LED Power LCD touch screen Camera lens Camera flash Speaker Removable back cover ASUS Launcher button Calendar button Microphone
More informationProcedure to Upgrade from B&W Maintenance Panel to TIB Color Touchscreen Door in a Working Maxum or Maxum II Analyzer Equipped With a SYSCON2
Procedure to Upgrade from B&W Maintenance Panel to TIB Color Touchscreen Door in a Working Maxum or Maxum II Analyzer Equipped With a SYSCON2 Difficulty Level: High Estimated time to execute: 3 Hours Revision
More informationBluetooth Connection Kit
Bluetooth Connection Kit Featuring the Socket Bluetooth Card and Windows CE software for adding Bluetooth wireless connectivity to the following mobile computers: Pocket PC 2000s Pocket PC 2002s Handheld
More informationPaperCut Fast Release (Network Card Reader) Manual
PaperCut Fast Release (Network Card Reader) Manual Contents 1 Overview 3 1.1 Supported Network Card Readers... 4 2 Installation 5 2.1 Setting up Hold/Release queues... 5 2.2 Configuring Network Card Reader...
More informationUsing the NEC MobilePro
4 Using the NEC MobilePro Powering On and Off Making Display Panel Adjustments Enabling the Suspend Switch Using Application Shortcut Keys Recording Voice Memos Using PC Cards Using CompactFlash Cards
More informationDigital Torque Gauge. User s Manual
Digital Torque Gauge User s Manual Content 1. Introduction 1.1 Overview 1 1.2 Indicator 2 1.3 Torque Sensor 3 1.4 Specifications 4 2. Operation 2.1 Test Preparation 5 2.2 Power on/off 5 2.3Testing 5 2.3.1
More informationFrequently Asked Questions
Model 881 SPORTSCAN Digital Sidescan Sonar Frequently Asked Questions What can I use to power the SportScan? The SportScan requires a DC voltage between 10 and 16 volts for proper operation (+12VDC @ 0.5A
More informationINSTRUCTION MANUAL Kingfisher Micro DVR w/ Button Cam SB-MSDVR660
INSTRUCTION MANUAL Kingfisher Micro DVR w/ Button Cam SB-MSDVR660 Revised: March 15, 2013 Thank you for purchasing from SafetyBasement.com! We appreciate your business. We made this simple manual to help
More informationTHUNDERBIRD INSTRUCTIONS HAND HELD ELECTRONIC TAG READER MODEL PR20
THUNDERBIRD HAND HELD ELECTRONIC TAG READER MODEL PR20 INSTRUCTIONS WARRANTY THUNDERBIRD Electronic Tag Readers Thunderbird warrants the PR20 reader against defective workmanship and faulty materials for
More informationUSER MANUAL EMIT MINI TIME RECORDER VERSION 4 AND THERMAL PRINTER
USER MANUAL EMIT MINI TIME RECORDER VERSION 4 AND THERMAL PRINTER (c) Emit 28.sep 2004, rev 3 Emit AS Tel: +47 22 91 03 00 Bank: 6011.05.80439 St. Halvards gt. 33 Fax: +47 22 91 03 01 WEB: www.emit.no
More informationGetting Started with Palm m100 Series Handhelds
Getting Started with Palm m100 Series Handhelds Copyright Copyright 2001-2002 Palm, Inc. All rights reserved. Graffiti, HotSync, and Palm OS are registered trademarks of Palm, Inc. The HotSync logo, Palm,
More informationCopyright IBM Corp FRONT - 1
FRONT PICTURE 1 IBM PS/2 EWS (Type 9533) HMM Supplement This package contains a supplement to the IBM Personal System/2 Hardware Maintenance Manual (part number 52G9971, form number S52G-9971-00). IBM,
More informationAS-CVTPROx00-0 Zone Bus/N2 Bus Interface Converter
Installation Instructions Issue Date June 11, 2002 AS-CVTPROx00-0 Zone Bus/ Interface Converter Ports The back of the CVTPRO (Figure 1) has ports for connection to a Personal Computer (PC) and the Palm
More informationWindows. Updating Camera Firmware. Get ready
Updating Camera Firmware Windows Thank you for choosing a Nikon product. This guide describes how to perform this firmware update. If you are not confident that you can perform the update successfully,
More informationThis manual covers 3Com U.S. Robotics faxmodems.
This manual covers 3Com U.S. Robotics faxmodems. 3Com, the 3Com logo, U.S. Robotics, and Winmodem are registered trademarks and Connections, RapidComm, and x2 are trademarks of 3Com Corporation. Windows
More informationStarter Guide Version Sphinx Access Control System
TC3XYMT/TC3XYNT Starter Guide Version 1.04.1 Sphinx Access Control System Page 1 1. Controller and Reader wiring...3 2. Connect the controller to PC...4 2.1. Setup the ID of Controller...4 2.2. Connect
More informationMEMEX YASNAC i80 MEMORY UPGRADE INSTALLATION MANUAL
MEMEX YASNAC i80 MEMORY UPGRADE INSTALLATION MANUAL Memex Inc. 105 3425 Harvester Rd., Burlington, Ontario, Canada L7N 3N1 Phone: 905-635-1540 Fax: 905-631-9640 Email: support@memex.ca www.memex.ca 2017
More informationmypos Mini - User Manual mypos Europe Ltd. mypos Mini En
mypos Mini - User Manual mypos Europe Ltd. mypos Mini En CONTENTS Introduction... 2 Scope... 2 Related documentation... 2 Internet connectivity... 2 Using mypos Mini with a mobile phone (via Bluetooth
More informationDeviser Part No.: TC500-DL Deviser Instruments, Inc. All rights reserved.
