Building Tizen Development Environment
|
|
- Blaise Hunter
- 6 years ago
- Views:
Transcription
1 Building Tizen Development Environment Minsoo Ryu Real-Time Computing and Communications Lab. Hanyang University
2 Tizen 2.3 Development Environment Target hardware device Tizen Reference Device-PQ (RD-PQ) Display Chipset CPU Sensors Camera WiFi Bluetooth GPS Super AMOLED capacitive touch screen with 16M colors. Size 720 X 1280 pixels. Exynos Quad Quad-core 1.4GHz Cortex-A9 Accelerometer, Gyro, Proximity, Magnetic etc. Primary 8MP, Secondary 1.9MP Yes Yes No? (emulated) Tizen is installed in current RD-PQ Our target Tizen platform is 2.2.1, so we need to upgrade the device with Tizen
3 Tizen 2.3 Development Environment Download the following images from #Bootloader mobile/bootloader/migrate_2.3_bootloader.tar.gz #Mobile boot image mobile_ /images/target/mobile_boot/tizen-2.3- mobile_ _mobile_boot.tar.gz #Mobile platform Image mobile_ /images/target/mobile_target/tizen-2.3- mobile_ _mobile_target.tar.gz Remark: Tizen 2.3 is based on Linux kernel
4 Upgrading Tizen to Tizen 2.3 Bootloader upgrade Enter the download mode of your device with PowerKey+VolDown Fuse the migrate_2.3_bootloader.tar.gz using lthor $ Sudo lthor migrate_2.3_bootloader.tar.gz Platform upgrade Enter the download mode for your device with PowerKey+VolDown Flash the boot image and the platform image $ Sudo lthor tizen-2.3-mobile_ _mobile_boot.tar.gz tizen- 2.3-mobile_ _mobile_target.tar.gz 4 4
5 Setting Up Gerrit Access 1. Registering a user account to gain access to tizen.org 2. Configuring Secure Shell (SSH) for Gerrit access 3. Configuring Git 5 5
6 Registering a User Account 6 6
7 Configuring Secure Shell (SSH) Generate RSA keys by executing the following command $ ssh-keygen Follow the on-screen prompt Enter file in which to save the key (/home/(user)/.ssh/id_rsa) : Enter passphrase (empty for no passphrase) : Enter same passphrase again : Create an SSH configuration file with a full path of ~/.ssh/config $ vim ~/.ssh/config 7 7
8 Configuring Secure Shell (SSH) Insert your Tizen ID Host tizen review.tizen.org Hostname review.tizen.org IdentityFile ~/.ssh/id_rsa User Tizen ID Port #The line below is optional configuration applicable to Ubuntu and opensuse. #Add when using proxy, otherwise, skip it. #ProxyCommand nc -X5 -x : %h %p #The line below is optional configuration applicable to Fedora. #Add when using proxy, otherwise, skip it. #ProxyCommand nc --proxy-type socks4 --proxy : %h %p 8 8
9 Configuring Secure Shell (SSH) SSH public key vim ~/.ssh/id_rsa.pub Register SSH public key 9 9
10 Configuring Secure Shell (SSH) Check SSH connection $ ssh tizen **** Welcome to Gerrit Code Review **** Hi Kyusang Choi, you have successfully connected over SSH. Unfortunately, interactive shells are disabled. To clone a hosted Git repository, use: git clone ssh://kyusang@review.tizen.org:29418/repository_name.git 10 10
11 Configuring Git Install Git $ sudo apt-get install git Configure Git $ git config --global user.name name" $ git config --global user. address" 11 11
12 Installing Tizen Development Tools Configure Tizen tools repository (Ubuntu LTS) $ sudo vim /etc/apt/sources.list deb / $ sudo apt-get update Install gbs, mic package $ sudo apt-get install gbs mic $ sudo apt-get update $ sudo apt-get upgrade 12 12
13 Cloning Tizen v2.3 Source Create ~/bin/ subdirectory, include it in PATH $ mkdir ~/bin/ $ PATH=~/bin:$PATH Download the repo script by executing the following command : $ curl > ~/bin/repo Change the attribute of repo $ sudo chmod a+x ~/bin/repo Create a new directory $ mkdir ~/<Tizen_Project> $ cd ~/<Tizen_Project> 13 13
