MODEL Weatherproofing Instructions

Similar documents
SPECIAL SPECIFICATION 1864 Pole Mounted Cabinet

Electrical Integration of PV Systems. Ridha Hamidi, Ph.D.

BreezeMAX Wi² and BreezeACCESS Wi² Quick Installation Guide

SM Sygnus Hybrid Quick Installation Guide Version

System Requirements. Package Contents

Surge Protective Devices Installation, Operation and Maintenance Manual. LoadTrack LTL

Installation Notes TII Model 341 Protector

SAVE THESE INSTRUCTIONS

HyperLink Brand Weatherproof PTZ Camera Lightning and Surge Protector Model: AL-VDP Series

120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans and Solid State Fan Controllers Model: NB FS

WEB Revision T, May 2016 CommScope Actuators

Instruction Manual. Electrical Management System (EMS) EMS-HW30C & EMS-HW50C

60W Power over Ethernet Waterproof Adapter PoE IEEE BT Single Port Injector for Outdoor Application

Specifications 1 Installation Procedures 2 Wiring Diagrams 3 Installation Checklist 5 Maintenance 5 Warranty Information 6 Material Return Policy 6

Power-Over-Ethernet Weatherproof 18" x 16" x 8" Enclosure with Equipment Mounting Plate and Cooling Fans

Chameleon Stand-alone

Your Global Flow Control Partner. Series 50 Valve Status Monitor Operation and Maintenance Manual

icp installation guide

USER MANUAL SET UP LET S GET RAY R-22-I-1-06-N5-R

R-LB R-LX Series Installation, Operation & Maintenance Manual

120 VAC 14x12x7 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fan and Solid State Fan Controller Model: NB FS

ICS Entrance Management Sign Installation Guide. Version 1.0

Surge Protective Devices. STV25K Series. Instruction Manual

Installation and User Guide

Surge Protective Devices. STV100K Series. Instruction Manual

Surge Protective Devices. STV100K Series. Instruction Manual

12-Bit 0-5 Volt Input Adapter (Part # S-VIA-CM14)

Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Enclosure with Mounting Plate and Cooling Fan. Model: NB F. Applications and Features

Electrical Management System (EMS) EMS-HW30C & EMS-HW50C

Model P4017 Single Channel USB Oscilloscope. Quick Start Guide

STRATUS INSTALLATION. 30 Barnet Boulevard New Bedford, MA (508) WOOD SCREWS COVER SENSOR CAULK BRONZE 8" MIN SENSOR HOUSE CABLE CLIP

Installing and Setting Up the Components

Outdoor Risk and Equipment Protection

EMS. Electrical Management System. Progressive Industries Incorporated Morrisville, North Carolina

Wise HP33 THREE PHASE HIGH PRECISION AVR SURVO-MOTOR AUTOMATIC VOLTAGE STABILIZER

ALTAI C1N SUPER WIFI CPE INSTALLATION GUIDE. Version 1.0 Date: September, Altai Technologies Ltd. All rights reserved

Overview of the Cisco Wireless Gateway for LoRaWAN

OSRAM ReliaSys TM D15 LED Retrofit Kit INSTALLATION GUIDE

1 Channel Strobe Controller ORDERCODE 40226

VSD-1MC MANUAL 0-10V / 4-20mA Variable Speed Module with Manual Override

Installation Instructions & User Manual POWERWARE TVSS ZONESENTINEL. AC Panel Transient Voltage Surge Suppressors

4888 and 4988 Outdoor Protected Entrance Terminals

FC-29W 9 UN-UNIVERSAL Dome Housing. Installation Instructions

SERVICE MANUAL MODEL WPP-331-D WEATHERPROOF TELEPHONE MODEL HOB-331-D WEATHER RESISTANT TELEPHONE. and MODEL SSP-311-D STAINLESS STEEL PANEL TELEPHONE

SPYDRx SPYDRx PLUS USER MANUAL

Worldwide Energy and Manufacturing USA, Co., LIMITED Add: RM 1708 C1, NAN FUNG TOWER, 173 DES VOEUX RD CENTRAL, HK. Installation Manual

