70-669_. Number: Passing Score: 800 Time Limit: 120 min File Version: 1.0. Microsoft

Transcription

1 70-669_ Number: Passing Score: 800 Time Limit: 120 min File Version: Microsoft <img src=" _1.jpg" width="675" height="225"> TS: Windows Server 2008 R2, Desktop Virtualization Version: 17.0 Microsoft Exam

2 Exam A QUESTION 1 All Client computers in your company run Windows 7 Enterprise. Users run Windows XP Mode guest virtual machines (VMs) on their computers. Each client computer runs two guest VMs. Each guest VM requires network connectivity to the other guest VM on the host computer, but most not have network connecticity to the host computer operating system or to the internet You need to configure each guest VM to meet the requirements. What should you do? A. Set each VM network adapter to Not connected. B. Configure each VM to use one Internal Network network adapter. C. Configure each VM to use one Shared Networking (NAT) network adapter. D. Disable Integration Features for each VM. Configure Windows Firewall to allow incoming ICMP traffic, and remove all other Windows Firewall exceptions Correct Answer: B /Reference: : - Shared Networking (NAT) refers to a virtual NAT (Network Address Translation) which allows the VM to leverage the external TCP/IP network connected to the host. This is very useful if you regularly move the host computer between different network configurations. NAT is the preferred networking option when there is a shortage of IP addresses, a need to ensure the VM's IP address is not targetable from an external network, or a need for connecting using WWAN. - In contrast, Bridge mode uses the network adapter on the host. This option appears in the drop down menu as the name of the adapter. The VM is connected directly to the selected network connection of the Windows 7 host, and will behave like a separate physical computer on the same network. If the host has a wireless adapter, its name will appear in the dropdown list. In Bridge mode, Virtual Machine Network Services driver helps redirect the incoming network traffic to the correct VM and associate the correct MAC address in all outbound network traffic. In scenarios using VPN, Bridge mode is the preferred option. - Choosing the option `Not connected' disables the VM's networking ability and completely isolates it from the network. - `Internal Network' option enables networking among only the VMs on the single Windows 7 host. mode.aspx "A Composite Solution With Just One Click" - Certification Guaranteed 2 Microsoft Exam QUESTION 2 Your company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7. You are deploying Microsoft Enterprise Desktop Virtualization (MED-V) virtual machines (VMs) on several client computers. You need to ensure that names of the new VMs follow a naming convention. What should you do? A. In the MED-V Management console, configure the Image Update Settings.

3 B. In the MED-V Management console, add a script action and set the VM computer name pattern. C. In the VM, configure the Identification String option by using the Setup Manager Wizard. D. In the VM, run the System Preparation Tool (Sysprep) and choose to start the factory session after rebooting. Correct Answer: B /Reference: : QUESTION 3 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization requirements. You need to ensure that all MED-V virtual machine (VM) images can be centrally stored and are available to all client computers. What should you do? A. Install and configure IIS on a member server. B. Configure a shared folder on a member server. C. Create a visible workspace for client computers. D. Install and configure Microsoft SQL Server on a member server. Correct Answer: A /Reference: "A Composite Solution With Just One Click" - Certification Guaranteed 3 Microsoft Exam : An image repository is an optional server that is used for image distribution (where administrators upload new images and client computers check the server every 15 minutes and update their image if a new one is available). An image distribution server requires the following: Internet Information Services (IIS) During the IIS installation, when adding role services, select the following supported authentication methods: When configuring IIS, include the following: -.ckm (application/octet-stream) -.index (application/octet-stream) QUESTION 4 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. Your environment includes Microsoft Enterprise Desktop Virtualization (MED-V). You update the MED-V Workspace virtual machines (VMs) several times and notice that the server is running out of disk space.

4 You need to configure the Workspace to minimize the disk space requirements. What should you do? A. Configure the Workspace as revertible. B. Set an expiration date for the Workspace. C. Specify the number of image versions to keep. D. Specify that clients should use the Trim Transfer when downloading the images. Correct Answer: D /Reference: : "A Composite Solution With Just One Click" - Certification Guaranteed 4 Microsoft Exam <img src=" _2.jpg" width="600" height="247"> QUESTION 5 Your organization has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7. You need to create a single distribution file containing Windows Virtual PC and a virtual machine image that will be deployed to all the client computers. What should you use? A. Microsoft Deployment Toolkit (MDT) 2010 B. Deployment Images Servicing and Management (DISM) C. Microsoft Enterprise Desktop Virtualization (MED-V) Packaging Wizard D. Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 with a template Correct Answer: C /Reference: : QUESTION 6 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. Your environment includes Microsoft Enterprise Desktop Virtualization (MED-V). You are preparing to update a MED-V Workspace that is used by 1000 client computers.