14 Cloning Tizen v2.3 Source Initialize the repository Tizen 2.3 $ repo init -u ssh://<username>@review.tizen.org:29418/scm/manifest -b tizen_2.3 Synchronize the repository $ repo sync 14 14
15 Git Build System (GBS) GBS A developer command line tool that supports Tizen package development It's used to generate tarballs based on Git repositories, to do local test buildings, and to submit code to OBS (Tizen's main build service) 15 15
16 Git Build System (GBS) Prebuilt binary packages The <Tizen_Project>/pre-built directory contains a group of prebuilt projects that provides base and toolchain binary RPM packages for GBS build. Dependency cycles in Repos Building packages with dependency cycles is not supported by GBS. Known cycles are as follows: gcc->eglibc->gcc gcc->binutils->gettext->gcc gettext->gcc->eglibc->gettext cmake->curl->c-ares->cmake filesystem->setup->filesystem aul->privacy-manager-server->aul libtool->texinfo->libzio->bzip2->libtool libmm-sound->avsystem->pulseaudio->system-server- >libfeedback->libmm-sound 16 16
17 Git Build System (GBS) Accelerator Packages Tizen provides cross-compilers and other accelerator packages, as shown below, in <Tizen_Project>/pre-built/toolchain-arm/ for ARM build. bash,bzip2-libs,c-ares,cmake,coreutils,diffutils,eglibc,elfutils-libelf,elfutilslibs,elfutils,fdupes,file,findutils,gawk,gmp,gzip,libacl,libattr,libcap,libcurl,libfile,libgcc,libl ua,libstdc++,make,mpc,mpfr,ncurses-libs,nodejs,nspr,nss-softoknfreebl,nss,openssl,patch,popt,rpm-build,rpm-libs,rpm,sed,sqlite,tar,xzlibs,zlib,binutils,gcc For the first build, these packages need to be excluded, otherwise built out packages will be installed and used, which will make accelerator packages fail to work
18 Building a Specific Package Move to Project folder $ cd <Project folder> Configuring.gbs.conf [general] profile = profile.tizen [profile.tizen] user = ID passwdx = password obs = obs.tizen repos = repo.tizen_latest [repo.tizen_latest] url = mobile_ /repos/target/packages/ 18 18
19 Cloning a Specific Package over SSH Clone the required package by executing the following command $ git clone ssh: //<Username>@review.tizen.org:29418/framework/system/sen sord You can check if it is the master branch by executing the following command $ git branch a Build package in architecture armv7l $ gbs build -A armv7l include-all 19 19
20 MIC Image Creator MIC is an image creator It's used to create images for Tizen With the MIC tool, users can create images of different types for different verticals, including live CD images, live USB images, raw images for KVM, loop images for IVI platforms, and fs images for chrooting entire framework Result of specific built package 20 20
21 Creating a Tizen Image with MIC Preparing the Kickstart File $ wget mobile_ /images/target/mobile_target/tizen-2.3- mobile_ _mobile_target.ks Create a Tizen Image $ sudo mic create loop <KS-File> --local-pkgs-path=<localpath>/ -- pack-to=<image name>.tar.gz $ sudo mic create loop tizen-2.3- mobile_ _mobile_target.ks --local-pkgspath=localpath/ --pack-to=tizen_0416.tar.gz Note that tizen_0416 is the result of MIC and localpath is the result of GBS KS-File is a kickstart file that we already downloaded 21 21
22 Putting Image into RD-PQ $ sudo lthor tizen-2.3-mobile_ _mobile_boot.tar.gz tizen_0416.tar.gz 22 22
Building Tizen Development Environment
Building Tizen Development Environment Minsoo Ryu Real-Time Computing and Communications Lab. Hanyang University msryu@hanyang.ac.kr Outline Install Ubuntu on Virtual Machine Build Tizen Development Environment
More informationTizen Project Guideline. SKKU Embedded Software Lab.
