Circumferential Seams Device Imagine the configuration for your welding tasks individually With low cost enables the rotary table to expand, through to semi-automatic machines with stand for welding torch. Here are some examples of our most frequently used combinations. Product video at www.javac.org Or on our YouTube chanel! All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page /3
Circumferential Seams Device PRO/8-SR60: with PLC control: PRO/8-ST60: with PLC control: PRO/8-LT60: with PLC control: PRO/8-LR60: with PLC control: PRO/8-VSTH0: with PLC control: All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page /3
Circumferential Seams Device TE-CAL50 Linear slide (50 mm) Connection: 50 mm TE-CAL75 TE-CAL00 Linear slide (75 mm) Connection: 75 mm Linear slide (00 mm) Connection: 00 mm -axisgear rack with handwheel (00 mm) TE-C -axis-clamp holder (PVC) for MIG-/TIG torch TE-XYR X-Range: 00 mm Y-Range: 00 mm TE-C -axis-clamp holder (Bakelite) for TIG SR-8 & 6 TE-L75 Support (75 mm) Stroke: 75 mm COM Turntable control series (here COM800) TE-L00 Support (00 mm) Stroke: 00 mm Pro /3 Turntable PL-R Support block for 5 80 mm AM AA AA 5/-Way compressed air valve 5/ magnet valve single 5/ magnet valve double PL-300 L PL-600 L PL-000 L Aluminium base frame (with dovetail guide) Max. workpiece length: 300 mm Total length of rail:.040 mm (with: LR-Series) Aluminium base frame (with dovetail guide) Max. workpiece length: 600 mm Total length of rail:.340 mm (with: LR-Series) Aluminium base frame (with dovetail guide) Max. workpiece length:.000 mm Total length of rail:.740 (with: LR-Series) PL-T FS- SPS Base frame mounting of: TE-XYR or TE-L Footswitch Start/Stop SPS Multifunctional control PROA-6 PROA-56 PROA-06 PL-CL00 Pneumatic-tailstock Connection: 00 mm Constant centring taper Drm.: 5-6 mm Constant centring taper Drm.: 8-56 mm Constant centring taper Drm.: 53-06 mm PL-500 L Aluminium base frame (with dovetail guide) Max. workpiece length:.500 mm Total length of rail:.40 mm (with: LR-Series) PL-000 L PL-500 L Aluminium base frame (with dovetail guide) Max. workpiece length:.000 mm Total length of rail::.740 mm (with: LR-Series) Aluminium base frame (with dovetail guide) Max. workpiece length:.500 mm Total length of rail:.830 mm (with: LR-Series) Also available with PC control All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 3/3
Modular System PRO/8-ST60 Sample configuration PRO/8-ST60 7 3 4 8 Model PRO/8-ST60 6 Supply voltage Hollow shaft Table diameter AC 30V/50Hz/3A DC 90V/50W 60 mm 340 mm Tilt angle 0 90 Welding current 300A/ 00% Rotating speed Load capacity Torque Rotating direction Overlap timer (fixation point) Timer (fixation point) Time control (fixation point) Start/crater filling Brake 0,6 6 rpm 00 kg 65 kg/cm cw/ccw 0 999 sec. magnetic HF-protection 00% Start Weight Foot switch (M) 8 kg Item no. 78066.030 TE-C 5 9 -axis-clamp holder (PVC) for MIG/TIG torch TE-CAL50 Linear slide (50 mm); connection 50 mm 3 TE-XYR -axis-gear rack with handwheel (00 mm); X/Y-range 00mm 4 TE-L75 Support (75 mm);stroke 75 mm 5 PL-T Base frame; mounting for TE-XYR or TE-L 6 PL-600 Aluminium base; max. length workpiece: 600 mm 7 COM 800 Control 8 PRO Welding positioner; max. load 60kg 9 FS- Foot switch All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 4/3
Modular System PRO/8-ST60 Functions of the COM-800 control Inch Timer Timer Overlap Standard Standard crater Standard Overlap crater Limit Limit Limit Limit run Link TIG or MIG arc Link TIG or MIG arc Link TIG or MIG arc Link TIG or MIG arc Link TIG or MIG arc run run run run All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 5/3
