Ordering Guide of the FOSC Splicing Trays and Storage Baskets

Transcription

1 Page 1 of Ordering Guide of the FOSC Splicing Trays and Storage Baskets This document provides assistance with the selection of FOSC trays and storage baskets for use in FOSC closures. It includes the following sections: 1 Product description 2 2 Ordering information FOSC trays (part of closure kit) FOSC trays (separate ordering) To fit in closure size AS To fit in closure size A To fit in closure size B To fit in closure size D FOSC storage baskets 5 3 Product guide Product description FOSC splicing tray size AS FOSC splicing tray size A FOSC splicing tray size B FOSC splicing tray size D FOSC storage basket Characteristics and capacities FOSC splicing tray size AS FOSC splicing tray size A FOSC splicing tray size B FOSC splicing tray size D FOSC storage basket 13

2 Page 2 of Product description FOSC splicing trays are designed to store fibers and in a controlled way. The same proven fiber routing procedures can be used in all the network elements that accept FOSC trays. The arrangement of the fiber and is such that fiber bending is controlled to conform with minimum bend radius requirements in all parts of the tray. The hinged feature of the trays provides protection of the fiber as well as easy access. Different sizes are available (A, B and D) in relation to the different closures sizes. Two tray layouts are available: one with splice modules in the centre of the tray (also called US tray layout), and one with the at the exterior of the tray (called the European tray layout): splice modules in the center of the tray (US tray layout) at the exterior of the tray (European tray layout) Each tray size is available for different splice capacities and for different types of (heatshrinkable, ANT and most mechanical ). A Storage Basket is a slack tray for FOSC closures to store extra or uncut fiber lengths.

3 Page 3 of Ordering information FOSC trays can be ordered as part of the closure kit. In that case, part of the closure name string is defined by the splicing tray type. FOSC trays can also be ordered separately. Available FOSC trays are listed in section FOSC trays (part of closure kit) If FOSC trays are ordered as part of a closure kit, the digits mentioned in the grey field should be used in the ordering description of the closure: Closure size FOSC400AS FOSC400A8 FOSC400A4 FOSC400A8 FOSC450BS FOSC500B FOSC400B2 FOSC400B4 FOSC450B6 FOSC400D5 FOSC450D6 FOSC600C FOSC600D Splice storage in modules No Yes No Yes No Yes Splicing tray reference (single fiber) S6 12 S08 12 S12 36 A6 16 S16 16 S A16 24 A24 72 S24 A72 A24 S96 L96 A96 Splicing tray reference (ribbon) 4R4 6R4 RT Refer to section for a drawing and the splice capacity of the tray. Section shows all characteristics of each tray. For example: FOSC400B4S241NNN is a B size FOSC400 B size closure with 1 S24 splicing tray (to hold 24 heatshrinkable splice protectors inline/stacked).

4 Page 4 of FOSC trays (separate ordering) To fit in closure size AS or A8 For tray characteristics refer to section Name Qty/Pk Description FOSCASTRAYS61 1 pc Thin A tray for 6 heatshrink splice protectors at the exterior of the tray. FOSCASTRAYA61 1 pc Thin A tray for 6 ANT splice protectors at the exterior of the tray To fit in closure size A4 or A8 For tray characteristics refer to section Name Qty/Pk Description FOSCATRAYS081 1 pc A tray for 8 stacked heatshrink splice protectors at the exterior of the tray. FOSCATRAYS161 1 pc A tray for 16 stacked heatshrink splice protectors at the exterior of the tray. FOSCATRAYS241 1 pc A tray for 24 stacked heatshrink splice protectors at the exterior of the tray. FOSCATRAYA16 1 pc A tray for 16 ANT splice protectors at the exterior of the tray. FOSCATRAYA24 1 pc A tray for 24 ANT splice protectors at the exterior of the tray. FOSCATRAY4R41 1 pc A tray for 4 ribbon 4 splice protectors at the exterior of the tray. FOSCACCATRAY12 1 pc A tray with 2 splicing modules for 6 each. FOSCACCATRAY16 1 pc A tray with 2 splicing modules for 8 each. FOSCACCATRAY24 1 pc A tray with 2 splicing modules for 12 each To fit in closure size B For tray characteristics refer to section Name Qty/Pk Description FOSCBTRAYS121 1 pc B tray for 12 stacked heatshrink splice protectors at the exterior of the tray. FOSCBTRAYS241 1 pc B tray for 24 stacked heatshrink splice protectors at the exterior of the tray. FOSCBTRAYA241 1 pc B tray for 24 ANT splice protectors at the exterior of the tray. FOSCBTRAY6R41 1 pc B tray for 6 ribbon 4 splice protectors at the exterior of the tray. FOSCBTRAY121 1 pc B tray with 2 splicing modules for 6 each. FOSCBTRAY161 1 pc B tray with 2 splicing modules for 8 each. FOSCBTRAY241 1 pc B tray with 2 splicing modules for 12 each.