1 Tizen Project Guideline Tizen Project Process 2 Assume that you have done flashing Tizen images. 1. Preparation Install Tizen Development Environments 2. Github 1. Sign in Github 2. Make an Organization
More informationBest Practice for Tizen Platform from Code to Device. Zhang, Qiang Chen, Gui (Intel Open Source Technology Center)
Best Practice for Tizen Platform from Code to Device Zhang, Qiang Chen, Gui (Intel Open Source Technology Center) Agenda Tizen Development Tools Workflow Overview Downloading Tizen source code Building
More informationTizen * IVI Hands-on Lab
Tizen * IVI Hands-on Lab Geoffroy VanCutsem, Technical Marketing Engineer, Intel Tosh Mitsue, Technical Marketing Engineer, Intel Tonny Tzeng, Technical Marketing Engineer, Intel SFTL004 Agenda Lab Objective
More informationGIT. A free and open source distributed version control system. User Guide. January, Department of Computer Science and Engineering
GIT A free and open source distributed version control system User Guide January, 2018 Department of Computer Science and Engineering Indian Institute of Technology, Kharagpur Table of Contents What is
More informationOne-click Solution for Tizen Image Creation Based on Jenkins Framework. Zhang, Qiang (Intel Open Source Technology Center)
One-click Solution for Tizen Image Creation Based on Jenkins Framework Zhang, Qiang (Intel Open Source Technology Center) Agenda Tizen Build Workflow Overview Detailed steps Downloading Tizen Source Code
More informationGetting the Source Code
Getting the Source Code The CORD source code is available from our Gerrit system at gerrit.opencord.org. Setting up a Gerrit account and ssh access will also enable you to submit your own changes to CORD
More informationTizen.IoTivity.Init. Tizen IoTivity 를시작하기위한환경설정. Geunsun Lee
Tizen.IoTivity.Init Tizen IoTivity 를시작하기위한환경설정 Geunsun Lee 1 Installing Tizen Platform How to install IoT Headless image on RPi3(for Ubuntu) 2 Booting The RPi3 Connecting a Host PC to RPi3 via UART 3 Building
More informationIoTivity Programmer s Guide Resource Encapsulation
IoTivity Programmer s Guide Resource Encapsulation 1 CONTENTS 2 Revision History... 4 3 Terminology... 5 4 Introduction to Resource Encapsulation... 6 4.1 Overall Architecture... 6 4.2 Iotivity Service
More informationREX-RED Community Android 4.3
REX-RED Community Android 4.3 Build Guide REXNOS CO.,Ltd Document Information Version 1.1 File Name REX5260 Android 4.3 Build Guide.doc Date May 20, 2014 Status Working Revision History Date Version Update
More informationLab 6: OS Security for the Internet of Things
Department of Computer Science: Cyber Security Practice Lab 6: OS Security for the Internet of Things Introduction The Internet of Things (IoT) is an emerging technology that will affect our daily life.
More informationCS3210: Operating Systems
CS3210: Operating Systems Lab 1 Tutorial 1 / 39 Lab session general structure Session A - overview presentation (30 min) Concepts, tutorial, and demo Session B - group activity (30 min) Each student will
More informationTizen TCT User Guide
Tizen 2.3.1 TCT User Guide Table of Contents 1. Environment setup... 3 1.1. Symbols and abbreviations... 3 1.2. Hardware Requirements... 3 1.3. Software Requirements... 3 2. Getting TCT-source and TCT-manager...
More informationZephyr Kernel Installation & Setup Manual
Zephyr Kernel Installation & Setup Manual Zephyr kernel is a small footprint Single address space OS, i.e, it combines application specific code with a custom kernel to create a monolithic image that gets
More informationSCM-i.MX 6 Series Yocto Linux User's Guide
NXP Semiconductors Document Number: SCMIMX6LRNUG User's Guide Rev. L4.1.15-2.0.0-ga, 04/2017 SCM-i.MX 6 Series Yocto Linux User's Guide 1. Introduction The NXP SCM Linux BSP (Board Support Package) leverages
More informationMars ZX3 Android manual. Antmicro
Mars ZX3 Android manual Antmicro Sep 27, 2017 Contents 1 Introduction 1 1.1 Acknowledgements..................................... 1 1.2 Version information..................................... 1 2 Compiling
More informationThe Automotive Grade Linux Build Service. ALS Tokyo '14, Jan-Simon Möller
The Automotive Grade Linux Build Service ALS Tokyo '14, Jan-Simon Möller The Automotive Grade Linux (AGL) initiative... is about improving open source components for automotive use cases using a common
More informationCSCI 350 Virtual Machine Setup Guide
CSCI 350 Virtual Machine Setup Guide This guide will take you through the steps needed to set up the virtual machine to do the PintOS project. Both Macintosh and Windows will run just fine. We have yet
More informationWES 237A Project Part 1 Guide
WES 237A Project Part 1 Guide A. Environment Setup Guide Goals The purpose of this document is to prepare your development machine for the project by: 1. Installing any missing, required tools 2. Setting
More informationLab 6: OS Security for the Internet of Things
Department of Computer Science: Cyber Security Practice Lab 6: OS Security for the Internet of Things Introduction The Internet of Things (IoT) is an emerging technology that will affect our daily life.
