Product highlights 3-A fulfillment without elastomers Front-flush or immersed types Accurate reading independent on ambient temperature Fast response time Hermetically sealed towards process Capable of SIP (Sterilization in Place) Compact stainless steel housing, protection up to IP69K Optional integrated 4 2 ma transmitter User benefits Safe process with less downtime Free choice of mounting position even with agitators and pigging systems Ability for mounting in small tubes down to DN 25 High process effectiveness Long life time even in wash-down areas Reliable in SIP operation High flexibility by programmable output range Technical data Process conditions Housing Compact design Style Overall size Material Process temperature Refer to section Dimensional drawings Stainless steel Degree of protection (EN 6529) Humidity Vibration (sinusoidal) (EN 668-2-6) Refer to section Process conditions Reverse polarity protection Power-up time -4 85 C 8... 35 V DC Yes < 2 s Output signal -5 85 C Pt (4-wire) Resistance Current output [] Shunt resistance IP67 IP69K (with appropriate cable) < 98 % RH, condensing.6 mm p-p (2 25 Hz), 4 g (25 Hz), octave / min. Process connection G /2 A hygienic Others with adapters (please refer to section Accessories ) Material Wetted parts material Immersion length AISI 36L (.444) PEEK Natura Rs 68 Ohm (Vs = 24 V DC) Rs (Vs - 8 V) /.23 A Connection variants 4 2 ma (2-wire) -5 5 C (programmable) Output range Min. output span Sampling interval Damping Max. measuring error Max. output error Temperature drift (ambient) 25 C.5 s.... 3. s (programmable) Storage temperature range Process pressure Voltage supply range M2, 4-pin Ambient conditions Operating temperature range Power supply [] Electrical connection Connector variants -4 5 C 35 C max. (t < h) ±.25 C ±. % FS (±.6 ma) < ±.3 % FS / C typ. < ±. % FS / C max. Front-flush 2 mm 5 mm Ra <.8 μm Surface roughness wetted parts [] Only applicable with integrated 4 2 ma transmitter Data sheet Page / 9
Technical data Performance characteristics Compliance and approvals Pt accuracy class (EN 675) EMC B (±.3 C at C) A (±.5 C at C) AA (±. C at C) /6 B (±.5 C at C) Response time T5 9. s (front-flush) 2.5 s (2 mm) 2.7 s (5 mm) Response time T9 EN 6326- EN 6-6-2 EN 6-6-3 Hygiene 935/24/EG /2/EU 223/26/EG FDA (2 CFR 77.246) 3-A (74-6) [2] 66. s (front-flush) 6.5 s (2 mm) 6.7 s (5 mm) Factory settings [] Output range Output at sensor fault 5 C Damping 23 ma Note: Information on product characteristics may relate to defined product options. Data sheet Page 2 / 9 [] Only applicable with integrated 4 2 ma transmitter [2] The requirements of the respective 3-A Sanitary Standard will be only fulfilled in combination with appropriate mounting accessories. Those are marked with the 3-A logo.. s
Process conditions Process temperature Continuous 5 4 3 2 Process temperature max. ( C) 9 8 Vs 5 V 7 Vs 24 V 6 Vs 35 V 5 4 3 2 2 3 4 5 6 7 8 Ambient temperature max. ( C) 9 Temporary (t < h) 5 4 3 2 9 8 Process temperature max. ( C) Vs 5 V 7 Vs 24 V 6 Vs 35 V 5 4 3 2 2 3 4 5 6 7 8 Ambient temperature max. ( C) Data sheet 9 Page 3 / 9
Process pressure Type Front-flush Immersion length 2 mm Immersion length 5 mm Process pressure Process temperature Time limit bar C - -4 5 Unlimited - 5 5 35 <h - -4 5 Unlimited - 5 5 35 <h - -4 5 Unlimited - 5 5 35 <h Dimensional drawings Housing 5 Ø8 Ø8 26 M2 M2 Pt (4-wire) X4-3. 4 2 ma (2-wire) X4-3.2, X4-3.A Process connection G /2 A ø3,2 PEEK AISI 36L HEX 22 8 ø3,2 G /2 A G /2 A hygienic, immersion length 2 mm A3-B2.2 PEEK AISI 36L HEX 22 G /2 A hygienic, front-flush A3-A. 86 5. PEEK AISI 36L HEX 22 8 2 G /2 A hygienic, immersion length 5 mm A3-B2.5 56 8 G /2 A 36 Note: Information in format AXX-X... relates to Baumer Connection Identifier (BCID) and dedicated ordering code Data sheet Page 4 / 9
