Absolute Encoders Multiturn
|
|
- Jodie Harmon
- 6 years ago
- Views:
Transcription
1 The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of 8 bits these encoders offer an optional additional RS4 incremental track with 048 pulses. RoHS / Mechanical drive Safety-Lock TM High rotational speed Temperature IP High protection level High shaft load capacity Shock / vibration resistant Magnetic field proof Reverse polarity protection Optical sensor Seawater-resistant version on request Reliable Tried-and-tested in applications with the highest demands, such as in mobile automation or medical technology. Ideal for use outdoors thanks to IP67 protection and wide temperature range from -40 C up to +80 C Flexible Node address can be set via rotary switches or software Baud rate and termination can be set via DIP switches or software With bus terminal cover or fixed connection, as well as M connectors or cable connection Order code Shaft version Type.. a b c d e f If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. a Flange = clamping flange, ø 58 mm, IP65 = synchro flange, ø 58 mm, IP65 = clamping flange, ø 58 mm, IP67 4 = synchro flange, ø 58 mm, IP67 5 = square flange, 6.5 mm (.5 ), IP65 7 = square flange, 6.5 mm (.5 ), IP67 b Shaft (ø x L), with flat = 6 x 0 mm ) = 0 x 0 mm ) = 6,5 x, mm (/4 x 7/8 ) 4 = 9,5 x, mm (/8 x 7/8 ) c Interface / Power supply = CANopen DS0 V4.0 / V DC 5 = CANopen DS0 V4.0 / V DC mit 048 ppr incremental track (TTL-compatible) ) d Type of connection removable bus terminal cover = cable gland radial = x M connectors Fixed connection without bus terminal cover A = cable outlet PVC, radial, m E = x M connector, radial F = x M connector, radial I = x M connector, radial J = x M connector, radial K = x SUB-D connector, 9 pin e Fieldbus profile 4) = CANopen encoder profile DS406 V. = CANlift DS47 V.0 f Options (Service) = no options = SET button optional on request - Ex / - seawater-resistant - special cable length Order code Hollow shaft Type.. a b c d e f If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. a Flange = with torque stop set, IP65 = with torque stop set, IP67 = with stator coupling, ø 65, IP65 4 = with stator coupling, ø 65, IP67 5 = with stator coupling, ø 6, IP65 6 = with stator coupling, ø 6, IP67 b Blind hollow shaft = ø 0 mm 4 = ø mm 5 = ø 4 mm 6 = ø 5 mm 8 = ø 9.5 mm [/8 ] 9 = ø.7 mm [/ ] c Interface / Power supply = CANopen DS0 V4.0 / V DC 5 = CANopen DS0 V4.0 / V DC with 048 ppr incremental track (TTL-compatible) ) d Type of connection removable bus terminal cover = cable gland radial = x M connectors Fixed connection without bus terminal cover A = cable outlet PVC, radial, m E = x M connector, radial F = x M connector, radial I = x M connector, radial J = x M connector, radial K = x SUB-D connector, 9 pin e Fieldbus profile 4) = CANopen encoder profile DS406 V. = CANlift DS47 V.0 f Options (Service) = no options = SET button optional on request - Ex / - seawater-resistant - special cable length ) Preferred type only in conjunction with Flange type ) Preferred type only in conjunction with Flange type ) Only in conjunction with connection type 4) CAN parameters can also be factory pre-set 6 Fritz Kübler GmbH, subject to errors and changes. 07/0