More informationAbout the Tutorial. Audience. Prerequisites. Copyright & Disclaimer. Gerrit
Gerrit About the Tutorial Gerrit is a web-based code review tool, which is integrated with Git and built on top of Git version control system (helps developers to work together and maintain the history
More informationCubieboard4 Linux Sdk Guide TF BOOT & TF WRITE EMMC. Website: Support:
Cubieboard4 Linux Sdk Guide TF BOOT & TF WRITE EMMC Website:http://cubieboard.org/ Support: support@cubietech.com Version Author Modification Check V-0.1-20141226 A.K Init version V-1.0-20150113 A.K Release
More informationGit & Github Fundamental by Rajesh Kumar.
Git & Github Fundamental by Rajesh Kumar About me Rajesh Kumar DevOps Architect @RajeshKumarIN www.rajeshkumar.xyz www.scmgalaxy.com 2 What is git Manage your source code versions Who should use Git Anyone
More informationTizen EFL UTC User Guide
Tizen 2.3.1 EFL UTC User Guide Table of Contents 1. Environment setup... 3 1.1. Symbols and abbreviations... 3 1.2. Hardware Requirements... 3 1.3. Software Requirements... 3 2. Making the EFL UTC package...
More informationMOOSE-Based Application Development on GitLab
MOOSE-Based Application Development on GitLab MOOSE Team Idaho National Laboratory February 22, 2016 Introduction The intended audience for this talk is developers of INL-hosted, MOOSE-based applications.
More informationIoTivity Development on ARTIK 530s
Getting Started Guide Sungdong Kim SAMSUNG IoTivity Development on ARTIK 530s G E T T I N G S T A R T E D G U I D E Version 1.0, October 24, 2018 Table of Contents Summary... 3 OCF and IoTivity... 3 The
More informationCreating a profile from Tizen:Common. Stéphane Desneux Senior Software Engineer Eurogiciel
Creating a profile from Tizen:Common Stéphane Desneux Senior Software Engineer Eurogiciel Eurogiciel IT Services Company Open source development and integration:
More informationTrinityCore Documentation
TrinityCore Documentation Release TrinityCore Developers February 21, 2016 Contents 1 Compiling TrinityCore 3 1.1 Requirements............................................... 3 1.2 Build Environment............................................
More informationCOLD WALLET + MASTERNODE SETUP ON LINUX
COLD WALLET + MASTERNODE SETUP ON LINUX This tutorial shows the steps required to setup your Magnet masternode on a Linux system while running a local cold wallet (Windows system here). Let s get started!
More informationCROWDCOIN MASTERNODE SETUP COLD WALLET ON WINDOWS WITH LINUX VPS
CROWDCOIN MASTERNODE SETUP COLD WALLET ON WINDOWS WITH LINUX VPS This tutorial shows the steps required to setup your Crowdcoin Masternode on a Linux server and run your wallet on a Windows operating system
More informationD1 - Embedded Linux. Building and installing an embedded and real-time Linux platform. Objectives. Course environment.
Training Embedded Linux: Building and installing an embedded and real-time Linux platform - Operating Systems: Linux D1 - Embedded Linux Building and installing an embedded and real-time Linux platform
More informationSimulation Manager Configuration Guide
Cornell University College of Veterinary Medicine Student Training Simulation Project Simulation Manager Configuration Guide 2018-Oct-1 Version 1.9 Prepared by: I-Town Design David Weiner 117 Burleigh
More informationu-root: / with the convenience of scripting and the performance of compilation
u-root: / with the convenience of scripting and the performance of compilation Ron Minnich Google Andrey Mirtchovski Cisco Outline What u-root is Why we re doing it How it all works Try it! sudo docker
More informationLab2 - Bootloader. Conventions. Department of Computer Science and Information Engineering National Taiwan University
Lab2 - Bootloader 1 / 20 Cross-compile U-Boot. Connect to Raspberry Pi via an USB-TTL cable. Boot Raspberry Pi via U-Boot. 2 / 20 Host Machine OS: Windows Target Machine Raspberry Pi (2 or 3) Build Machine
More informationBuilding a ROM for Android on Ubuntu in Virtualbox
Building a ROM for Android on Ubuntu 14.04 in Virtualbox 1. Introduction a) Read AOSP Tour from "Embedded Android" Book b) Created Ubuntu 14.04 Virtual Machine with 2 CPUs, 5GB RAM and 200GB dynamic allocation
