Air Mask PARTS LIST High Pressure TAL 0 (L) Rev. MSA 00 Prnt. Spec. 000000 (A) Mat. 000 Doc. 000000
pressure demand facepiece NFPA Facepiece Components Facepiece Blank Type Small Medium Large Hycar 00 00 00 Silicone 0 00 0 Item P/N Description 00 Upper Lens Ring 000 SpeedOn Harness Assembly (Firehawk) a 0 SpeeD-ON Harness Assembly (with Buckles) b 0 SpeeD-ON Harness Assembly (less Buckles) Screw ( Req d) a 00 Screw Kit ( Req d) Rubber Harness Black (less Buckles) 000 Lens Super Hardcoat 00 Lower Lens Ring 0000 Slide Cover Buckles ( Req d) 00 Buckle Ass y with D-Ring ( Req d) 0 See Chart Facepiece Blank 0 Valve Seat ( Req d) 0 Valve Disc ( Req d) 0 Component Housing Ring Screw a 0 Screw Kit 00 Adapter Ass y a 00 Push-To-Connect Component Housing Cover (Firehawk) 0 Neckstrap 0 Component Housing Assembly (Complete) a 0 Inlet Disc b 00 Valve Spider c 00 Speaking Diaphragm Retainer d 00 Speaking Diaphragm e 0 Component Housing with Exhalation valve f 0 Valve Spider (Firehawk) Nosecup Assembly (with valves) a 0 Medium, Gray b 0 Large, Gray c Medium, Black d Large, Black e 0 Spectacle Kit 0 000 Screws ( Req d) 0a 0 Screw Kit ( Req d) 00 Screw () (Firehawk) 00 NightFighter Bracket TAL 0 (L) Rev. - 000
PR- Parts List and Ordering Information (P/N 00) Replacement Parts # Req Part No. Description 000 Regulator Cap 00 O-Ring 000 Piston 00 O-Ring 0000 Outer Spring 000 Inner Spring 00 Seal Ring 000 Regulator Body 00 O-Ring 0 O-Ring 000 Seat 00 Inlet Filter 00 Inlet Filter O-Ring Related Parts Intermediate Pressure Hose, Threaded 00 Intermediate Pressure Hose, QC 00 Intermediate Pressure Hose, ExtendAire 00 High Pressure Gauge Line Hose 00 U-Clip 000 Mounting Bracket 00 Screw 00 Pressure Relief Valve 00 PR- Overhaul Kit 000 Flow Test Adapter for Threaded IP Hose 00 Flow Test Adapter for QC IP Hose 000 TAL 0 (L) Rev. - 000
Firehawk First Stage Regulator Assembly part number 00 (with Threaded Hose 000 / Relief Valve ) part number 00 (with Quick-Connect Hose 000 / Relief Valve ) a 0 0 Item P/N Description O-Ring 0 High Pressure Hose Backup Ring O-Ring Pin ( Req d) 0 Regulator Body Orifice Screw 00 Cap 000 Threaded Hose a 000 Quick-Connect Hose 0 0 O-Ring Relief Valve 0000 Hose Assembly Backup Ring O-Ring First Stage Regulator Assemblies (Less High Pressure Hose, Pressure Gauge & Hose Assembly and Second Stage Regulator) TAL 0 (L) Rev. - 000
Firehawk Mask Mounted Regulator Regulator Assembly 00 00 00 00 00 00 00 00 Component Oring, Silicone, Red Oring, Fluro., Blue Diaphragm, Silicone 000 U-Clip 00 Retainer, Spring 00 Knob, Bypass 00 Spring, Button 00 Body, Bypass 00 Insert, Bypass 00 0 Hose, Threaded 000 Hose, QC 000 Screen, Bypass 000 Spring, Diaphragm 000 Oring, Viton, Black 000 Oring, Buna-N, Black 00 Button, PTC 00 Button, STC 00 Button, PTC 00 Valve Assembly 00 Housing, Regulator 000 Cover, Purge 00 Cover, Non-Purge 000 0 Seal Ring 00 Lubricant 000 0 Lubricant 000 must be applied to components marked with an asterick. Refer to the maintenance manual for instructions. 0 Second stage critical repair parts contained within the black outlined box must be installed by CARE trained and certified repair technicians and tested with an MSA approved dynamic flow tester. TAL 0 (L) Rev. - 000
