WR-48 ROUTER TABLE HAND HELD CONTROL

Transcription

1 OPERATOR S MANUAL WR-48 ROUTER TABLE HAND HELD CONTROL Baileigh Industrial, Inc. P.O. Box 3 Manitowoc, WI Phone: Fax: sales@baileighindustrial.com REPRODUCTION OF THIS MANUAL IN ANY FORM WITHOUT WRITTEN APPROVAL OF BAILEIGH INDUSTRIAL, INC. IS PROHIBITED. Baileigh Industrial, Inc. does not assume and hereby disclaims any liability for any damage or loss caused by an omission or error in this Operator s Manual, resulting from accident, negligence, or other occurence. 203 Baileigh Industrial, Inc. Rev. 9/203

2 Table of Contents.0 Characteristics Cautions CONTROLLER APPLICATION Button Functions Compound Buttons Home Operation Modes Menu Setup MACHINE SETUP Machine Setup Parameters AUTO PRO SETUP AutoPro Setup Parameters SYSTEM SETUP System Setup Parameters ADVANCED PRO SETUP Advanced Pro System Parameters VERSION VIEW PROCESS Manual Process Auto Process Advanced Process RZNC - 00 Specifications... 28

3 .0 Characteristics. Totally independent from PC platform. 2. Directly read files from U Disk. 3. Easily process G code or PLT file with super-size. 4. Strong system and process file examining function.. Easy to update system program. 6. It supports high micro step which makes precise and fast process possible. 7. Support to process part of the file. 8. Reliable data protection and recover function. 9. Friendly operating interface. 2.0 Cautions. Do Not use this product in strong magnetic fields or areas of interference. 2. Do Not remove USB Drive while it is running a file. 3. Protect it from water, moisture, dust, and heat. 4. Protect it from metal contaminates getting into the cover.. Do Not remove cover. There are no user serviceable components inside. 6. Plug U disk and other cables gently into the device.

4 3.0 CONTROLLER APPLICATION The hand held pendant connects to the 3-axis stepper controller via the supplied cable. With the pendant you can download G-code programs using the USB port and a memory stick or by connecting to a computer using the USB type B connector at the bottom of the unit. You also have the ability to Home and position the head as needed. Other functions include changing parameters such as process speed, acceleration, and C.A.D. material thickness. The menu button accesses various setup screens for performing self checks and system updates. Goto Home? + Y + 2 Z + 3 Y 0 4 Y 6 Z 7 Z 0 8 HOME 9 HIGH/LOW 0 ON/OFF MENU MODE RUN/PAUSE DELETE 2 2

5 3. Button Functions Button + Y + 2 Z + 3 Y 0 4 Y 6 Z 7 Z 0 8 HOME 9 Function Positive movement of axis, Menu scroll up, Input for the digit Positive movement of Y axis, Increase process speed, Input for the digit 2, Menu Scrolling Positive movement of Z axis, Input for the digit 3, Raise spindle speed during process. Working origin of axis and Y axis setting (zeroing), Input for the digit 4 Negative movement of axis, Menu scroll down, Input for the digit Negative movement of Y axis, decrease process speed; Input for the digit 6, Menu Scrolling Negative movement of Z axis, Input for the digit 7, Lower spindle speed during process. Working origin of Z axis setting (zeroing), Input for the digit 8 Returns the axises to the Home position, Input for the digit 9 HIGH/LOW 0 Manual moving mode, high speed or low speed selection, Input for the digit 0 ON/OFF MENU Spindle Startup/Stop, Used with the Menu button to control C.A.D. functions, Input for the decimal point Access to setup Menus, Input for the negative symbol, multi process state checking All axes go to working origin, Confirm of motions, or inputting, or operating MODE Toggles between the three jogging modes: Continuous, Step or Distance. RUN/PAUSE DELETE Used to load a program from either the USB drive or internal memory. While the program is running, causes the Operation to Pause. Stops a running program. Also used to cancel commands. 3 3

