MDCG MDCL MDCT-Plug MDCT-Cable With integrated electronics Probe, ball joints, loose push rod (loose core) Measuring strokes from 2 to 0 mm Cable or plug connection Supply voltage ± 1 V or 24 V Output signals: 0.. V / ± V / 0.. V / ± V / 0.. ma / 4.. ma Protection grade IP6 (optional IP67/68) The MDC series consists of three designs: MDCG with ball joints, MDCT as a probe with spring return and MDCL with a loose push rod. Electrical Data MDC-2 MDC- MDC- MDC- MDC-0 MDC-0 MDC-0 MDCG (ball joints) in mm 1.) MDCL (loose core) in mm 1.) MDCT (as a probe) in mm 1.) Independent linearity (best straight line) 1.) Output signal Limit frequency ±1 (2) ±2, () ± () ± () ±2 (0) ±0 (0) -- ±1 (2) ±2, () ± () ± () ±2 (0) ±0 (0) ±1 (2) ±2, () ± () ± () ±2 (0) -- -- ±0,% (±0,2%) ±1% 0.. V / ± V / 0.. V / ± V / 0.. ma / 4.. ma 0 Hz Supply voltage 24 V (± %) / ±1 V (± %) Power consumption (no load) Output load Temperature coefficient Ripple Mechanical Data, Environmental Conditions, Miscellaneous Operational temperature Storage temperature Protection grade (IEC6029) Vibration (IEC 68-2-6, Test Fc) Shock (IEC 68-2-27, Test Ea) ± / ma (±40 / 40 ma @ current output) > kohm (voltage output) / <00 Ohm (current output) ±0,4 % F.S./K < mv RMS ±0 (0) MDC-2 MDC- MDC- MDC- MDC-0 MDC-0 MDC-0 0..+70 C (MDCG) / 0..+60 C (MDCT und MDCL) -30..+80 C IP6 (optional IP67 / IP 68 for MDCG and MDCL) g (2..00 Hz) 0 g, 2 ms Sensor length MDCG 76 mm 87 mm 1 mm 140 mm 18 mm 3 mm -- Sensor length MDCL 76 mm 87 mm 1 mm 140 mm 18 mm 327 mm 497 mm Sensor length MDCT 76 mm 87 mm 1 mm 140 mm 18 mm -- -- Mass MDCG (cable 1 m ca.) 1 g 180 g 198 g 24 g 30 g g -- Mass MDCL (cable 1 m/plug ca.) 1/6 g 12/0 g 11/12 g 21/190 g 280/2 g 480/4 g 7/68 g Mass MDCT (cable 1 m/plug ca.) 130/1 g 14/130 g 16/14 g 21/19 g 28/26 g -- -- Material housing Material push rod / Core material Electrical connection Mounting parts (included in delivery) Steel nickel plated Stainless steel / Nickel-Iron-Alloy Round cable 1 m / plug -pin (not for MDCG) 2 pc. ball joints (MDCG), probe (MDCT), loose push rod (MDCL) 1.) According IEC 60393 2.) Determined by climatic conditions according to IEC 68-1, para..3.1 without load collectives Tel.: +49 89 46094-0 Fax: +49 89 46094-1 www.megatron.de info@megatron.de Date: 0/07/18 Page: 1 of
Order Code Description Series: Design: With ball joints With loose core As a probe : Option 2 mm mm mm mm 0 mm Option 0 mm (not version T) Option 0 mm (only version L) Electrical connection: Plug -pole (not version G) Cable 1 m Option cable 2 m Option cable length in m Supply voltage ±1 V 24 V Output signal: 0.. V 0.. V ± V 0.. ma 4.. ma Option ± V Independent linearity: ±0,% / ±1% (depends on electrical travel) Option ±0,2 (not for 0 mm) Protection class: Standard IP6 Option IP67 (not for version T) Option IP68 (not for version T) Selection: standard=black/bold, possible options=grey/cursive MDC G L T 2 0 0 0 S K K2,00 Kx,xx 1 24 0 42 11 - L0,2 - IP67 IP68 Accessory (not included in delivery): Mating connector -pole straight IP67 Mating connector -pole angled IP67 Mounting brackets Mounting flange Extension for armature (0..20 mm) For higher quantities or on-going demand, additional options are available as described below on request For example: Cable assemblies with and without connector Special probe, special axis length and much mores Extended temperature range (-2 C.. +8 C) Please note for the type with >0 mm displacement: For a horizontal installation, the sensor housing must be stabilized additionally. An axial alignment must be ensured. Otherwise the sensor could bend due to its own weight! We recommend to use 3 mounting brackets. Tel.: +49 89 46094-0 Fax: +49 89 46094-1 www.megatron.de info@megatron.de Date: 0/07/18 Page: 2 of
MDC G Measurement range Standard 1 m Color of cable Supply voltage ±1 V Supply voltage 24 V Yellow - 1 V N.C. Brown + 1 V + 24 V White Signal GND Green Output Grey Excitation GND Sensor MDC G MDC G MDC G MDC G MDC G MDC G [elec. zero position ±1, mm] 161 mm 169, mm 180 mm 216 mm 277 mm 433 mm 76 mm 87 mm 1 mm 140 mm 18 mm 3 mm Stroke ±1 mm ±2, mm ± mm ± mm ±2 mm ±0 mm Tel.: +49 89 46094-0 Fax: +49 89 46094-1 www.megatron.de info@megatron.de Date: 0/07/18 Page: 3 of
MDC L cable version M2, 6 7, MDC L connector version M2, + 6 Pin number Color of cable Supply voltage ±1 V Supply voltage 24 V 1 Yellow - 1 V N.C. 2 Brown + 1 V + 24 V 3 White Signal GND 4 Green Output Grey Excitation GND Sensor MDC L MDC L MDC L MDC L MDC L MDC L MDC L [elec. zero position ±1, mm] 9 mm 11, mm 1 mm 18 mm 32 mm 81 mm 116 mm 76 mm 87 mm 1 mm 140 mm 18 mm 327 mm 497 mm 17 mm 23 mm 30 mm 62 mm 80 mm 130 mm 230 mm Stroke ±1 mm ±2, mm ± mm ± mm ±2 mm ±0 mm ±0 mm Tel.: +49 89 46094-0 Fax: +49 89 46094-1 www.megatron.de info@megatron.de Date: 0/07/18 Page: 4 of
MDC T cable version Measurement range 4 8 L max. M *) 7, MDC T connector version + 8 Pin number Color of cable Supply voltage ±1 V Supply voltage 24 V 1 Yellow - 1 V N.C. 2 Brown + 1 V + 24 V 3 White Signal GND 4 Green Output Grey Excitation GND Sensor MDC T MDC T MDC T MDC T MDC T M [elec. zero position ±1, mm] 26 mm 23, mm mm 16, mm 40 mm 76 mm 87 mm 1 mm 140 mm 18 mm 4 mm 4 mm 4 mm 4 mm 83 mm L max 30, mm 30, mm 30, mm 30, mm 69, mm Stroke ±1 mm ±2, mm ± mm ± mm ±2 mm Tel.: +49 89 46094-0 Fax: +49 89 46094-1 www.megatron.de info@megatron.de Date: 0/07/18 Page: of