Firehawk Mask Mounted Regulator Regulator Assembly 00 00 00 00 00 0000 000 000 Component Oring, Silicone, Red Oring, Fluro., Blue Diaphragm, CBRN 00 U-Clip 00 Retainer, Spring 00 Knob, Bypass 00 Spring, Button 00 Body, Bypass 00 Insert, Bypass 00 0 Hose, Threaded 00 Hose, QC 00 Screen, Bypass 000 Spring, Diaphragm 000 Oring, Viton, Black 000 Oring, Buna-N, Black 00 Button, PTC 00 Button, STC 00 Button, PTC 00 Valve Assembly 00 Housing, Regulator 000 Cover, Purge 00 Cover, Non-Purge 00 0 Seal Ring 00 Cap, Spring 00 Shield, CBRN 000 Lubricant 000 0 Lubricant 000 must be applied to components marked with an asterick. Refer to the maintenance manual for instructions. 0 TAL 0 (L) Rev. - 000 Second stage critical repair parts contained within the black outlined box must be installed by CARE trained and certified repair technicians and tested with an MSA approved dynamic flow tester.
Cylinder and Valve Assembly Cylinder Valve Assembly 0 CU. FT. Composite (Carbon) Model -- (Rated 0 Minutes) 00 CU FT. Composite (Carbon) Model -- (Rated Minutes) 0 CU. FT. Composite (Carbon) Model -- (Rated 0 Minutes) 00 CU. FT. Composite (Carbon) Model -- (Rated Minutes) Item P/N Description 0 Warning Label 0 Cylinder Valve Inlet Tube O-Ring psig a 0 O-Ring 000 psig Safety Plug Disc and Gasket Kit 00 psig Valve Insert Assembly Valve Stem 0 Valve Stem Washer O-Ring 0 Packing Gland Spring Locknut Handwheel 0 Protector Cap Valve Body 00 psig 0 Air Pressure Gauge 0 Gauge Guard 0 TAL 0 (L) Rev. - 000
AirFrame Firehawk Carrier and Harness Assembly Double Pull part number 00 b a 0 0 0 Item P/N Description Item P/N Description 000 Cylinder Band/Latch 0 Label 00 Left Shoulder Strap 00 Chest Strap Kit (Optional) a Right Chest Strap b 0 Left Chest Strap Right Shoulder Strap 0 Rivet ( Req d) 00 Adjustment Bracket Left Double Pull Strap 00 Left Double Pull Belt 0 00 Belt Clip 00 Left Single Pull Belt 00 O-Ring 00 Carrier Assembly 000 Retaining Ring 00 Spring 00 Spring 000 Spring Bushing 0 Right Pull Strap Right Pull Belt 0000 Pin 000 Screw Bumper 00 Std. Lumbar Pad 000 (Optional - Not Shown) Swiveling Lumbar Pad (Optional) 00 (Optional) 000 Support 0 00 Rubber Bearing 00 Nut 000 Screw TAL 0 (L) Rev. - 000