5 Page 5 of To fit in closure size D For tray characteristics refer to section Name Qty/Pk Description FOSCDTRAY361 1 pc D tray with 6 splicing modules for 6 heat shrink or mechanical each. FOSCDTRAY481 1 pc D tray with 6 splicing modules for 8 heat shrink each. FOSCDTRAY721 1 pc D tray with 6 splicing modules for 12 heat shrink each. FOSCDTRAYA721 1 pc D tray with 6 splicing modules for 12 ANT each. FOSCDTRAYS961 1 pc D tray with 8 splicing modules for 12 stacked short heat shrink each. FOSCDTRAYL961 1 pc D tray with 8 splicing modules for 12 stacked long heat shrink each. FOSCDTRAYA961 1 pc D tray with 6 splicing modules for 12 ANT each. FOSCDTRAYRT241 1 pc D tray with 4 stacked splicing modules for 6 ribbon FOSC storage baskets Name Qty/Pk Description FOSCABASKET 1 pc Asize closure: Slack tray to store express stranded fiber & ribbon fiber. FOSCBBASKETLBT 1 pc Bsize closure: Loose buffer tube slack tray to store extra or uncut lengths in a Bsize closure. FOSCACCBBASKET 1 pc Bsize closure: ribbon storage FOSCDBASKET 1 pc Dsize closure: storage basket. FOSCACCDBASKET TALL 1 pc Dsize closure: tall storage basket

6 Page 6 of Product guide 3.1 Product description FOSC splicing tray size AS FOSC tray type (see section 2.1) Splice capacity Stacked SMOUV or nonstacked ANT Non stacked SMOUV Thin A trays S6 A FOSC splicing tray size A FOSC tray type (see section 2.1) A trays Splice capacity Stacked SMOUV or nonstacked ANT Non stacked SMOUV 12 (2x SM6) 16 (2x SM8) 24 (2x SM12) S08 S16 A16 4R R4 S24 A Notes: Drawings are just examples, different splice holders are possible. SMx: splicing module for x

7 Page 7 of FOSC splicing tray size B FOSC tray type (see section 2.1) B trays Splice capacity Stacked SMOUV or nonstacked ANT Non stacked SMOUV 12 (2x SM6) 16 (2x SM8) 24 (2x SM12) S12 S24 A24 6R R FOSC splicing tray size D FOSC tray type (see section 2.1) D trays A72 S96 L96 A96 Splice capacity Stacked SMOUV or nonstacked ANT 72 (ANT) 96 (smouv 45mm) 96 (smouv 60mm) 96 (ANT) Non stacked SMOUV 36 (6x SM6) 48 (6x SM8) 72 (6x SM12) RT 24R12 (4 stacked modules, each module for 6 mass ) Notes: Drawings are just examples, different splice holders are possible. SMx: splicing module for x

8 Page 8 of FOSC storage basket A size storage basket FOSCABASKET Slack tray to store expressed stranded fiber & ribbon fiber in an A size closure. BAS006.JPG B size storage basket FOSCBBASKETLBT Loose buffer tube slack tray to store extra or uncut fiber lengths in a B size closure. BAS003.JPG B size storage basket FOSCACCBBASKET Storage basket to store loose buffer tube, bare fiber or ribbon lengths in a B size closure. 7N3K4319.JPG D size storage basket FOSCDBASKET Storage basket to store extra or uncut fiber lengths in a D size closure. BAS001.JPG D size tall storage basket FOSCACCDBASKETTALL Storage basket to store extra or uncut fiber lengths in a D size closure. 7N3K4320.JPG

