Molded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026
|
|
- Elisabeth Wood
- 5 years ago
- Views:
Transcription
1 T6L Features Stand-off voltage from 5.0 to 250 volts Glass passivated junction 5000W Peak Pulse Power capability on 10/1000μs waveform repetition rate(duty cycle): 0.05% Fast response time: typically less than 1.0ps from 0v to VBR Low incremental surge resistance, excellent clamping capability High temperature soldering guaranteed: 265 C/10 seconds, 0.375" (9.5mm) lead length at 5lbs. (2.3kg tension) This series is UL recognized under component index. File number E RoHS Compliant Mechanical Data Case: Terminals: Polarity: Mounting position: Weight: Molded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026 Color band denotes the cathode except Bi-directional Any 0.07 ounce, 2.1 grams Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit Conditions PPPM PD Peak Pulse Power Dissipation on 10/1000µs test waveform Steady State Power Dissipation on inifinite heat sink 5000 W IFSM Peak Forward Surge 400 A VF RθJA RθJL TJ,TSTG Maximum Instantaneous Forward Voltage at 100A for Unidirectional only Typical Thermal Resistance Junction to Ambient Typical Thermal Resistance Junction to Lead Operating and Storage Temperature Range 8 W TL= 75 C (Fig. 5) 3.5/5.0 V 40 C/W 8 C/W -55 to 175 C Non-repetitive current pulse, per Fig. 3 and derated above TA=25 C per Fig.2 8.3ms single half sine-wave superimposed on rated load (JEDEC method) VF<3.5V for devices of VBR 200V and VF<5.0V for devices of VBR 201V. TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 6
2 Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Uni-Polar P/N Stand-Off Voltage Breakdown IT Clamping VBR IPPM IT Bi-Polar VWM (ma) (Note3) (V) Min. VC (V) Peak Pulse IPPM (A) Reverse V WM ID (µa) 5KP5.0A 5KP5.0CA KP6.0A 5KP6.0CA KP6.5A 5KP6.5CA KP7.0A 5KP7.0CA KP7.5A 5KP7.5CA KP8.0A 5KP8.0CA KP8.5A 5KP8.5CA KP9.0A 5KP9.0CA KP10A 5KP10CA KP11A 5KP11CA KP12A 5KP12CA KP13A 5KP13CA KP14A 5KP14CA KP15A 5KP15CA KP16A 5KP16CA KP17A 5KP17CA KP18A 5KP18CA KP20A 5KP20CA KP22A 5KP22CA KP24A 5KP24CA KP26A 5KP26CA KP28A 5KP28CA KP30A 5KP30CA KP33A 5KP33CA KP36A 5KP36CA KP40A 5KP40CA Page 2 of 6
3 Uni-Polar P/N Stand-Off Voltage Breakdown IT Clamping VBR IPPM IT Bi-Polar VWM (ma) (Note3) (V) Min. VC (V) Peak Pulse IPPM (A) Reverse V WM ID (µa) 5KP43A 5KP43CA KP45A 5KP45CA KP48A 5KP48CA KP51A 5KP51CA KP54A 5KP54CA KP58A 5KP58CA KP60A 5KP60CA KP64A 5KP64CA KP70A 5KP70CA KP75A 5KP75CA KP78A 5KP78CA KP85A 5KP85CA KP90A 5KP90CA KP100A 5KP100CA KP110A 5KP110CA KP120A 5KP120CA KP130A 5KP130CA KP150A 5KP150CA KP160A 5KP160CA KP170A 5KP170CA KP180A 5KP180CA KP190A 5KP190CA KP200A 5KP200CA KP210A 5KP210CA KP220A 5KP220CA KP250A 5KP250CA Note: 1. Surge current waveform per Fig. 3 and derate per Fig For Bi-directional types with VWM of 10 volts and less, the ID limit is doubled. Page 3 of 6
4 PPPM-Peak Pulse Power (KW) 3. C suffix for Bidirectional use, A suffix for 5% tolerance. Typical Characteristics Curves Fig.1- Peak Pulse Power Rating Curve Peak Pulse Power (PPP) or (IPP) Fig.2- Pulse Derating Curve Pulse Width td (s) Ambient Temperature TA ( C) Fig.3- Pulse Waveform Fig.4- Typical Junction Capacitance CJ Capacitance (pf) IPPM - Peak Pulse, % IRSM Derating in Percentage, % Time t (ms) Reverse Breakdown Voltage VBR (V) Page 4 of 6
5 Steady State Power Dissipation (W) Fig.5- Steady State Power Derating Curve IFSM Peak Forward Surge (A) Fig.6- Non-Repetitive Peak Forward Surge Uni-directional only Lead Temperature TL ( C) Number of Cycles at 60 Hz Marking Information Uni-directional Bi-directional Page 5 of 6
