Q&As. IBM Sterling Connect:Direct, Administration. Pass IBM Exam with 100% Guarantee

Transcription

1 Q&As IBM Sterling Connect:Direct, Administration Pass IBM Exam with 100% Guarantee Free Download Real Questions & Answers PDF and VCE file from: 100% Passing Guarantee 100% Money Back Assurance Following Questions and Answers are all new published by IBM Official Exam Center PDF Dumps Study Guide Braindumps 1 / 11

2 QUESTION 1 A Sterling Connect:Direct for Windows administrator wants to implement Sterling External Authentication Server (SEAS) to improve the security of its environment. Which statement regarding the capability of SEAS is FALSE? A. Validates the certificate chain. B. Returns attributes associated with the incoming certificate. C. Validates certificates against one or more Certificate Revocation Lists (CRLs) that are stored on an LDAP server. D. Defines an inbound node definition for each trading partner connection from outside the company and an outbound node definition for everycompany server to which SEAS will connect. Correct Answer: D QUESTION 2 In Sterling Connect:Direct for UNIX, which configuration file stores the ndm.node:name parameter? A. msgfile.cfg B. userfile.cfg C. netmap.cfg D. initparm.cfg Correct Answer: D QUESTION 3 A Sterling Connect:Direct for Windows or UNIX administrator installed a node in a cluster environment and successfully completed the first Connect:Direct process to a remote node. After initiating a cluster fail-over, the next process is rejected by the same remote node indicating a netmap.check failure. Which action on the local Connect:Direct will resolve the problem? A. Disable netmap.check. B. Set the outgoing.address parameter. C. Restart the node and submit the process again. D. Set the alt.comm.outbound parameter in the remote node\\'s netmap entry. Correct Answer: B QUESTION PDF Dumps Study Guide Braindumps 2 / 11

3 A Sterling Connect:Direct for UNIX administrator needs to enable the node named CDLOCAL to exchange data with a remote node named CDREMOTE using Secure+ with SSL protocol. Both nodes will use server authentication level, and external authentication must not be enabled. The administrator will use the Secure+ Command Line Interface (SPCLI) to configure the Secure+. The administrator has saved the trusted root certificate with filename: /ibm/mft/cdunix41/ndm/secure+/certificates/cdremote_trusted.txt The Key Certificate file is: /ibm/mft/cdunix41/ndm/secure+/certificates/keycert.txt Which sequence of commands will accomplish this task on the CDLOCAL side? A. sync netmap path=/ibm/mft/cdunix41/ndm/cfg/cdlocal/netmap.cfg name=cdremote; update remotenode name=cdremote protocol=ssl override=n SSLTLSTRUSTEDROOTCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/ CDREMOTE_tru sted.txt SSLTLSCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/keycert.txt SSLTLSCERTPASSPHRASE=myprivkeypassword SslTlsEnableClientAuth=n SslTlsSeaEnable=y SeaCertValDef=CDREMOTESEA SSLTLSENABLECIPHER=all; B. sync netmap path=/ibm/mft/cdunix41/ndm/cfg/cdlocal/netmap.cfg name=cdlocal; update remotenode name=cdremote protocol=ssl override=n SSLTLSTRUSTEDROOTCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/CDREMOTE_tru sted.txt SSLTLSCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/keycert.txt SSLTLSCERTPASSPHRASE=myprivkeypassword SslTlsEnableClientAuth=n SslTlsSeaEnable=n SSLTLSENABLECIPHER=all; C. sync netmap path=/ibm/mft/cdunix41/ndm/cfg/cdlocal/netmap.cfg name=*; update remotenode name=cdremote protocol=ssl override=n SSLTLSTRUSTEDROOTCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/CDREMOTE_tru sted.txt SSLTLSCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/keycert.txt SSLTLSCERTPASSPHRASE=myprivkeypassword SslTlsEnableClientAuth=n SslTlsSeaEnable=n SSLTLSENABLECIPHER=all; D. sync netmap path=/ibm/mft/cdunix41/ndm/cfg/cdlocal/netmap.cfg name=*; update remotenode name=cdremote protocol=ssl override=n SSLTLSTRUSTEDROOTCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/keycert.txt SSLTLSCERTFILE=/ibm/mft/cdunix41/ndm/secure+/certificates/CDREMOTE_trusted.txt SSLTLSCERTPASSPHRASE=myprivkeypassword SslTlsEnableClientAuth=n SslTlsSeaEnable=n SSLTLSENABLECIPHER=all; Correct Answer: C QUESTION 5 A Sterling Connect:Direct for Windows and UNIX user is troubleshooting a problem for either changing, deleting, selecting or terminating a process. Which diagnostic trace option should be used? A. cmgr B. pmgr C. smgr D. comm Correct Answer: B PDF Dumps Study Guide Braindumps 3 / 11

