SERVICE PARTS MANUAL V-BOX SPREADER POLY DUAL ELECTRIC MODEL PDE00 - / CUBIC YARD MODEL PDE00 - / CUBIC YARD MODEL PDE800 - CUBIC YARD SPREADERS WITH SERIAL NUMBERS AFTER: PDE0000, PDE0000, 8PDE0000 CHUTES WITH SERIAL NUMBERS AFTER: PDELC00000, PDESC00000 0 Sno-Way International 90880F
TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... Hopper... Inverted V - PDE00 ( Piece Design)... Inverted V - PDE00 (Sectional Design)... Inverted V - PDE00 ( Piece Design)... Inverted V - PDE00 (Sectional Design)... 8 Inverted V - PDE800 ( Piece Design)... 9 Inverted V - PDE800 (Sectional Design)... 0 Hopper Screen - PDE00... Hopper Screen - PDE00... Hopper Screen - PDE800... Auger Drive... Chute and Spinner... 9 Decals - PDE00 & PDE00... Decals - PDE800... Accessories... Numerical Index... NOTE: For CONTROLLER SYSTEM WIRING - See Manual 909 - Snow Plow and Spreader Controls for parts breakdowns and details,
PARTS LIST INTRODUCTION Our dealership network stands by to provide you with any assistance you may require, including genuine Sno-Way service parts. All parts should be obtained from or ordered through your dealer. Give complete information about the part(s) at time of order, and include the Model and applicable Serial Numbers of your machine. NOTE: The Model and all Serial number information should be recorded on page two of your Installation and Owner s Manual for ease of reference. The location of these numbers on the machine is detailed in the manual as well. "Right" and "Left" are determined from a position sitting on the Operators seat of the vehicle. We reserve the right to make changes or improvements in the design or construction of any part without incurring the obligation to install such changes in any unit previously delivered. USING THIS PARTS LIST A sample parts listing is shown below: The "ITEM" in column one is the number used in the corresponding illustration. The "PART NO." in column two is the number used to order replacement parts. If a number does not appear in the column the part is only available by ordering the complete assembly. The "DESCRIPTION" in column three is the name of the replacement part. At times the name may be indented, this means that the indented parts are part of the preceding assembly. The "QTY." in column four is the quantity needed to service the assembly illustrated, not the complete product. ITEM PART NO. DESCRIPTION QTY. 90008 O-ring 9009 Elbow 98000 Capscrew, Hex.,/8"-NC x /8" 9 PART DESCRIPTION ABBREVIATIONS Our Part Descriptions use common industry standard abbreviations in the naming conventions for many individual items. The list below details the abbreviations commonly used throughout this manual. If a specific abbreviation is not listed, contact any Sno-Way Dealer for clarification. ABBREV. DESCRIPTION ABBREV. DESCRIPTION BRKT BRACKET HW HARD WIRED CB CARRIAGE BOLT HWH HEX WASHER HEAD CLP CLEVIS PIN LN LOCK NUT COTP COTTER PIN LW HELICAL LOCK WASHER DP DOWN PRESSURE PS PASSENGER SIDE DS DRIVER SIDE PW PLAIN FLAT WASHER EB EYE BOLT SHCS SOCKET HEAD CAP SCREW GR GRADE SLT SLOTTED HDWE HARDWARE SS STAINLESS STEEL HHCS HEX HEAD CAP SCREW ST SELF-THREADING HN HEX NUT UB U-BOLT HNILN HEX NYLON INSERT LOCKNUT WL WIRELESS
HOPPER SEE INVERTED V ON PAGES -0 PDE00 & PDE00 ONLY SEE AUGER WITH DRIVE MOTOR ON PAGE 8 9 9 0 8 0 0
HOPPER ITEM PART NO. DESCRIPTION QTY Hopper... Baffle, Straight (PDE00 & PDE00 Only)... Baffle, Angle... 9800 PW, /8", SS PDE00/00...8 PDE800... 98009 LN, /8"-, SS PDE00/00...0 PDE800)... CB, /8"- x." PDE00/00... PDE800...0 Weldment, Auger Support... 8 990 Vibrator, 00 lb/s... 9 9800 HHCS, /8"- x -/", SS... 0 90 Kit, Latch Pin (Includes qty each; Items,,,, )... Latch Pin, Chute... Spring, Latch Pin... Bushing, Spacer... PW,." O.D. x 0." I.D. x /8"... Spring Pin, /" x "... HHCS, /"-0 x /", SS... 98009 LW, /", SS... 8 9800 PW, /", SS... 9 9 Cover, Auger Drive (For controls like image b)... 9 Cover, Auger Drive (For controls like image a )... 0 Bracket, Receiver Mount, PDE... 90 Bolt Plate... LN, /"-0, SS... NOTE: PDE800 Shown. See notes in descriptions for specific spreader series. a) b)
INVERTED V - PDE00 ( PIECE DESIGN) ITEM PART NO. DESCRIPTION QTY 99 Baffle Bracket... 9800 PW, /8" SS... 98009 LN, /8"-, SS... 9 Plate, Inverted V Cover... 9 Inverted V... 9800 CB, /8"- x."...