2 Mounting accessory for shaft encoders Coupling Bellows coupling ø 9 mm for shaft 6 mm Bellows coupling ø 9 mm for shaft 0 mm Mounting accessory for hollow shaft encoders Cylindrical pin, long for torque stops With fixing thread Connection Technology Connector, self-assembly (straight) Coupling M for Connector M for Cordset, pre-assembled with m PVC cable A.00M A4.00M Programming set including: - Interface converter USB-CAN - Connection cable from interface converter to encoder - Power supply V AC - DVD with Ezturn software Minimum System Requirements: Operating system: Windows P SP or higher Win7 in preparation Processor: GHz RAM : 5 MB Required disk space: 500 MB Further accessories can be found in the Accessories section or in the Accessories area of our website at: Additional connectors can be found in the Connection Technology section or in the Connection Technology area of our website at: Absolute Encoders Multiturn Mechanical characteristics Max. speed without shaft seal (IP65) up to 70 C min -, min - (continuous) without shaft seal (IP65) up to Tmax min -, min - (continuous) with shaft seal (IP67) up to 70 C min -, min - (continuous) with shaft seal (IP67) up to Tmax min -, 000 min - (continuous) Starting torque without shaft seal (IP65) < 0.0 Nm with shaft seal (IP67) < 0.0 Nm Rotor moment of inertia shaft version 4.0 x 0-6 kgm hollow shaft version 7.5 x 0-6 kgm Load capacity of shaft radial 80 N axial 40 N Weight with bus terminal cover ca kg with fixed connection ca. 0.5 kg Protection EN 6059 housing side IP67 shaft side IP65, opt. IP67 E approval for hazardous areas optional Zone and Working temperature range -40 C C ) Materials shaft/hollow shaft stainless steel flange aluminium housing zinc die-cast housing cable PVC Shock resistance acc. EN m/s, 6 ms Vibration resistance acc. EN m/s, Hz General electrical characteristics Power supply V DC Power consumption (no load) max. 00 ma Reverse polarity protection of the power supply (U B ) yes UL-certified File 468 CE compliant acc. to EN , EN , EN RoHS compliant acc. to EU-guideline 00/95/EG SET button (Zero or defined value, option) Protection against accidental activation. Button can only be operated with a ball-pen or pencil. Diagnostic LED (yellow) LED is ON with the following fault conditions Sensor error (internal code or LED error), too low voltage, over-temperature Incremental track characteristics Output driver RS4 (TTL-compatible) Permissible load / channel max. 0 ma Signal level high typ..8 V low typ.. V Short circuit proof outputs yes ) Resolution 048 ppr ) Cable version: -0 C C ) Short circuit to 0 V or to output, only one channel at a time, supply voltage correctly applied Fritz Kübler GmbH, subject to errors and changes. 07/0 7
3 Interface characteristics : Singleturn resolution Default value Total resolution (6 bit), scaleable 89 ( bit) (8 bit) Default: 5 bit Code Binary Interface CAN High-Speed acc. to ISO 898, Basic- and Full-CAN CAN Specification.0 B Protocol CANopen Profile DS406 V. with manufacturer-specific add-ons or CANlift Profile DS47 V. Baud rate kbit/s (can be set via DIP switches / software configurable) Node address... 7 (can be set via rotary switches / software configurable) Termination switchable can be set via DIP switches, software configurable General information about CAN/CANlift The CANopen encoders support the latest CANopen communication profile according to DS0 V4.0. In addition, device specific profiles such as encoder profile DS406 V. and DS47 V. (for lift applications) are available. The following operating modes may be selected: Polled Mode, Cyclic Mode, Sync Mode and a High Resolution Sync Protocol. Moreover, scale factors, preset values, limit switch values and many other additional parameters can be programmed via the CAN bus. When switching the device on, all parameters, which have been saved on an EEPROM to protect them against power failure, are loaded again. The following output values may be combined in a freely variable way as PDO (PDO mapping): position, speed, acceleration as well as the status of the working area. As competitively priced alternatives, encoders are also available with a connector or a cable connection, where the device address and baud rate can be changed and configured by means of the software. The models with bus terminal cover and integrated T-coupler allow for extremely