4 QUESTION 6 The Sterling Connect:Direct for UNIX administrator needs to restrict the use of operating system commands and special characters in a run task or run job statement. What initialization parameter should be set? A. cmd=y B. ulimit=y C. log.command=y D. continue.on.exception=y QUESTION 7 An administrator is installing Sterling Connect:Direct for UNIX and it needs to be set-up for high availability. How does Connect:Direct for UNIX need to be installed? A. Install on a shared file system and configure the cluster environment. B. Install on each individual server\\'s file system in the cluster and configure. C. Install on one server and copy to each of the other server\\'s file system in the cluster. D. Select the "Install cluster" option during installation and specify server addresses. QUESTION 8 A Sterling Connect:Direct for Windows administrator included a new remote node definition into netmap according to the exhibit below: PDF Dumps Study Guide Braindumps 4 / 11

5 When the administrator submitted a process to this remote node, the first attempt to establish the session with address failed due a network connection failure. What is the expected behavior for this process? A. It will retry using the maximum of 10 attempts to establish the session with address B. It will try once with address If the session is not established with then it will retry using the maximum of 10attempts to establish the session with address C. It will retry using the maximum of 5 attempts to establish the session with address If the session is not established then itwill retry using the maximum of 5 attempts to establish the session with address D. It will retry using the maximum of 10 attempts to establish the session with address If the session is not established then itwill retry using the maximum of 10 attempts to establish the session with address Correct Answer: BC QUESTION 9 The SNODE states that before any data exchange on the server side, the SSL certificate exchange must be configured using the Client Authentication (server-client authentication) method. Which two certificates should the SNODE request from the PNODE to complete the setup? A. Private Certificate B. Certificate Revocation List (CRL) C. Certificate Signing Request (CSR) D. Certificate Authority (CA) root certificate PDF Dumps Study Guide Braindumps 5 / 11

6 E. Certificate Authority (CA) intermediate certificate(s) Correct Answer: DE QUESTION 10 A Sterling Connect:Direct for UNIX administrator needs to configure Connect:Direct to authenticate remote users. Company policy dictates that each remote user must have its own unique entry in the User Authorization File. What type of record would the administrator use if the remote user is not passing snodeid? A. Submitter id B. Local user record C. User proxy record D. Remote node record Correct Answer: C QUESTION 11 A Sterling Connect:Direct for z/os administrator navigated to the Secure+ Admin Tool: Main Screen?shown here: Which Connect:Direct Secure+ remote node supports the STS encryption protocol? A. SECURE.REMOTE01 B. SECURE.REMOTE PDF Dumps Study Guide Braindumps 6 / 11