More informationSetting up a Chaincoin Masternode
Setting up a Chaincoin Masternode Introduction So you want to set up your own Chaincoin Masternode? You ve come to the right place! These instructions are correct as of April, 2017, and relate to version
More informationSAROS MasterNode Guide V1.1
SAROS MasterNode Guide V1.1 Pre-requisites Local Windows wallet holding at least 1501 SAROS coins Remote VPS Ubuntu 14.04 VPS (in this guide I am using a XS ordered from www.masterhash.us) OVERVIEW This
More informationEECS 470 Lab 4. Version Control System. Friday, 31 st January, 2014
EECS 470 Lab 4 Version Control System Department of Electrical Engineering and Computer Science College of Engineering University of Michigan Friday, 31 st January, 2014 (University of Michigan) Lab 4:
More informationOxalis Getting Started
Oxalis Getting Started Document: Document: Getting Started Content of the document: Version: 001 First steps to power up, the board, to run uboot, Creator: ANT/MSB build kernel and boot linux. Date: 01.12.2018
More informationMesos on ARM. Feng Li( 李枫 ),
Mesos on ARM Feng Li( 李枫 ), Agenda I. Background Information ARM Ecosystem Today Raspberry Pi II. Build Mesos for ARM Cross Compiling Native Compilation Build Mesos with Ninja Summary III. Clang/LLVM-based
More informationPengwyn Documentation
Pengwyn Documentation Release 1.0 Silica October 03, 2016 Contents 1 Introduction 3 1.1 Platforms................................................. 3 1.2 Hardware requirements.........................................
More informationLinux. For BCT RE2G2. User Guide. Document Reference: BCTRE2G2 Linux User Guide. Document Issue: Associated SDK release: 1.
Linux For BCT RE2G2 User Guide Document Reference: BCTRE2G2 Linux User Guide Document Issue: 1.05 Associated SDK release: 1.04 Author: D Robinson Contents Introduction... 3 Environment Setup... 3 Required
More informationDEVELOPMENT GUIDE VAB-630. Linux BSP v
DEVELOPMENT GUIDE VAB-630 Linux BSP v1.0.1 100-09182017-114400 Copyright Copyright 2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
More informationSmartCash SmartNode Setup Guide v1.2. Windows 10. Date: 13/01/2018. By (Jazz) yoyomonkey
SmartCash SmartNode Setup Guide v1.2 Date: Introduction Welcome to this step by step guide that will take you through the process of creating your own SmartCash SmartNode. This guide is aimed at the casual
More informationSmartCash SmartNode Setup Guide V1.2 Windows 10 13/01/2018 By (Jazz) yoyomonkey Page 1
SmartCash SmartNode Setup Guide v1.2 Date: Introduction Welcome to this step by step guide that will take you through the process of creating your own SmartCash SmartNode. This guide is aimed at the casual
More informationIntroduction to Git and Github Repositories
Introduction to Git and Github Repositories Benjamin Audren École Polytechnique Fédérale de Lausanne 29/10/2014 Benjamin Audren (EPFL) CLASS/MP MP runs 29/10/2014 1 / 16 Version Control survey Survey Who
More informationCross-compilation with Buildroot
Instituto Superior de Engenharia do Porto Mestrado em Engenharia Eletrotécnica e de Computadores Arquitetura de Computadores Cross-compilation with Buildroot Introduction Buildroot is a tool that can be
More informationYocto Project components
Lecture 3 3 Yocto Project components 25 octombrie 2016 Exam questions 1. Please write al least four of the described components of a GNU toolchain 2. List the components which define a Linux distribution
More informationThe instructions in this document are applicable to personal computers running the following Operating Systems:
Preliminary Notes The instructions in this document are applicable to personal computers running the following Operating Systems: Microsoft Windows from version 7 up to 10 Apple Mac OS X from versions
More informationVersion Control. Software Carpentry Github s Hello World Git For Ages 4 And Up You need source code control now
A version control system (VCS) is a tool or system for keeping track of changes in files. A primitive form of VCS would be making a copy of a file every time you want to make a new version of the file.