simple installation: the bus and supply voltage can be easily connected via M connectors. The device address can be set via rotary hex switches. Furthermore, another DIP switch allows for the setting of the baud rate and switching on a termination resistor. Three LEDs located on the back indicate the operating or fault status of the CAN bus, as well as the status of an internal diagnostic. CANopen Communication Profile DS0 V4.0 Among others, the following functionality is integrated. Class C functionality: NMT Slave Heartbeat Protocol High Resolution Sync Protocol Identity Object Error Behaviour Object Variable PDO Mapping Self-start programmable (Power on to operational) Sending PDO s Node address, baud rate and CANbus Programmable termination CANopen Encoder Profile DS406 V. The following parameters can be programmed: Event mode Units for speed selectable (steps/sec or RPM) Factor for speed calculation (e.g. circumference of measuring wheel) Integration time for the speed value from... working areas with upper and lower limits and the corresponding output states Variable PDO mapping for position, speed, work area status Extended failure management for position sensing with integrated temperature control User interface with visual display of bus and failure status - LED s Optional - CAMs programmable Customer-specific memory - 6 Bytes CANopen Lift Profile DS47 V. Among others, the following functionality is integrated: Car Position Unit virtual devices virtual device delivers the posititon in absolute measuring steps (steps) virtual device delivers the posititon as an absolute travel information in mm Lift number programmable Independent setting of the node address in relation with the CAN identifier Factor for speed calculation (e.g. measuring wheel periphery) Integration time for speed value of... work areas with upper and lower limits and the corresponding output states Variable PDO mapping for position, speed, acceleration, work area status Extended failure management for position sensing with integrated temperature control User interface with visual display of bus and failure status - LED s All profiles stated here: Key-features The object 600h Preset is assigned to an integrated key, accessible from the outside Watchdog controlled device 8 Fritz Kübler GmbH, subject to errors and changes. 07/0
4 Terminal assignment Bus terminal cover with terminal box (type of connection ) Direction OUT IN Signal CAN Ground CAN_Low (-) CAN_High (+) 0 Volt +U B 0 V +U B CAN_Low (-) CAN_High (+) CAN Ground power supply power supply power supply power supply Abbreviation CG CL CH 0 V +V 0 V +V CL CH CG Cable connection (type of connection A) and SUB-D-9 connector (type of connection K) Direction Signal 0 Volt +U B CAN_Low (-) CAN_High (+) CAN Ground power supply power supply Abbreviation 0 V +V CL CH CG Cable colour WH BN E GN G SUB-D 9: IN Bus terminal cover with Connectors x M (type of connection, F or J) Direction OUT IN Signal CAN Ground CAN_Low (-) CAN_High (+) 0 Volt +U 0 V +U B CAN_Low (-) CAN_High (+) CAN Ground power supply power supply power supply power supply Abbreviation CG CL CH 0 V +V 0 V +V CL CH CG M PIN assignment M PIN assignment Absolute Encoders Multiturn Connector M (type of connection I) or M (type of connection E) Direction IN Signal 0 Volt +U B CAN_Low (-) CAN_High (+) CAN Ground power supply power supply Abbreviation 0 V +V CL CH CG M PIN 0 7 assignment M PIN 5 4 assignment and out M: M: M: Terminal assignment incremental track Signal A B 0 V PIN Fritz Kübler GmbH, subject to errors and changes. 07/0 9