Progressive Industries, Inc. EMS Electrical Management System

Installation and Operations Manual. Electronic copies available at (Rev_ )

Total Home Surge Protection for Point-of-Entry. FirstSurge TM. User Manual - Canada (English)

SDM120 SERIES. SDM120 series User Manual. Single phase two wire DIN rail energy meter (One module)

The Telrad LTE CPE 7000 Outdoor Customer Premise Equipment Installation

FleetPhone. Installation guide. The mobile satellite company

BTU-4D/BTU-4D-I Digital Temperature Unit & Sensors. Installation and Operation Manual

MODEL BFD - BIG FLEXIBLE DISPLAY

Analog Input/Output Modules

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions

Installation Instructions Revision 1.0 June 2009 Page 1 of 6

Power-Over-Ethernet (PoE) Weatherproof 14 x12 x7 Enclosure with Mounting Plate. Model: NB Applications and Features

33.6W Power over Ethernet Waterproof Adapter PoE Plus Single Port Injector for Outdoor Application

SP6R Level Controller Operation Manual

Series Amp Quick Connect Input and Output Power Panels

MT-8000 series. MT-8056T/ MT-6056T Installation Instruction. 1.0 Installation and Startup Guide. 2.0 Installation Instructions

WS must be used in a temperature controlled place. It is compliant to ETS Class T

C o n n e c t P o r t X 4 U t i l i t y

Nano Liner Allegro AC XB RGB / DW INSTALLATION GUIDE V1.2

QUICK START GUIDE FOR THE TRANZEO WIRELESS TR-CPE90

H290 HUMIDITY TRANSMITTER INSTRUCTION MANUAL

ORB TM 4-20 ma Input Box Installation & Operation Manual

ZC-OH5 TAMPER-RESISTANT INDOOR/OUTDOOR HOUSING INSTRUCTION MANUAL FOR USE WITH GANZ ZC-D5000 SERIES MINIDOME CAMERAS

PowerLogic High Density Metering System 1-Meter Enclosure

SPECIAL SPECIFICATION 6322 Digital Video Encoder/Decoder (Ethernet) System

Electrical Management System (EMS) EMS-HW30C & EMS-HW50C

AP-Ext-N User Manual

Please read the Operational Manual before attempting to use this product. Operational Manual

DWL-1750 TM. This product can be set up using any current web browser, i.e., Internet Explorer or Netscape Navigator. Wireless Bridge / Router

ELECTRO-MECH SCOREBOARD CO.

Canopy Surge Suppressor

EMS Electrical Management System

User Manual - Canada. TPS3 03 DC For DC Photovoltaic Applications. Surge Protective Device

Operating Manual / IEC. Explosion-Proofed Junction Boxes, Polyester. Wallücker Bahndamm 7 DE Kirchlengern

HT2000 Transverter Installation & Operation Manual

Rugged Outdoor Wireless-N Access Point - 2.4GHz - PoE Powered - Metal IP67

Model HM-535 Power Supply Installation and Service Instructions

Instruction Manual. M Pump Motor Controller. For file reference, please record the following data:

Model HU-224/225. Technical Information TI.224/ Humidity Transduce r FOR ADDITIONAL INFORMATION SEE HU-224/225 DATA SHEET

F1000 User's Manual. (Version: V1.01)

SPECIAL SPECIFICATION 6274 Microwave Vehicle Detection System

Rotork Fairchild PAX1 Linear Actuator User s Manual

BRB Systems USA Co. Instruction Manual. USA Trap Solo Voice Release System. 12V & 120V Versions.

