CENTURION Pro Diagnostic Motorcycle Scan Tool USER S GUIDE. Version 1.0
|
|
- Kenneth Powers
- 5 years ago
- Views:
Transcription
1 CENTURION Pro Diagnostic Motorcycle Scan Tool USER S GUIDE Version 1.0
2 CHAPTER 1: Preliminaries Introduction Centurion is a user-friendly tool that can diagnose engine and system problems and perform many other tasks. This Windows-based program communicates with a large variety of ECMs / ECUs (Engine Control Modules / Engine Control Units). The interface between the ECU and the PC is via the USB port. The graphic user interface (GUI) with the help, hotkey, and mouse support provides a user-friendly system. The GUI consists of a pull-down menu and a tool bar. The execution of the menu items is performed via numeric controls, command button controls, pop-up panels and other mechanisms. About this Manual The Centurion User s Guide is a comprehensive guide that contains all of the procedures you need to work with this software. This manual is organized by chapters that describe the use of the software and the general description of the commands. Many topics covered in this manual can also be found in the help menu inside the program. System Requirements The following system configuration is required: - IBM or compatible PC with a minimum of 8MB of RAM (16MB recommended) - VGA Monitor, SVGA monitor or better - Windows Vista/XP/2000/NT/98 Technical Support You can reach us at or at (248) during normal business hours EST.
3 CHAPTER 2: Getting Started Installation 1. Insert Centurion Software in your computer s CD-ROM drive 2. Execute the installation program setup.exe 3. Follow the installation instructions. 4. After exiting the installation program, reboot your system (or restart Windows) 5. Insert the hardware key in the USB port of your computer. Starting Up Once you have successfully installed the Centurion software, you can run it by double clicking the icon Centurion on your desk top. A multilanguage screen will show. Select your language. Continuing At any time, you may get help by pressing F1.
4 CHAPTER 3: Data Monitoring In order to display the data you wish to monitor, you have to establish connection with the ECU and set the program to either gauges/meters mode or strip chart mode. To establish communication, use the connection command by either clicking on the communication icon or using the communication menu. In strip chart mode, you can select the data you want to be displayed using the channels/view command and choosing the on or off position. You can also change the colors of the lines of the strip chart using the colors command. Gauges/meters mode will show the same data. You can choose it by either clicking on the dashboard icon or using the dashboard option in the communication menu. This mode shows the data through slide bars, thermometers, check lights and nubs. CHAPTER 4: Functions Centurion Main Menu Bar Menu commands can be shown either by dragging the mouse across the menu bar and leftclicking the menu, or pressing ALT + the underlined letter in the name of the menu you want to open. File View Open and close a file, export data, print data, and close the program Shows commands related to data monitoring Communications Connect and disconnect from the ECU and select port settings Options Utilities Help Menu Select log settings, toggle log on or off, select ECU type, and select channels, units and color settings On-screen calculator and unit conversion Help!
5 CHAPTER 4: Toolbar This button toolbar is just below the Main Menu for quick access to the most frequent actions with one click. BUTTONS DEFINED BELOW, IN ORDER OF APPEARANCE ON TOOLBAR L-R Open file... Print Gauges & Meters Strip-Chart Horizontal Slide Bars Active Test Active Settings DTC & Function Errors System Status Antitheft Status Antilock Brake Status Vehicle Communication Module Spec. Connect Disconnect Log ON/OFF Select Bike Channels View Temp Units Calculator Unit Conversion Exit Open a log data file Print a copy of the active screen Monitor data via gauges & meters Monitor data in strip chart mode Monitor data in horizontal slide bar mode Perform tests of systems Engine calibration Diagnostic Trouble Codes Status Flags Monitor anti-theft device status Monitor ABS status Verify connection Establish connection with ECU Disconnect from ECU Log on and Log off data Brand/ECU/model selection Select data to be monitored English or metric Activate the calculator Display unit conversions Quit the active window
6 CHAPTER 5: Commands In-Depth Gauges & Meters Mode View data through bar slides graphs, thermometers and check lights Strip Chart monitor mode View data in line plot and numerical form Horizontal Slide Bars mode View data as horizontal slide bars
7 Numeric Data Description for Gauges/Meters, Strip Chart, & Slide Bar Modes (all shown on previous page) RPM: Battery: Spark Advance: Pulse Width: Throttle Position: Air Temperature: Engine Temperature: Barometric Pressure: Stepper Motor: Engine RPM numeric val. Battery voltage numeric val. Spark adv. angle numeric val. Pulse width numeric val. Throttle angle numeric val. Air temperature numeric val. Engine temp. numeric val. Barometric press. numeric val. Stepper motor numeric val. Active Settings Command Show & clear Diagnostic Trouble Codes (DTC), reset Throttle Position Sensor (TPS), reset Air Fuel Value (AFV), Idle Fuel Trim Adjustment & more Diagnostic Trouble Codes The ECU saves an error in memory if it detects a sensor-related problem. Then, Centurion will display both current and historic errors.