More informationSchool of Computing Science Gitlab Platform - User Notes
School of Computing Science Gitlab Platform - User Notes Contents Using Git & Gitlab... 1 Introduction... 1 Access Methods... 2 Web Access... 2 Repository Access... 2 Creating a key pair... 2 Adding a
More informationPorting Tizen-IVI 3.0 to an ARM based SoC Platform
Porting Tizen-IVI 3.0 to an ARM based SoC Platform Damian Hobson-Garcia Automotive Linux Summit July 1-2, 2014 Tokyo, Japan Tizen IVI support Until recently Intel architecture (x86) system Tizen IVI 2.0alpha,
More informationDigi Embedded Yocto 1.6. First Steps Guide
Digi Embedded Yocto 1.6 First Steps Guide Revision history 90001423 Revision Date Description E July, 2015 Updated to Digi Embedded Yocto 1.6.6 F October, 2015 Updated to Digi Embedded Yocto 1.6.7 G November,
More informationPackage Management Over Tor
Package Management Over Tor Alexander Nasonov alnsn@netbsd.org 1 The NetBSD Project 2 XMM Swap Ltd February 2018, FOSDEM, Brussels About Myself Member of the NetBSD project Author of bpfjit and aes-xts
More informationDEVELOPMENT GUIDE VIA AMOS-825. Linux BSP v
DEVELOPMENT GUIDE VIA AMOS-825 Linux BSP v3.0.4 1.00-10042018-155700 Copyright Copyright 2018 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted,
More informationOverview. during this tutorial we will examine how touse git from the command line. finally we will explore a graphical visualisation of git activity
Overview slide 1 during this tutorial we will examine how touse git from the command line we will also browse some of the files in the linux kernel and gcc finally we will explore a graphical visualisation
More informationDEVELOPMENT GUIDE AMOS-820. Linux BSP v
DEVELOPMENT GUIDE AMOS-820 Linux BSP v4.1.1 1.00-05242017-134700 Copyright Copyright 2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
More informationAndroid System Development Training 4-day session
Android System Development Training 4-day session Title Android System Development Training Overview Understanding the Android Internals Understanding the Android Build System Customizing Android for a
More informationDEVELOPMENT GUIDE VAB-630. Android BSP v
DEVELOPMENT GUIDE VAB-630 Android BSP v1.0.3 1.00-08112017-153900 Copyright Copyright 2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
More informationThe TinyHPC Cluster. Mukarram Ahmad. Abstract
The TinyHPC Cluster Mukarram Ahmad Abstract TinyHPC is a beowulf class high performance computing cluster with a minor physical footprint yet significant computational capacity. The system is of the shared
More informationIntel Do-It-Yourself Challenge Compile C/C++ for Galileo Nicolas Vailliet
Intel Do-It-Yourself Challenge Compile C/C++ for Galileo Nicolas Vailliet www.intel-software-academic-program.com paul.guermonprez@intel.com Intel Software 2014-02-01 Why? C/C++ code? Why C/C++ code? Arduino
More informationCentreon SSH Connector Documentation
Centreon SSH Connector Documentation Release 1.1.2 Centreon November 24, 2015 Contents i ii Centreon SSH Connector is a free software from Centreon available under the Apache Software License version
More informationBuilding CircuitPython
Building CircuitPython Created by Dan Halbert Last updated on 2018-05-18 03:47:12 AM UTC Guide Contents Guide Contents Introduction Linux Setup Install a Real or Virtual Linux Machine Native Linux Linux
More informationDC/OS on Google Compute Engine
DC/OS on Google Compute Engine You can configure a DC/OS cluster on Google Compute Engine (GCE) by using these scripts. Configure bootstrap node Install the DC/OS GCE scripts Configure parameters Important:
More informationUsing Openembedded with Snapdragon Flight
April 2016 Mark Charlebois Using Openembedded with Snapdragon Flight Background Snapdragon Flight board is available from Intrinsyc Based on Qualcomm APQ8074 Uses 3.4 kernel (Android) and Linux userspace
More information1. Install a Virtual Machine Download Ubuntu Create a New Virtual Machine Seamless Operation between Windows an Linux...
Introduction APPLICATION NOTE The purpose of this document is to explain how to create a Virtual Machine on a Windows PC such that a Linux environment can be created in order to build a Linux kernel and
More informationPorting Tizen-IVI 3.0 to an ARM based SoC Platform. Damian Hobson-Garcia, IGEL Co., Ltd.
