A176 Cyclone. GPGPU Fanless Small FF RediBuilt Supercomputer. IT and Instrumentation for industry. Aitech I/O

Transcription

1 The A176 Cyclone is the smallest and most powerful Rugged-GPGPU, ideally suited for distributed systems. Its 256 CUDA cores reach 1 TFLOPS, and it consumes less than 17W at full load (8-10W at typical load), providing all the power you need for local processing right where you need it, next to your sensors. With its compact size, the A176 Cyclone is the most advanced solution for video and signal processing for the next generation of autonomous vehicles, surveillance and targeting systems, EW systems, and many other applications. SWaP Optimized, Rugged, Ultra Small Form Factor System NVIDIA Jetson TX1 System on Module NVIDIA Maxwell Architecture GPU, with 256 CUDA cores ARM Cortex A57 Quad-Core CPU 1 TFLOPS H.264/H.265 HW Encoder Best Available Performance per Watt 60 GFLOPS/W SATA SSD with Quick Erase & Secure Erase 4 GB LPDDR4 I/O Gigabit Ethernet USB 2.0 UART Serial Outputs DVI/HDMI SDI Inputs Composite SDI Stereo HD Audio Output Discretes Composite STANAG DVI/HDMI Camera Link CUDA, OpenGL, OpenGL ES, EGL 8-10 W Typical Development Platforms Available

2 Mini SATA SSD Micro SD Slot Future Option Temp. Sensor ETR I 2 C NVIDIA Jetson TX1 NVIDIA GPU Quad-Core ARM CPU 4GB RAM LPDDR4 16GB Flash emmc 5.1 System on Module GbE GbE GLAN PCIe x1 Controller USB 2.0 UART 3 2 Discrete I/O 8 HD Audio Output CODEC DVI/HDMI Output edp DVI/HDMI Output DSI SDI Output DSI STANAG Output DDR3 SDRAM FPGA Composite Output SDI Input DVI/HDMI Input Camera Link Input Future Option Composite Input 4 Composite Input Factory Config 2 Factory Config PCIe x1 Mini PCIe Site Mini PCIe I/O I/O Connector

3 System Architecture System on Module NVIDIA Jetson TX1 GPU NVIDIA Maxwell GPU Architecture 256 Shaders/CUDA cores OpenGL ES Shader Performance up to 1024 GFLOPS (fp16) CUDA 7.0 OpenGL 4.5 OpenGL ES 3.1 Two independent display controllers CPU ARM Cortex A57 Quad-Core 1.9 GHz L1 Cache: 48 KB instruction, 32 KB data per core; L2 Cache: 2 MB Unified System Resources Multi-standard /JPEG Decoder/Encoder, HW Encoding for H.264/H.265 Dynamic voltage and frequency scaling On-board Temperature Sensor Elapsed Time Recorder Memory Resources RAM emmc 4 GB LPDDR4 in dual channels operates at 3200 MT/s 16 GB emmc 5.1 (boot source) Mini SATA SSD 32 GB Mini SATA SSD SLC Flash with Quick Erase and Secure Erase support (additional options may be available per customer request, contact an representative for more information) Micro SD Micro SD Slot (future option) Security HW acceleration for AES 128/192/256 encryption and decryption HW acceleration for AES CMAC, SHA-1, and SHA-256 algorithms 2048-bit RSA HW HW Random Number Generator (RNG) SP Quick Erase and Secure Erase SSD support

4 I/O USB Gigabit Ethernet (10/100/1000Base-T) 2 Serial Ports (RS-232 UART) 2 Discrete I/O (Single-Ended) 8 Audio Output (Stereo HD) 1 Outputs (1) Inputs DVI (single-link) / HDMI 2 SDI (480/60i, 576/50i) Composite (RS-170A [NTSC]/PAL) 1 (2) (future option) STANAG 3350 (Class B and C) Composite (RS-170A [NTSC]/PAL) DVI (single-link) / HDMI SDI (480/60i, 576/50i) Camera Link 1 (2) (future option) 2 (only one channel available at a time), or 8 (with optional mini PCIe frame grabber, all channels available simultaneously), or 4 (future option, only one channel available at a time) Notes: (1) Up to two independent video outputs can be active simultaneously (2) Composite Output and STANAG Output channels are clones Expansion Options Site Specifications Supports standard mini PCIe modules PCIe x1 interface I/O signals from installed mini PCIe modules routed to system I/O connector Available Modules Composite Frame Grabber provides 8 composite video inputs, all channels available simultaneously Additional options may be available per customer request, contact an representative for more info Software Linux OS pre-installed L4T (Linux for Tegra), a lightly modified Ubuntu-based distribution Mechanical Dimensions 105 x 105 x 30 mm [4.13 x 4.13 x 1.18"] Weight < 1 kg [2.2 lbs.]

5 Power Input Power Wide input voltage range V DC steady state operation 12 V DC turn-on threshold Input reverse polarity protection (up to 32 V DC) EMI/RFI input filter On-board supplies isolated from external supply MIL-STD-704 and MIL-STD-1275 compliant Power Consumption 5 W idle 8-10 W under typical CUDA load 17 W when System on Module is fully utilized Environmental Operating Temp. -40 to +70 C Rain MIL-STD-810G, Method 506.5, Procedure I Non-Operating Temp. -55 to +100 C Dust MIL-STD-810G, Method 510.5, Procedure I & II Vibration V2 per VITA 47 Salt Fog MIL-STD-810G, Method Operating Shock OS1 per VITA 47 Bench Handling MIL-STD-810G, Method 516.6, Procedure VI Altitude -1,500 to +60,000 ft. (1) Ingress Protection IP65 Relative Humidity 0 100% EMI/RFI MIL-STD-461 Notes: (1) Depending on temperature and system power dissipation

6 Ordering Information System On Module 1 = NVIDIA Jetson TX1 Mini PCIe Card 0 = None 1 = Composite Frame Grabber A Ruggedization 2 = Rugged SATA SSD 0 = None 2 = 32 GB SLC Reserved Configuration No. To be assigned by Example: 2A Optional Accessories MCS Set of Front Panel Mating Connectors Starter Kit External Power Supply J1 Power Cable J2 I/O Cable Development Platform Development platforms are available as an option, which include: EV176 A176 Evaluation System I/O Cables and Power Supply Software installed/configured by latest available OS release, development tools, CUDA examples Contact your representative for additional information Contact Contact your sales representative for additional product information, and for inquiries regarding customized configurations of the A176 and additional software support. All names, products, and/or services mentioned are trademarks or registered trademarks of their respective holders. All information contained herein is subject to change without notice.