Release Notes. PQSys. Release Notes. WinPQ smart and Firmware PQI-DA smart. We take care of it.

Transcription

1 Release Notes We take care of it. PQSys Release Notes WinPQ smart and Firmware PQI-DA smart

2 Firmware (v11544) Improvements and Fixes: [DISPLAY] fixed some translations and improved screensaver behavior Features: [IEC 61850] adapted buffer size for ICD File [DSP] frequency calculation of 10/12T data directly based on zero crossings of reference phase [DSP] implementation of RVC flagging/status according to EN Edition 3.0 : , Section Release notes WinPQ smart 2

3 Firmware (v11193) Improvements and Fixes: [DISPLAY] fixed display driver which caused shifted and faulty screens Release notes WinPQ smart 3

4 Firmware (v10447) Improvements and Fixes: [PQAPPL] changed upper limit of current transducer factor [PQAPPL] increased lower limit of relative voltages-significance threshold [LANG] fixed some German, French, Polish and English translations Features: [LANG] added Dutch and Czech translation files [MENU] implemented some range checks to prevent a faulty configuration [MODBUS] added 32BIT-values for energy measuring Release notes WinPQ smart 4

5 WinPQ Smart Version v4.4.2_ Recommended firmware for WinPQ smart is Version (v10447) or newer. Improvements and bug fixes: Display of the online data improved Improvements and expansions in detail Bug fixes and improvements of stability Versionsinformation WinPQ smart 5

6 WinPQ Smart Version v4.4.1_ Recommended firmware for WinPQ smart is Version (v10447) or newer. Improvements and bug fixes: Display of the online data improved Improvements and expansions in detail Bug fixes and improvements of stability Versionsinformation WinPQ smart 6

7 New parameter setup interfaces WinPQ Smart Version v4.4.0_ Versionsinformation WinPQ smart 7

8 WinPQ Smart Version v4.4.0_ Recommended firmware for WinPQ smart is Version (v10447) or newer. News and features: New user friendly and clear interface for parameter setup of the PQI-DA smart devices View- and editable parameter templates with the new parameter setup interface (limited offline parameter setup) Improvements and bug fixes: Enhanced connection stability between software and devices Improvements of the measurement data analysis displays New display language Czech Many further improvements and expansions in detail Bug fixes and improvements of stability Versionsinformation WinPQ smart 8

9 WinPQ Smart Version v4.3.4_ Required Firmware for WinPQ Smart should be Version (v9874) or newer. Improvements and bugfixes: Updated languages (French) Improvement of the stability and performance Many bug fixes Release notes WinPQ smart 9

10 Firmware (v9874) Improvements and Fixes: [IEC 104] reworked the whole communication stack and interface towards the OS [IEC 61850] fixed a typing error in LV + HV Template [TEMPLATE] updated HV wizard template [NVRAM] improved recovery functionality [SCADA] improved protocol an licence handling [USB] fixed some communication issues which caused a connection error Features: [RECORDER] improved overall stability under extreme conditions [CCCI] added improved error handling for rejected worker connections [WIZARD] improved setup for 60 Hz net frequency [MENU] implemented some range checks to prevent a faulty configuration Release notes WinPQ smart 10

11 WinPQ Smart Version v4.3.3_ Required Firmware for WinPQ Smart should be Version (v8425) or newer. Improvements and bugfixes: New and improved vector diagram Updated languages Improvement of the stability and performance Many bug fixes Release notes WinPQ smart 11

12 WinPQ Smart v4.3.2 Required Firmware for WinPQ Smart should be Version (v8425) or newer. Improvements and bugfixes: Oscilloscope-recorder data with zoom-function Improvements and expansions of SCADA modul Updated languages Improvement of the stability and performance Many bug fixes Release notes WinPQ smart 12

