Peak Pulse Current (tp = 8/20us) Ipp 2.5 A. Storage Temperature Range Tstg -55 to I PP = 1A, tp = 8/20µs

Transcription

1 LITE-ON SEMICONDUCTOR ESD PROTECTION DEVICE STAND-OFF VOLTAGE 5.0 Volts POWER DISSIPATION 60 WATTS GENERAL DESCRIPTION The has been specifically designed to protect sensitive components which are connected to data and transmission lines from overvoltages caused by ESD (electrostatic discharge), EFT (electrical fast transients), and lightning. FEATURES Protects two I/O lines Max. peak pulse power : Ppp = 60W at tp = 8/0 us. Low Capacitance : 0.8pF Typical Low clamping voltage IEC , level ( ESD ), > ±5KV ( air ) ; > ±8KV ( contact ). APPLICATION USB Power & Data Line Protection Ethernet 0BaseT Video Line Protection T/E secondary IC Side Protection Portable Electronics WAN/LAN Equipment MECHANICAL DATA Case Material: "Green" molding compound UL flammability classification 9V-0 (No Br.Sb, Cl) Terminals: Lead Free Plating (Matte Tin Finish), solderable per J-STD-00 and JESD-B/0. Moisture Sensitivity: Leve per J-STD-00C Component in accordance to RoHs 00/95/EC SOT- SOT- DIM. MIN. MAX. A A A b b D.80.0 E.0.6 E.0. e e.9 BSC 0.0 BSC L All Dimensions in millimeter PIN A SSIGNMENT Ground, Input Lines MAXIMUM RATINGS (Tj= 5 unless otherwise noticed) Rating Symbol Value Unit Peak Pulse Power (tp = 8/0us) Ppk 60 (Max) W Peak Pulse Current (tp = 8/0us) Ipp.5 A Operating Junction Temperature Range TJ -55 to + 5 Storage Temperature Range Tstg -55 to + 50 Soldering Temperature, t max = 0s TL 60 ELECTRICAL CHARACTERISTICS (Tj= 5 unless otherwise noticed) Parameter Symbol Conditions MIn Typ Max Unit Reverse standoff voltage V RWM V Breakdown voltage VBR IR = ma V Reverse leakage current IRM V DRM =5V ua Clamping Voltage Junction Capacitance V C C J I PP = A, tp = 8/0µs I PP =.5A, tp = 8/0µs Between I/O pins V R = 0V, f = MHz Any I/O pin to Ground V R = 0V, f = MHz V pf REV. 0, Oct-0, KSIR57

2 RATING AND CHARACTERISTIC CURVES 000 Figure. 8/0 us pulse waveform according to IEC Figure. ESD pulse waveform according to IEC Peak Pulse Power (W) 00 0 Ppp/Ppp (5 ) TJ =5, tp (us) = 8/0 us exponentially decay waveform Pulse Time (us) Junction Temperature ( ) Figure. Power Dissipation versus Pulse Time Figure. Peak pulse power versus TJ TJ =5, f=mhz, Vosc=00mV Capacitance (pf) IR / IR (5 ) Any I/O pin to GND 0 5 Reverse Voltage (V) Figure 5. Capactiance versus Reverse Voltage Junction Temperature ( ) Figure 6. Reverse Leakage Current versus TJ

3 RATING AND CHARACTERISTIC CURVES I/O +/-8KV ESD Contact discharge V (i/o) Figure 7. ESD Test Configuration Figure 8. Clamped +8 kv ESD voltage waveform Figure 9. Clamped -8 kv ESD voltage waveform

4 Application Information VBUS USB Controller GND CH- CH- D- D+ VBUS USB Port Figure 0. USB Power & Data Line ESD Protection GND CH- CH- TPR RJ5 GND CH- CH- TNR RPR RNR Figure. Ethernet/WAN/LAN/T/E RJ5 Connectors ESD Protection GND Connector CH- CH- Controller Data Line Signal Line Figure. Portable Device Data & Signal Line ESD Protection

5 Legal Disclaimer Notice Marking & Orientation Packaging Information DEVICE Q'TY/REEL (PCS) REEL DIA. (INCH) Q'TY/BOX (PCS) Q'TY/CARTON (PCS) K SOT- Soldering Pad Layout

6 Legal Disclaimer Notice Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.