Professional EFI Systems Product Catalog Table of Contents: Section 1: ECU Options 2-8 Section 2: Various Sensors and Switches 9-14 Section 3: Display Options 15 Section 4: CAN Communication Cable 16 Section 5: Adapter Harness 17-21 Section 6: Plugs, Pins and Miscellaneous 22-29 Page - 1
ECU Options 9100 ProEFI 128ECU kit Retail: 2023.81 9140 ProEFI 48 701/705 ECU kit Retail: 837.33 Page - 2
The Pro128 uses a Freescale MPC 565 processor at 56mhz. The Pro48 uses a Motorola MPC 563 processor at 56mhz ECU Environmental Ratings The ECM is designed to meet automotive industry standard under hood environmental requirements for 12v and 24v systems, and also meets marine industry environmental requirements. Validation tests included extreme operating temperatures (-40* to +105*C), thermal shock, humidity, salt spray, salt fog, immersion, fluid resistance, mechanical shock, vibration, and EMC. It is the responsibility of the application engineer to assure that the application does not exceed the demonstrated capabilities of the unit; vibration or thermal. It may be necessary to perform additional tests to validate the unit in the application. www.proefi.com Page - 3 Features of the Pro128 Injectors - 12 peak n hold with calibratable peak time Coils - 16 TPS: Yes adaptive Coolant Temp Yes Air Temp Yes MAP Yes; unlimited range Idle Control Pulse width and stepper motor; adaptive Wideband 02 2 Built in UEGO controllers (external capable)
Page - 4 Professional EFI Systems Product Catalog 2012 CAM Yes Hall/VR capable CRANK Yes Hall/VR capable Variable CAM Yes 2 cam capable Knock Controls 2 Programmable frequency and event with individual cylinder notification Flex Fuel Capability Add a flex fuel sensor, and the computer automatically adjusts fuel, timing, and boost based on ethanol content. Nitrous Control 4 Stages multiple event trigger control range. V.E. based fueling**** Boost Control Multiple Control Strategies*** Traction Control Multiple Control Strategies*** Fuel Pump Control Yes* Analog inputs 34 Fuel Pressure monitoring and feedback correction, Oil pressure, Exhaust backpressure feedback and correction, and much more Low Side Outputs 10 total 8-10amp capable 2-2 amp capable Tachometer Yes Software configurable Digital inputs 8 channels; fully programmable pre configured High Current Bridges 3 Channel sets; used for stepper motor control, or electronic throttle control Speed Inputs 2 Drive By Wire Yes
Key Switch Power Yes Permanent Power Yes Battery Backup No Chassis Ground 4 Locations CAN channels 2 Channels Serial Connection Yes***** RS485 Connection Yes***** Internal Memory Limited to Fault Logic USB Direct Connection No Laptop Connection USB Page - 5 Features of the Pro48 Drive By Wire Yes Injectors 4 Peak n Hold Coils 8 TPS Yes; adaptive Coolant Temp Yes Air Temp Yes MAP sensor Yes unlimited Range Flex Fuel Yes; requires additional signal conditioning
Idle Control Pulse width and stepper motor; adaptive Wideband 02 External driver required 2 channel capable CAM Yes; Hall/VR capable CRANK Yes Hall/VR capable Variable CAM Yes Traction Control CAN based applications only! Nitrous Control 4 Stages; V.E. Based**** Boost Control Multiple Control Strategies*** Launch Control Multiple control strategies*** Fuel Pump control Yes* Analog Inputs 14* Low Side Outputs 6 6amp capable low side outputs* Tachometer Yes software configurable High Current Bridges 1 Channel set used for stepper motor control Speed Inputs None Drive By Wire Yes Fault Coding Safety Yes** MIL (CEL) Yes Malfunction indicator with fault codes Battery Backup No Chassis Ground 2 Locations Page - 6
CAN channels 1 Channel Serial Connection No RS485 Connection No Internal Memory Limited to Fault logic USB Direct connection USB on PC; CAN connection at ECU Logging with PC attached included on all ECU s. If logging without the PC connected is required, you must purchase one of the external loggers. This module simply connects through the CAN bus and is configurable, however it is preconfigured by ProEFI for common channels to be logged. *The amount of available channels is dependent upon the use of preconfigured I/O such as Fuel pump, TPS, etc **Fault coding is a strategy used by the O.E. manufacturers. This strategy allows for the capability to trigger faults and fault actions. Features include but are not limited to multiple safety strategies for limiting boost and shutting off nitrous control under lean conditions. See your Authorized ProEFI dealer for more information. ***Multiple strategies are configurable based upon time or speed. See your Authorized ProEFI dealer for more information. ****V.E. stands for volumetric efficiency. This is a strategy incorporated by the O.E. manufacturers to more accurately determine the fueling requirements of the engine. There are several advantages Page - 7