5 "A Composite Solution With Just One Click" - Certification Guaranteed 5 Microsoft Exam You need to minimize the network impact of updating the workspace. What are the two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Pack the Workspace images. B. Enable Trim Transfer on the Workspace. C. Send each virtual machine file storage folder to a compressed (zipped) folder. D. On each virtual machine file in the Workspace, enable file system compression. Correct Answer: AB /Reference: : QUESTION 7 All client computers in your company run Windows 7 Enterprise. You are planning to deploy a custom application that runs only on Windows XP to all users. You install Windows XP Mode on each host computers and install the application in the Windows XP guest virtual machines (VMs). You verify that the application runs in the guest VMs. An application shortcut does not appear on the Windows 7 host computers. You need to ensure that the applications can be launched directly from Windows 7 host computers. What should you do in the guest VMs? A. Repair the application. B. Upgrade the Virtual PC Integration Components. C. Copy the application shortcut to the Start menu to All Users. D. Assign the Full Control permission to the application shortcut to the everyone group. Correct Answer: C /Reference: : windowsvirtualpc.aspx "A Composite Solution With Just One Click" - Certification Guaranteed 6 Microsoft Exam QUESTION 8 Your organization has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7. You use Microsoft System Center Virtual Machine Manager (VMM) 2008 R2 to manage your Hyper-V hosts. Your environment includes Microsoft Enterprise Desktop Virtualizaetion (MED-V). You plan to deploy a virtual machine (VM) image to all client computers.

6 You need to ensure that user state information is maintained between sessions in the VM. What should you do? A. Use VMM to configure placement settings. B. Configure MED-V revertible workspace policy. C. Configure MED-V persistent workspace policy. D. Use Hyper-V Manager to create a revert snapshot. Correct Answer: C /Reference: : The following MED-V workspace types are available: Persistent--In a persistent MED-V workspace, all changes and additions the user makes to the MED-V workspace are saved in the MED-V workspace between sessions. Additionally, a persistent MED-V workspace is generally used in a domain environment. Revertible--In a revertible MED-V workspace, at the completion of each session (that is, when the MED-V workspace is stopped), the MED-V workspace reverts to its original state during deployment. No changes or additions that the user made are saved on the MED-V workspace between sessions. A revertible MED-V workspace cannot be used in a domain environment. technet.microsoft.com/en-us/library/ff aspx QUESTION 9 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You use Microsoft Enterprise Desktop Virtualization (MED-V). You need to prepare the MED-V server for cluster mode. "A Composite Solution With Just One Click" - Certification Guaranteed 7 Microsoft Exam What should you do? A. Copy the Configuration Server folder to a network share. B. Add the Failover Clustering feature to the MED-V server. C. Add the Network Load Balancing (NLB) feature to the MED-V server. D. Migrate the MED-V server to a highly available virtual machine (HAVM). Correct Answer: A /Reference: : To configure the MED-V server in cluster mode 1. Install and configure MED-V on one of the servers. 2. Create a shared network in a central location where all of the servers can access it. 3. Copy the contents of the <InstallDir>/Servers/ConfigurationServer folder to the shared network. 4. Install MED-V server on all designated servers. 5. On the shared network, assign full access to all MED-V server system accounts. 6. On each server, do the following: a. In the <InstallDir>/Servers/ServerConfiguration.xml file, set the value of <StorePath> to the shared network path. b. Copy the <InstsallDir>/Servers/KeyPair.xml file from the original server to all MED-V servers. c. Restart the MED-V service.

7 QUESTION 10 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. Your environment includes Microsoft Enterprise Desktop Virtualization (MED-V). You use MED-V to support temporary test environments. You need to ensure that the disk space used by obsolete Workspaces is automatically minimized. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two) A. Configure the Workspace as revertible. B. Set an expiration date for the Workspace. C. Specify the number of image versions to keep. D. Configure automatic deletion of the Workspace "A Composite Solution With Just One Click" - Certification Guaranteed 8 Microsoft Exam Correct Answer: BD /Reference: : Workspace Expiration Options Using the MED-V Management Console, Workspace expiration options are set in the General section of the deployment tab. Expiration options can be set on a per-user or per-group basis. When the workspace expiration date is set, it takes effect for the workspace during the next policy refresh (which is on login, every 15 minutes, or manually through the system tray). If a workspace is active, and the workspace expiration occurs, it will not affect an active workspace session. But once the workspace stops in that case, the workspace will no longer be made available to the user. Workspace Deletion Options An additional option is made available for determining the behavior of workspace images on the client under certain configuration parameters. These include when the workspace is expired, when the workspace is offline for a certain amount of time, or the workspace has been disabled. These options were primarily designed for revertible workspaces in that deletion of persistent workspaces are often only used for added security of normally connected workspaces. If a parameter triggering workspace deletion has occurred and the workspace is currently running, the deletion will take place once the workspace is stopped. It is important to note only the images (all versions) beneath C: \MED-V Images\<IMAGENAME> will be deleted and not pre-staged CKM images. The Behavior Note that it is important that you understand the behavior from a user's standpoint. If the user is attempting to start a MED-V Workspace, he may receive a message stating that there are no workspaces available, or he may see a list of workspaces but the one the user is looking for is not available. This usually means one of the following: The workspace has not been enabled for the user The workspace is enabled but has expired Users will receive no warning prior to expiration. In addition, users will not receive any notice once the workspace has expired. Tip by J.C. Hornbeck, a System Center Knowledge Engineer at Microsoft. Among other duties, J.C. Hornbeck manages a variety of TechNet blogs, including The Microsoft Enterprise Desktop Virtualization (MED-V) Blog. Check it out for more information on Microsoft Application Virtualization. magazine/gg aspx QUESTION 11 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You manage client computers by