6 Dimensions in inch (mm) How to contact us Case T6L US HEADQUARTERS WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONENTS INCORPORATED TAIWAN, TAIPEI 6F., No.190, Sec. 2, Zhongxing Rd., Xindian Dist., New Taipei City 23146, Taiwan R.O.C. Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA,1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI,200052, CHINA Tel: Fax: CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, , CHINA Page 6 of 6
P6KE6.8A - 600CA. 600W Transient Voltage Suppressor. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) DO-15
Features Glass passivated chip junction 600W peak pulse power capability on 10/1000μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Min. 600W
More informationJEDEC DO-214AB(SMC) molded plastic. Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional
3000W Surface Mount Transient Voltage Suppressor 3000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 220 volts Glass passivated junction Excellent clamping capability
More informationZ1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
More informationSymbol Description Value Unit Conditions. Minimum See Table 200 A. SMCJ100~SMCJ440 Operating Junction and Storage Temperature Range
Features Stand-off voltage from 5.0 to 440 volts Glass passivated junction 1500W peak pulse power capability with a 10/1000μs waveform, repetition rate(duty cycle): 0.01% Fast response time: typically
More information5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
More informationTransient Voltage Suppressor
Features: Glass Passivated Junction Low Incremental Surge Resistance, Excellent Clamping Capability Low Profile Package With Built-In Strain Relief for Surface Mounted Applications 600W Peak Pulse Power
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd 20KP Series 20KW Transient Voltage Suppressor Rev.2.3 DESCRIPTION: The 20KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection
More informationSMAJ SERIES. Surface Mount Transient Voltage Suppressor Diodes
Surface Mount Transient Voltage Suppressor Diodes Features Low profile package Ideal for automated placement Glass passivated chip junction High forward surge capability Available in uni-directional 400
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
More information1.5KE SERIES. Transient Voltage Suppressor Diodes
RoHS COMPLIANT Transient Voltage Suppressor Diodes Features Excellent clamping capability Low dynamic impedance Solder dip 275 C max. 7 s, per JESD 22-B106 Mechanical Data Package: DO-201AE Molding compound
More informationSMF5.0-SMF170A SMF5.0-SMF170A
SMF5.0-SMF170A TRANSIENT VOLTAGE SUPPRESSOR Features: For surface mounted applications in order to optimize board space Low profile space Glass passivated chip Low inductance Excellent clamping capability
More informationTransient Voltage Suppressor
Features: Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationBZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More informationMETAL STRIP CHIP RESISTOR UlTRA LOW VALUE RM1206~RM2512
METAL STRIP CHIP RESISTOR UlTRA LOW VALUE RM1206~ Metal Strip Chip Resistor Ultra Low Value Features Ultra low resistance range from 0.5 to 20 m ohm High power rating up to 3 watt Low T.C.R down to ±50ppm/
More informationSurface Mount 18,000 W Transient Voltage Suppressor
MPLAD18KP7.0A MPLAD18KP200CA Datasheet Surface Mount 18,000 W Transient Voltage Suppressor Released June 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Features...