6 3.2 Compound Buttons There are some compound buttons to be used for special applications. The procedure is to press the first button and hold, then press the second button. Now release the two buttons at the same time. The functions of the compound buttons are listed below:. MENU + digit button = switch the working coordinate 2. MENU + ON/OFF = C.A.D. function RUN/PAUSE 3. DELETE + digit button = stop point process 4. RUN/PAUSE DELETE + HIGH/LOW 0 = advanced process. + = help information 3.3 Home Operation Modes When power is turned on to the hand held unit, the Z axis goes to it s home position and the message Goto Home? appears on the screen. If you want the head to go to the 0,0 home position, determined by the,y axis proximity switches, press the RUN/PAUSE button. If you do not want the head to go to the 0,0 home position, press the is in Manual state, press HOME 9 DELETE button. When the hand held unit and the head will go to the 0,0 home position. While it is going home, pressing the button will stop the head at it s current location. CAUTION: As the head is going home, watch for any potential points of interference that could damage the spindle head. 4 4

7 3.4 Menu Setup Upon reaching home position, the unit will be in Manual state and appear as shown: MANL Y AOFF Z HIGH Continuous MENU Press the button to enter the menu screen. There are five headings but only four can be viewed at any one time.the fifth heading is VERSION VIEW. Press the + or buttons to scroll through them. MACHINE SETUP AUTO PRO SETUP SYSTEM SETUP ADVANCED PRO S

8 4.0 MACHINE SETUP The parameters shown in the MACHINE SETUP menu below should only be changed by an experienced operator. Failure to do so may result in incorrect machine motions and possible machine damage. Pulse Equiv Table Size Motor Dir Home Setup Equival pulse / mm Axis: 6. Y Axis: 6. Z Axis: Motor Direction: Axis: Dir Y Axis: Dir Z Axis Dir Home Speed Home Direction Machine Size, mm Axis: Y Axis: Z Axis: Home Speed mm / min Axis: Y Axis: Z Axis: Set Home Direction Axis: Dir Y Axis: Dir Z Axis: Dir MACHINE SETUP Spindle Setup Spindle Delay Voltage Setup Input Spindle st 8e number Spindle Delay unit ms 4000 Input Volt Output Volt Line State when Spindle is off A B C D E F A B C D E F Spd Limit C.A.D. Thickness Screw Interspace Y Z Speed Limit Speed Limit Speed Limit C.A.D. Thickness unit mm Screwspace unit mm Axis: Y Axis: Z Axis: axis speed lim it, unitmm / min Dir Dir Y axis speed lim it, unitmm / min Dir Dir Z axis speed lim it, unitmm / min Dir Dir

9 4. Machine Setup Parameters 4.. Pulse Equivalent: Pulse equivalent means the pulse number when the axis moves mm. It s unit is pulse / mm. Pulse equivalent = (360 degrees / step angle). To change the current axis value, input the new number and press the not need to change, press button.to save it. The cursor moves to the next line. If it does to advance to the next line or to the previous menu. IMPORTANT: If the pulse equivalent in the controller is different from that of the engraving machine. The processed file size will NOT be to the drawn specification Table Size: Table size refers to the actual motion size of the 3 axes. Because the system applies the table size as the soft limit, you should set the table size with the number it actually is. Otherwise it will show as Over the Limit or it might run into the side rail. Press the will be on the axis value. If it needs to change, input the value directly and press button and the cursor save it. The cursor will move to the next line. If no changes are necessary, press until you + return to the menu. To move to another line in the menu press either the button to scroll up or the button to scroll down Motor Direction: Motor direction changes the moving direction of the motor. This setting affects all motion direction of the 3 axes. With the Motor Dir line highlighted, press the Motor Direction Axis screen. To change the direction of the axis press Press the + or to button to enter the to move the cursor to the next or previous line. If the direction does Y + 2 or Y 6. not need to change, press to exit and return to the previous menu. 7 7