5 Dimensions shaft version, with removable bus terminal cover Synchro flange, ø 58 mm Flange type and 4 (Drawing with cable) 57 [,4] 50 [,97] 58 [,8] 50 [,97] 40 [,57] 60 [,6] D h8 x M4, 6 [0.4] deep [0,] [0,] 4 [0,6] 86 [,9] 0 [,8] 4,5 [0,57] 4 [,65] x 0 Status LED 87, [,4] SET button Clamping flange, ø 58 mm Flange type and (Drawing with x M connector) 50 [.97] [.8] [.] 58 5,8 6 [.4] D 40 [.57] 60 [.6] [.89] [0.9] 4,5 [0.57] [0.] 0 [.8] [0.] 76 [.0] x0 77, [.0] x M, 6 [0.4] deep x M4, 8 [0.] deep Square flange, 6.5 mm Flange type 5 and 7 (Drawing with cable) 57 [,4],75 h7[,5] D h7 40 [,57] 60 [,6] 7, [0,8] 4,5 [0,57] 5,5 [0,] 5,4 [,06] 7,5 [0,] 0 [,8] 6,5 [,5] 78,5 [,] 79,5 [,] 0 Fritz Kübler GmbH, subject to errors and changes. 07/0
6 Dimensions shaft version, with fixed connection Synchro flange, ø 58 mm Flange type and 4 (Drawing with M connector), [0,5] 58,5 [,] x M4, 6 [0.4] deep 58 [,8] 50 [,97] D h8 [0,] [0,] 4 [0,6] 69,5 [,74] 70,7 [,78] 4 [,65] x 0 Synchro flange, ø 58 mm Flange type and 4 (Drawing with SUB-D connector) 4,5 [0,56] 4,7[,64] Absolute Encoders Multiturn [,8] [,97] 5 [0,98] D h8 x M4, 8 [0.] deep x 4/40 UNC;.0 [0.] deep [0,] [0,] 4 [0,6] 69,5 [,74] 70,7 [,78] 4 [,65] x 0 Square flange, 6.5 mm Flange type 5 and 7 (Drawing with x M connector), [0,5] 58,5 [,] [,5],75 D h8 8 [,] 7, [0,8] 7,5 [0,] 6 [,44] 6, [,48] 5,5 [0,] 5,4 [,06] 6,5 [,5] Fritz Kübler GmbH, subject to errors and changes. 07/0
7 Dimensions shaft version, with fixed connection Clamping flange, ø 58 mm Flange type and (Drawing with M connector) 58,5 [.] x M, 6 [0.4] deep x M4, 8 [0.] deep 58 [.8] 5,8 [.] 6[.4] D 48 [.89] 0 [0.9] [0.] [0.] 59,5 [.4] 70,5 [.78], [0.5] x 0 0 Synchro flange, ø 58 mm Flange type and 4 (Drawing with M connector) 58,5 [,] 58 [,8] 50 [,97] D h8 8 [,] x M4, 6 [0.4] deep Status LED SET button [0,] [0,] 4 [0,6] 69,5 [,74] 70,5 [,78], [0,5] 4 [,65] x 0 Clamping flange, ø 58 mm Flange type and (Drawing with cable) 59,7 [,5] 0 x M, 6 [0.4] deep x M4, 8 [0.] deep 58 [.8] [.] [.4] D 5,8 6 0 [0.9] [0.] [0.] 59,5 [.4] 60,7 [.8] 48 [,89], [0,5] x 0 Fritz Kübler GmbH, subject to errors and changes. 07/0
8 Dimensions hollow shaft version (blind hollow shaft), with removable bus terminal cover Flange with torque stop set long, ø 58 mm Flange type and (Drawing with x M connector) 49,5 [.95] 4 [0.55],99-0,0 [0.6],4 [0.09] Torque stop slot, Recommendation: Cylindrical pin DIN7, ø 4 mm x M, 5.5 [0.] deep max. [.] 4,5 [0.57] 40 [.57] 60 [.6] 6,7 [.44] 40,9 [.6] 0 4 [0.6] 9 [0.75] 4 [.65] 84, [.] 9,4 [.59] Flange with stator coupling, ø 58 mm Flange type 5 and 6 Pitch circle diameter for fixing screws 6 mm (Drawing with cable) 4,5 [0.57] 57, [.6] Absolute Encoders Multiturn Fixing screws DIN 9 M x 8 (Washer included in delivery) max. [.] 40 [.57] 60 [.6] [.68] 68 6 [.48] 0,8 [0.0] 4 [0.6] 9 [0.75] 84 [.], [0.] 5 0 [0.79] 9 [.6] With stator coupling, ø 58 mm Flange type and 4 4,5 [0.57] x0 49,5 [.95] 4, [0.7] max. [.] 40 [.57] 60 [.6] Pitch circle diameter for fixing screws 65 mm (Drawing with x M connector),5 [0.09] 94, [.7] 9 [0.75] 65 [.56] 95,5 [.76] : Insertion depth for blind hollow shaft: 0 mm Fritz Kübler GmbH, subject to errors and changes. 07/0
9 Dimensions hollow shaft version (blind hollow shaft), with fixed connection Flange with torque stop set long, ø 58 mm Flange type and (Drawing with M connector),5 [0.5] 58,5 [.] 4 [0.55],99-0,0 [0.6] [0.09],4 Torque stop slot, Recommendation: Cylindrical pin DIN7, ø 4 mm x M, 5.5 [0.] deep [.] 58 [.8] 6,7 [.44] 40,9 [.6] max. 0 4 [0.6] 66,5 [.6] 7, [.88] 74,7 [.9] 4 [.65] Flange with torque stop set long, ø 58 mm Flange type and (Drawing with SUB-D connector) Torque stop slot, Recommendation: Cylindrical pin DIN7, ø 4 mm xm, 6 [0.4] deep x 4/40 UNC;.0 [0.] deep max. [.] 4,5 [0,56] 5 [0,98] 58 [.8] 4,7 [,64] 4 [0.55],99-0,0 [0.6],4 [0.09] 6,7 [.44] 40,9 [.6] 0 4 [0.6] 66,5 [,6] 7, [.88] 74,4 [.9] 4 [.65] Flange with stator coupling, ø 58 mm Flange type and 4 Pitch circle diameter for fixing screws 65 mm (Drawing with x M-connectors),5 [0.5] x0 4, [0.7] 8 [.] 65 [.56] 7 [.8],5 [0.] 77,7 [.06] 79, [.] 58,5 [9.09] : Insertion depth for blind hollow shaft: 0 mm 4 Fritz Kübler GmbH, subject to errors and changes. 07/0