13 Firmware (v8425) Fixes: [ETHERNET] improved error handling [IEC 61850] Startup behavior for commissioning, loads template on startup [DISPLAY] fixed some translations [RECORDER] buffer handling fixed which leads to discontinuously records Features: [LANG] added polish and chinese translation files Versionsinformation WinPQ smart 13

14 WinPQ Smart v4.3.0 Required Firmware for WinPQ Smart should be later than Version 1.8 (v7594)! Improvements and Bugfixes: New Feature Online diagnostic to check the status of the device Improvement of the online vector diagram Updated languages Improvement of the stability Release notes WinPQ smart 14

15 Firmware (v7594) Fixes: [COMMON] improved overall stability and reliability [PCAP] fixed number of packet recording limit [TIME] fixed crash when COM-port is doubled assigned by time-sync and something else [TIME] fixed time-conversion bug (reentrancy) [MODBUS] fixed several minor issues and improved the stability [PQAPPL] fixed several configurations lower limits trigger thresholds [PQAPPL] changed default value for "Triggersignal-Haltezeit" [PQAPPL] fixed time-stamping of "fp5max" value(s) [ETHERNET] fixed system crash in broadcast storms [IEC 104] fixed displaying values out-of-date in certain circumstances Release notes WinPQ smart 15

16 Firmware (v7594) Fixes: [IEC 104] the functions for time translation (UTC/local) have been improved for use with summer time (DST) [RECORDER] fixed default configparam of binary-input recording [NTP] corrected configparam "ntp-server-port" max. value to [EVENTREC] corrected configparam "min foldersize" to [EVENTREC] corrected configparam "min filesize" to [EVENTREC] fixed handling of external requested file deletion [CCCI] fixed creation of invalid configuration archives [CCCI] fixed stability on excessive multiple configuration read/write requests (>300) [SWMAN] fixed real-time starting of licensed software-packages (e.g. IEC61850) [LIC] fixed handling of licenses [IPS] corrected configparam "last retransmission tmo [ms]" to 1200 ms [IPS] default value of "Maximum Segment Size (MSS)" set to 1260 allowing flawless packing data into encrypted tunnels Release notes WinPQ smart 16

17 Firmware (v7594) Features: [MODBUS] added multi client support [RECORDER] added a limit for maximum number of files stored per recording-class (512). [COMTRADE] critical data-races are now recognized and resolved (by conversion stop) [IEC 104] Export-import to/from WinPQ Smart added [IEC 104] added SU bit in TS-command response [IEC 104] In IEC104 link layer TS command is not executed. A return time will be w/o SU bit [SCADA] handling of multiple SCADA protocols (only on active at a time) [SCADA] added IEC61850 [LUA] added interface for requesting enhanced device health state [CCCI] It's now possible to tunnel NTP packages (e.g. via WinPQSmart) [DISPLAY] Display is now lockable in two security levels: 1) completely locked 2) any configuration access locked [TELNET] Lua Terminal is now per default shut down Release notes WinPQ smart 17

18 WinPQ Smart v4.2.3 Required Firmware for WinPQ Smart should be later than Version 1.6 (v6333)! Improvements and Bugfixes: IEC61850 Functions added (ICD File Handling: Import / Export functions) Documentation updated Updated languages and added new ones (Polish) Stability Versionsinformation WinPQ smart 18

19 Firmware (v6333) Features und Fixes: IEC61850 v2 implemented (Reporting, Disturbance Records via Comtrade) SCADA Manager added Switching Power Direction via Parameter Telnet and non functional Ports are closed TCP / IP Communication Stack improvements (Portscan fixed, MTU size changed) Status messages added Preperation of Securtiy Featurs and NTP Tunnelling over CCCI Release notes WinPQ smart 19

20 WinPQ Smart v4.2.2 Required Firmware for WinPQ Smart should be later than Version 1.4 (v4077)! Improvements and Bugfixes: Extended communication via USB interface Imroved communication over TCP/IP Improved data export to SD card Release notes WinPQ smart 20

