Technical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B
|
|
- Leo Gibbs
- 6 years ago
- Views:
Transcription
1 Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories Housing can be coated as an option (Hart Coat) Rust and acid-resistant measuring cable PROFINET interface Free of wear magnetic sampling Description Flexible cable pull rotary encoder designed to meet tough requirements in all fields of application. R Technical data General specifications Detection type Device type Measuring range Construction type Resolution Functional safety related parameters B 0d Electrical specifications Operating voltage U B V DC No-load supply current I 0 typ. 3 ma Power consumption P 0 approx. W Time delay before availability t v < 0 ms Output code binary code Code course (counting direction) adjustable Interface Interface type PROFINET IO Transfer rate 00 MBit/s Connection Connector magnetic sampling Premium Line with PROFINET interface mm 80 mm, 30 mm, 90 mm Cable pull: Design 80 mm: 0,0 mm Design 30 mm: 0,0 mm Design 90 mm: 0,09 mm Encoder: Bit (3 Bit/revolution) Ethernet : x M x socket, -pin, D-coded ; supply : M x connector, -pin, A-coded Standard conformity Degree of protection DIN EN 09, IP Climatic testing DIN EN , no moisture condensation Emitted interference EN 000--:007 Noise immunity EN 000--:00 Ambient conditions Ambient temperature C ( F) Operating temperature C ( F) Storage temperature C ( F) Relative humidity 98 %, no moisture condensation Mechanical specifications Rope diameter.3 mm Bending radius min. 7 mm Breaking force min. 7 N Material Cable pull anodized aluminum or aluminum with Hart Coat coating Rotary encoder housing: nickel-plated steel Flange: aluminum Flange aluminum Rope Stainless steel.0/3 Life span up to 0 Cycles Release date: :9 Date of issue: t83_eng.xml USA: Germany: Singapore:
2 Dimensions Details of variable specifications of desgins and measuring length see chapter Variable Data and Dimensions Measuring cable attachment Measuring cable attachment Servo flange ø 8 C M8 D B* A* E D 8 *depending on measuring length A ~ 0 ø 9 ø 9 ø 0 C ø 0 ø ~ 0 0 ø 0 Release date: :9 Date of issue: t83_eng.xml USA: Germany: Singapore:
3 For design 30/90 ø.8 ø 3.7 ø.8 ø 38 ø 9.7 For design 30/90 ø Release date: :9 Date of issue: t83_eng.xml ø 3. USA: Germany: Singapore:
4 For design 30/ R 8 ø x 8 ø R 8 ø 3.7 ø 38 x (x) 8. ø 0 Release date: :9 Date of issue: t83_eng.xml USA: Germany: Singapore:
5 For design 30/90 Release date: :9 Date of issue: t83_eng.xml USA: Germany: Singapore:
6 Electrical connection Pin Male connector M x, -pin, A-coded Female connector M x, -pin, D-coded Supply voltage +U B Tx + - Rx V Tx - - Rx Variable Data and Dimensions Technical Data Design 80 Design 30 Design 90 Max. measuring length (in m) Drum size (incl. cable) (in mm) 00 33, 9, Retraction speed (in m/s) Spring retraction force (in N) Weight (in kg) 0,9,,, 3, 7, 8, 0,, Dimensions (in mm) A B C D E 3, 79 Measuring Cable Attachments Dimensions (in mm) Design 80 Design 30/design 90 Attachment Length Width/Ø Length Width/Ø Bellows 9.7 / Brush attachment with bellows and steel tip Guide pulley Double guide pulley Design 80/30/90 Length 8 Brush attachment + guide pulley 08. Indicators Release date: :9 Date of issue: t83_eng.xml USA: Germany: Singapore:
7 Diagnostic LEDs LED Color Description for LED = ON Active Yellow Incoming and outgoing data traffic for port Link* Green Connection to other Ethernet devices on port Active Yellow Incoming and outgoing data traffic for port Link* Green Connection to other Ethernet devices on port Stat Green Status, details see table below Stat Red Status, details see table below * flashes with Hz if engineering identification call is activated and link connection is available Stat (green) Stat (red) bus failure Meaning off off No power on on No connection to another device Criteria: no data exchange on flashes ) Parameterization fault, no data exchange Criteria: data exchange correct. However, the slave did not switch to the data exchange mode. on off Data exchange. Cause bus disconnected Master not available / switched off Slave not configured yet or wrong configuration Wrong station address assigned (but not outside the permitted range) Actual configuration of the slave differs from the nominal configuration Slave and operation ok. ) flashing frequency 0. Hz for at least 3 seconds Model Number E C A 3 0 P L - - B 7 B P Release date: :9 Date of issue: t83_eng.xml Connection type BP Sockets/ plug M x Electrical interface B7 ProfiNet Material A STD anodized aluminum H Aluminum, Hart Coat coating Attachment Bellows with steel tip Brush attachment with bellows and steel tip Guide pulley Double guide pulley 8 + Cable mounts A Ring PE carrier C Ball joint Length of measuring cable 0-0 See table "Variable Data and Dimensions" USA: Germany: Singapore:
Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationEncoder WDGA 58E PROFINET-IO (cov)
Encoder WDGA 58E PROFINET-IO (cov) www.wachendorff-automation.com/wdga58epnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationEncoder WDGA 58A PROFINET-IO (cov)
Encoder WDGA 58A PROFINET-IO (cov) www.wachendorff-automation.com/wdga58apnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationEncoder WDGA 58F PROFINET-IO (cov)
Encoder WDGA 58F PROFINET-IO (cov) www.wachendorff-automation.com/wdga58fpnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationABSOLUTE ROTARY ENCODER MODBUS/TCP
Main Features - Compact and Heavy-Duty Industrial Model - Communication via Standard Protocols - Integrated Web Server - Interface: Modbus/TCP - Housing: 58 mm - Full shaft: 6 or 10 mm / Hub Shaft 15 mm
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationJUMO PINOS L01. Calorimetric flow sensor. Brief description. Special features. Customer benefits. Data Sheet
sales@jumo.co.uk info.us@jumo.net Page 1/9 JUMO PINOS L01 Calorimetric flow sensor Brief description The JUMO PINOS L01 flow sensor serves the measuring and monitoring of flow velocities of water and aqueous
More informationC-DIAS EtherNet/IP Slave CIP 022
C-DIAS-ETHERNET/IP SLAVEMODUL CIP 022 C-DIAS EtherNet/IP Slave CIP 022 The C-DIAS EtherNet/IP CIP 022 slave module is an interface module between the C-DIAS control system and EtherNet/IP bus. Technical
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationMHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER
MHK5 SERIES PROFINET ABSOLUTE MULTI -TURN ENCODER Features Robust and compact design Blind shaft version. 15mm standard ID with options down to 6mm ID Precision ball bearings with sealing flange High temperature
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationLVX Control Unit. Features:
Date 2013-02-28 Control Unit Features: Most parameters can be defined as required for your interfaces. You decide which information is output and how. Fast cycle times, just a few µs/beam. Maximum beam-count
More informationTemposonics. R-Series Profibus. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm
R-Series Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Measuring length 5-7600 mm Advanced Communication... offers Multi-Position Measurement Rugged Industrial Sensor
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationTemposonics. R-Series Profibus. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Stroke length mm
Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Stroke length 25 7600 mm Advanced Communication offers Multi-Position Measurement Rugged industrial sensor Linear and absolute
More informationFL SWITCH SFN 5TX. Extract from the online catalog. Order No.:
Extract from the online catalog FL SWITCH SFN 5TX Order No.: 2891152 Ethernet switch, 5 TP RJ45 ports, automatic detection of data transmission rate of 10 or 100 mbps (RJ45), autocrossing function Commercial
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationDimensions. Model Number. Electrical connection emitter. Features. Electrical connection receiver. Product information. Pinout OBE12M-R100-S2EP-IO-V31
OBEM-R00-SEP-IO-V Dimensions. 8.7. 7..9. M (x).. ø... 0 9.9 7. 7. Release date: 08-06-08 :0 Date of issue: 08-06-08 80998_eng.xml Model Number OBEM-R00-SEP-IO-V Thru-beam sensor with -pin, M8 x connector
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationLinear Position Transducer HLT 1000-R2
7 Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More informationDistance and Position Sensors
Distance and Position Sensors SENSORS FOR DISTANCE AND POSITION Using various measuring techniques, HYDAC offers different distance and position sensors for a wide array of mobile and stationary applications.