8 "A Composite Solution With Just One Click" - Certification Guaranteed 9 Microsoft Exam using Microsoft System Center Configuration Manager 2007 R2. You are deploying Microsoft Enterprise Desktop Virtualization (MED-V) to support client virtualization requirements. You need to ensure that administrators can centrally store MED-V logging information and generate reports. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Install and configure IIS on a member server. B. Configure a shared folder on a member server. C. Install and configure Microsoft SQL server 2008 on a member server. D. Configure Microsoft Asset Inventory Service on the Configuration Manager server. Correct Answer: AC /Reference: : QUESTION 12 All client computers in your company run Windows 7. Windows Virtual PC is installed on all client computers. You create and configure a virtual machine (VM) named Guest1. You need to use the Guest1 virtual hard disk (VHD) as a base for additional VMs that will run on the same host computer, and minimize the disk space required for each new VM. Which type of VHD should you create for the new VMs? A. fixed size B. differencing C. dynamically expanding D. linked to a physical hard disk Correct Answer: B /Reference: : "A Composite Solution With Just One Click" - Certification Guaranteed 10 Microsoft Exam <img src=" _3.jpg" width="600" height="310"> QUESTION 13 Your company has an Active Directory Domain Services (AD DS) domain that runs at the Windows Server 2008 R2 functional level. All servers run Windows Server 2008 R2. All client computers run Windows XP Professional. You use the Key Management Service (KMS) to manage your volume license activations. All servers have been activated by using KMS. You deploy 20 Windows 7 virtual desktops. The virtual desktop operating systems do not activate.

9 You need to ensure that the virtual desktops activate by using KMS. What should you do? A. Deploy five more virtual desktops. B. Run slmgr.vbs with the -ato parameter. C. Use the Volume Activation Management Tool (VAMT). D. Raise the domain functions level to Windows Server 2008 R2. Correct Answer: A /Reference: : KMS Activation Thresholds "A Composite Solution With Just One Click" - Certification Guaranteed 11 Microsoft Exam KMS can activate both physical computers and virtual machines. To qualify for KMS activation, a network must meet the activation threshold: KMS hosts activate client computers only after meeting this threshold. To ensure that the activation threshold is met, a KMS host counts the number of computers that are requesting activation on the network. For computers running Windows Server 2008 or Windows Server 2008 R2, the activation threshold is five. For computers running Windows Vista or Windows 7, the activation threshold is 25. The thresholds include client computers and servers that are running on physical computers or virtual machines. A KMS host responds to each valid activation request from a KMS client with the count of how many computers have contacted the KMS host for activation. Clients that receive a count below their activation threshold are not activated. For example, if the first two computers that contact the KMS host are running Windows 7, the first receives an activation count of 1, and the second receives an activation count of 2. If the next computer is a Windows 7 virtual machine, it receives an activation count of 3, and so on. None of these computers is activated, because computers running Windows 7 must receive an activation count 25 to be activated. KMS clients in the grace state that are not activated because the activation count is too low connect to the KMS host every two hours to get the current activation count and will be activated when the threshold is met. technet.microsoft.com/en-us/library/ff aspx QUESTION 14 Your company has Active Directory Domain Services (AD DS) domain. You install the Remote Desktop Session Host (RD Session Host) role service on a server that runs Windows Server 2008 R2. Client computers run Windows Vista and Windows 7. You need to automate the migration of user settings from client computers to the RD Session Host Server. Which tool should you use? A. Windows Easy Transfer B. User State Migration Tool (USMT) C. Windows System Image Manager (Windows SIM) D. Deployment Image Servicing and Mangaement (DISM) Correct Answer: B /Reference: : - Microsoft Windows User State Migration Tool (USMT) migrates user files and settings during deployments of Microsoft Windows XP and Windows Vista. You can use USMT to perform unattended migrations and to migrate files and settings for computers with multiple users. Also, with USMT you have the ability to encrypt and compress the store. USMT is intended for administrators who are performing automated deployments.

