For RoHS part add suffix NL 2 Peak solder temperature rating per Table 5-2 in IPC/JEDEC J-STD-020C IEEE 802.3af/ANSI X3.263 compliant performance Designed for IP phone or switch applications Electrical Specifications @ 25 C Operating Temperature 0 C to 70 C Insertion Differential to Common DC Part Loss Return Loss Mode Rejection Crosstalk Hipot Resistance Number (db MAX) (db MIN @ 100 Ω) (db MIN) (db MIN) (Vrms MIN) Balance RoHS 2 Ports 1-100 1-30 40 50 60-80 30 60 100 30 60 100 < (%) MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz H1180 NL 4c 1-1.2-16 -14-13 -12-43 -37-33 -45-40 -35 1500 H1187 NL 4c 1-1.2-16 -14-13 -12-43 -37-33 -45-40 -35 1500 1-1.2-16 -14-13 -12-43 -37-33 -45-40 -35 1500 H2019 NL 4c 1-1.2-16 -14-13 -12-43 -37-33 -45-40 -35 1500 3.5 H2005A NL 4d 2-1.2-16 -14-13 -12-50 -43-35 -43-37 -33 1500 3.5 H2006A NL 4d 2-1.2-16 -14-13 -12-43 -37-33 -43-37 -31 1500 3.5 H2008 NL 4d 2-1.2-16 -14-13 -12-40 -35-30 -43-37 -33 1500 3.5 NL 4c 2-1.1-16 -14-13 -12-43 -37-33 -43-37 -33 1500 3.5 H2014 4-1.2-16 -14-13 -12-43 -37-33 -45-40 -35 1500 3.5 H2017 4-1.2-16 -14-13 -12-43 -37-33 -45-40 -35 1800 3.5 HX2019 1 NL 4a 1-1.4-16 -14-13 -12-45 -40-35 1500 3.5 1. Extended temperature (-40 C to +85 C) 3. Contact for RoHS compliant part availability 2. Add suffix NL for RoHS compliant parts, e.g. H1180 changes to H1180NL 4. MSL=Moisture Sensitivity Level a=1 b=2 c=3 d=4 e=5 H1180.300 7,62 1 3 5 2,54.290 7,37 +.005 H1180.300.415-7,62 10,54 2,54 TYP 2 4 6.018/.020 SUGGESTED PAD LAYOUT TYP 0,45/0,51 Mechanicals.070 1,78.430 10,92 H1187.390 9,91 6 5 4 H1187 1 2 3.300 MAX 7,62.275 MAX 7,00.240 6,10.258 6,55.075 1,91 SUGGESTED PAD LAYOUT.250 6,35.003/0,08 0 /8 /.015 /0,38 2,54 Weight..........0.6 grams Tape & Reel.......500/reel Tube..............65/tube Dimensions: Inches Unless otherwise specified, all tolerances are ± mm Weight.......... 0.6 grams Tape & Reel....... 500/reel Tube............. 70/tube www.pulseeng.com 1 H327.H (8/05)
.500 12,70 7X H2005A 16X.018.020 0,46 0,51.265.370 6,73 9,40 Weight.......... 2.8 grams Tape & Reel....... 600/reel Tube............. 45/tube.510 12,95 Patent Pending 429 11X 10,90.235 5,97 16X 0 8.004/0,10 16 Surfaces.600.740 15,2418,80 24X.016 24 SURFACES.075 1,91.420.270 10,67 6,86.035 Mechanicals.500 12,70 16X.018.020 0,46 0,51 7X.235 5,97 Dimensions: Inches Unless otherwise specified, all tolerances are ± mm 24X 11X 429 10,90.620.770 15,75 19,56 24X 0 8 H2019, HX2019 H2006A, H2008.537 13,64 H2006A/2008.370 9,40.004/0,10 16 Surfaces.470.590 11,94 14,99 24X.016 11X.410.300 1 7,62 Patent Pending.245 6,22. 440 11,18 24 SURFACES.035 16X 0 8 Weight......... 1.0 grams Tape & Reel....... 600/reel Tube............. 45/tube 24X 11X =. 440 11,18.490.620 12,45 15,75 24X 0 8 Weight..........2.7 grams Tape & Reel.......300/reel Tube..............25/tube Dimensions: Inches Unless otherwise specified, all tolerances are ± mm Weight.......... 2.4 grams Tape & Reel....... 350/reel Tube............. 35/tube www.pulseeng.com 2 H327.H (8/05)
