Huawei Railway Bearer Network Solution
Challenges to Existing Railway Bearer Networks Both the operational and the business applications of railway systems require high security, high availability, and high bandwidth, as well as high quality for mission-critical services, and easy O&M. Dispatching Center Data Center Operational Applications Business Applications Non-safety-critical Safety-critical...... Security Dispatch GSM-R/Radio Waiting Room & Ticketing Conference CCTV Track Side Data Entertainment Surveillance News Online Shopping Online High Security & Reliability Physical isolation for important services Low latency Multiple layers of protection to ensure network reliability Easy M Easy service deployment, monitoring, and management Self-healing network Easy troubleshooting Trend Multi-service Access TDM and IP services support Legacy PCM services support Future-oriented LTE-R is future-oriented Will handle bandwidth requirements in the next 5 to 10 years
Huawei Universal Railway Transport Network Solution Huawei's universal railway transport network solution provides the railway industry with high security, high availability, multi-service access, easy M, future-proof bandwidth, and wireless LTE-R access. Aggregation Station1 Station2 Station3 Station4 40G 40G 40G Integrated data network ring ring ring Wayside Access Access Station Base Sub Regeneration Base Sub Regeneration Base Sub Regeneration GSM-R (E1) FAS telephone (E1) CTC (E1) LTE (FE) on surveillance command (GE) (FE) (FE) SCADA (FE) TDM + Packet Planes TDM + packet planes provide access for both TDM and IP services, protecting investments by supporting evolution to future packet networks. Dispatching E1 FE Monitoring n*e1 FE Base Station TDM IP FE/GE RS232/ RS485 Signal Monitoring LTE-R /FXS FE Emergency Telephone
Smooth Evolution Protects Investments RTU NMS Phone STM-1/4 GE STM-16 E SCADA PC PBX Camera Router Transmission Network Evolution Trends MPLS Packet technologies Statistical bandwidth multiplexing SDH Hardware based M & protection Large-scale networking MPLS-TP IP/MPLS L3 + SDH M & Protection Physical + Logical Isolation The physical isolation of TDM ensures the isolation between and security of mission-critical services. Packet services share the bandwidth but are logically isolated from each other, and QoS technology is used to ensure the high quality of mission-critical services. GSM-R Signal Monitoring Dispatching Emergency Call SDH VC1 VC2 VC3 Physical Isolation High Security Surveillance Ticketing IP Idle Bandwidth VPN1 VPN2 VPN3 Logical Isolation High Efficiency Conferencing PQ WFQ TV Copper Hierarchical QoS PQ WFQ TV Silver 1 3 6 PQ WFQ Voice TV Gold
PCM The built-in PCM board processes PCM services, improving network reliability by minimizing device stacking and potential points of failure. In addition, the U2000 supports efficient O&M by centrally monitoring PCM services. PCM device Space saving Fewer stacked devices PCM board More reliable Fewer device faults Easy O&M Centralized management and monitoring Voice Low-rate Data Other Railway Administrative telephone, scheduling telephone, hotline telephone SCADA, signal monitoring, clock Miscellaneous services PCM Interface 2/4 wire, E&M, FXS/ RS232/RS422 V.35/V.28/V.11/X.21 2-wire/4-wire Audio and E&M Audio terminal 2-/4-wire audio STM-N/E1 2-/4-wire audio Audio terminal NE A PCM board: AT8 SDH line/pdh tributary board NE B Hotline FXS STM-N/E1 FXS PCM board NE A SDH line/pdh tributary board NE B Z Interface Extension FXS STM-N/E1 FXS PBX NE A PCM board SDH line/pdh tributary board NE B Sub-rate s Control center X.50 D3/V.110 encapsulation Sub-rate Sub-rate STM-N/E1 0.6 56 kbit/s 0.6 56 kbit/s Controller NE A PCM board SDH line/pdh tributary board NE B
Multiple Layers of Protection Multiple layers of protection prevent multiple points of failure and ensure high network reliability. RBC BSC MGW MSC 50 ms Switch Core SDH error detection rate10-9 Aggregation Aggregation Layer STM-N protection: LMSP 1+1/1:1 Packet protection: PW 1:1 Access Access Layer: MPLS-TP ring, MSP, and SNCP protection to prevent multiple points of failure TPS: E1/E3/FE Ethernet service protection: LAG/DLAG Equipment Redundancy SCC/Switch/Clock/Power/ Fan 1+1 hot backup BTS/eNodeB TP-Assist TP-Assist provides packet network O&M methods that are similar to those for SDH, improving O&M efficiency. Improved troubleshooting efficiency Hierarchical performance/alarm Packet testing Meter-free Error NMS E2E service configuration Optimization using MPLS-TP to improve O&M Fast service deployment increases efficiency by up to 60%. Multiple performance indicators, alarm levels, and triggering conditions increase O&M efficiency by up to 75%.
40G Smart Line Boards The 40G smart line boards prevent bandwidth bottlenecks. 40G line board to carry more services 40G Support for FEC to prevent error code and performance deterioration Without FEC With FEC High bandwidth Error code correction Simple networking 40G line board No need for wavelength planning Occupying less slots and reducing power consumption Saving up to 90% fiber patch cords, no need for optical-layer design within 80 km GE 2.5G E cross-connect ODUk Seamless evolution OMUX/DEMUX DCM OSC FIU Complex design of legacy WDM 4* Fiber (Provisioned) (Reserved) (Reserved) (Reserved) Plug-and-play smart line board Control available bandwidth through license 40G Fiber Corrupted image Restored image Initial stage Mid-term Long-term Purchase boards and provision bandwidth Purchase license and provision 20G bandwidth Purchase license and provision 40G bandwidth IEEE 1588v2 IEEE 1588v2 technology supports network-wide synchronization and provides sub-microsecond precision for LTE-R access. Problem of traditional GPS solution High cost: one GPS device for each base No protection: high connection failure rate (up to 10%) Difficult maintaining: extra antenna wiring and more onsite maintenance E2E 1588v2: eliminating dependence on GPS BITS (working) GPS Low cost: no need to provide a GPS device for each BTS High reliability: E2E clock path protection Easy deployment: centralized management through the NMS for easy M
Product Family OSN 550 Dimensions (H x W x D) (mm) Slots Switching Capacity 88 x 442 x 220 DC: 8; AC: 6 TDM: 20 Gbit/s (higher-order) + 5 Gbit/s (lower-order) Packet: 64 Gbit/s OSN 580 Dimensions (H x W x D) (mm) Slots Switching Capacity 221 x 442 x 220 DC: 15; AC: 12 TDM: 280 Gbit/s (higher-order) + 20 Gbit/s (lower-order) Packet: 560 Gbit/s Scan this QR code for further details http://e.huawei.com ican@huawei.com By Enterprise Transport MO & Information Dept. Copyright 2017 Huawei Technologies Co., Ltd. All rights reserved.