to using this method. See your Authorized ProEFI dealer for more information. *****These communication ports are dedicated for the use of future external peripherals to be announced by ProEFI at a later date. Adaptive is a term meaning that a particular feature will self tune itself constantly. This is another strategy used by the O.E. manufacturers to help keep the vehicle in a constant state of tune for hundreds of thousands of miles. Page - 8
VARIOUS SENSORS and SWITCHES Pressure Sensors: 3.5bar, 5bar, 7bar and 150psi, 500psi, 2000psi Retail: 145.98 Page - 9
9006 Air Temperature sensor kit with plug and pins Retail: 49.72 9010 Coolant sensor kit with plug and pins Retail: 49.57 Page - 10
9013/9014 Exhaust Back Pressure kit with selected sensor (5bar shown) Retail: 203.15 9015 Flex Fuel Sensor kit with adapter fittings, cable, and instructions Retail: 642.04 Page - 11
9007 Boost Control Solenoid kit with connector and pins Retail: 82.76 9020 I-boost Assembly kit Retail: 144.50 Page - 12
9022 EGT sensor kit (sensor and harness) Retail: 135.44 9019 LSU 4.2 O2 sensor kit with UEGO cable and instructions Retail: 144.94 Page - 13
9027 4 Channel Ghost Monitor Retail: 428.90 9028 Signal Conditioner Pulse to Voltage Converter Retail: 331.07 Page - 14
DISPLAY OPTIONS 6000 ProEFI 52mm CAN gauge Retail: 481.42 9401 CAN Display kit with cable and instructions Retail: 838.00 Page - 15
CAN1 COMMUNICATION CABLE (Required for software-ecu connection) 9016 CAN1 Communication Cable kit Retail: 412.11 Page - 16
ADAPTER HARNESS Call for custom applications and add-ons 9200/9202 Plug and Pin kit w/ecu Communication Cable (DIY wiring) Pro128 Pro48 Retail: 219.60 122.56 4502 - Mitsubishi EVO8 Harness Retail; 592.06 Page - 17
4850 - Lexus IS300 Harness 2002-2005 Retail: 759.65 Nissan R32/33/34 Skyline Harness Retail: 424.90 Page - 18
4704 Nissan R35 GTR Harness Retail: 1092.63 4152 Ford Cobra Mustang 2003-2004 Adapter Harness W/O Ignitors W/Ignitors Retail: 719.97 1198.98 Page - 19
4000/4001 9 and 24 Flying Lead Harness w/main relay and Communication adapter cable 9 24 Retail: 1263.52 556.80 4857 ProEFI Toyota Supra MKIV Adapter harness 6SPD AUTO Retail: 768.74 813.77 Page - 20
Porsche 911 996/997 Turbo Adapter Harness Retail: 1623.92 4051 BMW E46 M3 Adapter Harness Retail: 1217.94 Page - 21
PLUGS, PINS, CONNECTORS and MISC. 3002 J1A 32pin plug fills J1A plug on 128ECU Retail: 39.07 3001 J1B and J2B plug for the Pro128 and Plug B for the Pro48 Retail: 19.55 3002 J1C and J2A plug for the Pro128 and Plug A for the Pro48 Retail: 39.07 Page - 22
3414 SmartCraft Female 10pin connector for CAN1 communication cable Retail: 8.22 3415 SmartCraft Male 10pin connector for CAN1 communication cable Retail: 5.21 Page - 23
3003 LSU 4.2 Connector for UEGO cable Retail: 3.73 8070 Relay Retail: 9.47 Page - 24
8005 ProEFI Lightning Smart Coil coil only Retail: 149.99 8006 ProEFI High Output Lightning Coil coil only Retail: 199.99 Page - 25
8002 3 Channel Igniter Retail: 285.75 8003 4 Channel Igniter Retail: 306.82 Page - 26
Deutch 12way Plugs Male - 3503 Female - 3501 Retail: 11.29 10.52 3505 Deutch 12way wedge lock Male 3505 Female - 3502 Retail: 1.34 1.13 3405 (Lock) 3406 (Connector) 3 Pin connector 3406 3405 Retail: 8.37 0.78 Page - 27
3053 (Male) 3052 (Female) Sumitomo 4way connector Retail: 13.53 3051 (Male) 3050 (Female) Sumitomo 2way connector Retail: 10.52 Page - 28
3417/3418 Female Terminal for SmartCraft connector 3417 3418 Retail: 0.38 0.43 3054/3055 Sumitomo Pin for white Sumitomo connectors Female & Male Retail: 2.99 Deutch Male Pin for Deutch Connectors Male (3506) Female (3500) Retail: 0.74 1.13 Page - 29
*Prices are subject to change without notice and at any time. Contact ProEFI or any of our authorized dealers for more information and related products. ProEFI is here to help M-F 9AM-5PM. sales@proefi.com tech@proefi.com (480)607-4968 www.proefi.com Page - 30