21 Firmware (vxxxx) Required Firmware before Firmware Update: v2385 Improvements and Bugfixes: USB - interface fully activated as communication interface with new driver certification for Windows 10! Fast Relays Output functions added, Trigger mechanism License View inside the Display Selection menus of many Parameters has been added TCP / IP Communication Stack improvements: (ARP-Table, Keep Alive Time, DHCP Refreshing, TTL of TCP / IP Packets) IEC extended parameterization added IEC TK 36 with extended Settings (Scaling possible) IEC Broadcast GI is now answearing Release notes WinPQ smart 21

22 Firmware (vxxxx) Features and Bugfixes: SD Card - Space View has been added SD Card Export function speeded up SD Card Sync improved during Power Off or dip has been improved Modbus TCP Communication Return after Keep Alive time has been improved Modbus RTU / TCP Extension of Parameter: Little Endian / Big Endian now sitchable Syslog - TCP / IP and UDP Network debugging functions has been added (Pcap via LUA -script) NTP Server added (PQI-DA could be an NTP Server with e.g. GPS Clock) Logging Information's extend (IEC104, Modbus Connect / Disconnect) A lot of new Display views has been added (SCADA Manager, Release Notes) Time Synchronization: GPS Antenna ArtNr now fully supported Time Synchronization: Statusview inside the Display Comtrade Export of disturbance records added (IEC61850 Preparaiton) Languages / Translations improved Release notes WinPQ smart 22

23 Firmware (vxxxx) Features and Bugfixes: Maximum indicator function changed to 10 Min RMS values Firmware Update Process improved and stabilized Preparation for IEC61850 interface Release notes WinPQ smart 23

24 WinPQ Smart v4.2 Required Firmware for WinPQ Smart should be later than Version 1.4 (v4077)! Features and Bugfixes: USB Interface is now fully supported. The driver are automatically installed and also the root certificates are installed automatically during the Installation Process on the PC. Certification of the USB Driver by company Globalsign Selection menus of many Parameters has been added Revised texts and clear layout of the parameter surfaces Added validation when loading parameter templates EN reworked templates Graphical overwork and improvements in the EN Reports Improved graphics engine in the software implemented to solve the problem on PCs with dual graphics card. Preparation for IEC Interface Improve the stability of the online data stream from the software Release notes WinPQ smart 24

25 Firmware (v3093) Required Firmware before Firmware Update: v2385 Bugfixes: Binary Recording fixed Commissioning Wizard fixed Release notes WinPQ smart 25

26 Improvements & Bugfixes v4.1 Parameterisation of Binary Inputs fixed Release notes WinPQ smart 26

27 Firmware 1.2 (v2999) Required Firmware before Firmware Update: v2385 News: License Manager is now included and has been activated IEC SCADA protocol has been implemented Recording control via binary inputs Triggering via the binary inputs Recording of Binary Inputs Automatic guided commissioning via the display, with stored standard templates for low, medium and high voltage grids SD card: speed and handling improved Firmware update via SD card from Rev possible Implemented high accuracy GPS time synchronization with Article electronic trailing indicator (Current: TRMS) Release notes WinPQ smart 27

28 Improvements & Bugfixes v4.1 Parameters of the PQI-DA smarts are now exportable (Excel) and printable The parameters are compared in the parameter screen during loading and the differences are shown in a mask. There you can now select each parameter which you want to take into your Parameter set Release notes WinPQ smart 28

29 Improvements & Bugfixes v4.1 Selection of data folder: In the WinPQ smart options you have from version 4.1 the possibility to set the path for the backup of the downloaded data (archive data) to a customer-specific path Exporting / importing archive data: in the archives there is a possibility to export selected archive data now. With "Import files, Files can now be imported from the SD card into the software Progress bar has been improved for the download and import data from different sources Release notes WinPQ smart 29

30 Contact A.Eberle GmbH & Co.KG PowerQuality Frankenstraße 160; Nürnberg +49 (0)