8 O.C. = Open Circuit / S.C. = Short Circuit / High V. = High Voltage / Low V. = Low Voltage When a sensor related problem exists, the following error messages would appear for any of the next parameters. The following are some of the diagnostic trouble codes: Air temperature: Engine temperature: Barometric pressure: Throttle position: Cam position: Tip sensor: Battery Voltage: Injector #1: Injector #2: Coil #1: Coil #2: Tachometer: O.C/High V. or S.C./Low V. O.C/High V. or S.C./Low V. O.C/Low V. or S.C./High V. O.C/High V. or S.C./Low V. O.C/High V. or S.C./Low V. O.C/High V. or S.C./Low V. O.C/High V. or S.C./Low V. O.C/Low V. or S.C./High V. O.C/Low V. or S.C./High V. O.C/Low V. or S.C./High V. O.C/Low V. or S.C./High V. O.C/Low V. or S.C./High V. Trips since last fault: Indicates how many trips the motorcycle has performed since an error has been detected. Function Errors ECU microp: ECU EEPROM: ECU ROM: ECU RAM: Crank/Cam: Crank position: ECU microp Signal Error (LED red) ECU EEPROM Signal Error (LED red) ECU ROM Signal Error (LED red) ECU RAM Signal Error (LED red) Crank/Cam Signal Error (LED red) Crank Pos Signal Error (LED red) System Status (read-only) The System Status Command displays a window, which shows all the status flags
9 Anti-Theft Status (read-only) Shows status flags for anti-theft parameters Anti-Lock Brake Status (read-only) Please note: this feature is currently only available on Japanese models included in Centurion Pro-Plus Vehicle Communication Module Specification Establishes that Centurion has responded. If this screen shows data in the fields and you are still having a communication problem, it means that it is on the bike side rather than the module side. Be sure that the system is powered up, or this screen will not read.
10 Establish connection with the ECU Cut connection with the ECU Log on/log off Toggles the data capture feature. *NOTE: you must be in Strip Chart mode to use the data logging feature. (Strip chart mode screen shown above.) The triggering can be set up to automatically capture as many data points as specified in the Log Data Points field when an error event is set. The data can be recorded in three different ways (start, middle and end), from the moment of the trigger, half the data points before the moment of the trigger and half the points after the trigger, or all the data points that preceded the trigger. Browse allows the selection of a filename. Trigger Mode selects Auto or Manual. Error event specifies the nature of the trigger.
11 Select Brand & ECU Choose first the brand, then the ECU/ECM within that brand Channels/Mode Use Min. & Max. fields to set the minimum & maximum scale values for data monitoring. Note that Strip Chart Mode provides the highest number of configurable channels: 16. Horizontal Slide Bar Mode has 4, and Gauges/Meters Mode has 6. However, the options selection is the same for the channels no matter which mode is selected. View Mode Options Parallel: Activates an individual chart for each channel to be displayed in the same screen using independent scales for each parameter. Overlay: Shows all the parameter graphs using the same scale for each one. Units F Displays the data in degrees Fahrenheit using the English unit system C Displays the data in degrees Celsius using the SI unit system..
12 Calculator For general purpose calculations using either the mouse or the keyboard. Unit Conversion Contains the most commonly used unit conversions. Exit discards the options you have selected, closes the dialog box and returns to the previous screen. Default closes the dialog box and completes the command keeping the conversions with the new data entered by default.