Porting Tizen-IVI 3.0 to an ARM based SoC Platform Damian Hobson-Garcia, IGEL Co., Ltd. Current State of Affairs Intel architecture (x86) system Tizen IVI 2.0alpha, Tizen IVI 3.0 ARM architecture based
More informationSUB1X Masternode Setup Guide: LINUX Version
SUB1X Masternode Setup Guide: LINUX Version What you will need for this guide: 1) Local computer with Windows, MacOS or Linux. 2) Remote server VPS [Vultr.com or AWS for instance] 3) PuTTY to configure
More informationEmbedded Linux. A Tour inside ARM's Kernel
Embedded Linux A Tour inside ARM's Kernel Contents 1. Shell basics 2. Introduction to Embedded Linux 3. Kernel Programming for Module / Driver Installation 4. Module / Device Driver in RPi 5. Cross Compiling
More informationLab #9: Configuring A Linux File Server
Lab #9 Page 1 of 6 Theory: Lab #9: Configuring A Linux File Server The Network File System (NFS) feature provides a means of sharing Linux file systems and directories with other Linux and UNIX computers
More informationContainers. Pablo F. Ordóñez. October 18, 2018
Containers Pablo F. Ordóñez October 18, 2018 1 Welcome Song: Sola vaya Interpreter: La Sonora Ponceña 2 Goals Containers!= ( Moby-Dick ) Containers are part of the Linux Kernel Make your own container
More informationSmartCash SmartNode SCRIPT Setup Guide v2.2. Windows 10. Date: 20/02/2018. By (Jazz) yoyomonkey
SmartCash SmartNode SCRIPT Setup Guide v2.2 Date: Introduction Welcome to this step by step guide that will take you through the process of creating your own SmartCash SmartNode. This guide is aimed at
More informationGitlab Setup/Usage by Yifeng Zhu modified by Vince Weaver 30 January 2019
ECE271: Microcomputer Architecture and Applications University of Maine Gitlab Setup/Usage by Yifeng Zhu modified by Vince Weaver 30 January 2019 Background We will submit our labs in ECE271 via git to
More informationIntroduction of Linux
Introduction of Linux 阳 oslab2018_class1@163.com 寅 oslab2018_class2@163.com PART I Brief Introduction Basic Conceptions & Environment Install & Configure a Virtual Machine Basic Commands PART II Shell
More informationDEVELOPMENT GUIDE VIA VAB-820. Android BSP v
DEVELOPMENT GUIDE VIA VAB-820 Android BSP v5.0.9 1.00-12202018-135700 Copyright Copyright 2018 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted,
More informationGit Command Line Tool Is Not Installed
Git Command Line Tool Is Not Installed Make Sure It Is Accessible On Y Error: "git" command line tool is not installed: make sure it is accessible on y I have installed git tool. even in git bash its showing
More informationIf you had a freshly generated image from an LCI instructor, make sure to set the hostnames again:
Storage Node Setup A storage node (or system as your scale) is a very important unit for an HPC cluster. The computation is often about the data it produces and keeping that data safe is important. Safe
More informationFtp Command Line Commands Linux Example Windows Put
Ftp Command Line Commands Linux Example Windows Put Examples of typical uses of the command ftp. This lists the commands that you can use to show the directory contents, transfer files, and delete files.
More informationMariaDB ColumnStore C++ API Building Documentation
MariaDB ColumnStore C++ API Building Documentation Release 1.1.3-acf32cc MariaDB Corporation Feb 22, 2018 CONTENTS 1 Licensing 1 1.1 Documentation Content......................................... 1 1.2
More informationa. puppet should point to master (i.e., append puppet to line with master in it. Use a text editor like Vim.
Head Node Make sure that you have completed the section on Precursor Steps and Storage. Key parts of that are necessary for you to continue on this. If you have issues, please let an instructor know to
More informationswiftenv Documentation
swiftenv Documentation Release 1.3.0 Kyle Fuller Sep 27, 2017 Contents 1 The User Guide 3 1.1 Installation................................................ 3 1.2 Getting Started..............................................
