Table of Contents Parts Manual LC25 Lister-Cultivator Read the Operator's manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! 36582 Cover illustration may show optional equipment not supplied with standard unit. Copyright 2017 Printed 06/28/17 591-074P
Table of Contents Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Frame...6 Mainframe...6 Decals (S/N C1010 X -)...8 Lights (S/N C1010 X -)...10 Lights and Decals (S/N C1011X +)...12 Coulter...14 Barring Off Disk Assembly...14 Coulter Adjustment Assembly...16 Coulter Assembly...18 Furrowing Disk Assembly...20 Lister Support and Furrowing Disk Assembly...22 Lister-Cult Mount with Extension and Shank Mount...24 Spring/Plug Sub Assembly...26 Cultivator Shield Assembly...28 Coulter Wheel...30...32 Copyright 2017 All rights reserved Printed 06/28/17 Great Plains Manufacturing, Inc. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. Great Plains Manufacturing, Incorporated Trademarks The following are trademarks of Great Plains Mfg., Inc.: Application Systems, Ausherman, Land Pride, Great Plains All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 591-074P - 2-06/28/17
Table of Contents Alphabetized Table of Contents Selected Models B Barring Off Disk Assembly...14 C Coulter Adjustment Assembly...16 Coulter Assembly...18 Coulter Wheel...30 Cultivator Shield Assembly...28 D Decals (S/N C1010 X -)...8 F Furrowing Disk Assembly...20 L Lights (S/N C1010 X -)...10 Lights and Decals (S/N C1011X +)...12 Lister Support and Furrowing Disk Assembly...22 Lister-Cult Mount with Extension and Shank Mount...24 M Mainframe...6 S Spring/Plug Sub Assembly...26 06/28/17-3 - 591-074P
Table of Contents 591-074P - 4-06/28/17
Table of Contents 06/28/17-5 - 591-074P
Mainframe Table of Contents 36526 591-074P - 6-06/28/17
Mainframe Table of Contents Frame Ref. Part No. Part Description Comments Revision 1. 1. 2. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. dwg36526 591-078H 591-084H 591-002H 591-085H 591-059H 591-033H 591-133D 591-006H 805-081C 802-164C 804-023C 805-119C 805-291C 806-052C 803-021C 804-022C 806-154C 803-181C 806-050C 591-032H 591-058H 802-469C 403-414H 804-093C 818-055C 802-301C 804-007C 804-006C 803-006C 805-065C 591-057H 805-518C 805-167C 802-086C 803-027C 591-031H Image No. 9 ROW LISTER/CULT FRAME 9 ROW LISTER/CULT FRAME 30 CAT 4-4N BOLT ON HITCH CAT 4-4N BOLT ON HITCH 8 ROW CAT 3N-4W REAR HITCH CLAMP WLD LIGHT BRACKET MOUNT WELDMENT ADJUSTMENT HANDLE HOLDER STACK FOLD PARKING STAND PIN HTCH.75X4.25 USBL W/PIN HHCS 3/4-10X9 GR5 WASHER LOCK SPRING 3/4 PLT PIN HTCH 1.25X4.50 USBL PIN CLVS 1.75X4.38 USBL U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT U-BOLT 3/4-10 X 4 1/32 X 7 1/2 NUT HEX FLANGE LOCK 3/4-10 PLT U-BOLT 3/4-10 X 7 X 8 1/2 PIN HITCH 2 X 12 7/8 PLT CAT 4N LOWER HITCH PIN SPACER HHCS 3/4-10X8 GR5 PLT CALIBRATION CRANK WASHER FLAT 3/4 HARD ASTMF436 DECAL SLOW MOVING-GALV. BACKED HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT PIN WIRE RETAINING 1/4 X 1 3/4 CAT 3 HITCH PIN SUPPORT SPACER PIN HTCH 1.44X8.88 USBL PIN HAIR COTTER.243 WIRE PLT HHCS 3/4-10X2 3/4 GR5 NUT HEX 3/4-10 PLT CAT 3 WIDE BUSHING WELDMENT Wide Frame Narrow Frame (not shown) (Not Shown) 06/28/17-7 - 591-074P