10 "A Composite Solution With Just One Click" - Certification Guaranteed 12 Microsoft Exam - The Deployment Image Servicing and Management (DISM) tool replaces the pkgmgr, PEImg, and IntlConfg tools that are being retired in Windows 7. DISM provides a single centralized tool for performing all of the functions of these three tools in a more efficient and standardized way, eliminating the source of many of the frustrations experienced by current users of these tools. - Windows System Image Manager (Windows SIM) is the tool used to create unattended Windows Setup answer files. You can create an answer file by using information from a Windows image (.wim) file and a catalog (.clg) file. Component settings are added to an appropriate configuration pass in the answer file. You can also add packages to be installed during Windows Setup. The following topics describe conceptual information about Windows SIM. QUESTION 15 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You use a virtual desktop infrastructure (VDI) environment to provide access to applications. All virtual desktop computer objects are located in an organizational unit (OU) named VirtualDesktops. All client computer objects are located in an OU named Desktops. You need to ensure that all existing users receive the same desktop shortcuts, and that they are not able to modify the shortcuts from virtual desktops. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Create a mandatory user profile. B. Create a new default user profile. C. Create a Group Policy object (GPO) that configures the user profile. Link the GPO to the Desktops OU. D. Create a Group Policy object (GPO) that configures the user profile. Link the GPO to the VirtualDesktops OU. Correct Answer: AD /Reference: : A mandatory user profile is a special type of pre-configured roaming user profile that administrators can use to specify settings for users. With mandatory user profiles, a user can modify his or her desktop, but the changes are not saved when the user logs off. The next time the user logs on, the mandatory user profile created by the administrator is downloaded. There are "A Composite Solution With Just One Click" - Certification Guaranteed 13 Microsoft Exam two types of mandatory profiles: normal mandatory profiles and supermandatory profiles. User profiles become mandatory profiles when the administrator renames the NTuser.dat file (the registry hive) on the server to NTuser.man. The.man extension causes the user profile to be a read-only profile. User profiles become super-mandatory when the folder name of the profile path ends in.man; for example, \ \server\share\mandatoryprofile.man\. Super-mandatory user profiles are similar to normal mandatory profiles, with the exception that users who have super-mandatory profiles cannot log on when the server that stores the mandatory profile is unavailable. Users with normal mandatory profiles can log on with the locally cached copy of the mandatory profile. Only system administrators can make changes to mandatory user profiles. library/windows/desktop/bb776895(v=vs.85).aspx To create a roaming user profile

11 1. Open Active Directory Users and Computers. 2. Click the domain and the OU where the user account resides. 3. Right-click the user account for which to set a roaming profile, and then click Properties. 4. Click the Profile tab, and then type the profile path information in Profile path. (Use the full path in each user account. For example, type \\Server\ShareName\UserName.) To create a roaming user profile for a user that has a local profile Open Active Directory Users and Computers. 1. Click the domain and the OU where the user account resides. 2. Right-click the appropriate user account for which to set a roaming profile, and then click Properties. 3. Click the Profile tab, and type the profile path information in Profile path (for example, type \\Server \ShareName\UserName). Additional Policy Settings That Are Related to User Profiles Prevent roaming profile changes from propagating to the server This policy determines if the changes a user makes to their roaming profile are merged with the server copy of their profile. If this policy is set, at logon users receive their roaming profile, but any changes users make to their profile are not merged to the users' roaming profile at logoff. Then create a dummy account as described earlier, log on to a desktop machine using this account, preconfigure the desktop, and log off. Log on to the desktop as Administrator and open the User Profiles dialog box as before, using System in Control Panel. Select the local profile for your template account and click on Copy To as before. But this time, in the Copy To box above, type \\<dcname>\netlogon\default User, where <dcname> is the name of your domain controller. Then click on Change and specify Everyone so that any user can use this new profile. Now when you click on OK, your "A Composite Solution With Just One Click" - Certification Guaranteed 14 Microsoft Exam preconfigured profile is copied to the NETLOGON share on your domain controller as a folder named Default User. When a user logs on to the network for the first time, her machine will access this share and use this preconfigured profile as the basis for creating her roaming profile, which is saved in \\<servername> \<sharename> as before. QUESTION 16 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You have a Remote Desktop Session Host (RD Session Host) server and a Remote Desktop Gateway (RD Gateway) server. You change the configuration of Windows Firewall by using Group Policy. Users on the corporate network are then unable to connect to their virtual desktops. You need to ensure that users can connect to their virtual desktops. What should you do? (Each correct answer presents part of the solutions. Choose two.) A. Create a Windows Firewall inbound rule for port 443 on the RD Gateway server. B. Create a Windows Firewall inbound rule for port 443 on the RD Session Host server. C. Create a Windows Firewall inbound rule for port 3389 on the RD Gateway server. D. Create a Windows Firewall inbound rule for port 3389 on the RD Session Host server. Correct Answer: AD /Reference: : An RD Gateway server uses port 443, which transmits data through a Secure Sockets Layer (SSL) tunnel. QUESTION 17 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server