10 4..4 Home Setup: Two parameters that can be changed are Home Speed and Home Direction. Home speed refers to how fast the head returns to the home position. Normally the Z axis home speed should be slower than the and Y axes. With the Home Setup line highlighted, press the button. Home Speed will be highlighted. Press the speeds of the 3 axes. button to enter and set the Home Speedmm/min Axis: Y Axis: Z Axis: Set Home Direction Axis: -Dir Y Axis: -Dir Z Axis: +Dir Input the new value. If you input a wrong number, press the RUN/PAUSE DELETE button to delete the previous one, and then enter the correct number. After finishing the input, press the button to confirm and save the new axis speed. The cursor moves to the Y axis speed automatically. If no change is necessary, press to move to the Z axis speed change. If a change is necessary, follow the above procedure. When you finish these settings it will return to the Home Speed menu. Press to move the cursor to the Set Home Direction line. Press to enter the setting. See the display as shown above. Press the Y + 2 or Y 6 to the next line. Press menu. buttons to change the current setting. Press to move the cursor to confirm and save the changes and to go back to the previous 8 8

11 4.. Spindle Setup The system offers the spindle control function. If the connection board and the converter have been connected, the spindle speed can be changed during process. Move cursor to Spindle Setup item then press to enter. Then it shows the value of spindle state, the default value is 8. If it needs to change, input the value directly then press to save. It will show the line state. Set the lines state according to the Converter. A down arrow means Multicast OFF state, an up arrow means ON state, press the to change property then press + to confirm all changes. If it does not need to change, press the previous menu. Spindle Setting: Spindle State: 8 Input Volt: 0 2 or Y + 2 button to move the cursor to next line, press or Y 6 to exit and go back to 9 9

12 4..6 Spindle Delay Spindle Delay is the delay time to allow the spindle to come up to full speed. The spindle delay is set in milliseconds. The default value is 4000 milliseconds. To change the current value, input the new number and press the does not need to change, press to advance to the previous menu. button.to save it. If it 4..7 Voltage Setup The voltage property menu shown in the Machine Setup chart has been set at the factory for both the Input Volt and the Output Volt. No further adjustments are required Speed Limit Speed limit stands for the MA speed of, Y, & Z axes. This is a default setting and was set at the factory. No further adjustments should be required. The machine will run at the default speed if you set up a processing speed higher than the default speed. axis speed lim it, unitmm / min Dir Dir Y axis speed lim it, unitmm / min Dir Dir Y Z Speed Limit Speed Limit Speed Limit Z axis speed lim it, unitmm / min Dir Dir

13 4..9 C.A.D. (Cutter Adjust Device) Thickness Cutter Adjust Device (C.A.D) is used to set the Z axis working origin. Users must set its thickness, otherwise the Z axis working origin will not be correct. If you have used this function, you need not press Y 0 4 to clear. It must have physical connection between the machine and connection board. The C.A.D function is accessed through the pressing of the compound buttons, MENU + ON/OFF. MENU ON/OFF Press button and then, then release them at the same time. Then Z axis goes down slowly, when it reaches the Cutter Adjust Disc, it will go up. The Z axis working origin is now set. C.A.D. Thickness DSP Board JOB Z (Zero)

14 4..0 Screw Interspace Screw Interspaces refers to the screw offset. Its value cannot exceed mm. Move cursor to Screw Interspaces item, then press to enter the item, cursor is on axis value automatically. If it needs to change the value, input the value by pressing the numerical buttons and decimal point to enter the needed value, and then press to save the changes, the cursor moves to the next line. When all three lines have be entered, the screen will move back to the previous menu level. If the value does not need to change, press previous menu level. The + and move the cursor. until the screen will move back to the buttons are in value state, pressing them will enter that value and will not 2