13 About Displays the copyright notice and version number of your copy of Centurion TechnoResearch Inc Delemere Ave. Royal Oak, MI (248)
Vehicle Diagnostic Scan-Tool Software (VDSTS) USER S GUIDE. Version 2.3
Vehicle Diagnostic Scan-Tool Software (VDSTS) USER S GUIDE Version 2.3 CHAPTER 1: ABOUT VDSTS Introduction The (VDSTS) is a user-friendly sofware tool able to diagnose engine and system problems. This
More informationCENTURION DIAGNOSTIC SOFTWARE
CENTURION DIAGNOSTIC SOFTWARE Quick Start Guide This Guide is intended to answer Centurion U/M/S questions and to act as a Quick Start Guide. It is not intended to be encyclopedic on the diagnostic/repair
More informationInstallation and User Manual Centurion Diagnostic Software
Installation and User Manual Centurion Diagnostic Software This Guide is intended to answer Centurion U/UI/M/I/S/HD questions and to act as a Quick Start Guide. It is not intended to be encyclopedic on
More informationDIRECT LINK FLASH TUNER
DIRECT LINK FLASH TUNER Quick Start Guide This Guide is intended to answer basic Direct Link tuning questions and to act as a Quick Start Guide. It is not intended to be encyclopedic on the tuning process
More informationDIRECT LINK FLASH TUNER
DIRECT LINK FLASH TUNER Installation and User Manual Rev 3.0 This Guide is intended to answer basic Direct Link tuning questions and to act as a Quick Start Guide. It is not intended to be encyclopedic
More informationS&S Cycle ProTune II
S&S Cycle ProTune II User Manual Contents 3 Table of Contents Foreword 0 Installation 7 1 System Requirements... 7 2 Installation... 7 3 Manual USB Device... Driver Installation 9 Windows XP Windows Vista
More informationTroubleshooter Quick Reference Guide
Troubleshooter Quick Reference Guide March 2008 EAZ0025B29B Rev. C Trademarks Acknowledgement Snap-on, Scanner, and Fast-Track are trademarks of Snap-on Incorporated. All other marks are trademarks of
More informationecuexplorer User Guide
Installation...2 Getting Started...3 User Interface...3 Menu Structure...3 Initial Configuration...4 Hotkeys...4 Navigation Tree...5 User-Defined Data Items...5 Known Trouble Codes...6 Saved Log Files...7
More informationecuexplorer User Guide
Installation...2 Getting Started...3 User Interface...3 Menu Structure...3 Initial Configuration...5 Hotkeys...6 Navigation Tree...7 User-Defined Data Items...7 Known Trouble Codes...8 Saved Log Files...9
More informationRelease Date: September 4, 2014
MV1DU User s Guide Release Date: September 4, 2014 Use of the MV1DU Diagnostic System requires an active license agreement or MV-1 Dealer Agreement. For information on obtaining a license, please email
More informationProcom PPC Software User s Manual
Procom PPC Software User s Manual Version 1.1 Procom Engineering Inc. 66 Maxwell, Irvine, CA 92618, USA Tel: 949-748 6338 Fax: 949-748 6339 Email: info@procomengineering.com www.procomengineering.com Contents
More informationPodium Data Analysis Software. User Manual. SWIS10 Version
SWIS10 Version Issue 1.00 March 2003 Contents 1 Introduction 5 1.1 What is Podium? 5 1.2 About This Manual 5 1.3 Typographical Conventions 6 1.4 Getting Technical Support 6 2 Getting Started 7 2.1 System
More informationWHIPPLE FLARE FLASH INSTRUCTION MANUAL
WHIPPLE FLARE FLASH INSTRUCTION MANUAL 2015 AND UP FORD MUSTANG WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of this manual is available, email
More informationWHIPPLE FLARE FLASH Instruction Manual
WHIPPLE FLARE FLASH Instruction Manual 2015 AND UP Ford MUSTANG/F150 WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of this manual is available,
More informationAiM Infotech. MoTec CAN Custom Data Set1. Release 1.01
AiM Infotech MoTec CAN Custom Data Set1 Release 1.01 This tutorial explains how to connect MoTec and AiM devices. 1 Software Setup MoTec devices need to be set up via MoTec ECU Manager software. Run it
More informationUNIVERSAL SOFTWARE. Universal Software. Data Sheet