12 2008 R2. You provide access to some applications through a virtual desktop infrastructure (VDI) environment. All Remote Desktop Session Host (RD Session Host) server objects are located in an "A Composite Solution With Just One Click" - Certification Guaranteed 15 Microsoft Exam organizational unit (OU) named RDServers. All virtual desktop computers are located in an organizational unit (OU) named VirtualDesktops. All other client computer objects are located in an OU named Desktops. The system drive in each RD Session Host server is running out of free disk space. You need to restrict the amount of disk space used by the roaming user profile cache. What should you do? A. Create a Group Policy object (GPO) that enables folder redirection for all users. Link the GPO to the RDServers OU. B. Create a Group Policy object (GPO) that enables folder redirection for all users. Link the GPO to the VirtualDesktops OU. C. Create a Group Policy object (GPO) that configures the Limit the size of the entire roaming user profile cache setting. Link the GPO to the RDServers OU. D. Create a Group Policy object (GPO) that configures the Limit the size of the entire roaming user profile cache setting. Link the GPO to the VirtualDesktops OU Correct Answer: C /Reference: : Roaming user profile cache management A new Group Policy setting is available for Remote Desktop Services in Windows Server 2008 R2 that limits the size of the overall profile cache. If the size of the profile cache exceeds the configured size, Remote Desktop Services deletes the least recently used profiles until the overall cache goes below the quota. You can configure the maximum size of the roaming user profile cache on an RD Session Host server by applying the Limit the size of the entire roaming user profile cache Group Policy setting. The Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services \Remote Desktop Session Host\Profiles. If you enable this policy setting, you must specify a monitoring interval (in minutes) and a maximum size (in gigabytes) for the entire roaming user profile cache. The monitoring interval determines how often the size of the roaming user profile cache is checked. QUESTION 18 Your company has an Active Directory Domain Services (AD DS) domain. You install the Remote Desktop Session Host (RD Session Host) role service on a server that runs Windows Server 2008 R2. All RD Session Host servers are located in an Organizational Unit (OU) named "A Composite Solution With Just One Click" - Certification Guaranteed 16 Microsoft Exam RDSessionHosts. All user accounts are located in an OU named Employees. Users connect to multiple RD Session Host servers by using the Remote Desktop Connection client on their Windows 7 client computers. You need to ensure that users can access the files stored in their own Documents folders regardless of the RD Session Host server to which they are connected What should you do? A. Create a mandatory profile on each client computer.

13 B. Create a mandatory profile on each RD Session Host server. C. Create a Group Policy object (GPO) that redirects the Documents folder, and link the GPO to the employees OU. D. Create a Group Policy object (GPO) that redirects the Documents folder, and link the GPO to the RDSessionHosts OU Correct Answer: C /Reference: : Folder Redirection User settings and user files are typically stored in the local user profile, under the Users folder. The files in local user profiles can be accessed only from the current computer, which makes it difficult for users who use more than one computer to work with their data and synchronize settings between multiple computers. Two technologies exist to address this problem: Roaming Profiles and Folder Redirection. Both technologies have their advantages, and they can be used separately or together to create a seamless user experience from one computer to another. They also provide additional options for administrators managing user data. Folder Redirection lets administrators redirect the path of a folder to a new location. The location can be a folder on the local computer or a directory on a network file share. Users can work with documents on a server as if the documents were based on a local drive. The documents in the folder are available to the user from any computer on the network. Folder Redirection is located under Windows Settings in the console tree when you edit domain-based Group Policy by using the Group Policy Management Console (GPMC). The path is [Group Policy Object Name]\User Configuration\Policies\Windows Settings\Folder Redirection. technet.microsoft.com/en-us/library/cc aspx QUESTION 19 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You are deploying Remote Desktop Services (RDS). You install a Remote Desktop Session Host "A Composite Solution With Just One Click" - Certification Guaranteed 17 Microsoft Exam (RD Session Host) server in the environment. You need to install Remote Desktop Services client access licenses (RDS CALs). What should you do first? A. Run the Install Licenses Wizard. B. Run the Manage RDS CALs Wizard. C. Add the Remote Desktop Licensing role service. D. Add the RD Session Host server to a new group in the Remote Desktop Connection Manager console. Correct Answer: C /Reference: : To use Remote Desktop Services, you must also have at least one license server deployed in your environment. For small deployments, you can install both the RD Session Host role service and the RD Licensing role service on the same computer. For larger deployments, it is recommended that the RD Licensing role service be installed on a separate computer from the RD Session Host role service. technet.microsoft.com/en-us/library/dd983943(ws.10).aspx QUESTION 20