15 .0 AUTO PRO SETUP The parameters shown in the AUTOPRO SETUP menu below should only be changed by an experienced operator. Failure to do so may result in incorrect machine motions and possible machine damage. Linear Accl Linear Accel: unitmm / sec AUTOPRO SETUP Curve Accl G Code Read Setup Curve accel, mm/ second Read F Disp ERR Keep Zup Read T Hold On Hold On Disable Disable Disable Disable Disable Disable Process Time U Disk file list Inner file list 3

16 . AutoPro Setup Parameters.. Linear Acceleration Linear acceleration relates to line motion ability. It s default is 600mm / sec2. To change, input the value directly and press to save. If the auto process speed is less than 0 meters / minute, the acceleration is about mm / sec2. If the speed is is more than 0 meters / min., you should adjust the acceleration value. To return to the menu screen press...2 Curve acceleration Curve acceleration relates to curve motion ability. It s default value is 800mm / sec2. To change, input the value directly and press to save. If the auto process speed is less than 0 meters / minute, the acceleration is about mm / sec2. If the speed is is more than 0 meters / minute, you should adjust the acceleration value. To return to the menu screen press...3 G code Read Setup G Code Read Setup refers to the rules of reading G code file. Because there are many special data code. Press the + or to move the cursor to next line item. Entering the settings, the cursor is on Read F Disable line item. If the program needs to execute the F code in the file, then press or to change its property. Disable will change to Enable. Disable means to ignore the F code while Enable will execute the code. Display Error refers to display the wrong G code file, so that user can correct it. Z height refers to the raising of Z axis when it finishes working. Enable means that Z axis raises to the set height after it finishes all work. Disable means that Z axis raises as the file asks. Press the Press the to confirm the change. The display moves back to the previous menu. Y + 2 to cancel the change and move back to the previous. Y 6 4

17 6.0 SYSTEM SETUP The parameters shown in the SYSTEM SETUP menu below should only be changed by an experienced operator. Failure to do so may result in incorrect machine motions and possible machine damage. Languages Languages English Function Configuration Inner Format Formatting... 30% Input Self Check SYSTEM SETUP Output Self Check Buttons Check System Auto Update Choose file: U Disk file list Inner File List Button test +CAN exits _ KMDC Backup Data No such function! Restore Data No such function!

18 6. System Setup Parameters 6.. Languages The default language is English. The alternate choice is Chinese Function Configuration The Function Configuration feature is used to set system functions such as file format, I/O checking, button checking, and system update Inner Format Inner Format refers to formatting the internal flash memory. When you finish the system update, you must format the inner files. Move the cursor to Inner Format and press When formatting is complete press the button to go back to the previous menu Input Self Check Input Self Check refers to the system checks input terminal properties. 6.. Output Self Check Output Self Check refers to the system checks output terminal properties Buttons Check Buttons Check refers to checking the buttons on the hand held unit. Move the cursor to the line. labeled Buttons Check and press. Press each button on the hand held unit and the corresponding button should highlight on the screen. To exit back to the previous screen press compound buttons System Auto Update System Auto Update allows the user to update the hand held unit by first downloading the files from the website Copy the files to a USB smartdrive and plug into the hand held unit. Move the cursor to System Auto Update and press shown. Choose file: U Disk file list Inner File List to display the screen 6

19 Choose the U Disk file list, and press the downloaded update file and press screen. Move the cursor to read all the information, then press display the following: to display all files on the disk. Move the cursor to to start. The update information apears on the to operate next and program, please wait.. 40% program, please wait.. 40% menu, please wait... 40% menu, please wait... 40% label, please wait... 40% label, please wait... 40% to continue... Then press to confirm updating. 7

20 7.0 ADVANCED PRO SETUP The parameters shown in the ADVANCED PRO SETUP menu below should only be changed by an experienced operator. Failure to do so may result in incorrect machine motions and possible machine damage. Row ( s ) : 2 Column : 2 Multiple Setup Row Column RowSpace Column Pause Time RowSpace 0.00 ColSpace 0.00 ADVANCED PRO SETUP File Maintenance View File Copy File Delete File Multiple Internal time, second 0 Choose file: Inner file list U Disk file list Please select the file that needs to be copied, any button to continue. Inner file : Password Setup (Does not support this function) Class I Password Class I I Password Menu Password Super Password 8