INVERTED V - PDE00 (SECTIONAL DESIGN) 8 9 ITEM PART NO. DESCRIPTION QTY 9 Bracket, Inverted V, Top... 9800 PW, /8" SS... 0 98009 LN, /8"-, SS... 8 9 Plate, Inverted V, End... 90 Plate, Inverted V, Center... 9 Bracket, Inverted V, End... 99 Bracket, Inverted V, Center... 8 9800 CB, /8"- x.", SS... 8 9 98009 CB, /8"- x.00", SS... 0
INVERTED V - PDE00 ( PIECE DESIGN) ITEM PART NO. DESCRIPTION QTY 99 Baffle Bracket... 9800 PW, /8" SS... 98009 LN, /8"-, SS... 98 Plate, Inverted V Cover... 99 Inverted V... 9800 CB, /8"- x."...
INVERTED V - PDE00 (SECTIONAL DESIGN) 8 9 ITEM PART NO. DESCRIPTION QTY 9 Bracket, Inverted V, Top... 9800 PW, /8" SS... 98009 LN, /8"-, SS... 0 9 Plate, Inverted V, End... 9 Plate, Inverted V, Center... 9 Bracket, Inverted V, End... 90 Bracket, Inverted V, Center... 8 9800 CB, /8"- x.", SS... 8 9 98009 CB, /8"- x.00", SS... 8
INVERTED V - PDE800 ( PIECE DESIGN) ITEM PART NO. DESCRIPTION QTY 99 Baffle Bracket... 9800 PW, /8" SS... 8 98009 LN, /8"-, SS... 8 99 Plate, Inverted V Cover... 998 Inverted V... 9800 CB, /8"- x."... 8 9
INVERTED V - PDE800 (SECTIONAL DESIGN) 8 9 ITEM PART NO. DESCRIPTION QTY 9 Bracket, Inverted V, Top... 9800 PW, /8" SS... 98009 LN, /8"-, SS... 9 Plate, Inverted V, End... 98 Plate, Inverted V, Center... 9 Bracket, Inverted V, End... 9 Bracket, Inverted V, Center... 8 9800 CB, /8"- x.", SS...0 9 98009 CB, /8"- x.00", SS... 0
HOPPER SCREEN - PDE00 8
HOPPER SCREEN - PDE00 ITEM PART NO. DESCRIPTION QTY 98009 LN, /8"-, SS... 9800 PW, /8", SS... 90 Bracket, Strap... 9800 Washer, Retainer...8 9800 CB, /8"- x.", SS...8 9 Grate, Top Screen, PDE00... 9 Grate Support, PDE00... 8 9800 CB, /8"- x.", SS...
HOPPER SCREEN - PDE00 8 9 9
HOPPER SCREEN - PDE00 ITEM PART NO. DESCRIPTION QTY 98009 LN, /8"-, SS... 9800 PW, /8", SS... 90 Bracket, Strap... 9800 Washer, Retainer...8 9800 CB, /8"- x.", SS...9 90 Isolator, Screen... 9 Grate, Top Screen, PDE00... 8 9 Grate Support, PDE00... 9 9800 CB, /8"- x.", SS...
HOPPER SCREEN - PDE800 8 9 9
HOPPER SCREEN - PDE800 ITEM PART NO. DESCRIPTION QTY 98009 LN, /8"-, SS... 9800 PW, /8", SS... 90 Bracket, Strap... 9800 Washer, Retainer...0 9800 CB, /8"- x.", SS...0 90 Isolator, Screen... 98 Grate, Top Screen, PDE800... 8 98 Grate Support, PDE800... 9 9800 CB, /8"- x.", SS...
