Laser & Peltier - TEC - Driver Type: ds11-la3.5v48-pa08v24-o8007-v0-598 Laser max.: 3.5A - 48V TEC max.: 8A - 24V (max. 150W) In: 110..230VAC - Analog or Digital Modulation - Bias Current option - Pilot Laser Supply - External Fan Support - optional medical version - optional 2nd TEC Laser Connector Support & TEC-Connector PIN.No Abbr. Function A1 LDC- Laser Diode Cathode A2 LDA+ Laser Diode Anode 1 PILOT Pilot Laser Supply 2 PHD Photo Diode Cathode vs. GND 3 T1 Temp. Sensor 1 vs. GND 4 GND 5 LUF Supply 800mA 2..24V for fan vs. GND Sub-D 15, female 8 7 6 5 4 3 2 1 XGND XTX XRX MOD PEL+ 15 14 13 12 11 10 9 PEL- ILOCK GND MODGND SCR Pin.No Abbr. Function 3 MOD Modulation Input 4 XRX RS232-RX 5 XTX RS232-TX 6 XGNC RS232-GND 7;8 PEL+ Peltier element (+) if TEC is on Board 11 MODGND Modulation GND 12 GND Common Ground 13 ILOCK Interlock vs. GND 14;15 PEL- Peltier element (-) if TEC is on Board 1,9,10,11 n.c. may carry Signals depending on Type SCR Common Screen c_lp_o8007_v0_598 1-2 OsTech (c) 18.10.2006 1/2
Laser & Peltier - TEC - Driver Mains Connector MAINS INPUT: 3 Pin, 5.08mm, with Friction Lock, 18-24 AWG MOLEX HousingNo:10013036 TerminalNo:8701031 c_lp_o8007_v0_598 2-2 OsTech (c) 18.10.2006 2/2
Features: 635nm wavelength 5W output power Standard fiber coupling for 105μm core diameter 0.22N.A. Applications: Display Biochemical analysis Scientific research Medical use BWT Beijing s High Power Diode Laser Modules are manufactured by adopting specialized fiber-coupling techniques, resulting in volume products with a high efficiency, stability and superior beam quality. The products are achieved by transforming the asymmetric radiation from the laser diode chip into an output fiber with small core diameter by using special micro optics. Inspecting and burn-in procedures in every aspect come to a result to guarantee each product with the reliability, stability and long lifetime. Our research staffs are constantly improving and innovating the processing technology in the producing process, based on the professional knowledge and experience accumulated in long-terms. We are also continuously developing new products to meet customers specific needs. At BWT Beijing, to provide high quality products with reasonable price is our always goal.
Specifications(25 ) Symbol Unit CW-Output Power Po W 5 Optical Data Center Wavelength c nm 635 Tolerance of - nm ±5 Spectral Width (FWHM) nm <3 Fiber Data (1) Fiber Numerical Aperture N.A. - 0.22 Fiber Core Diameter Wc µm 105 Fiber Connector - - SMA-905/FC/ST Operating Current Iop A 0.65 Electrical Data Threshold Current Ith A 0.18 Operating Voltage Vop V 28.6 PD Data Current Imo ma 0.20~2.00 Thermistor Data (2) Thermistor Rt (K Ω)/β(25 ) 10±5% 3477 Operating Temperature Top 10~30 Storage Temperature Tst -20~+70 Others Expected Lifetime MTTF h >5,000 Dimensions (fiber and connector not included) - mm 74 43 42.9 Lead Soldering Temperature Tis 260(10 sec.) (1) Other fiber is available. (2) Rt=R0 exp ( β(1/t 1/T0)), (T0=25 =298K).
Characteristics Typ. spectrum(t=25 )
Package Dimensions (mm) Pins Function 1 LD(+) 2 None 3 PD (N) 4 PD (P) 5 Thermistor 6 Thermistor 7 None 8 LD (-) OPERATING NOTES Avoid eye exposure to direct or scattered radiation. ESD precautions must be taken. Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260 and time shorter than 10 second. Use constant current power supply. Avoid surge current. Laser diode must be used according to the specifications. Laser diode must work with good cooling. A minimum bend radius should be 300 times greater than the fiber cladding diameter. Operation temperature is 10 ~ 30. Storage: -20 ~ +70, all pins short-circuit. Information and specifications contained herein are deemed to be reliable and accurate. BWT Beijing reserves the right to change, alter or modify the design and specifications of these products at any time without notice.