14 Your company has an Active Directory Domain Services (AD DS) domain. You have multiple Remote Desktop Session Host (RD Session Host) servers. You have 100 Windows Server 2008 R2 Remote Desktop Services client access licenses (RDS CALs) installed on your license server. You need to return 10 RDS CALs to the pool on the license server. What should you do? A. Remove the Per User RDS CALs. B. Revoke the Per Device RDS CALs. C. Remove the Per Device RDS CALs. D. Repeat the installation of the RDS CALs. Correct Answer: B /Reference: : A permanent RDS Per Device CAL issued by a license server is configured to automatically expire after a random period between 52 and 89 days, at which time the RDS Per Device CAL returns to the pool of available RDS Per Device CALs on the license server. "A Composite Solution With Just One Click" - Certification Guaranteed 18 Microsoft Exam In some circumstances, you might want or need to return an RDS Per Device CAL that has been issued back to the available pool on the license server before the automatic expiration period has been reached. For example, you might want to do this if the client computer or device is no longer a part of your environment. You can revoke an RDS Per Device CAL by using the Remote Desktop Licensing Manager tool. Important You can only revoke an RDS Per Device CAL. You cannot revoke an RDS Per User CAL. technet.microsoft.com/en-us/library/cc aspx QUESTION 21 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You provide access to some applications that run on Windows 7 through a virtual desktop infrastructure (VDI) environment. You add a new Windows 7 virtual desktop image to the same server as an existing Windows 7 virtual desktop image. You need to ensure that all application settings are copied from the original virtual desktop image to the new virtual desktop image. What should you do? A. On the original virtual desktop, run the ScanState tool with the /offlinewinold option. From a command prompt on the new virtual desktop, run the LoadState tool with the /hardlink option. B. From the new virtual desktop, run Windows Easy Transfer and use the network option. C. From the original virtual desktop, run Windows Easy Transfer and use the Easy Transfer cable option. D. On the new virtual desktop, run the ScanState tool with the /hardlink option, and then run the LoadState tool with the /offlinewinold option. Correct Answer: B

15 /Reference: : QUESTION 22 Your company has an Active Directory Domain Services (AD DS) domain. All servers run "A Composite Solution With Just One Click" - Certification Guaranteed 19 Microsoft Exam Windows Server 2008 R2. You activate the Key Management Service (KMS) on a server to handle volume activation for your Windows 7 client computers. Windows 7 client computers are not being activated. The KMS licencing status is shown as Licensed. The Windows Event Log does not contain any corresponding activationrelated events. You need to ensure that the KMS server can activate Windows 7 client computers. What should you do? A. Run the slmgr.vbs /dlv command. B. Run the slmgr.vbs /ato command. C. Add a DNS SOA record pointing to the KMS server. D. Add a DNS SRV record pointing to the KMS server. Correct Answer: D /Reference: : QUESTION 23 Your company runs Remote Desktop Services. You have a Remote Desktop Session Host (RD Session Host) server. You need to select a digital certificate for signing Remote Desktop Protocol (.rdp) files. Which two certificate types can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.) A. Code signing B. Authenticated Session C. Workstation Authentication D. Remote Desktop Protocol (RDP) Signing Correct Answer: AD /Reference: : You can sign.rdp files that are used for RemoteApp connections by using a Server Authentication certificate [Secure Sockets Layer (SSL) certificate], a Code Signing certificate, or a specially defined Remote Desktop Protocol (RDP) Signing certificate. "A Composite Solution With Just One Click" - Certification Guaranteed 20 Microsoft Exam QUESTION 24 Your company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7.

16 You have a Remote Desktop Session Host (RD Session Host) server. You need to ensure that computer identities are validated before user authentication is performed. What should you do? A. Configure the Set TS Gateway authentication method Group Policy setting to Use smart card. B. Configure the Set TS Gateway authentication method Group Policy setting to Use locally logged-on credentials. C. Enable the Configure server authentication for client Group Policy setting and then select Do not connect if authentication fails. D. Enable the Configure server authentication for client Group Policy setting and then select Always connect, even if authentication fails. Correct Answer: C /Reference: : QUESTION 25 Your company runs Remote Desktop Services. You have a Remote Desktop Session Host (RD Session Host) server. You need to ensure that remote desktop users can print only to the printers that are installed on the RD Session Host server. What should you do? A. Enable the Do not allow client printer redirection Group Policy setting. B. Disable the Do not allow client printer redirection Group Policy setting. C. Enable the Do not set default client printer to be default printer in a session Group Policy setting. D. Disable the Do not set default client printer to be default printer in a session Group Policy setting. "A Composite Solution With Just One Click" - Certification Guaranteed 21 Microsoft Exam Correct Answer: A /Reference: : Do not allow client printer redirection This policy setting allows you to specify whether to prevent the mapping of client printers in Terminal Services sessions. You can use this policy setting to prevent users from redirecting print jobs from the remote computer to a printer attached to their local (client) computer. By default, Terminal Services allows this client printer mapping. If you enable this policy setting, users cannot redirect print jobs from the remote computer to a local client printer in Terminal Services sessions. If you disable this policy setting, users can redirect print jobs with client printer mapping. If you do not configure this policy setting, client printer mapping is not specified at the Group Policy level. However, an administrator can still disable client printer mapping by using the Terminal Services Configuration tool. QUESTION 26