Mounting on the Ceiling Using Flush Mount (Face Down)

Wa r n i n g-wa r n i n g-wa r n i n g

M215 (M215-60) Safety

Bullet Camera. Hardware Manual E44, E45, E46. Ver. 2014/05/05

MICHIGAN DEPARTMENT OF TRANSPORTATION

iconverter 2-Module Power Chassis

Installing a Power over Ethernet injector

Quick Installation Guide

Meter Enclosure and Equipment Standards

AN-80i. Advanced Broadband Wireless Infrastructure Solutions. Quick Install Guide

QUICK START GUIDE FOR THE TRANZEO WIRELESS TR CPE-80

Transcription:

MODEL 1024-00 Weatherproofing Instructions Body Mount Antenna Figure 1 Oberon s 34-BMANT24 and BMANT5 (Figure 1) outdoor body mount antennas can be mounted directly to the Model 1024 enclosure. There are (3) 5/8 knockouts on the top and bottom of the enclosure for up to six body mount antennas. These antennas have an O-ring in the base, so when the antenna is properly tightened, they create a water tight seal on the enclosure. 1

Vent and Bulkhead RJ-45 connectors Figure 2 The model 1024-00 has (2) 1 knockouts in the bottom, which can accommodate Oberon s 35-RJ45-KIT bulkhead mounted modular connector, or 1 conduit clamps (Figure 2).The ½ knockout in the side of the 1024-00 is for the Gore vent. The Gore vent (Oberon Part No. 35-GOREVENT-KIT) is a Gore-tex material, which allows the enclosure to breathe (equalize interior and exterior air pressure over temperature) without drawing in water vapor (Figure 2). This can help to reduce condensation in tightly weather-proofed enclosures. Notice that the Gore Vent tightening nut is on the interior of the enclosure. 2

Lightning Arrestor/Surge Protector Weatherproofing Instructions Figure 3 The lightning arrestor/surge protector can be installed in the 5/8 knockouts as shown (Figure 3). The surge side of the protector is towards the antenna. The protected side is towards the access point. The grounding ring is attached to the exterior of the enclosure through the surge protector s extended, threaded jack. The grounding wire is crimped into the grounding ring. The grounding wire must be connected to an appropriate building grounding electrode (not the AC line power system neutral or ground), to properly protect the equipment. Installation of the building ground electrode should be performed by a qualified electrician. IMPORTANT NOTE: The building ground electrode wire is for proper operation of the surge suppressor/lightning arrestor only. It is not intended to provide AC line power ground. The model 1024-00 is designed for operation with low voltage equipment only. The model 1024-00 is not designed for AC line (220V) powered equipment. 3

Cabling to Antenna Figure 4 The cable from the lightning arrestor/surge protector to the antenna should include a drip loop to allow water to drip of the cable. The cable connector attached to the lightning arrestor, and all exterior cable connections, should be properly weather protected as shown in the diagram (Figure 4). Most RF connectors have an interior gasket to prevent water from accumulating inside the connector. The connector must be properly tightened to ensure that this gasket properly seals the connector. IMPORTANT NOTICE: Oberon s model 1024-00 is not ventilated. The enclosure is designed to provide the capability for NEMA 4 protection against dust and falling/spraying water only. Power dissipated by electronic equipment within the enclosure will cause the internal temperature to rise. Equipment should be de-rated by the anticipated interior temperature rise. Equipment drawing greater than 20 Watts of line power should not be operated in this enclosure. Operation of commercial electronic equipment outdoors and within non-ventilated enclosures may expose the equipment to temperature and humidity ranges beyond the specified operational or storage range of the equipment. Equipment warranties may be voided by operation in outdoor environments. 4

Weatherproofing External Connectors MATERIAL LIST 1 x 16 butyle mastic ¾ x 20 electrical tape DE-OX oxide inhibitor grease (optional) REQUIRED TOOLS Knife Step 1. Apply DE-OX with q-tip to both connector and conductor (optional DE-OX helps to prevent corrosion). Step 2. Assemble connectors and wipe excess DE-OX away from insulation. Figure 5 NOTICE Installation of this product should only be performed by trained, qualified and experienced personnel. Installation instructions for this product should be read thoroughly before installation is performed. The manufacturer and supplier of this product disclaim any liability or responsibility for the results of improper or unsafe installation practice. 5