More informationDATA SHEET ABSOLUTE OPTICAL ROTARY ENCODER ETHERNET POWERLINK
Main Features - Compact Industrial Model - Communication via Ethernet Powerlink V2 - Interface: Ethernet - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm - Max. 65536 Steps per Revolution (16
More informationPROFIsafe over PROFINET
PROFIsafe over PROFINET Specifications Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance thanks to the robust mechanical design SIL2 and Performance
More informationTemposonics. R-Series POWERLINK. Absolute, Non-Contact Position Sensors. Temposonics RP and RH Measuring length mm
Temposonics Absolute, Non-Contact Position Sensors R-Series Temposonics RP and RH Measuring length 25-7600 mm For short cycle times Real Time Measurement Rugged Industrial Sensor Linear and Absolute Measurement
More informationVersaMax IP I/O Module
Module accepts four digital input signals and provides four digital outputs. It connects to a local bus that is interfaced to a Profibus-DP / PROFINET network by a Profibus Interface Unit (IC677PBI001)
More informationInclination sensors 1-dimensional, measuring range
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
More informationVersaMax IP Input Module
Module is used to accept digital input signals. Module Specifications Housing dimensions (width x height x depth) Connection style Operating temperature Storage temperature Operating/storage humidity 60mm
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
More informationArticle no. BWU2045: AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input 1.23 NC
Safety + standard I/O in one module AS-i Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category
More informationLinear Position Transducer HLT 1000-R2
Linear Position Transducer HLT 1000-R2 Description: The sensor works on the principle of magnetostriction. This measuring principle determines with high accuracy the position, distance and/or speed and
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationImmersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
More informationDuct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 QFM4160 AQF4150 Symaro Duct Sensors for relative humidity and temperature with calibration certificates QFM41 Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 420 ma for
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
More informationOptical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationAbsolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 DE Date: 22.06.2017 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
More informationIntelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc.
Intelligent Positioning Drive GEL 6111 CANopen, PROFIBUS DP, Ethernet etc. Technical Information Version 11.10 Features Nominal torque 5 Nm Self-locking system for wear-free holding torque On-board controls
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
More informationAbsolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 BE Date: 13.11.2015 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
More informationB. AVM321S/AVM322S: 1000N Actuator with analog SUT positioner
GB Product Data Sheet 99.70.06-B AVM321S/AVM322S: 1000N Actuator with analog SUT positioner Areas of use For actuation of 2- and 3-way valves. For controllers with constant output (0...10 V / 4...20 ma)
More informationHa-VIS mcon 3000 Next Generation Introduction and features
Ha-VIS Next Generation Introduction and features Ha-VIS Next Generation es, managed, for mounting onto top-hat mounting rail in control cabinets General Description Features The fully Managed es of the
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationTechnical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface
Release date: 0--9 07:6 Date of issue: 0-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationDF PROFI II PC/104-Plus
DF PROFI II PC/104-Plus Installation Instructions V1.4 23.09.2009 Project No.: 5302 Doc-ID.: DF PROFI II PC/104-Plus COMSOFT d:\windoc\icp\doku\hw\dfprofi ii\installation\pc104+\version_1.4\df profi ii
More informationInclination sensors 2-dimensional, measuring range up to ±90
Features Size 52 mm MEMS capacitive measuring principle EN13849 compliant firmware E1 compliant design Interface CANopen, SAE J1939, Analog Connection M12 and cable Protection up to IP 69K Optional GIM500R
More informationDATA SHEET ABSOLUTE MAGNETIC ROTARY ENCODER HEAVY DUTY SAE J1939
POSITAL absolute magnetic rotary encoders are available with interface. These heavy duty encoders are designed for mobile machinery and other demanding environments. An IP69K environmental rating results
More informationStandardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 24 Low-cost draw-wire displacement sensors wiresensor MK analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationDigital electropneumatic positioner
Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationBNI PNT Z015. IP67 Modules 16 Input User s Guide
BNI PNT-104-105-Z015 IP67 Modules 16 Input User s Guide Content 1 Notes 3 1.1. About this guide 3 1.2. Structure of the guide 3 1.3. Typographical Conventions 3 Enumerations 3 Actions 3 Syntax 3 Cross-references
More informationEncoder WDGA 58B CANopen
Encoder WDGA 58B CANopen www.wachendorff-automation.com/wdga58bcan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationPosition Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
More informationTechnical data. General specifications. Indicators/operating means
Release date: 08-0-08 0:7 Date of issue: 08-0-09 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service
More informationGAT NET.Controller 7000 Control unit for the GAT NET.Lock 7000
GAT NET.Controller 7000 Control unit for the GAT NET.Lock 7000 Application The (master controller) and S 7000 (slave controller) control units are used to connect and control the GAT NET. Lock 7000 electronic
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8692 can be combined with Compact stainless steel design Graphic display with backlight Easy start-up Comprehensive
More informationXPSMCMCO0000EM Modbus TCPIP diagnostic expansion module with screw term
Characteristics Modbus TCPIP diagnostic expansion module with screw term Main Range of product Product or component type Device short name [Us] rated supply voltage Complementary Power dissipation in W
More informationECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information
Product Information ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing Suited for safety-related applications up to SIL 3 when coupled with additional measures 09/2018 ECI 1319,
More informationJUMO mtron T Measuring, Control, and Automation System
sales@jumo.co.uk info.us@jumo.net Data Sheet 705040 Page 1/8 JUMO mtron T Measuring, Control, and Automation System Router module Brief description The router module is used to achieve decentralization
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Ethernet Non removable end cap delivered with cable Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Ethernet - TCP/IP and MODBUS TCP communication
More informationStatus display unit with P-bus connection
8 917 DESIO TM I/O modules with P-bus connection PHM1.36TL for connections to automation stations with P-bus for status indication of up to 24 messages for remote control of up to 12 operating points in
More informationPSI-MODEM-SHDSL/SERIAL
PSI-MODEM-/SERIAL -SERIAL permanent line modem Data sheet 104460_en_02 PHOENIX CONTACT 2011-12-06 1 Description The industrial SERIAL permanent line modem enables broadband networking of serial devices
More informationSITOP in the SIMATIC Design
Siemens AG 2017 /2 Introduction /3 1-phase, 24 V DC (for S7-300 and ET 200M) /9 1-phase, 24 V DC (for S7-1200) /11 1-phase, 24 V DC (for S7-1500 and ET 200MP) /14 3-phase, 24 V DC (ET 200pro) Siemens KT
More informationFLM DI 8 M12. Function. Fieldline Modular Device With Eight Digital Inputs. Data Sheet
Fieldline Modular Device With Eight Digital Inputs Data Sheet 697000 02/2004 This data sheet is only valid in association with the FLS FLM SYS INST UM E user manual or the user manual for your bus system
More informationVARAN Splitter PROFINET VSP 044
VARAN SPLITTER PROFINET VSP 044 VARAN Splitter PROFINET VSP 044 With its 3 VARAN Out ports, the VARAN VSP 044 splitter module allows a VARAN bus system to be configured in a tree structure. The VARAN Out
More informationBNI PNT Z015. IP67 Modules 4 IO-Link/In-/Outputs,12 In-/Outputs User s Guide
BNI PNT-502-105-Z015 IP67 Modules 4 IO-Link/In-/Outputs,12 In-/Outputs User s Guide Content 1 Notes 3 1.1. About this guide 3 1.2. Structure of the guide 3 1.3. Typographical Conventions 3 Enumerations
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationTechnical Information Fieldgate SFG500
TI00029S/04/EN/10.16 71324508 Products Solutions Services Technical Information Fieldgate SFG500 Smart Ethernet/PROFIBUS gateway Parallel access to PROFIBUS networks Monitoring of PROFIBUS and HART device
More informationBNI PNT Z015 BNI PNT Z015 BNI PNT Z015 BNI PNT Z015. IP67 Modules User s Guide
BNI PNT-104-105-Z015 BNI PNT-202-105-Z015 BNI PNT-302-105-Z015 BNI PNT-305-105-Z015 IP67 Modules User s Guide Content 1 Notes 3 1.1. About this guide 3 1.2. Structure of the guide 3 1.3. Typographical
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationAS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input
Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category IP20
More informationMore Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 22 Low-cost draw-wire displacement sensors wiresensor MK88 analog - Robust plastic housing - Customized versions for OEM - Potentiometer, current
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More information