Table of Contents Decals (S/N C1010 X -) 36577 591-074P - 8-06/28/17
Table of Contents Frame Decals (S/N C1010 X -) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. dwg36577 858-234C 838-265C 838-267C 838-266C 848-911C 818-590C 818-587C 818-557C 818-188C Image No. DECAL LC25 DECAL REFLECTOR AMBER 1 1/2X9 DECAL REFLECTR DAYTIME 1 1/2X9 DECAL REFLECTOR RED 1 1/2X9 DECAL GP&LOGO HARVEST/3X20 STR DECAL DANGER CRUSH TRCTR & 3PT DECAL CAUTION OPERATIONAL MACH DECAL DANGER CANNOT READ ENG DECAL WARNING 20 MPH TRANS LRG 06/28/17-9 - 591-074P
Table of Contents Lights (S/N C1010 X -) 36570 591-074P - 10-06/28/17
Table of Contents Frame Lights (S/N C1010 X -) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. dwg36570 591-078H 833-676C 833-694C 591-033H 591-130D 802-167C 803-088C 833-697C 803-255C 806-147C 802-099C 806-052C 803-021C 804-022C 803-169C 833-675C 591-131D 833-696C Image No. 9 ROW LISTER/CULT FRAME LIGHT HARNESS 18' WISHBONE LED LIGHT HRNSS ENHANCE MODULE LED LIGHT BRACKET MOUNT WELDMENT LIGHT BRACKET MOUNT TUBE RH HHCS 1/4-20X1 1/2 GR5 NUT HEX LOCK 1/4-20 FLG LIGHT, AMBER LAMP LED NUT HEX NYLOCK 1/4-20 U-BOLT 1/4-20 X 2 9/32 X 3 GR2 HHCS 1/2-13X3 1/4 GR5 U-BOLT 5/8-11 X 7 1/32 X 8 1/2 NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT NUT HEX FLG LOCK 1/2-13 PLT LIGHT HARNESS, 7' LEAD - LED LIGHT BRACKET MOUNT TUBE LH LIGHT, RED LAMP - LED 06/28/17-11 - 591-074P
Table of Contents Lights and Decals (S/N C1011X +) 68395 591-074P - 12-06/28/17
Table of Contents Frame Lights and Decals (S/N C1011X +) Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. dwg68395 591-130D 591-131D 591-033H 806-052C 804-022C 803-021C 802-099C 803-169C 833-675C 833-999C 802-167C 803-088C 818-055C 802-301C 804-007C 804-006C 803-006C 591-221D 591-222D 806-268C 804-009C 803-008C 838-266C 838-267C 838-265C 833-697C 806-147C 803-255C 858-234C 848-911C 833-696C 818-188C 891-836C 833-694C Image No. LIGHT BRACKET MOUNT TUBE RH LIGHT BRACKET MOUNT TUBE LH LIGHT BRACKET MOUNT WELDMENT U-BOLT 5/8-11 X 7 1/32 X 8 1/2 WASHER LOCK SPRING 5/8 PLT NUT HEX 5/8-11 PLT HHCS 1/2-13X3 1/4 GR5 NUT HEX FLG LOCK 1/2-13 PLT LIGHT HARNESS, 7' LEAD - LED LIGHT HARNESS WISHBONE LED HHCS 1/4-20X1 1/2 GR5 NUT HEX LOCK 1/4-20 FLG DECAL SLOW MOVING-GALV. BACKED HHCS 1/4-20X1/2 GR5 WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 1/4 PLT NUT HEX 1/4-20 PLT DECAL MOUNT DECAL MOUNT U-BOLT 5/16-18X2 1/32X2 11/16 WASHER LOCK SPRING 5/16 PLT NUT HEX 5/16-18 PLT DECAL REFLECTOR RED 2X9 DECAL REFLECTOR DAYTIME 2X9 DECAL REFLECTOR AMBER 2X9 LIGHT, AMBER LAMP LED U-BOLT 1/4-20 X 2 9/32 X 3 GR2 NUT HEX NYLOCK 1/4-20 DECAL LC25 DECAL GP&LOGO HARVEST/3X20 STR LIGHT, RED LAMP - LED DECAL WARNING 20 MPH TRANS LRG ADHESIVE BACK CORD CLIP LIGHT HRNSS ENHANCE MODULE LED 06/28/17-13 - 591-074P