More informationLab4 Embedded Linux. Introduction
Introduction Lab4 Embedded Linux In this lab we will run Embedded Linux on the Arcom board. This allows us to use operating system services (such as inter-task communication) and use existing software
More informationHelix4Git Administrator Guide March 2018
Helix4Git Administrator Guide 2018.1 March 2018 Copyright 2015-2018 Perforce Software All rights reserved. Perforce Software and documentation is available from www.perforce.com. You can download and use
More informationDevelopment Environment Embedded Linux Primer Ch 1&2
Development Environment Embedded Linux Primer Ch 1&2 Topics 1) Systems: Host and Target 2) Host setup 3) Host-Target communication CMPT 433 Slides #3 Dr. B. Fraser 18-05-05 2 18-05-05 1 Host & Target Host
More informationHelix4Git Administrator Guide October 2017
Helix4Git Administrator Guide 2017.2 October 2017 Copyright 2015-2018 Perforce Software All rights reserved. Perforce Software and documentation is available from www.perforce.com. You can download and
More informationVaango Installation Guide
Vaango Installation Guide Version Version 17.10 October 1, 2017 The Utah Vaango team and Biswajit Banerjee Copyright 2015-2017 Parresia Research Limited The contents of this manual can and will change
More informationOTC Tools Development and Release process. Igor Stoppa & Eduard Bartosh & JF Ding V May 2013
OTC Tools Development and Release process Igor Stoppa & Eduard Bartosh & JF Ding V0.12 23 May 2013 Purpose of the document This document describes development and release workflow for the following projects:
More informationTangeloHub Documentation
TangeloHub Documentation Release None Kitware, Inc. September 21, 2015 Contents 1 User s Guide 3 1.1 Managing Data.............................................. 3 1.2 Running an Analysis...........................................
More informationEmbedded. Connected. Aware. SW Delivery Process. February Inforce Computing. Do NOT Copy/Distribute without prior written permission
2016 Inforce Computing. Do NOT Copy/Distribute without prior written permission Embedded. Connected. Aware. SW Delivery Process February 2016 BSP Delivery The overall BSP package which is downloaded from
More informationGit Guide. Meher Krishna Patel. Created on : Octorber, 2017 Last updated : October, More documents are freely available at PythonDSP
Git Guide Meher Krishna Patel Created on : Octorber, 2017 Last updated : October, 2018 More documents are freely available at PythonDSP Table of contents Table of contents i 1 Commands Summary 1 2 Git
More informationi.mx7dual L4.1.15_2.0.0
a module solution provider i.mx7dual L4.1.15_2.0.0 WL8 integration Release Note Date: 2017/01/10 Copyright JORJIN TECHNOLOGIES INC. 2017 Version History Date Version Remark 2017/01/10 Ver.0.1 The initial
More informationWelcome to getting started with Ubuntu Server. This System Administrator Manual. guide to be simple to follow, with step by step instructions
Welcome to getting started with Ubuntu 12.04 Server. This System Administrator Manual guide to be simple to follow, with step by step instructions with screenshots INDEX 1.Installation of Ubuntu 12.04
More informationHands-on with the Sitara Linux SDK
Hands-on with the Sitara Linux SDK This presentation provides a hands-on overview of the Sitara Linux SDK. It focuses on the software and tools found in the SDK and how to use these tools to develop for
More informationContents. Note: pay attention to where you are. Note: Plaintext version. Note: pay attention to where you are... 1 Note: Plaintext version...
Contents Note: pay attention to where you are........................................... 1 Note: Plaintext version................................................... 1 Hello World of the Bash shell 2 Accessing
More informationopensuse Packaging for the osmocom stack Martin Hauke
opensuse Packaging for the osmocom stack Martin Hauke mardnh@gmx.de 21.04.2018 Intro Why opensuse? It s my favourite Linux distribution (open)suse has great tools and infrastructure OBS, OpenQA, KIWI opensuse
More informationAndroid ROM Porting: A Review
MIT International Journal of Computer Science and Information Technology, Vol. 5, No. 2, August 2015, pp. 71-75 71 Android ROM Porting: A Review Shubham Raj Singh er.shubhamrajs@gmail.com Rameez Arshad
More informationVersion Control with GIT
Version Control with GIT Benjamin Roth CIS LMU München Benjamin Roth (CIS LMU München) Version Control with GIT 1 / 30 Version Control Version control [...] is the management of changes to documents, computer
More informationDEVELOPMENT GUIDE VAB-820. Android BSP v
DEVELOPMENT GUIDE VAB-820 Android BSP v5.0.6 1.01-08112017-095100 Copyright Copyright 2017 VIA Technologies Incorporated. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
More informationOpenStack Havana All-in-One lab on VMware Workstation
OpenStack Havana All-in-One lab on VMware Workstation With all of the popularity of OpenStack in general, and specifically with my other posts on deploying the Rackspace Private Cloud lab on VMware Workstation,
More informationBoot your computer into GNU/Linux. Overview. Introduction to git on the command line. Introduction to git on the command line
Overview slide 1 slide 2 Boot your computer into GNU/Linux during this tutorial we will examine how touse git from the command line we will also browse some of the files in the linux kernel and gcc if
More information