7 C. SECURE.REMOTE03 D. SECURE.REMOTE04 Correct Answer: B QUESTION 12 An administrator needs to implement Trusted Node security in Sterling Connect:Direct for z/os. Which two of the following actions must the administrator take? A. Add the remote node name to the Authorization file. B. Add the remote node name to the Stage1 security exit. C. Add the remote node name to the Stage2 security exit. D. Verify that the fifth positional parameter in the netmap is set correctly. E. Code the Stage2 security exit to examine the SQEXTNOD flag in the SQCB. Correct Answer: DE QUESTION 13 A company has implemented Sterling Connect:Direct for UNIX in their new environment and the administrator has been tasked to add users so they can gain access to Connect:Direct. What configuration file needs to be modified? A. userfile.cfg B. ndmapi.cfg C. netmap.cfg D. initparm.cfg QUESTION 14 A Sterling Connect:Direct for UNIX administrator was tasked to automate Connect:Direct processes. The Connect:Direct File Agent application has been chosen to perform this task. File Agent submits a process to a: A. CDJAI. B. SPCLI. C. PNODE. D. SNODE PDF Dumps Study Guide Braindumps 7 / 11

8 Correct Answer: C QUESTION 15 A Sterling Connect:Direct for UNIX administrator has private keys that were generated by Sterling Certificate Wizard version , and were not encrypted with a FIPS approved algorithm. Which utility is used to convert existing private keys to FIPS approved keys? A. SPCLI B. cdcust C. SPAdmin D. OpenSSL Correct Answer: D QUESTION 16 When using checkpointing with TCP/IP or LU62, what node records the checkpoint record? A. The sending node. B. The receiving node. C. Both the sending and receiving nodes. D. Neither the sending nor receiving nodes. Correct Answer: B QUESTION 17 Using the Sterling Certificate Wizard, what certificate elements are needed to validate a keycert certificate file? A. Passphrase, Keycert file, Public Key Certificate file, Trusted Root file B. Passphrase, Keycert file, Public Key Certificate file, Certificate Signing Request file C. Keycert file, Private Key file, Trusted Root file, Self-Signed Certificate file D. Keycert file, Private Key filename, Public Key Certificate file, Trusted Root file QUESTION 18 A company is required to have secure transfers but has decided not to use SSL/TLS. What is required to perform an PDF Dumps Study Guide Braindumps 8 / 11

9 STS Secure+ transmission? A. Exchange ciphers. B. Exchange certificates. C. Exchange trusted certificate authority. D. Exchange authentication and signature keys. Correct Answer: D QUESTION 19 Which SYSOPTS uses the correct RUN TASK syntax for a Sterling Connect:Direct for UNIX process? A. sysopts = "unix command;unix command;unix command" B. sysopts = ":unix command:unix command:unix command:" C. sysopts = "\\'unix command\\',\\'unix command\\',"unix command"" D. sysopts = "cmd(unix command,unix command,unix command)" QUESTION 20 A Sterling Connect:Direct for z/os administrator navigated to the CHANGE PROCESS Screen? shown here: PDF Dumps Study Guide Braindumps 9 / 11

10 The administrator can use the RESTART ALTERATIONS field to do which of the following? A. Restart at beginning of transmission. B. Restart at the last checkpoint interval. C. Restart at any prior checkpoint interval. B. Restart at a specific Partitioned Data Set member.d.restart at a specific Partitioned Data Set member PDF Dumps Study Guide Braindumps PDF Dumps Study Guide Braindumps 10 / 11

11 Powered by TCPDF ( To Read the Whole Q&As, please purchase the Complete Version from Our website. Try our product! 100% Guaranteed Success 100% Money Back Guarantee 365 Days Free Update Instant Download After Purchase 24x7 Customer Support Average 99.9% Success Rate More than 800,000 Satisfied Customers Worldwide Multi-Platform capabilities - Windows, Mac, Android, iphone, ipod, ipad, Kindle We provide exam PDF and VCE of Cisco, Microsoft, IBM, CompTIA, Oracle and other IT Certifications. You can view Vendor list of All Certification Exams offered: Need Help Please provide as much detail as possible so we can best assist you. To update a previously submitted ticket: Any charges made through this site will appear as Global Simulators Limited. All trademarks are the property of their respective owners. Copyright pass4lead, All Rights Reserved PDF Dumps Study Guide Braindumps 11 / 11