Table of Contents Barring Off Disk Assembly 34927 591-074P - 14-06/28/17
Table of Contents Coulter Barring Off Disk Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. dwg34927 591-026S 591-107D 591-110D 591-136D 802-015C 803-013C 803-181C 820-473C 842-074C 891-219C 805-197C 805-032C 802-088C 591-028H 803-263C 591-113D 822-215C 800-407C 591-104D Image No. BARRING OFF DISK HUB-BRG ASY 10 GA SPINDLE WASHER BARRING OFF DISK MOUNTING BAR BEARING SPACER TUBE. RHSNB 3/8-16X1 GR5 NUT LOCK 3/8-16 PLT NUT HEX FLANGE LOCK 3/4-10 PLT DISC 13.75X1 CONC 6 BOLT RHSNB 3/4-10X4 GR5 EC STYLE END CAP PIN BENT.63X3.09 USBL PIN HAIR COTTER.148 WIRE RHSNB 5/8-11X2 GR5 BARRING DISK MOUNT TB WELDMENT NUT HEX FLANGE LOCK 5/8-11 PLT BARRING DISC CLAMP CHANNEL BRG BALL 1.18IDX2.44OD 5206KPP 62MM SNAP RING BARRING OFF DISK HUB MACHINED Contains items 17,18,19 06/28/17-15 - 591-074P
Table of Contents Coulter Adjustment Assembly 34946 591-074P - 16-06/28/17
Table of Contents Coulter Coulter Adjustment Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. dwg34946 591-018H 591-019H 591-020H 591-111D 800-001C 805-072C Image No. COULTER ADJUSTMENT TUBE WELDMT COULTER ADJ UPPER PIVOT WELDMT COULTER ADJ THREADED ROD ADJUSTMENT SCREW UPPER COLLAR GREASE ZERK STRAIGHT 1/4-28 PIN ROLL 3/8 X 1 1/2 06/28/17-17 - 591-074P
Coulter Assembly Table of Contents 34912 591-074P - 18-06/28/17
Table of Contents Coulter Coulter Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. dwg34912 591-010H 591-011S 591-062D 591-064D 591-134D 802-109C 802-128C 802-282C 803-008C 803-169C 803-263C 804-009C 204-396D 591-093D 804-084C 820-522C 802-397C 803-181C 591-063D 188-001V Image No. COULTER ARM WELDMENT COULTER HUB ASSEMBLY 1 1/8OD X 11/16ID X 5/8L TB COULTER SCRAPER 15 X 3.75 DEPTH BAND PAINTED HHCS 5/8-11X10 GR5 HHCS 1/2-13X2 GR5 RHSNB 5/16-18X1 GR5 NUT HEX 5/16-18 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX FLANGE 5/8-11 PLT WASHER LOCK SPRING 5/16 PLT 4BLT 5BC STRADLE CLTR HUB MACH COULTER ARM INNER PIVOT TUBE WASHER FLAT 5/16 HARD ASTMF436 22 IN 4 BLT FLAT BLADE COULTER HHCS 3/4-10X10 1/2 GR5 NUT HEX FLANGE LOCK 3/4-10 PLT BEARING SPACER TUBE BRG AA205DD Contains 13 & 19-20 06/28/17-19 - 591-074P
Table of Contents Furrowing Disk Assembly 34954 591-074P - 20-06/28/17