10 Dimensions hollow shaft version (blind hollow shaft), with fixed connection Flange with stator coupling, ø 58 mm Flange type 5 and 6 Pitch circle diameter for fixing screws 6 mm (Drawing with M connector),5 [0.5] 58,5 [.] max [.] [0.05] 58 [.8] [.68] 68 6[.48] 4 [0.6] 66,5 [.6] 75,8 [.98], [0.] 5 0 [0.79] Flange with torque stop set long, ø 58 mm Flange type and (Drawing with x M connector) Torque stop slot, Recommendation: Cylindrical pin DIN7, ø 4 mm xm, 6 [0.4] deep max. [.],5 [0.5] 8 [.] 58 [.8] 58,5 [.] 4 [0.55],99-0,0 [0.6],4 [0.09] 6,7 [.44] 40,9 [.6] 0 4 [0.6] 66,5 [.6] 4 [.65] 7, [.88] 74,4 [.9] 59,7 [.5],5 [0.5] x0 4, [0.7] 58 [.8] Absolute Encoders Multiturn Flange with stator coupling, ø 58 mm Flange type and 4 Pitch circle diameter for fixing screws 65 mm (Drawing with cable),5 [0.] 77,7 [.06] 79, [.] 65 [.56] 7 [.8] : Insertion depth for blind hollow shaft: 0 mm Fritz Kübler GmbH, subject to errors and changes. 07/0 5
Standard CANopen/CANopenLift. RoHS. High protection level. High shaft load capacity. Flexible
CANopen/CANopenift The Sendix multiturn encoders 868 and 888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a
More informationENCODER. CANopen Multiturn. Series , Key-Features:
ENCOER CANopen Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Solid Shaft... Order Code Blind Hollow Shaft... Technical ata... CANopen Interface...5 Connection...6 Technical drawing...7
More informationAbsolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationRotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationAbsolute Encoders. SSI & BiSS. CANopen CANlift
Absolute Encoders SSI & BiSS Profibus -DP CANopen CANlift www.turck.com www.turck.com Kübler by TURCK Absolute Encoders Safety-Lock Sendix Absolute with Fieldbus Interface Singleturn, Multiturn - with
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
More informationRotary Measuring Technology
--20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationMAGNETIC ABSOLUTE MULTITURN
MAGNETI ABSOLUTE MULTITURN ompact Robust Standard Find on page F2 Find on page F15 Find on page F28 ompact, Magnetic Type RM-97/RM-98 Analog F2 Type RM-99/RM-100 SSI F7 Type RM-101/RM-102 ANopen F11 ompact,
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationAbsolute encoders - bus interfaces Solid shaft with synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
EAM60 - solid shaft CANopen - MAGRES Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up to IP 67 High
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationEncoder WDGA 58A CANopen
Encoder WDGA 58A CANopen www.wachendorff-automation.com/wdga58acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationComplete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line
Rotary encoders for geared motors: 5820 M-Line Complete Solutions from Specialists Stable: Even under the toughest of uses. Versatile mounting options with individual torque arm solutions. Economic: Can
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationAbsolute encoders - bus interfaces Encoder kit Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Magnetic single- or multiturn encoders 1 bit ST / 18 bit MT Features single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.1 Additional incremental signals High protection up
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationAbsolute encoder TBD/TRD with PROFIBUS-DP interface
with PROFIBUS-DP interface Document no.: TRD 11868 LE Date: 15.02.2016 Singleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationEncoder WDGA 58B CANopen