17 Your company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7. You have a Remote Desktop Session Host (RD Session Host) server. You need to ensure that each user is authenticated to the RD Session Host server before a session is created. What should you do? A. Set the security layer option to SSL (TLS 1.0). B. Set the encryption level option to FIPS Compliant. C. Set the log on option to Always prompt for password. D. Set the security option to Allow connections only from computers running Remote Desktop with Network Level Authentication. Correct Answer: D /Reference: : "A Composite Solution With Just One Click" - Certification Guaranteed 22 Microsoft Exam <img src=" _4.jpg" width="600" height="666"> QUESTION 27 Your company's main office and a branch office are connected by a slow WAN link. All servers run Windows Server 2008 R2. All client computers run Windows 7. You install an application on a Remote Desktop Session Host (RD Session Host) server. Users in the branch office experience slow performance when accessing the application through Remote Desktop. You need to minimize the bandwidth utilization to the RD Session Host server. "A Composite Solution With Just One Click" - Certification Guaranteed 23 Microsoft Exam What should you do? A. Configure BranchCache in Hosted Cached mode. B. On the RD Session Host server, configrue the RDP-TCP properties to allow only Network Level Authentication. C. On each client computer,set the display cplors in the Remote Desktop Connection client to High Color (15 bit). D. On each client computer, configure the Connect From Anywhere settings in the Remote Desktop Connection client. Correct Answer: C /Reference: : <img src=" _5.jpg" width="600" height="686"> "A Composite Solution With Just One Click" - Certification Guaranteed 24 Microsoft Exam QUESTION 28 Your company runs Remote Desktop Services. You have a Remote Desktop Session Host (RD Session Host) server.

18 You enable Microsoft Word as a RemoteApp application on the RD Session Host server. You need to ensure that the RemoteApp application opens when a user double-clicks a Word (.docx) file on a client computer. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.) A. Create a Windows Installer (.msi) file. B. Create a Remote Desktop Protocol (.rdp) file. C. In the properties of the RemoteApp application, enable the Allow any command-line arguments setting. D. Enable the Associate client extensions for this program with the RemoteApp program setting for the file. Correct Answer: AD /Reference: : At this point you should see the program you chose to deploy as a RemoteApp in the RemoteApp Programs list at the bottom of the RemoteApp Manager. The next step is to create an.rdp or.msi file to run the RemoteApp on your client. The.rdp file will be able to open your RemoteApp when users double-click on it, but it will not associate a file extension with the RemoteApp. To make the file association you need to create an.msi file for your RemoteApp. When you run the.msi file on a compatible client it will setup the file association and create icons (which you can configure). Configure-Microsofts- RemoteApp-for-Terminal-Services.htm Creating a Windows Installer Package from a RemoteApp Program To view what file name extensions are associated with a program on the terminal server, click Start, click Control Panel, and then double-click Default Programs. Click Associate a file type or protocol with a program to view the file name extensions and their default associated program. QUESTION 29 "A Composite Solution With Just One Click" - Certification Guaranteed 25 Microsoft Exam Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You have a Remote Desktop Session Host (RD Session Host) server and a Remote Desktop Web Access (RD Web Access) server. You enable several RemoteApp applications in the RD Session Host server. You need to configure access to RemoteApp applications so that RD Web Access users see only applications to which they have been granted access. What should you do? A. Set NTFS permissions on the installation folder for each RremoteApp application. B. Assign domain users and domain security groups to each RemoteApp application. C. Add domain users and domain security groups to the TS Web Access Computers security group on the RD Session Host Server. D. Specify custom menu locations on the RD Session Host server for each domain security group by using a Group Policy object (GPO). Correct Answer: B /Reference: :