Table of Contents Coulter Furrowing Disk Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. dwg34954 591-024S 591-105D 591-106D 591-136D 802-015C 802-386C 803-013C 803-181C 820-473C Image No. FURROWER DISK HUB-BEARING ASY HUB DUST COVER PLATE 5/16 SPINDLE WASHER BEARING SPACER TUBE. RHSNB 3/8-16X1 GR5 RHSNB 3/4-10X3 1/2 GR5 NUT LOCK 3/8-16 PLT NUT HEX FLANGE LOCK 3/4-10 PLT DISC 13.75X1 CONC 6 BOLT 06/28/17-21 - 591-074P
Table of Contents Lister Support and Furrowing Disk Assembly 34919 591-074P - 22-06/28/17
Table of Contents Coulter Lister Support and Furrowing Disk Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. dwg34919 591-021H 591-108D 591-109D 591-147D 802-091C 802-130C 802-155C 802-213C 802-355C 803-015C 803-019C 803-020C 803-086C 804-014C 804-015C 804-087C 820-523C 591-022H 591-023H 591-025K 591-102D 802-106C 804-113C 591-146D 591-145D 803-169C Image No. LISTER SUPPORT WELDMENT LISTER STAINLESS V DEFLECTOR 1 X 3 LISTER/CULTIVATOR SHANK LISTER WEAR SHIN HHCS 1/2-13X1 1/2 GR5 HHCS 1/2-13X2 1/2 GR5 RHSNB 3/8-16X1 1/4 GR5 RHSNB 7/16-14X3 GR5 PLOW 7/16-14X2 1/4 GR5 NUT HEX 7/16-14 PLT NUT LOCK 1/2-13 PLT NUT HEX 1/2-13 PLT NUT MAC-LOK FLG 3/8-16 GR F WASHER LOCK 7/16 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 3/8 HARD ASTMF436 11 W LISTER SHOVEL FURROWER DISK ANCHOR WELDMT FURROWER DISK MOUNT WELDMENT FURROWING DISK ASSEMBLY DISK ANGLE ADJUSTMENT CHANNEL RHSNB 1/2-13X1 1/2 GR5 WASHER FLAT 1/2 USS HARD PLT 11W LISTER HALF SHOVEL LH 11W LISTER HALF SHOVEL RH NUT HEX FLG LOCK 1/2-13 PLT Breakdown on Furrowing Disk Assembly page 06/28/17-23 - 591-074P
Table of Contents Lister-Cult Mount with Extension and Shank Mount 34914 591-074P - 24-06/28/17
Table of Contents Coulter Lister-Cult Mount with Extension and Shank Mount Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. dwg34914 552-050V 591-013H 591-014H 591-015H 591-016H 591-090D 591-091D 591-092D 800-001C 800-177C 801-059C 802-397C 802-424C 803-020C 803-027C 803-181C 804-016C 804-023C 804-094C 805-019C 805-235C 806-050C 591-030H 802-034C 802-091C 804-015C 804-113C 591-017H 591-039K 805-348C 591-135D 805-108C 804-025C 591-132D 802-162C 803-024C 890-771C 802-720C 802-729C 802-331C 803-200C 803-263C 591-094D Image No. SPRING/PLUG SUB ASSY LISTER-CULT MOUNT WELDMENT UPPER PARALLEL ARM WELDMENT LOWER PARALLEL ARM WELDMENT LISTER-CULTIVATOR SHANK WELDMT UPPER ARM SPRING TRUNNION ROD SPRING ANCHOR SPACER TUBE PARALLEL ARM INNER PIVOT TUBE GREASE ZERK STRAIGHT 1/4-28 SNAP RING EXT 1 1/4 HEAVY SCREW SQ HD 5/8-11X3 1/2 GR5 HHCS 3/4-10X10 1/2 GR5 HHCS 1/2-13X4 FTHD NUT HEX 1/2-13 PLT NUT HEX 3/4-10 PLT NUT HEX FLANGE LOCK 3/4-10 PLT WASHER FLAT 1/2 SAE PLT WASHER LOCK SPRING 3/4 PLT WASHER FLAT 1/2 HARD ASTMF436 PIN COTTER 5/32 X 1 PLT PIN CLVS.50X4.77 USBL U-BOLT 3/4-10 X 7 X 8 1/2 CULTIVATOR EXTENSION WELDMENT HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X1 1/2 GR5 WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 USS HARD PLT SHANK MOUNT WELDMENT COULTER ADJUSTMENT ASSEMBLY PIN WIRE RETAIN 