Carrier and Harness Assembly Double Pull part number 00 Single Pull part number 00 b a 0 0 Item P/N Description Item P/N Description 000 Cylinder Band/Latch 0 Label Left/Right Shoulder Strap 00 Chest Strap Kit (Optional) a Right Chest Strap b 0 Left Chest Strap 000 Bracket Spring 000 Bracket Back Plate 000 Bracket Adjustment Left Pull Strap 00 Left Pull Belt (double pull) 0 00 Belt Clip 00 Single Pull Belt 00 O-Ring 00 Carrier Assembly 000 Retaining Ring ( Req d) 000 Clip 000 Bracket 00 Spring 00 Spring 000 Spring Bushing 0 Right Pull Strap Right Pull Belt 0000 Pin ( Req d) 0 Rivet ( Req d) 00 Washers ( Req d) 00 Bumper ( Req d) 00 Optional Lumbar Pad (Use only with Vulcan) TAL 0 (L) Rev. - 000
Carrier and Harness Assembly part number 0 a 0 0 0 Item P/N Description Tee Nut Left Shoulder Pad Ass y Nut Left/Right Shoulder Pad Friction Buckle Strap Ass y Chest Strap Screw 0 Left Chest Strap Ass y Right Chest Strap Ass y 00000 Right Shoulder Pad Ass y 0 0 Friction Buckle Ass y Adjusting Strap Item P/N Description Item P/N Description Screw Washer Carrier Band and Latch Assembly Push Nut Cap Left Spring 0 Screw Washer 0 Buckle Assembly Right Spring 0 Spring Pin 0 Back Pad Tongue Buckle 0 Waist Strap Screw 00 Belt Clip 0 Label Wear Pad 0 0 Optional Lumbar Pad (use only with formed carrier) 00 O-Ring TAL 0 (L) Rev. - 000 0
Quick Fill URC Assembly High Pressure part number 00 Item P/N Description O Ring 000 Nipple (HP) 0 Washer 000 Handwheel (HP) 00 Quick Fill Adapter 000 Dust Cover Ass y 000 Washer 00 Bushing 00 Screw 0 00 Relief Valve (HP) 0 TAL 0 (L) Rev. - 000
Hard Case Assembly part number 0 ( psig) Soft Case Assembly part number 0 NightFighter System Receiver part number 00 NightFighter System Transmitter part number 00 w/quick-fill 00 00 Transmitter (HP) w/quick-fill 00 Transmitter (HP) 0000 Hose Ass y 00 Orifice (Non QF only) 000 Plug O Ring Back-up Ring NightFighter System w/std. Gauge part number 00 w/quick-fill 000 0000 Spool 0000 Nut O Ring Back-up Ring 00 Transmitter (HP) w/quick-fill 00 Transmitter (HP) 0000 Hose Ass y 00 Orifice (Non QF only) 000 Gauge Guard 0000 Gauge NightFighter System w/icm s part numbers w/o QF 00 ICM 000 Plus w/sensor 00 ICM 000 w/sensor 00 ICM 000 Plus 000 ICM 000 w/qf 00 ICM 000 Plus w/sensor 000 ICM 000 w/sensor 00 ICM 000 Plus 00 ICM 000 TAL 0 (L) Rev. - 000 0000 Spool 0000 Nut O Ring Back-up Ring ICM ONLY 00 ICM 000 Plus w/sensor 00 ICM 000 w/sensor 00 ICM 000 Plus 00 ICM 000 00 Transmitter (HP) w/quick-fill 00 Transmitter (HP) 0000 Hose Ass y 00 Orifice (Non QF only)
Firehawk Dual Purpose Kit w/threaded Hose: P/N 000 w/quick-connect hose: P/N 00 Item P/N Description 00 Vented Dust Cover Plunger Housing 0 O-Ring 0 Plunger Assembly Manifold O-Ring 00 Threaded Hose Assembly a 00 Quick-Connect Hose Assembly O-Ring ( Req d) Dual Purpose Hose Assembly 0 Hose Connector 0 O-Ring 0 TAL 0 (L) Rev. - 000
Firehawk Extend-Aire Kit w/dual Quick-Connect: P/N 00 Item P/N Description Nipple Assembly O-Ring 0 Dust Cover QC Coupling 00 Manifold Block TAL 0 (L) Rev. - 000
Firehawk Extend-Aire Assembly P/N 00 Item P/N Description Nipple Assembly O-Ring 00 Manifold Block 0 Dust Cover O-Ring O-Ring TAL 0 (L) Rev. - 000