Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content machined aluminum housing Electro-statically applied polyester powder coat finish High impact UV protected polycarbonate lens Silicone sealing gasket included Canopy or Wall Mount mounting options Flat Lens option 0,50 kg /,0 lbs IP66 IK09 rated (Flat Lens option is IK0 rated) Corrosion-resistant coating for hostile environments** Performance : 700K, 3000K, 3500K, 4000K color temperatures available Lumen maintenance 0,000 hrs [L70 @ 5 C] Operating temperatures: -5 C to 50 C [-3F to F] Electrical : 48V DC luminaire, remote driver & data supply available for 00-77V AC (not included, see page 3 for details) Power and data in cable, 3ft /m cord (#8) watts DC (total consumption varies according to remote power supply efficiency) DMX/RDM enabled option 4 8 " [05mm] CERTIFICADO No.05884, 05885 RETILAP IK09* TOP VIEW 7" 8 [47mm] 3 " 4 " [6mm] [7mm] 9 " [40mm] 3 7 8 " [98mm] 5 8 " [4mm] 3 " [7mm] 3 " [89mm] 4 8 " [05mm] DOME LENS SHOWN 4 8 " [05mm] CN Canopy Mounting * Flat Lens option is IK0 rated. ** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! Canopy Mounting Mounting base screw hole pattern /6 Consult
WALL MOUNTING OPTION 3 " [7mm] 7 8 " [47mm] 3 " [7mm] 9 " [40mm] 3 " [94mm] 5 " 8 [4mm] 5 8 " [66mm] " [5mm] " [64mm] DOME LENS SHOWN " [64mm] WM Wall Mount Option 5 " [8mm] " [5mm] Wall Mount Option Mounting base screw hole pattern /6 Consult
ACCESSORIES Order separately Control Systems: LTO LCU LID LTN Lumentouch is a wall mount DMX 5 controller keypad. Lumencue is a USB / mini SD DMX 5 controller. LumenID is a diagnostic and addressing DMX 5 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 5 controller with a push button rotary dial and live feedback. Power Supply and Dimming Boxes: PSX60, PSX00 Control and Power Supply Boxes: CBX60, CBX00 Power supply box. Up to six low voltage power outputs to fi xtures or fi xture runs. Refer to PSX60, PSX00 specifi cation sheet for details. DMX/RDM control box. Up to six low voltage power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX60, CBX00 specifi cation sheet for details. 3/6 Consult
TYPICAL WIRING DIAGRAMS Non-Dimming Version, Star Layout Maximum distance and quantity of fixtures per PSX00 48V: 3 Lumendome nano 48V DC (0 on center spacing) - 370 of cable maximum. American CE USE Green Yellow/Green Ground Black Brown Power 48V + White Blue Power 48V - Red Black Data + Orange Grey Data - #8-3 Power To Fixture! Always tie both data wires together 00-77V PSX00 48V From PSX60, PSX00 or previous fixture Ground green 48V - white 48V+ black To next fixture(s) Non-Dimming Version, Daisy-Chain Layout Junction box Maximum distance and quantity of fixtures per PSX00 48V: 3 Lumendome nano 48V DC (0 on center spacing) - 370 of cable maximum. #8-3 Power 00-77V PSX00 48V 4/6 Consult
TYPICAL WIRING DIAGRAMS - continued Star Layout (DMX/RDM) Maximum distance and quantity of fixtures per CBX00 48V: 3 Lumendome nano 48V DC (0 on center spacing) - 370 of cable maximum. American CE USE Green Yellow/Green Ground Black Brown Power 48V + White Blue Power 48V - Red Black Data + Orange Grey Data - #8-5 Power Lumentouch.0 00-40V Data input 00-77V CBX00 48V From CBX60, CBX00 or previous fixture lumenterminator (use at the end of each run only) Data- orange Data+ red 48V+ black Ground green 48V - white Daisy Chain Layout (DMX/RDM) Junction box Maximum distance and quantity of fixtures per CBX00 48V: 3 Lumendome nano 48V DC (0 on center spacing) - 370 of cable maximum. Lumentouch.0 #8-5 Power 00-40V Data input 00-77V CBX00 48V 5/6 Consult
HOW TO ORDER LMDN 48V 3 4 5 6 7 5 3 Housing: LMDN - Lumendome Nano Voltage: *48V DC fixture. Refer to accessory page for control & power supply box options. Colors and Color temperatures: 6 Control: NO - No Dimming DMX/RDM - DMX/RDM enabled See page 3 for control & power supply box options, required but not included. Mounting Option: Please specify one of the following: CN - Canopy cover mounting WM - Wall mounting 7K - 700K 30K - 3000K 35K - 3500K 40K - 4000K 7 Option: 4 FTL - Flat Lens CRC - Corrosion-resistant coating for hostile environments Finish: SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color) 6/6 Consult