3/8 X 1 3/4 DEPTH GAUGING BAR PIN CLVS.50X3.27 USBL WASHER FLAT 3/4 SAE PLT BARRING DISC PLUG PLATE HHCS 5/8-11X3 1/2 GR5 NUT LOCK 5/8-11 PLT BUSHING 1.25ODX1.00IDX2.00 HHCS 7/16-14X3 1/2 GR5 PLT HFS 5/8-11X2 1/2 GR8 PLT RHSNB 1/2-13X1 3/4 GR5 NUT HEX LOCK 7/16-14 PLT NUT HEX FLANGE LOCK 5/8-11 PLT COULTER ADJ UPPER PIVOT TUBE Breakdown on Spring/plug sub assembly page Breakdown on Coulter Adjustment Assembly 06/28/17-25 - 591-074P
Table of Contents Spring/Plug Sub Assembly 34947 591-074P - 26-06/28/17
Table of Contents Coulter Spring/Plug Sub Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. dwg34947 812-148C 807-267C 552-014D Image No. BOTTOM SPRING PLUG SPRING EXT 2.25 OD.374 9.75L SPRING PLUG, TOP, LIGHT DUTY 06/28/17-27 - 591-074P
Table of Contents Cultivator Shield Assembly 36606 591-074P - 28-06/28/17
Table of Contents Coulter Cultivator Shield Assembly Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. dwg36606 591-079H 591-080H 591-081H 591-082H 591-083H 591-166D 591-177D 800-041C 802-017C 802-145C 803-013C 803-014C 804-013C 804-025C 805-045C 806-267C 800-001C Image No. SHIELD MOUNT BRKT WELD CULTIVATOR SHIELD WELD SHIELD SWING ARM WELD SHIELD MOUNT TUBE WELD SHIELD MNT CROSS TUBE WELD SHIELD MOUNT CHANNEL SHIELD MOUNT CHAIN S-HOOK #772.177 X 1 1/8 PLT HHCS 3/8-16X1 GR5 RHSNB 3/8-16X2 1/2 GR5 NUT LOCK 3/8-16 PLT NUT HEX 3/8-16 PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 3/4 SAE PLT PIN COTTER 5/32 X 1 1/4 LG U-BOLT 3/8-16X1 9/32X2 GREASE ZERK STRAIGHT 1/4-28 06/28/17-29 - 591-074P
Coulter Wheel Table of Contents 36604 591-074P - 30-06/28/17
Coulter Wheel Table of Contents Coulter Ref. Part No. Part Description Comments Revision 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. dwg36604 814-254C 814-559C 802-845C 814-210C 591-159D 591-063D 188-001V 591-062D 803-021C 804-022C 591-010H 802-109C 591-093D 805-108C 805-019C 802-397C 803-181C Image No. TIRE 20.5 X 8.0-10 LRE WHL10X6X.18OF 5BLT5.5BC4P BKSN BOLT WHL 9/16-18X1 1/8 GR5 VALVE STEM METAL TR-575 TUBLES 5 BLT 5.5 BC 4P STRADDLE HUB BEARING SPACER TUBE BRG AA205DD 1 1/8OD X 11/16ID X 5/8L TB NUT HEX 5/8-11 PLT WASHER LOCK SPRING 5/8 PLT COULTER ARM WELDMENT HHCS 5/8-11X10 GR5 COULTER ARM INNER PIVOT TUBE PIN CLVS.50X3.27 USBL PIN COTTER 5/32 X 1 PLT HHCS 3/4-10X10 1/2 GR5 NUT HEX FLANGE LOCK 3/4-10 PLT 06/28/17-31 - 591-074P
Table of Contents The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page 188-001V...19, 31 204-396D...19 403-414H...7 552-014D...27 552-050V...25 591-002H...7 591-006H...7 591-010H...19, 31 591-011S...19 591-013H...25 591-014H...25 591-015H...25 591-016H...25 591-017H...25 591-018H...17 591-019H...17 591-020H...17 591-021H...23 591-022H...23 591-023H...23 591-024S...21 591-025K...23 591-026S...15 591-028H...15 591-030H...25 591-031H...7 591-032H...7 591-033H...7, 11, 