More informationSurface-Mount 36,000 W Transient Voltage Suppressor
Surface-Mount 36,000 W Transient Voltage Suppressor 1 Product Overview These high-power, 36 kw rated transient voltage suppressors in a surface-mount package are provided with design features to minimize
More informationCZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
More informationSMAJ SERIES 400 Watts Suface Mount Transient Voltage Suppressor SMA/DO-214AC. RoHS. Features
Pb RoHS COMPLIANCE creat by art SMAJ SERIES 4 Watts Suface Mount Transient Voltage Suppressor SMA/DO-214AC Features UL Recognized File # E-326243 Low profile package Built-in strain relief Glass passivated
More informationMPLAD36KP14A MPLAD36KP400CA
Available Surface Mount 36,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 36 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationMCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
More informationSurface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
More informationMCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
More informationMPLAD18KP7.0A MPLAD18KP200CA
Available Surface Mount 18,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 18 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationSilicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
More informationSingle-Phase 6.0A Glass Passivated Bridge Rectifier
0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More information1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
More informationBAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
More informationACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power
More informationSMF5.0A thru SMBJ190CA
Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 200W Working Voltage 5.0 to 190V SMF5.0A thru SMF190CA Features Glass passivated chip Uni and Bidirectional unit Excellent clamping
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd Rev.4.0 FEATURES 620 Watts peak pulse power per line (tp=8/20µs) Protects two line pairs Low clamping voltage Low operating voltage RoHS compliant MAIN APPLICATIONS SOP-8
More informationSMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5.0 to 170 Volts 600 Watts Peak Power
SMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5. to 17 Volts 6 Watts Peak Power Features SMB/DO-214AA For surface mounted application Low profile package Built-in strain relief Glass
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd SRV05 4B TVS Diode Array Rev.1.0 FEATURES: Protects four I/O lines Low clamping voltage Low operating voltage Low capacitance RoHS compliant MAIN APPLICATIONS SOT23-6L
More information500 W, Bidirectional Low Capacitance TVS Array
Available 500 W, Bidirectional Low Capacitance TVS Array DESCRIPTION This Transient Voltage Suppressor (TVS) is assembled in a QFN-143 package which has the same pinout and footprint as the SOT-143 package.
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd AK Series 6A Transient Voltage Suppressor Rev.2 DESCRIPTION: The AK6 series of high current bi-directional transient suppressors are designed for A.C. line protection and
More informationCHENMKO ENTERPRISE CO.,LTD
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE.V TO 9V MMPZBGP THRU MMPZBGP FEATURE * High temperature soldering type. * ESD rating of class (> kv) per human
More informationTransient Voltage Suppressors. AK3 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Suppressors K3 Series Transient Suppressors - K3 Series Features Very low clamping voltage Ultra compact: less than one-tenth the size of traditional discrete solutions Sharp breakdown
More information2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
More informationSF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More information1 A Low Dropout Positive Voltage Regulator LD1117A. 1A Low Dropout Positive Voltage Regulator. General Description. Features. Applications SOT-223
1 A Low Dropout Positive Voltage Regulator 1A Low Dropout Positive Voltage Regulator General Description is a three terminal low dropout positive voltage regulator with a dropout of 1.15V at 1A output
More informationCM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
More informationMCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd JEUSR70 Low Capacitance TVS Diode Array Rev.1.2 FEATURES: Protects two I/O lines Low clamping voltage Array of surge rated, low capacitance diodes Solid-state silicon-avalanche
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More informationM3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
More information500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
More information500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
More informationSMF Transient Voltage Suppressor Diode Series
SMF Transient Voltage Suppressor Diode Series General Information The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More informationtechnický list 1N5333B through 1N5388B 5 Watt Surmetic 40 Silicon Zener Diodes TECHNICAL DATA str 1
Dodavatel: GM electronic, spol. s r.o., Křižíkova 77, 86 Praha 8 zákaznická linka: 84 6 7 technický list TECHNICAL DATA Watt Surmetic 4 Silicon Zener Diodes This is a complete series of Watt Zener Diodes
More informationMaximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 0 mw DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 0 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes Specification
More informationAlfa-MOS Technology. AFE0563 One-Line ESD Protection Low Capacitance Bi-direction TVS. General Description. Pin Description ( DFN )
General Description are designed by bi-direction TVS diode, to protect high speed data interfaces. This product has been specifically designed to protect sensitive components which are connected to data