21 7. Advanced Pro System Parameters 7.. Multiple Setup If you need to run a file multiple times, there are two ways. The first way is to copy all files and save them as one file in G-code making software. Then download it to the handheld controller. The other way is to take a single file and set the multiple function parameters for it. With the Multiple Setup line highlighted, press press to highlight the Row Column line and. With the cursor on the Row(s) line, input the new value directly. The cursor will move to the column setting. Press to save the change and return to the previous menu. Press the button to move the cursor to RowSpace ColumnSpace. Press and enter or change a value on the RowSpace line. The cursor moves to the ColSpace line. Press to save the change or to return to the previous menu. Press Pause Time. Press directly and press necessary, press to move the cursor to to enter. (Pause time refers to the time between parts.) Input a value to save the change or go back to the previous menu. If no change is to quit and return to the previous menu File Maintenance U disk file list refers to those files on the USB memory stick. The hand held controller can run these files via the USB port. Inner file list refers to those files saved in the internal memory of the controller. File maintenance means to View, Copy, and Delete these files. Press the button and the View File line will be highlighted. Press Disk File list. To view these files press through them. Press to select a file. and use the + and to highlight the U buttons to scroll 9

22 The screen display shows the line number and the contents. Use the to navigate through the lines of code. Press to the last line of code. Press Y and to go to the first line of code and to quit and return to the previous menu. Y 6 buttons to go To Copy a file use the button to scroll down and highlight the Copy File line. Press to read the following note: Please select the file that needs to be copied, any button to continue. The U Disk file list will be highlighted. Press the through and select any file by pressing the button to list the files. Scroll button. The following note will appear: Please select target file, any button to continue. Scroll to a line that says No file and press file will be copied. To do a check, scroll up to the View File and press to select Inner file list. Your copied file should be listed. To Delete a file, follow the procedure below. Using the delete and press previous menu. Note: Once a file is deleted it can not be recovered. button scroll down to Delete File and press The screen will show File Deleted. Press 7..3 Password Setup The system does not support the password feature at this time.. The. Scroll to and press. Scroll to the file you want to to return to the 20

23 8.0 VERSION VIEW Initial Version RZNC D46/3/ L7 Model Number. 2 (zhb9) 3898 Base Version (specific format) Serial Number Normal Version RZNC D46/3/ L7 Model Number. 2 (zhb9) 3898 Base Version (specific format) Serial Number 9.0 PROCESS Process includes Manual Process, Auto Process, and Advanced Process. 9. Manual Process Manual process refers to controlling the machine by pressing buttons on the DSP hand held unit. Users can change manual speed and grid dimensions. After the machine goes home, the system will be in manual mode as shown MANL Y AOFF Z HIGH Continuous Manual process speed can be changed between High speed and Low speed by pressing the HIGH/LOW 0 button. To adjust the speed for the current setting press below:. The screen displays as Low spd, mm/min Highspd, mm/min Axis: Axis: Y Axis: OR Y Axis: Z Axis: Z Axis:

24 The cursor will be on the axis line and highlighted. Press the Input the new number and press press line. RUN/PAUSE DELETE to delete the last number. Use the RUN/PAUSE DELETE button to set the value. to save the new value. If the input number is not correct, + and buttons to scroll to a different Manual Process Modes: In order to meet various manual movement requirements there are three available modes: Step, Continuous, and Distance. Step mode always moves at a slow speed with a spacing of a grid per second. The Low Grid value will be set between (0.0mm to.0mm). This mode is suitable for precise placement of the head. Continuous mode allows the operator to move the head using the following buttons: Y + 2 Z + 3 Y 6 reaches the end of travel. Z 7 Its speed is determined by the current speed mode. +. The head will move until the button is released or until it Note: If the button is pressed for less than 0. second, and released at once, the head moves to and stops at the nearest step point automatically. When this moving mode ends, the head always stops at the step point.this mode is suitable for adjusting the position of the head. Distance mode allows the operator to press moving direction buttons Y 6 Z 7 and the head will move to that specific location according to current speed mode and set spaces. The moving is not influenced by the grid point and stops precisely at the set distance. From the manual start screen, press the highlighted. Press new value. RUN/PAUSE DELETE MODE + Y + 2 button until the Dist line is to set the value and enter the new distance. Press Z + 3 to save the 22

25 9.2 Auto Process Auto Process refers to running USB disk files and Inner files also called file process. Before running any file, the machine and system parameters should be set correctly. The Auto Process operating steps are as follows: 9.2. Set Working Origin When the controller is in manual state, move the 3 axes (2 axes on manual Z axis machines). to the proper starting position on the table where it will run the file. Then press to Z 0 establish a new, Y working origin. Press 8 to clear the Z axis working origin. (If the C.A.D. function has been applied you do not need to clear the Z origin.) Choose File After the origins have been set, press displays as shown: Using the + and RUN/PAUSE DELETE. The screen buttons, move the cursor and press to select where to get the file from. Only three files appear on the screen at any one time so use the same scroll Up/Down buttons as above. Press to select the target file and Process Parameter Settings to quit and return to the previous menu. After pressing the button, the controller needs to set the process parameters including: Process Speed, Travel Speed, Z Down Ratio, Process Speed Ratio, Speed Grad, Equivalent Pulses/mm for, Y & Z axes, and Z Up as displayed on the following page. To scroll use the RUN/PAUSE DELETE Note: Only four lines can be viewed at any one time. + and Y 0 4 buttons. To change the values in the first five lines, press the button to set the value, then enter the new number, and press Choose file: U Disk file list Inner File List to save the new 23

26 value. After all changes are made press to begin checking the G-code data. After checking the data, the router should start cutting the piece. The screen display is shown here: Proc Spd: (Process Speed) The speed at which the data file is read or processed. Trvl Spd: (Travel Speed) The speed at which the head moves on the & Y axes. ZDownRat: (Z Down Ratio) Controls the slow down movement of the Z axis It has a range of (0..0). This function is not operational on machines with a manual Z axis. Spd Rati: (Speed Ratio) It is used to reduce the process speed. The actual process speed is (process speed x Speed Ratio). Its range is (0..0). Spd Grad: N/A Proc Spd Trvl Spd ZDownRat.00 Spd Rati.00 Spd Grad Equival pulse/mm Axis: Y Axis Z Axis Z Up mm 0.00 Equival pulse/mm: (Equivalent pulse/mm) It displays 3 axes equivalent values which you can not change here. If you need to modify them, enter the menu. Z Up mm: (Z Up mm) It refers to the height that the Z axis can go up. If the Z axis height of a file is over this limit it will adopt this limit instead. This function is not operational on machines with a manual Z axis Process Adjust When the file is executing, press Y + 2 and Y 6 to change the speed ratio. Each press on Y 6 drops the ratio 0. until it is.0. The speed values change synchronically. Each press of the Y + 2 button raises the ratio 0. until it is.0. 24