Electrical connection Pin assignment 4 Output signal Equivalent circuit Pt (4-wire) Pt 2 Function M2, 4 pin X4.3 Pt Pt 2 2 Pt 22 3 Pt 2 4 22 2 Frame ground +Vs 4 2 ma Iout +Vs Iout 2 n.c. 3, 4 Frame ground 4 2 ma (2-wire), Iout at pin 2, 3 ( Output signal A) Plug thread Plug thread +Vs 4 2 ma Iout +Vs Iout 2, 3 [3] n.c. 4 Plug thread Frame ground [3] Internally connected 4 2 ma (2-wire), Iout at pin 2 ( Output signal 2) 3 2 Data sheet Page 5 / 9
Product line Electrical connection M2, 4-pin, stainless steel BCID X4 - x x. x x x. A 3. x x. x x x x Output signal Pt (4-wire) 4 2 ma (2-wire), Iout at pin 2 4 2 ma (2-wire), Iout at pin 2, 3 2 A Configuration Without Output range Pt accuracy class (EN 675) B (±.3 C at C) A (±.5 C at C) AA (±. C at C) /6 B (±.5 C at C) Process connection G /2 A hygienic 3 A 5 7 BCID A3 Immersion length mm (front-flush) 2 mm 5 mm A 3 2 5 A B 2 B 2 Data sheet Page 6 / 9
Accessories Hygienic weld-in sleeves (G /2 A hygienic, BCID: A3) Universal use, with leak detection port Ø 3 x 34, AISI 36L (.444) ZPW2-32 Thin-walled tanks Ø 45 x 34, AISI 36L (.444) ZPW2-322 Inclined mounting Ø 35 x 34, AISI 36L (.444) ZPW2-324 Pipes with collar DN 25 5, Ø 29 x 36.5, AISI 36L (.444) DN 65 5, Ø 3 x 36.5, AISI 36L (.444) ZPW2-326 ZPW2-327 Hygienic adapters (G /2 A hygienic, BCID: A3) ISO 2852 (Clamp) DN 25; 33.7; 38, Ø 5.5, AISI 36L (.444) DN 4; 5, Ø 64., AISI 36L (.444) ZPH-323 ZPH-326 DIN 32676-A (Clamp) ZPH-323 ZPH-326 DN 25; 32; 4, Ø 5.5, AISI 36L (.444) DN 5; Ø 64., AISI 36L (.444) DIN 32676-C (Tri-Clamp) DN ; /2, Ø 5.5, AISI 36L (.444) DN 2, Ø 64., AISI 36L (.444) ZPH-323 ZPH-326 Varivent ZPH-344F ZPH-324E DN 25; (Type F), Ø 5, AISI 36L (.4435 BN2) DN 32 25; /2 6 (Type N), Ø 68, AISI 36L (.444) Data sheet Page 7 / 9
Accessories Hygienic adapters (G /2 A hygienic, BCID: A3) DIN 85 (tapered union) DN 25, AISI 36L (.444) DN 4, AISI 36L (.444) DN 5, AISI 36L (.444) ZPH-322 ZPH-3224 ZPH-3225 SMS 45 DN 5, AISI 36L (.444) ZPH-3236 Thread adapters (G /2 A hygienic, BCID: A3) Industry standard G A ISO 228-, AISI 36L (.444) G /2 A ISO 228-, AISI 36L (.444) G 2 A ISO 228-, AISI 36L (.444) ZPI-32B ZPI-32D ZPI-32E Hygienic interfacing G A hygienic, AISI 36L (.444) ZPH-32C Hygienic connectors with stainless steel knurl, protection up to IP69K (M2-A, 4-pin, BCID: X4) Female connector straight with attached cable 2 m, TPE 5 m, TPE m, TPE 25 m, TPE ESG 34AY2 ESG 34AY5 ESG 34AY ESG 34AY25 ESW 33AY2 ESW 33AY5 ESW 33AY ESW 33AY25 2 m, TPE 5 m, TPE m, TPE 25 m, TPE Female connector angular with attached cable Data sheet Page 8 / 9
Accessories Industrial connectors, protection up to IP67 (M2-A, 4-pin, BCID: X4) Female connector straight with attached cable 2 m, PUR 5 m, PUR m, PUR ESG 34AH2 ESG 34AH5 ESG 34AH Female connector angular with attached cable 2 m, PUR 5 m, PUR m, PUR 5 m, PUR 2 m, PUR ESW 33AH2 ESW 33AH5 ESW 33AH ESW 33AH5 ESW 33AH2 Female connector straight with attached cable, shielded 2 m, PUR 5 m, PUR m, PUR ESG 34AH2G ESG 34AH5G ESG 34AHG Female connector angular with attached cable, shielded 2 m, PUR 5 m, PUR m, PUR ESW 33AH2G ESW 33AH5G ESW 33AHG Female connector straight with screw terminals PG7, PBT ES 8A PG7 Female connector angular with screw terminals ES 4A PG7 PG7, PBT Interfaces FlexProgrammer 97 97- Kit for sensor parameterization, including programming interface with USB, connecting cables, carrying strap, CD-ROM with PC software and DTM drivers Data sheet Page 9 / 9