More informationSMBJ SERIES SMB SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS
LITE-ON SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS STAND-OFF VOLTAGE - 5.0 to 350 Volts POWER DISSIPATION - 600 WATTS FEATURES For surface mounted applications Reliable
More informationELECTROSÓN. 1N53 Series. 5 Watt Surmetic 40 Zener Voltage Regulators
5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide
More informationSPE6V8UN Ultra Low Capacitance 2 -Line ESD Protection Array
DESCRIPTION The is 2-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic
More informationSMBJ5.0A thru SMBJ188A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V P PPM 600 W I FSM (uni-directional only) A T J max. 150 C DEVICES FOR BI-DIRECTION
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More informationPAM2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications from the damaging effects of Electrostatic Discharge (ESD)
More informationTESDC24V Taiwan Semiconductor
Bi-directional TVS Diode Array FEATURES - Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) 6 - Meet IEC61-4-4 (EFT) rating. A (5/5ns) 3 - Protects one Bi-directional I/O line 5 - Working Voltage : 24V
More informationPESD2CAN CAN BUS ESD PROTECTION DIODE DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
CAN BUS ESD PROTECTION DIODE DESCRIPTION The is designed to protect Controller Area Network (CAN) bus lines and other industrial applications such as DeviceNet Bus lines from the damaging effects of Electrostatic
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 1500 W P D 6.5 W I FSM (uni-directional
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationBi-directional ESD Protection Diode
// Bidirectional ESD Protection Diode FEATURES Meet IEC642 (ESD) ±k (air), ±8k (contact) Designed for mounting on small surface Protects one Bidirectional I/O line Moisture sensitivity level 1 Working
More informationCP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
More informationBi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationTSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40 A
More information2 Anode. Parameter Symbol Value Units. Max Reverse Leakage Current V IZT IZT IZK VR Nom. V Min. V Max.
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4~33 Volt POWER 25 mwatt FEATURES.42(.5).37(.95) Planar Die construction 25mW Power Dissipation Zener Voltages from 2.4~ Ideally Suited for Automated Assembly
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD 323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More informationL03ESDL5V0CG3-2 SOT-523. STAND-OFF VOLTAGE Volts POWER DISSIPATION - 30 WATTS GENERAL DESCRIPTION FEATURES APPLICATION MECHANICAL DATA
LITE-ON SEMICONDUCTOR BIDIRECTIONAL ESD PROTECTION DIODE STAND-OFF VOLTAGE - 5.0 Volts POWER DISSIPATION - 0 WATTS GENERAL DESCRIPTION The is designed to protect sensitive electronics from damage or latch
More informationTransient Voltage Suppressor, Unidirectional
Transient Voltage Suppressor, Unidirectional FEATURES: Equivalent Industry Standard Part Numbers Designed For MIL-STD-704 28 Volt Power Supply Protection Can be supplied with JAN/JANTX parts This series
More informationApplications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
More informationWPE0541P1 1-Line Bi-directional Low Capacitance TVS Diode
Description Mechanical Characteristics The is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time,
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationSingle-Line ESD Protection Array
DESCRIPTION The are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a
More informationUM5304EEBF. Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5304EEAF SC70-6/SC88/SOT363 UM5304EEBF SC89-6/SOT563/SOT666 UM5304EECF TSOP-6/SOT23-6 General Description UM5304EEXF are surge rated diode arrays designed
More information2-Line ESD Protection Array
DESCRIPTION The SPE0532 are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space
More informationP1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationSPE6V8UH Ultra Low Capacitance 4 -Line ESD Protection Array
DESCRIPTION The SPE6V8UH is 4-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
More informationUM5204EEBF. Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EEBF SC89-6/SOT563/SOT666 UM5204EECF TSOP-6/SOT23-6 General Description are surge rated diode arrays designed to protect
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More informationUM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
More informationLow-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection
ESD5B5CL Low-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection The ESD5B5CL is designed with Leiditech Punch-Through process TVS technology to protect voltage sensitive components
More informationMCC. Revision: E 2014/02/26 1N5338B THRU 1N5388B. Features. 5 Watt Zener Diode 5.1 to 200 Volts. Maximum Ratings:
Features Zener Voltage From 5.V to 00V Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level Lead Free Finish/RoHS Compliant (Note) ("P"Suffix designates Compliant. See ordering information)
More informationSurface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
More informationMetal Oxide Varistor:TVB Series
Features. RoHS compliant 2. Available for SMT flow/reflow soldering 3. Low profile and space saving 4. Large capability to withstand high surge current 5. Low inductance construction with excellent response
More informationDescription. Features. Continuous RA8 Series RA16 Series RA22 Series Units. ) 4 to to to 275 V DC Voltage Range (V M(DC)
RA Varistor Series RoHS Description The RA Series transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for
More informationPLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
More information