27 9.2. Process Pause and Position Adjust RUN/PAUSE RUN/PAUSE While it is processing, press DELETE Pause. It asks Original?. Press position. Press to adjust the position of the three axes, then press DELETE to confirm your change. It then processes from the new to deny the change and it will process from the original position. to Process Stop and Stop Point Saving While it is processing, press pauses to save a stop point. to stop the processing. It If it needs to restart the process from the current position at a later date then you should save it. Pressing + will save the stop point as No.. It will display on the screen as shown: RUN Y AOFF Z Step Save Stop Pt? RUN Y AOFF Z Step Save Stop Pt? Press to save the setting. The 3 axes will go back to the home origin. If it needs to RUN/PAUSE + DELETE continue to process from Stop Point, press compound buttons +. It now starts processing from Stop Point. Follow the same operating steps for Stop Point 2, Stop Point 3, and so on. In order for the stop point process to work, the 3 axes must have been homed before saving the stop point Power Off Protection: The system will automatically protect the process data should the power suddenly be disrupted. When the power is restored, press PowerOff reboot?. Press to go back to the machine origin. Then it pauses at to continue to process unfinished work or to quit. 2

28 9.3 Advanced Process Advanced process is a function for special applications which includes: Segment Process, Multiple Process, Segment-Multiple Process, Auto Copy Process, Mill Table, and Tool Change. Press compound buttons RUN/PAUSE DELETE + HIGH/LOW 0 to display: Advanced Process Segment Process Multiple Process Mill Table Tools Change 9.3. Segment Process: This allows the user to select the beginning line or ending line of the file so that a portion of it can be processed. The operating steps are as follows: Press to enter setting. The U Disk file list will be highlighted. Select either the U Disk list or the Inner file list by scrolling to and pressing Scroll to the desired file using the Start line No. Press Press RUN/PAUSE DELETE + and to display the following screen:. buttons. Press to display line of the G-code.. The menu shows Switch to Line Input the line number you wish to start at and press code for the line you selected will appear on the screen. Press Press to display the following screen: The G- to display the Switch to line screen. Input Ending line No. the ending line number in the cursor. Press to confirm ending line number. Press Y to select the first line and 6 to select the last line. Then set the process parameters. Refer to the Auto Process section 9.2 of this manual. Y

29 9.3.2 Multiple Process: Use this function if you need to set multiple parameters in the menu. The steps are as follows: From the Advanced Process Menu use the Multiple Process. Press + and buttons to scroll to and highlight to enter setting. The U Disk file list will be highlighted. Select either the U Disk list or the Inner file list by scrolling to and pressing file using the + and buttons. Press Scroll to the desired to select the target file. Set the process parameters similar to the steps in the Auto Process section 9.2. Press MENU to view the multiple parameters, press MENU again to cancel the view. 27

30 0.0 RZNC - 00 Specifications Contents Processor File Memorizer Display Communication Terminals File Format Axes Help Function Languages Operating Interface Drive System Interpolation function Cutter Adjusting function Spindle Control Function System Data Inspect Function Processing Data Inspect Function Processing Position Adjusting Function Multi Working Coordinates Stop Point Reprocessing Function Copy Processing Function Data protection when power off Working Temperature Humidity Outer Voltage Consumptions Dimensions Specification 60M DSP 28M memorizer inside, it supports file with any size because of adopting mobile memorize technology LCD with 28 dot x 64 dot USB terminal and U Disk G code, PLT files (optional) 3 axes Useful help information and guide English, Chinese Buttons and Menu Drive Step Motors Linear, Curve Yes Yes Yes Yes Yes 9 Working Coordinates Yes Yes Yes 0 C to +70 C <90% No dew, No frost V 2 W 6. x 4.33 x.49 (6 x 0 x 38mm) 28

31 NOTES 29

32 BAILEIGH INDUSTRIAL, INC. 62 DUFEK DRIVE MANITOWOC, WI 4220 PHONE: FA: BAILEIGH INDUSTRIAL, INC. 4 S. CAMPUS AVENUE ONTARIO, CA 976 PHONE: FA: BAILEIGH INDUSTRIAL LTD. UNIT FULLWOOD CLOSE ALDERMANS GREEN INDUSTRIAL ESTATE COVENTRY, CV2 2SS UNITED KINGDOM PHONE: +44 (0) FA: +44 (0) BAILEIGH INDUSTRIAL GMBH HOFENER STRAßE FELLBACH DEUTCHSLAND 30