Displays
TFT 3.2" H Thin Film Transistor Display 3.2", horizontal Characteristics TFT-Display (thin-film-transistor) with high graphical resolution Mounting horizontal Faceplate thickness 2 mm / 3 mm Fixing welding studs M3 8 Connection technology screw terminals AWG 28 0.14 mm2 ribbon cable 1.5 mm2 Rear view Further layout variants. 1.45/5 Compatible with SP-Bus IV. 2.1 2.20 Power supply 12 V 30 V DC smoothed Current consumption operating current 24 V 80 ma quiescent current 24 V 30 ma Screen diagonal 3.2 inches / 8.2 cm Resolution horizontal 400 240 pixels Display area horizontal 70 mm 42 mm Supported colours 65,535 colours / RGB 16 Bit Brightness 250 cd/m2 (adjustable luminosity) Backlight white LED, life cycles 60,000 h Pane TFT 3.2" crystal clear, 2 mm / 3 mm Temperature range 0 C +65 C Control dual, gray, BCD, 7-segment, 1 out of n, SP-Bus Connection common anode or common cathode Configuration directly on the device via TFT Config Kit directly on the device via micro button on site in installed condition via Touch Magnet Pen on site in installed condition via app (WLAN dongle required) Number of floors 63 floors Special information 2 special texts / graphics (also as full screen) 5 special texts / graphics via SP-Bus (also as full screen) Arrow up / down / up-down / travel-up / travel-down (travel signal shown as animation) Buzzer can be assigned to the special information (e. g. overload) can be used as acoustic acknowledgement (only with control via SP-Bus) Connection elements When controlled via SP-Bus the buttons call up / call down, re-starting indicator up / down, the external gong as well as a key switch can be connected. Compliance option 81-70 with modified layout 81-72 81-70 81-71 81-71 CLASS 1 CLASS 2 option 81-72 / 81-71 Class 1 with pane TFT 3.2" H wg option 81-71 Class 2 with pane TFT 3.2" H ESG 1.46 1.45/1
TFT 3.2" H Thin Film Transistor Display 3.2", horizontal Dimensions 6 42 88.5 space for cables 70 96 24.3 2 (3) Cutout Mounting R 2 42.1 80 welding studs M3 8 70.1 80 Accessories Encoder (option). 1.60 DC Decoupler (option). 1.63/1-1.63/2 ASSEMBLY GROUP TFT 3.2" H PANE Accessories TFT (option). 1.45/6-1.45/7 WLAN dongle, Radio clock module, Touch Magnet Pen Software GUIDE. 1.66/1-1.66/2 TFT Config Kit, LCD / TFT Simulation Kit Order separately the pane. Safety glass (ESG) wg on demand. 1.45/2 1.47
TFT 3.2" V Thin Film Transistor Display 3.2", vertical Characteristics TFT-Display (thin-film-transistor) with high graphical resolution Mounting vertical Faceplate thickness 2 mm / 3 mm Fixing welding studs M3 8 Connection technology screw terminals AWG 28 0.14 mm2 ribbon cable 1.5 mm2 Rear view Further layout variants. 1.45/5 Compatible with SP-Bus IV. 2.1 2.20 Power supply 12 V 30 V DC smoothed Current consumption operating current 24 V 80 ma quiescent current 24 V 30 ma Screen diagonal 3.2 inches / 8.2 cm Resolution vertical 240 400 pixels Display area vertical 42 mm 70 mm Supported colours 65,535 colours / RGB 16 Bit Brightness 250 cd/m2 (adjustable luminosity) Backlight white LED, life cycles 60,000 h Pane TFT 3.2" crystal clear, 2 mm / 3 mm Temperature range 0 C +65 C Control dual, gray, BCD, 7-segment, 1 out of n, SP-Bus Connection common anode or common cathode Configuration directly on the device via TFT Config Kit directly on the device via micro button on site in installed condition via Touch Magnet Pen on site in installed condition via app (WLAN dongle required) Number of floors 63 floors Special information 2 special texts / graphics (also as full screen) 5 special texts / graphics via SP-Bus (also as full screen) Arrow up / down / up-down / travel-up / travel-down (travel signal shown as animation) Buzzer can be assigned to the special information (e. g. overload) can be used as acoustic acknowledgement (only with control via SP-Bus) Connection elements When controlled via SP-Bus the buttons call up / call down, re-starting indicator up / down, the external gong as well as a key switch can be connected. Compliance option 81-70 with modified layout 81-72 81-70 81-71 81-71 CLASS 1 CLASS 2 option 81-72 / 81-71 Class 1 with pane TFT 3.2" V wg option 81-71 Class 2 with pane TFT 3.2" V ESG 1.48 1.45/3
TFT 3.2" V Thin Film Transistor Display 3.2", vertical Dimensions space for cables space for cables 70 6 128 6 42 60 24.3 2 (3) Cutout Mounting R 2 70.1 120 welding studs M3 8 42.1 50 Accessories Encoder (option). 1.60 DC Decoupler (option). 1.63/1-1.63/2 ASSEMBLY GROUP TFT 3.2" V PANE Accessories TFT (option). 1.45/6-1.45/7 WLAN dongle, Radio clock module, Touch Magnet Pen Software GUIDE. 1.66/1-1.66/2 TFT Config Kit, LCD / TFT Simulation Kit Order separately the pane. Safety glass (ESG) wg on demand. 1.45/4 1.49
LAYOUTS Layout-variants, horizontal / vertical 1 Arrows up / down / up-down/ travel-up / travel-down (travel signal shown as animation) 2 2 Floor Height of caracters 30 mm (norm compliant) 1 TFT 3.2" H / V layout horizontal LCD layout vertical LCD 1.50 1.45/5 layout horizontal TFT layout vertical TFT
ACCESSORIES TFT DISPLAYS Accessories WLAN dongle By means of the WLAN dongle, the SCHAEFER TFT displays can be configured via an app. Connected to the display, the WLAN dongle can be installed to the fixture so that the TFT displays can be configured later on in installed condition. Touch Magnet Pen Using a Touch Magnet Pen, the TFT 3.2", TFT 4.3", TFT 5.6" and TFT 7" can be configured when installed. The control, time, buzzer, standby on/off, etc. can be configured here. Radio clock module Fixing Power supply Current consumption Connection technology The radio clock module serves to synchronise the time and can be installed in the machine room using a top hat rail. A GPS-satellite signal is required for the operation of the module. For this, the antenna cable has to be laid accordingly. All displays that have to be synchronised must be connected to the radio clock module via the SP-Bus. The signal for the time is sent via this connection. At the same time the displays can be controlled via parallel signals, e. g. dual. top hat rail mounting 12 27 V DC 13 ma with 24 V DC screw terminals 0.1 mm2 1.5 mm2 Temperature range -20 C +70 C Antenna cable (2 m) with GPS receiver 1.45/6 1.51
ACCESSORIES TFT DISPLAYS Accessories TFT Config App System requirements Functions The TFT Config App is available for download free of charge in the Google App Store (https://play.google.com). With this app the TFT displays can be configured via WLAN and bluetooth. For this, neither the display has to be removed nor the fixture has to be opened. The configuration can easily be made on the PC, saved on a mobile device and transferred via smartphone or tablet on site to the TFT display. Android 2.3 or higher Creation of the complete display layout on the smartphone / tablet Editable presentation of: floors, images (also own photos), direction arrows, elevator data Saving of all data in one project Opening of projects Sending of projects via email Synchronising of the TFT time with the time of the smartphone / tablet Compatible displays TFT 3.2", TFT 4.3", TFT 5.6", TFT 7" 1.52 1.45/7
1.45/8 1.53