UltraLow Capacitance ESD Diode Array Railtorail diodes with internal TS diode ESD / transient protection of four lines and one cc line exceeding: IEC00 (ESD): ± 5 k (contact) IEC00 (EFT):.5 k / 50 A (5/50 ns) IEC005 (surge): 3 A (8/0 µs) Reverse working voltage data lines: 5.3 max. Reverse working voltage cc: max. ery low capacitance: 0. pf typ. ery low reverse current < na typ. ery low clamping voltage: typ. at positive transients typ. at negative transients Pbfree (RoHS compliant) package Qualified according AEC Q Applications USB.0 ports and future USB 3.0 ports Ethernet port: /0/00 Mb/s IEEE 39 FireWire ports Mobile communications e.g. highspeed SIM card protection Consumer products (STB, DD, DSC, DC...) Notebooks and desktop computers, peripherals ESD53URRS 5 3 Type Package Configuration Marking ESD53URRS SOT33 pins, unidirectional E8s 008
Maximum Ratings at T A = 5 C, unless otherwise specified Parameter Symbol alue Unit ESD contact discharge ) ESD 5 k Peak pulse current (t p = 8 / 0 µs) ) I pp 3 A Peak pulse power (t p = 8 / 0 µs) ) P pk 50 W Operating temperature range T op 55...5 C Storage temperature T stg 5...50 Electrical Characteristics at T A = 5 C, unless otherwise specified Parameter Symbol alues Unit min. typ. max. Characteristics 3) Reverse working voltage RWM pin ) to pin 5 pin to pin 5 5.3 Breakdown voltage I (BR) = ma, any pin to pin 5 Reverse current R = 5.3, any pin to pin 5 Clamping voltage I PP = A, t p = 8/0 µs ), any pin to pin 5 I PP = 3 A, t p = 8/0 µs ), any pin to pin 5 Forward clamping voltage I PP = A, t p = 8/0 µs ), any pin to pin 5 I PP = 3 A, t p = 8/0 µs ), any pin to pin 5 Line capacitance 5)) R = 0, f = MHz, any pin to pin 5 ESD according to IEC00 I pp according to IEC005 (BR).3 I R < 0 na CL FC 3 5 C T 0. 0. pf 3 It is strongly recommended that pin 5 is connected to ground for propper functionality. I/0 pins are pin, 3,, 5 Total capacitance line to ground 008
Power derating curve P pk = ƒ (T A ) Clamping voltage, cl = ƒ(i pp ) t p = 8 / 0 µs % 5 Ppk or Ipp 90 80 70 CL 3 0 50 0 9 30 0 8 7 0 0 5 50 75 0 C 50 T A 0 A I pp Forward clamping voltage FC = ƒ(i PP ) t p = 8 / 0 µs Reverse current I R = ƒ( R ) T A = Parameter A 7 50 C FC IR 8 5 C 3 9 85 C 5 C 0 0 3 A 5 I pp 0 3 R 3 008
Diode capacitance C T = ƒ ( R ) f = MHz 0. pf CT 0. 0.3 0. 0. 0 0 3 5 R 008
Application example ESD53URRS data lines, unidirectional Connector protected highspeed data lines 3 ESD sensitive device 5 The protection diode should be placed very close to the location where the ESD or other transients can occur to keep loops and inductances as small as possible. It is strongly recommended that pin 5 is directly connected to a ground plane on the board for propper functionality. Pin is not connected. Application example ESD53URRS data lines and power supply line, unidirectional Connector protected highspeed data lines, protected power supply line (+cc) 3 ESD sensitive device +cc 5 Pin is directly connected to the positive power supply line (+cc). It is strongly recommended that pin 5 is directly connected to a ground plane on the board for propper functionality. 5 008
Package SOT33 ESD53URRS Package Outline ±0. +0. 0. 0.05 5 x 0. M 0. MAX. 0. 0.9 ±0. A Pin marking 0.5 3 0.5.±0. 0. MIN. +0. 0.5 0.05 Foot Print 0.3 0.9. 0.7 0.5 0.5 Marking Layout (Example) Small variations in positioning of Date code, Type code and Manufacture are possible. Manufacturer 005, June Date code (Year/Month) Pin marking Laser marking BCR8S Type code Standard Packing Reel ø80 mm = 3.000 Pieces/Reel Reel ø330 mm =.000 Pieces/Reel For symmetric types no defined Pin orientation in reel. 0..3 8.5 ±0. 0. M A Pin marking.5. 008
Edition 0000 Published by Infineon Technologies AG 87 München, Germany Infineon Technologies AG 007. All Rights Reserved. Attention please! The information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics ( Beschaffenheitsgarantie ). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of noninfringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office ( www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that lifesupport device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 7 008