Modular system PRO/8-SR60 8 3 4 9 6 Model PRO/8-SR60 5 7 Supply voltage Hollow shaft Table diameter AC 30V/50Hz/3A DC 90V/50W 60 mm 340 mm Tilt angle 0 90 Welding current 300A/ 00% Rotating speed Load capacity Torque Rotating direction Overlap timer (fixation point) Timer (fixation point) Time control (fixation point) Start/crater filling Welding arc brake 0,6 6 rpm 00 kg 65 kg/cm cw/ccw 0 999 sec. Standard/crater magnetic HF-protection 00 % Start Weight Foot switch (M) 8 kg 0 TE-C -axis-clamp holder (PVC) for MIG/TIG torch TE-CAL50 Linear slide (50 mm); connection 50 mm 3 TE-XYR -axis-gear rack with handwheel (00 mm); X/Y-range 00mm 4 TE-L75 Support (75 mm);stroke 75 mm 5 PL-R Support block for 5 80 mm diameter 6 PL-T Base frame; mounting for TE-XYR or TE-L 7 PL-600 Aluminium base; max. length workpiece: 600 mm 8 COM 800 Control 9 PRO Welding positioner; max. load 60kg 0 FS- Foot switch All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 6/3
Modular system PRO/8-SR60 All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 7/3
Modular system PRO/8-LT60 9 3 0 4 6 5 7 Model Supply voltage Hollow shaft Table diameter PRO/8-LT60 AC 30V/50Hz/3A DC 90V/50W 60 mm 340 mm Tilt angle 0 90 Welding current 300A/ 00% Rotating speed Load capacity Torque Rotating direction Overlap timer (fixation point) Timer (fixation point) Time control (fixation point) Start/crater filling Lichtbogenart brake 0,6 6 rpm 00 kg 65 kg/cm cw/ccw 0 999 sec. Standard/crater magnetic HF-protection 00 % Start Weight Fußschalter (M) 8 kg TE-C -axis-clamp holder (PVC) for MIG/TIG torch TE-CAL50 Linear slide (50 mm); connection 50 mm 3 TE-XYR -axis-gear rack with handwheel (00 mm); X/Y-range 00mm 4 TE-L75 Support (75 mm);stroke 75 mm 5 PL-CL00 Pneumatic tailstock; connection 00 mm 6 PROA-56 Idling centring taper diameter: 56 mm 7 PL-T Base frame; mounting for TE-XYR or TE-L 8 PL-600 Aluminium base; max. length workpiece: 600 mm 8 COM 800 Control 0 PRO Welding positioner; max. load 60kg FS- Foot switch 8 All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 8/3
Modular system PRO/8-LT60 All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 9/3
Modular System PRO/8-LR60 0 3 4 6 5 7 8 Model Supply voltage Hollow shaft Table diameter PRO/8-LR60 AC 30V/ 50Hz/ 3A DC 90V/ 50W 60 mm 340 mm Tilt angle 0 90 Welding current 300A/ 00% Rotating speed Load capacity Torque Rotating direction Overlap timer (fixation point) Timer (fixation point) Time control (fixation point) Start/crater filling Welding arc Brake 0,6 6 rpm 00 kg 65 kg/cm cw/ccw 0 999 sec. standard/crater magnetic HF-protection 00 % Start Weight Foot switch (M) 8 kg TE-C -axis-clamp holder (PVC) for MIG/TIG torch TE-CAL50 Linear slide (50 mm); connection 50 mm 3 TE-XYR -axis-gear rack with handwheel (00 mm); X/Y-range 00mm 4 TE-L75 Support (75 mm);stroke 75 mm 5 PL-CL00 Pneumatic tailstock; connection 00 mm 6 PROA-56 Idling centring taper diameter: 56 mm 7 PL-T Base frame; mounting for TE-XYR or TE-L 8 PL-R Support block for 5 80 mm diameter 9 PL-600 Aluminium base; max. length workpiece: 600 mm 0 COM 800 Control PRO Welding positioner; max. load 60kg FS- Foot switch 9 All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 0/3
Modular System PRO/8-LR60 All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page /3
Modular system PRO/8-VSTH0 3 7 6 4 5 Model PRO/8-VSTH0 Supply voltage Hollow shaft Table diameter AC 30V/50Hz/3A DC 90V/50W 60 mm 340 mm Tilt angle 0 90 Welding current 300A/ 00% Rotating speed Load capacity Torque Rotating direction Overlap timer (fixation point) Timer (fixation point) Time control (fixation point) Start/crater filling Welding arc Brake 0,6 6 rpm 00 kg 65 kg/cm cw/ccw 0 999 sec. standard/crater magnetic HF-protection 00 % Start Weight Foot switch (M) 4 kg Item no. 78066.00 TE-C 9 -axis-clamp holder (PVC) for MIG/TIG torch TE-CAL50 Linear slide (50 mm); connection 50 mm 3 TE-XYR -axis-gear rack with handwheel (00 mm); X/Y-range 00mm 4 TE-L75 Support (75 mm);stroke 75 mm 5 PL-T Base frame; mounting for TE-XYR or TE-L 6 VPOS-H0 Positioner (00 mm); max. workpiece length: 350 mm 7 COM 800 Control 9 FS- Foot switch All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page /3
UNI Modular system PRO/8-VSTH0 VSTH0 Assembly turn table 30 40 All prices excl. VAT. Subject to misprints, errors and technical changes! 7.09.08 Page 3/3