AUGER DRIVE 9 0 8 0
AUGER DRIVE ITEM PART NO. DESCRIPTION QTY 980 Motor, Auger Drive... 9800 PW, /", SS... 9800 LW, /", SS... 9800 HHCS, /"-0 x /", SS... 9800 HHCS, /"-8 x.", SS... 98008 LN, /"-8, SS... 98009 LN, /8"-, SS...8 8 900 Seal, Main Auger... 9 90 Weldment, Bearing Plate... 0 9800 HHCS, /8"- x /8", SS... 99 Bearing, Auger... 9800 PW, /8", SS... 9800 HHCS, /8"- x.0", SS... 98 Weldment, Auger, PDE00... 9 Weldment, Auger, PDE00... 9 Weldment, Auger, PDE800... NOTE: PDE800 Shown 8
CHUTE AND SPINNER 8 8 8 0 9 9 0 9
CHUTE AND SPINNER ITEM PART NO. DESCRIPTION QTY 988 Bracket, Handle Chute... 9800 CB, /8"- x -/", SS...9 908 Clamp, Cable... 9800 HHCS, /8"- x -/", SS... 990 Baffle, Internal Chute... 9800 PW, /8", SS...0 98009 LN, /8", SS...0 8 99 Chute, Short, -/8"... 980 Chute, Long, 8-/"... 9 99 Bracket, Shield Mount... 0 99 Shield Spinner... 90 Spinner, " Poly... 98008 LN, /", SS... 98008 HHCS, /"-8 x -/", SS... 9800 HHCS, /"-8 x ", SS... 98009 LW, /", SS... 9808 Plate, Spinner Support... 9008 Seal, Shaft... 8 980 Motor, Gear Drive Spinner... 9 980088 HWHST, #0- x ", SS... 0 99 Cover, Spinner Chute... 0
DECALS - PDE00 & PDE00 9 PDE00 8 0 9 PDE00 0 8
DECALS - PDE00 & PDE00 ITEM PART NO. DESCRIPTION QTY. Decal, Warning, Keep Hands and Feet... Decal, Warning, Do Not Ride... Decal, Warning, Do Not Exceed GVWR... Decal, Sno-Way... Decal, Important, Material... Decal, Warning, Do Not Enter Hopper... Decal, Warning, Rotation & Pinch Point... 8 Decal, Warning, Shut Off... 9 Decal, Warning, Keep All Guards... 0 Decal, Warning, Flying Debris... Decal, Reflective... Decal, PDE00... Decal, PDE00... 90 Decal Kit, PDE00 (Not Shown)... 908 Decal Kit, PDE00 (Not Shown)...
DECALS - PDE800 8 9 0
DECALS DECALS - PDE800 ITEM PART NO. DESCRIPTION QTY. Decal, Warning, Keep Hands & Feet... Decal, Warning, Do Not Ride... Decal, Warning, Do Not Exceed GVWR... Decal, Sno-Way... Decal, Important, Material... Decal, Warning, Do Not Enter Hopper... Decal, Warning, Rotation & Pinch Point... 8 Decal, Warning, Shut Off... 9 Decal, Warning, Keep All Guards... 0 Decal, Warning, Flying Debris... Decal, Reflective, Rear... Decal, PDE800... Decal, Reflective Yellow, DS... Decal, Reflective Yellow, PS... 9 Decal Kit, PDE800 (Not Shown)...
ACCESSORIES ITEM PART NO. DESCRIPTION QTY 990 Tarp Kit, PDE00... 9908 Tarp Kit, PDE00... 990 Tarp Kit, PDE800... Tarp... Aluminum Extrusion... 9 Shock Cord, Rubber PDE00/PDE00... PDE800... Screw, Self Tapping... 90 Auger Relief Tool Kit... 990000 Kit, Ratchet Strap (Includes Ratchet Straps)...
NUMERICAL INDEX PART NO. PAGE ITEM PART NO. PAGE ITEM PART NO. PAGE ITEM 908 0 90 0 99 0 8 99 0 9 99 0 0 99 0 0 90 9 8 98 98 8 980 8 980 0 8 9808 0 980 0 8 988 0 990 8 998 9 99 9 99 9 99 8 990 0 900 8 8 9008 0 90 90 8 9 90 9 9 98 8 9 9 8 9 8 98 99 9 9 9 90 0 90 908 90 9 0 9 0 9 8 0 9 0 98 0 90 8 9 8 9 8 9 8 9 9 99 90 9 9 9 9 98009 0 9800 8 98008 8 0 9800 8 8 9800 8 9 0 8 0 9800 9 0 9800 8 98008 0 98009 8 9 0 8 0 9800 8 9800 8 8 8 9 0 8 0 9800 8 0 98009 9 8 9 0 9 980088 0 9 9800 8 9 9 9800 8 9800 0 9800 990000 990 990 9908
SNO-WAY INTERNATIONAL, INC. Hartford, WI 0 USA Website: www.snoway.com 0 Sno-Way International