Encoder WDGA 58B CANopen www.wachendorff-automation.com/wdga58bcan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationOptical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More informationSpeed switches Programmable, digital speed switch With incremental encoder POG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) EURO-flange B10 / shaft ø11 mm DSL.R: 3 outputs speed
More informationRotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
More informationEncoder WDGA 36A CANopen
Encoder WDGA 36A CANopen www.wachendorff-automation.com/wdga36acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationSpeed switches Programmable, digital speed switch With incremental encoder HOG 10
Features Freely programmable on and off switching speed Operation via included software (RS485 interface) Additional incremental signals (HTL/TTL) Combination with end shaft ø16 mm DSL.R: 3 outputs speed
More informationTECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - CANopen Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm CANopen communication profile according to DS 301; Programmable according to Class 2 Resolution up to
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
More informationW Economic: Can be installed quickly and efficiently. W Compact and versatile: Top technology for limited
Incremental and Absolute Encoders especially for Drive Technology RoHS 2/22 Complete Solutions for geared motors W Sturdy: Withstands even the toughest conditions. W Economic: Can be installed quickly
More informationEncoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
More informationRotary Position Technology Absolute Encoders, Multiturn
-40 to 80 IP Bearing-ock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Reverse polarity protection Optical sensor Reliable Increased
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
More informationAbsolute encoders multiturn
The Sendix 8 multiturn with patented Intelligent Scan Technology is a particularly high resolution optical multiturn encoder without gears and with 00 percent magnetic insensitivity. bits total resolution,
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationPOG 10 + DSL. Features
Features Freely programmable on and off switching speed Programming via included software (RS485 interface) TTL or HTL, EURO-flange and/or housing foot 3 / solid shaft ø11 mm DSL.R: 3 outputs speed controlled
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationType EXME - DeviceNet
Explosion Proof - Mining / Absolute Type EXME - DeviceNet Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm DeviceNet communication protocol Resolution up to 30 bits Removable End Cap for on-site modifications
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationCurrent consumption... Multiturn: max.230ma with 10 V DC,max.100mA with 24 V DC
- Standard encoder 8mm with canopen/can interface - Precision ball bearings with sealing flange - Code disc made of unbreakable and durable plastic - High protection level IP6, IP67 option with a sealing
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationLinear measuring technology
Draw wire encoder C00 Thanks to its roust design and its high IP67 protection level, the draw wire encoder C00 relialy provides accurate length measurement Its simple and optimal integration in the application
More informationProduct Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications
Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Profibus-DP
PROCESS FIELD BUS Main Features - Approval II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: - DPV2-Functionality - max. 65536 steps per revolution
More informationEncoder WDGA 58A RS485
Encoder WDGA 58A RS485 www.wachendorff-automation.com/wdga58ars485 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationATM 60/ATM 90: Multiturn Absolute Encoders extremely robust and exceptionally reliable.