Dimensions: Inches mm Unless otherwise specified, all tolerances are ± H2014, H2017 Dimensions: Inches mm Unless otherwise specified, all tolerances are ±.595 15,11.016 24X.241 6,12.518 13,16 Mechanicals (continued).732 18,59.429 11X = 10,90 24X 24 SURFACES 1.120 28,45 H2014/H2017 48X.016 24X =.920 23,37 H1180, H1187 1 6 1 480.630 12,19 16,0 48 SURFACES Schematics 16 23X =.920 23,37 48X 48X.045 1,14.610.770 15,49 19,56 11X 429 10,90 0-8.500.660 12,70 16,76 0 8 H2019, HX2019 Weight.......... 1.6 grams Tape & Reel....... 300/reel Tube............. 35/tube Weight......... 5.0 grams Tape & Reel...... 250 /reel Tube............. 15/tube TD+ 1 16 TX1+ 2 5 2 15 TCT 2 15 TXCT 3 4 3 6 14 11 TD- 3 RD+ 6 14 TX1-11 RX1+ 7 10 RCT 7 10 RXCT 8 9 RD- 8 9 RX- www.pulseeng.com 3 H327.H (8/05)
Schematics (continued) H2005A H2006A H2008 23 RXT1 www.pulseeng.com 4 H327.H (8/05)
H2014 H2017 48 RX1+ 48 RX1+ 47 RX1 RD1 2 47 CMR1 46 CMR1 45 CMT1 RCT1 3 TCT1 4 46 RX1-45 TX1+ 44 TX1+ TD1+ 5 44 CMT1 43 TX1 TD1 6 42 TX2 TD2 7 43 TX1- CHANNEL 1 42 TX2- TRANSMIT TD2-7 41 TX2+ TD2+ 8 41 CMT2 Schematics (continued) 40 TX2+ 40 CMT2 39 CMR2 TCT2 9 RCT2 10 TD2+ 9 39 RX2- RD2-10 38 RX2 RD2 11 38 CMR2 37 RX2+ RD2+ 12 www.pulseeng.com 5 H327.H (8/05) 36 RX3+ RD3+ 13 MEDIA SIDE 37 RX2+ CHANNEL 2 36 RX3+ RD2+ 12 RD3+ 13 35 CMR3 RCT3 14 35 RX3 RD3 14 34 RX3 RD3-15 34 CMR3 33 CMT3 RCT3 15 TCT3 16 33 TX3 TD3+ 16 32 TX3+ TD3+ 17 32 CMT3 TCT3 17 31 TX3 TD3 18 31 TX3- CHANNEL 3 30 TX4- For More Information: Worldwide Headquarters 12220 World Trade Drive San Diego, CA 92128 U.S.A. www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 TD3-18 TRANSMIT TD4-19 Northern Europe 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Southern Europe Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 CHIP SIDE China Headquarters No. 1 Industrial District Changan, Dongguan China TEL: 86 769 5538070 FAX: 86 769 5538870 North China Room 1002 No. 819 Nanjing West Rd Shanghai China TEL: 86 21 32181071 FAX: 86 21 32181396 30 TX4 TD4 19 29 CMT4 TCT4 20 29 TX4+ TD4+ 20 28 TX4+ TD4+ 21 28 CMT4 27 CMR4 TCT4 21 RCT4 22 27 RX4- RD4-22 South Asia 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 RCT4 23 26 RX4 RD4 23 26 CMR4 25 RX4+ RD4+ 24 25 RX4+ CHANNEL 4 RD4+ 24 North Asia 3F-4, No. 81, Sec. 1 Hsin Tai Wu Road Hsi-Chih Taipei Hsien Taiwan TEL: 886 2 26980228 FAX: 886 2 26980948 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. Copyright, 2005. Engineering, Inc. All rights reserved.