9 Page 9 of Characteristics and capacities FOSC splicing tray size AS ASsize Parameter S6 A6 Tray thickness (mm) 4 4 Maximum number of heatshrinkable 250 µm (*) µm (*) 2 Maximum number of ANT 250 µm (*) µm (*) 2 Fiber length storage (mm) at each side of the splice Minimum Maximum 250 µm (*) µm (*) Installed heatshrinkable splice protector dimensions Minimum Ø (mm) 2.2 Maximum Ø (mm) 2.8 Accepts 45 mm SMOUV Yes Accepts 60 mm SMOUV Yes * : 250 or 900 µm specifies the diameter of the fiber stored in the tray.

10 Page 10 of FOSC splicing tray size A Asize Parameter S08 S16 A16 S24 A24 4R Tray thickness (mm) Maximum number of heatshrinkable 250 µm (*) µm (*) Ribbon 4 mass 4 4 Ribbon 8 mass 1 2 Ribbon 12 mass Maximum number of most mechanical 250 µm (*) µm (*) 6 Maximum number of ANT 250 µm (*) µm (*) 2 2 Fiber length storage (mm) at each side of the splice Minimum Maximum 250 µm (*) µm (*) Ribbon Ribbon Ribbon 12 Installed heatshrinkable splice protector dimensions Minimum Ø (mm) Maximum Ø (mm) Accepts 45 mm SMOUV Yes Yes Yes No No Yes Accepts 60 mm SMOUV Yes No No Yes Yes Yes Accepts ribbon SMOUV No No No Yes Yes No No * : 250 or 900 µm specifies the diameter of the fiber stored in the tray.

11 Page 11 of FOSC splicing tray size B Bsize Parameter S12 S24 A24 6R Tray thickness (mm) Maximum number of heatshrinkable 250 µm (*) µm (*) Ribbon 4 mass 6 6 Ribbon 8 mass 1 4 Ribbon 12 mass 1 1 Maximum number of most mechanical 250 µm (*) µm (*) 8 Maximum number of ANT 250 µm (*) µm (*) 4 Fiber length storage (mm) at each side of the splice Minimum Maximum 250 µm (*) µm (*) Ribbon Ribbon Ribbon Installed heatshrinkable splice protector dimensions Minimum Ø (mm) Maximum Ø (mm) Accepts 45 mm SMOUV Yes Yes No No Yes Accepts 60 mm SMOUV Yes No Yes Yes Yes Accepts ribbon SMOUV No No Yes Yes No No * : 250 or 900 µm specifies the diameter of the fiber stored in the tray.

12 Page 12 of FOSC splicing tray size D Dsize Parameter A72 S96 L96 A96 RT24 Tray thickness (mm) Maximum number of heatshrinkable 250 µm (*) µm (*) Ribbon 4 mass 24 Ribbon 8 mass 24 Ribbon 12 mass 24 Maximum number of most mechanical 250 µm (*) µm (*) 24 Maximum number of ANT 250 µm (*) µm (*) Fiber length storage (mm) at each side of the splice Minimum Maximum 250 µm (*) µm (*) Ribbon Ribbon Ribbon Installed heatshrinkable splice protector dimensions Minimum Ø (mm) Maximum Ø (mm) Accepts 45 mm SMOUV Yes Yes Yes Yes No Accepts 60 mm SMOUV Yes Yes Yes No Yes Accepts ribbon SMOUV No No No No No Yes * : 250 or 900 µm specifies the diameter of the fiber stored in the tray.

13 Page 13 of FOSC storage basket Abasket Bbasket Dbasket Tbasket Thickness (mm) # occupied trays Max. fiber length storage Looped loose tubes 6 tubes of 2.4 m 8 tubes of 2.4 m 24 tubes of 2.6 m 24 tubes of 3 m Looped ribbon 12 6 ribbons of 2.4 m 8 ribbons of 2.4 m 48 ribbons of 2.6 m 72 ribbons of 3 m Tyco Electronics Raychem NV Telecom Outside Plant Diestsesteenweg 692 B3010 KesselLo, Belgium All of this information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Tyco and FOSC are trademarks. Copyright Tyco Electronics 2001