TC500 Ethernet Cabling Certifier Operation Manual Version 1.13 Deviser Part No.: TC500-DL Deviser Instruments, Inc. All rights reserved. Warranty This instrument is guaranteed for a period of 2 years
More informationUser Manual & Troubleshooting Guide
User Manual & Troubleshooting Guide Note: This manual covers all versions of Range-Express from Silver through to Platinum. If your software does not have some of the features included in this manual,
More informationConnecting the THP-700RTS to a Telephone and Radio Console - Summary. DynaMetric. Made in USA THP-700RTS
Connecting the to a Telephone and Radio Console - Summary RECORDER 700RTS 700RTS PHONE PIN HEADSET PIN JACK PIN PLUG* PIN JACK 1 1 MIC 1 1 Make same 2 2 EAR 2 2 as Phone 3 3 EAR 3 3 Jack 4 4 MIC 4 4 PIN
More informationUSER MANUAL MODEL 505M-CHC. Surge Protected DB-25 to RJ-45 Modular Adapter
USER MANUAL MODEL 505M-CHC Surge Protected DB-25 to RJ-45 Modular Adapter C E R T I F I E D An ISO-9001 Certified Company Part# 07M505MCHC-A Doc# 074281U, Rev. B Revised 1/21/08 SALES OFFICE (301) 975-1000
More informationALIOD100 UPGRADE USER'S MANUAL (revision 2.1)
ALIOD100 UPGRADE USER'S MANUAL (revision 2.1) 11002 Metric Blvd., Ste 100 Austin, TX 78758 USA phone: (512)-346-0077 fax: (512)-346-0088 email: info@lacosteromberg.com www.lacosteromberg.com Contents of
More informationHarbortronics Time-Lapse Package Troubleshooting Guide This document is intended to help diagnose any problems with your Time-Lapse Package.
This document is intended to help diagnose any problems with your Time-Lapse Package. Power Everything in the Time-Lapse Package (TLP) is powered by the large Lithium-Ion Polymer battery pack, made specifically
More informationQuick Guide. Extra Communication Card
Quick Guide Extra Communication Card Uninterruptible Power Supply System Version: 1.0 Table of Contents 1. Product Outlook... 3 2. Product Introduction... 3 2.2. RS232 port... 4 2.3. COMM. Slot... 4 2.4.
More informationSWC1090 configuration software for G.M. International Isolators series D1000 and E1000. Installation and use manual
SWC1090 configuration software for G.M. International Isolators series D1000 and E1000 Installation and use manual ISM0084-2 Installation and use of the SWC1090 calibration software Page 1 of 12 Index
More informationBB-303 Manual Baseboard for TMCM-303
BB-303 Manual Baseboard for TMCM-303 Trinamic Motion Control GmbH & Co. KG Sternstraße 67 D 20357 Hamburg, Germany http://www.trinamic.com BB-303 Manual (V1.04 / Jul 9th, 2007) 2 Contents 1 Features...
More informationUSER-MANUAL EMIT MINI TIME RECORDER VERSION 3 AND THERMAL PRINTER
USER-MANUAL EMIT MINI TIME RECORDER VERSION 3 AND THERMAL PRINTER (c) Emit 19.oct 2003, rev 3 Emit AS Tel: 22 91 03 00 Bank: 6011.05.80439 St. Halvards gt. 33 Fax: 22 91 03 01 WEB: www.emit.no 0192 OSLO
More informationFG-7000L Digital Force Gauge Operation Manual
FG-7000L Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationCompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology
CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology Featuring a Socket CompactFlash/SDIO card and Windows CE software for adding Bluetooth capability to the following mobile computers:
More informationSTANDALONE INTERFACES USB-DMX 512 & 1024 CHANNELS V.1.1
STANDALONE INTERFACES USB-DMX 512 & 1024 CHANNELS V.1.1 SUMMARY Hardware technical specifications... 3 Front Face of the 512 / 1024 channels interfaces... 4 Side Faces of the 512 / 1024 channels interfaces...
More informationOrion Jr. Purchasing Guide Rev. 1.2
www.orionbms.com Orion Jr. Purchasing Guide Rev. 1.2 The Orion Jr. BMS is a low cost battery management system designed to manage low voltage lithium ion battery packs up to 48V nominal. The Orion Jr.
More informationFrSky Horus X10S/X10 System
FrSky Horus X10S/X10 System FrOS Firmware Updating and OpenTX Flashing Using Windows Smart Port Flashing with X10S/X10 January 30, 2018 Index Page Overview 2 General Warnings 3 Preparing X10S/X10 For OpenTX
More informationBy Dr. Samaher Hussein Ali
Department of Information Networks The University of Babylon LECTURE NOTES ON Evolving Technology of Laptops By Dr. Samaher Hussein Ali College of Information Technology, University of Babylon, Iraq Samaher@itnet.uobabylon.edu.iq
More informationOperation Manual PFM Flex 2
Operation Manual PFM Flex 2 The new and unique PFM FLEX Concept comprises 4 different Instruments for Flow and Pressure measurements. From the simplest Flex 1 to the most advanced Flex 4. The differences
More informationucube USER MANUAL VERSION 1.2
ucube USER MANUAL VERSION 1.2 Contact ucube is designed and produced by YouTransactor, 32 rue Brancion 75015 Paris France. For any open questions, please contact your dedicated support. It may be, depending
More information