ATM 60/ATM 90: Multiturn Absolute Encoders extremely robust and exceptionally reliable. With SSI- or RS 422 configuration interface, Profibus, CANopen or DeviceNet field bus technology, all current interfaces
More informationEncoders Draw wire encoders Magnetic measurement system Limes Connection technology Accessories. Sensor technology Rotary and linear encoders
Encoders Draw wire encoders Magnetic measurement system Limes Connection technology Accessories Sensor technology Rotary and linear encoders Integrated Components Off-the-Shelf Systems Kübler's claim is
More informationAccessories. Page 1/
Table of contents Page Programming software Ezturn 302 SSI-Display Type 570 303 Multifunction display Type 571 304 Fixing components for encoders Flange adapters, square, round, angle 305 Fastening eccentrics
More informationTECHNICAL DATASHEET Incremental Encoder RI 58-F
Incremental hollow shaft encoder Up to 10 000 ppr Through hollow shaft and hubshaft up to 12 mm (14 mm optional) Optimized stator coupling Applications: Feedback for asynchronous motors, industrial applications
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationATM 60/ATM 90: Multiturn Absolute Encoders extremely robust and exceptionally reliable.
ATM 60/ATM 90: Multiturn Absolute Encoders extremely robust and exceptionally reliable. With SSI- or RS 422 configuration interface, Profibus, CANopen or DeviceNet field bus technology, all current interfaces
More informationEXAG - Dual Output Profibus / Incremental
Explosion Proof Profibus / Incremental EXAG Dual Output Profibus / Incremental Electrical Specifications General Ex d Proof Shaft Encoder Shaft: Profibus DPV2 Functionality Absolute Resolution up to 30
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
More informationAbsolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 BE Date: 13.11.2015 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
More informationECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information
Product Information ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing Suited for safety-related applications up to SIL 3 when coupled with additional measures 09/2018 ECI 1319,
More informationData Sheet MEM 16. Absolute Encoder Multiturn
Absolute Encoder Multiturn Features Resolution: Singleturn: up to 8,192 (13 Bit) steps per revolution Multiturn: up to 4,294,967,296 (32 Bit) revolutions Interface: SSI (synchron serial interface) or BiSS
More informationNOVOTURN Multiturn-Sensor non-contacting. Series RSM2800 digital SSI, SPI
NOVOTURN Multiturn-Sensor non-contacting Series RSM2800 digital SSI, SPI Special features True Power On System: counts turns even when not powered. Patented non-volatile technology does not require gears
More informationDATA SHEET ABSOLUTE OPTICAL ROTARY ENCODER ETHERNET POWERLINK
Main Features - Compact Industrial Model - Communication via Ethernet Powerlink V2 - Interface: Ethernet - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm - Max. 65536 Steps per Revolution (16
More informationProduct Information. RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft
Product Information RCN 6000 Absolute Angle Encoder with Integral Bearing and Large Hollow Shaft 08/2018 RCN 6000 series Absolute angle encoder with Integrated stator coupling Hollow through shaft 180
More informationNOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The contactless sensor utilizes the orientation of a magnetic field for the determination of the measurement angle. The
More information