Lab 6-3 Configuring a Wireless Client

Transcription

1 Lab 6-3 Configuring a Wireless Client Topology Diagram Scenario Step 1 In this lab, you will install a Cisco Aironet wireless PC card on a laptop. Then you will also configure the Cisco Aironet Desktop Utility (ADU) to connect to an access point. Place the Cisco Aironet a/b/g Wireless Adapter into an open NIC slot on your laptop CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

2 Step 2 Once you have transferred the Installation Wizard software to your hard drive, double-click on it. The following is the first screen to appear. First Page of the Cisco Aironet Installation Wizard 2-16 CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

3 Step 3 Click on Next. Then select Install Client Utilities and Driver. Click on Next. Choose Install Client Utilities and Driver Step 4 On the next two screens, choose the default setting by clicking on Next unless instructed otherwise by your teacher CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

4 Choose Destination Location for Software Installation Select Program Folder for Software Installation 4-16 CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

5 Step 5 If you are running Microsoft Windows XP, you get a warning about using the Cisco ADU rather than the default Microsoft Wireless Configuration Manager. After this screen, you have the option to choose between the two. Choose Cisco ADU, because it is more capable than the one from Microsoft. Windows XP Warning 5-16 CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

6 Choose ADU as the Configuration Tool Step 6 Click on Yes to reboot your system at the end of the operation. On the next screen click OK. Reboot at the end of the operation Click OK to Continue 6-16 CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

7 Step 6 The Setup Status screen will show the status of the software installation. Setup Status Step 7 When Setup is complete, reboot the computer by clicking OK. Click OK to Continue 7-16 CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

8 Step 8 After the computer has rebooted, click on the shortcut to the Aironet Desktop Utility (ADU). Step 9 Shortcut to Aironet Desktop Utility The Current Status screen appears by default. In the image below, the PC has found a production wireless network and associated with its access point. If your lab is close to a production wireless network, you may have a similar result. If your PC is not close to a production network, then your Current Status screen will look different. Current Status Screen 8-16 CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

9 Step 10 Whether or not you are connected to a production wireless network, you now want to connect to the lab network. Click on the Profile Management tab next to the Current Status tab. Then click on the New button in the upper right hand corner of the screen. Step 11 Profile Management Screen Enter the profile name ccnppod. Use the SSID of ccnppod CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

10 SSID configuration Step 12 Select the Security tab. Select None CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

11 Security Options Step 13 Select the Advanced tab. Uncheck 5GHz 54 Mbps because you are not using a. Then click OK CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

12 Advanced Configuration Options Step 14 After you click on OK, you are returned to the Profile Management screen. In addition to the Default profile, there is now the ccnppod profile. Click the Activate button on the right hand side of the screen CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

13 Click on the Activate Button Step 15 After clicking the Activate button, your screen will look like the image below. ccnppod profile activated CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

14 Step 16 Click on the Current Status tab, and your screen will look similar to the image below. Current Status of ccnppod profile Step 17 The Diagnostics tab shows transmit and receive data about the wireless connection CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

15 Diagnostics Screen Step 18 To run tests on the wireless card and see the results, click the Troubleshooting button CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc

16 Running Troubleshooting Tests CCNP: Building Multilayer Switched Networks v5.0 - Lab 6-3 Copyright 2006, Cisco Systems, Inc