13 591-039K...25 591-057H...7 591-058H...7 591-059H...7 591-062D...19, 31 591-063D...19, 31 591-064D...19 591-078H...7, 11 591-079H...29 591-080H...29 591-081H...29 591-082H...29 591-083H...29 591-084H...7 591-085H...7 591-090D...25 591-091D...25 591-092D...25 591-093D...19, 31 591-094D...25 591-102D...23 591-104D...15 591-105D...21 591-106D...21 591-107D...15 591-108D...23 591-109D...23 591-110D...15 591-111D...17 591-113D...15 591-130D...11, 13 591-131D...11, 13 591-132D...25 591-133D...7 591-134D...19 591-135D...25 591-136D...15, 21 591-145D...23 591-146D...23 591-147D...23 591-159D...31 591-166D...29 591-177D...29 591-221D...13 591-222D...13 800-001C...17, 25, 29 800-041C...29 800-177C...25 800-407C...15 801-059C...25 802-015C...15, 21 802-017C...29 802-034C...25 802-086C...7 802-088C...15 802-091C...23, 25 802-099C...11, 13 802-106C...23 802-109C...19, 31 802-128C...19 802-130C...23 802-145C...29 802-155C...23 802-162C...25 802-164C...7 802-167C...11, 13 802-213C...23 802-282C...19 802-301C...7, 13 802-331C...25 802-355C...23 802-386C...21 802-397C...19, 25, 31 802-424C...25 802-469C...7 802-720C...25 802-729C...25 802-845C...31 803-006C...7, 13 803-008C...13, 19 803-013C...15, 21, 29 803-014C...29 803-015C...23 803-019C...23 803-020C...23, 25 803-021C...7, 11, 13, 31 803-024C...25 803-027C...7, 25 803-086C...23 803-088C...11, 13 803-169C...11, 13, 19, 23 803-181C... 7, 15, 19, 21, 25, 31 803-200C...25 803-255C...11, 13 803-263C...15, 19, 25 804-006C...7, 13 804-007C...7, 13 804-009C...13, 19 804-013C...29 804-014C...23 804-015C...23, 25 804-016C...25 804-022C...7, 11, 13, 31 804-023C...7, 25 804-025C...25, 29 804-084C...19 804-087C...23 804-093C...7 804-094C...25 804-113C...23, 25 805-019C...25, 31 805-032C...15 805-045C...29 805-065C...7 805-072C...17 805-081C...7 805-108C...25, 31 805-119C...7 805-167C...7 805-197C...15 805-235C...25 805-291C...7 805-348C...25 805-518C...7 806-050C...7, 25 806-052C...7, 11, 13 806-147C...11, 13 806-154C...7 806-267C...29 806-268C...13 807-267C...27 812-148C...27 814-210C...31 814-254C...31 814-559C...31 818-055C...7, 13 818-188C...9, 13 818-557C...9 818-587C...9 818-590C...9 820-473C...15, 21 820-522C...19 820-523C...23 822-215C...15 833-675C...11, 13 833-676C...11 833-694C...11, 13 833-696C...11, 13 833-697C...11, 13 833-999C...13 838-265C...9, 13 838-266C...9, 13 838-267C...9, 13 842-074C...15 848-911C...9, 13 858-234C...9, 13 890-771C...25 891-219C...15 891-836C...13 dwg34912...19 dwg34914...25 dwg34919...23 dwg34927...15 dwg34946...17 dwg34947...27 dwg34954...21 dwg36526...7 dwg36570...11 dwg36577...9 dwg36604...31 dwg36606...29 dwg68395...13 591-074P - 32-06/28/17
Table of Contents This Page Intentionally Left Blank 06/28/17-33 - 591-074P
Great Plains Mfg., Inc. 1525 E. North Street Salina, Kansas 67401 USA www.greatplainsmfg.com