19 You can specify which domain users and domain groups can see the icon for a RemoteApp program when the RemoteApp program is made available through RD Web Access. By default, all authenticated domain users will be able to see the icon for a RemoteApp program on the Web site provided by RD Web Access. QUESTION 30 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. The Remote Desktop Services (RDS) environment includes a Remote Dekstop Session Host (RD Session Host) server in the LAN environment, and a Remote Desktop Gateway (RD Gateway) server in the perimeter network (also known as DMZ). You deploy a Remote Desktop Web Access (RD Web Access) server in the perimeter network. You publish a RemoteApp application. The RemoteApp application is not visible to users when they log in to RD Web Access. You need to ensure that authorized users can run RemoteApp applications from RD Web Access. What would you do? "A Composite Solution With Just One Click" - Certification Guaranteed 26 Microsoft Exam A. Restart the World Wide Web Publishing Service on the RD Web Access server. B. Disable Forms Authentication on the Default Web Site on the RD Web Access server. C. Allow Windows Management Instrumentation (WMI) communication between the RD Gateway server and the RD Session Host server. D. Allow Windows Management Instrumentation (WMI) communication between the RD Web Access server and the RD Session Host server. Correct Answer: D /Reference: : Configure the TS Web Access server to allow access from the Internet To allow users to access the TS Web Access server from the Internet, the recommended configuration is to place both the TS Gateway server and the TS Web Access server in the perimeter network, with the terminal servers that host RemoteApp programs behind the internal firewall. Alternatively, you can deploy TS Web Access on the internal network, and then make the Web site available through Microsoft Internet Security and Acceleration (ISA) Server. If you deploy TS Web Access in the perimeter network, you must configure your firewall to allow Windows Management Instrumentation (WMI) traffic from the TS Web Access server to the terminal server. QUESTION 31 Your company runs Remote Desktop Services. All client computers run Windows Vista SP2. You have a Remote Desktop Session Host (RD Session Host) server. You need to deploy a RemoteApp application to client computers and ensure that the application appears on the Start menu. Which file type should you distribute to the client computers? A. Windows Installer (.msi) B. Client Configuration File (.wcx) C. Remote Desktop Protocol (.rdp) D. RemoteApp Programs list and settings (.tspub) Correct Answer: A

20 /Reference: : Users can run RemoteApp programs in a number of ways. They can: - Double-click a Remote Desktop Protocol (.rdp) file that has been created and distributed by their administrator. "A Composite Solution With Just One Click" - Certification Guaranteed 27 Microsoft Exam - Double-click a program icon on their desktop or Start menu that has been created and distributed by their administrator with a Windows Installer (.msi) package. - Double-click a file whose extension is associated with a RemoteApp program. (This can be configured by their administrator with a Windows Installer package.) - Access a link to the RemoteApp program on a Web site by using TS Web Access. technet.microsoft.com/en-us/library/cc753844(ws.10).aspx QUESTION 32 Your company has an Active Directory Domain Services (AD DS) domain. You install the Remote Desktop Session Host (RD Session Host) role service and the Microsoft Application Virtualization (App-V) 4.6 client on a server that runs Windows Server 2008 R2. You publish applications to the RD Session Host server by using App-V. Partner companies require access to an internal application. You provide each partner company with a preconfigured Remote Desktop Protocol (.rdp) file that enables the company to access the application by using the Connect From Anywhere feature. You need to specify the protocol that each partner company must allow through its firewall to establish the connection. Which protocol should you specify? A. RDP B. HTTPS C. RTSP D. RTSPS Correct Answer: B /Reference: : QUESTION 33 Your company has an Active Directory Domain Services (AD DS) domain. All client computers run Windows 7. You have a Remote Desktop Session Host (RD Session Host) server. "A Composite Solution With Just One Click" - Certification Guaranteed 28 Microsoft Exam You have the following requirements: - Local devices from remote desktop clients must be redirected to the RD Session Host server. - USB devices from remote desktop clients must not be redirected to the RD Session Host server. What should you do?

21 A. Disable drive redirection on the remote desktop clients. B. Disable drive redirection on the RD Session Host server. C. Enable the Prevent installation of removable devices Group Policy Setting on the remote desktop clients. D. Enable the Prevent installation of removable devices Group Policy setting on the RD Session Host server. Correct Answer: D /Reference: : Prevent Installation of Removable Devices You can use this procedure to prevent installation of any removable device. A device is considered removable when its device driver, or the device driver for the bus to which the device is attached, reports that it is a removable device. If this policy is enabled, in addition to preventing installation of the affected devices, it also prevents users from updating the device drivers for already installed devices that match the policy. technet.microsoft.com/en-us/library/cc753539(v=ws.10).aspx QUESTION 34 Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. You need to deploy Microsoft Application Virtualization (App-V) 4.6 in a stand-alone configuration. Which should you install? A. Microsoft Application Virtualization Database B. Microsoft Application Virtualization Desktop Client C. Microsoft System Center Application Virtualization Streaming Server D. Microsoft System Center Application Virtualization Management Server Correct Answer: B /Reference: : "A Composite Solution With Just One Click" - Certification Guaranteed 29 Microsoft Exam QUESTION 35 Your company has an Active Directory Domain Services (AD DS) domain. You have a main office and a branch office that are connected by a slow WAN link. A file server that runs Windows Server 2008 R2 is located in the branch office. All other servers are located in the main office. You virtualize an application by using MIcrosoft Application Virtualizaetion (App-V) 4.5. The available bandwidth is not sufficient for branch office users to run the virtualized application. You need to ensure that branch office users can run the virtualized application by using the Microsoft Application Virtualization Desktop Client. What should you do? A. Configure BranchCache in Host Cache mode. B. On each client computer in the branch office, upgrade the App-V desktop clients to 4.6. C. On the file server in the branch office, install the Remote Differential Compression feature.