Universal Software Data Sheet System Requirements: The minimum requirements for using the Software are: 1). Windows XP/Vista/7 2). A minimum of 512 MB RAM 3). 1 GB of hard disk space 4). Microsoft Office
More informationService Technical Resources MUT-III. (Multi-Use Tester-III*) Quick Reference Guide
Service Technical Resources MUT-III (Multi-Use Tester-III*) Quick Reference Guide *Cart not included May, 2003 INTENDED USAGE OF MUT-III MUT-II role after MUT-III Launch MUT-III is an essential special
More informationRIVA / Athena Pro-Series ECU
RIVA / Athena Pro-Series ECU USING SOFTWARE (MAYA) Running Maya for First Time Once installed, Maya is available in the Start menu under Programs -> Maya, or from a desktop short cut, if created. The first
More informationProfessional EFI Systems Product Catalog
Professional EFI Systems Product Catalog Table of Contents: Section 1: ECU Options 2-8 Section 2: Various Sensors and Switches 9-14 Section 3: Display Options 15 Section 4: CAN Communication Cable 16 Section
More informationWHIPPLE FLARE FLASH Instruction Manual
WHIPPLE FLARE FLASH Instruction Manual 2015 AND UP Ford MUSTANG/F150 WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of this manual is available,
More informationLogger Pro 3. Quick Reference
Logger Pro 3 Quick Reference Getting Started Logger Pro Requirements To use Logger Pro, you must have the following equipment: Windows 98, 2000, ME, NT, or XP on a Pentium processor or equivalent, 133
More informationVALCON EasyWriter Ver1.0E Manual
VALCON EasyWriter Ver1.0E Manual E05172-K00022-00 Published Dec.2010 Ver3-1.03 HKS Co., Ltd. Revision History Revision Date 2008/12/10 First Edition (Ver3-1.01) 2010/4/2 Second Edition (Ver3-1.02) 2010/12/22
More informationUser's Guide. For CarChip and CarChip E/X 8210 & 8220
User's Guide TM For CarChip and CarChip E/X 8210 & 8220 Product Number: 8210, 8220 Davis Instruments Part Number: 7395.064 DriveRight CarChip User s Manual Rev A (January 2, 2003) Davis Instruments Corp.,
More informationAccurate Lambda Meter ALM GUI. User Manual V1.3 COPY RIGHTS ECOTRONS LLC ALL RIGHTS RESERVED.
Accurate Lambda Meter ALM GUI User Manual V1.3 COPY RIGHTS ECOTRONS LLC ALL RIGHTS RESERVED Http://www.ecotrons.com Note: If you are not sure about any specific details, please contact us at info@ecotrons.com.
More informationU90 Ladder Software Manual. Version 3.50, 6/03
U90 Ladder Software Manual Version 3.50, 6/03 Table Of Contents Welcome to U90 Ladder... 1 Program Editors... 1 Project Navigation Tree...1 Browse Sequences...1 Printing Documentation...2 Interface Language...
More informationData Acquisition Instructions
Page 1 of 26 Form DAQ2_A 01/23/2007 Superchips Inc. Superchips flashpaq Data Acquisition Instructions Visit Flashpaq.com for downloadable updates & upgrades to your existing tuner. Page 2 of 26 Form DAQ2_A
More information12/2013. Installation Guide & User Manual
12/2013 Installation Guide & User Manual ABOUT THIS MANUAL This manual has been written to help you understand all the functions and capabilities of the Yamaha Snowmobile Diagnostic Tool in order to gain
More informationTable of Contents. Part I USB Communication. Part II User Interface. Part III User Settings (Tab Control) DFS-1000 Dataview. 2 File Menu.
2 Table of Contents Part I USB Communication 3 1 Important... Information 3 2 Connecting... Controller 3 Part II User Interface 4 1 Overview... 4 2 File Menu... 5 3 Options... Menu 6 4 Help Menu... 6 5
More informationWELCOME TO DYNOJET WINPV SOFTWARE
WELCOME TO DYNOJET WINPV SOFTWARE The Software Engineers at Dynojet understand your need to attain the maximum performance from the Harley Davidson motorcycles you evaluate and tune. For this reason, they
More informationMXL PRO 05 PLUG & PLAY KIT FOR SUZUKI GSX R YOSHIMURA RACING HARNESS cc
INSTALLATION DOCUMENTATION 18/11/2005 P&P KIT Installation Manual: MXL PRO 05 P&P kit for SUZUKI GSX R Yoshimura Racing Harness 2004 2005 1000 cc Version 1.00 Suzuki GSX-R Yoshimura Racing Harness 1000cc
More informationPodium Plus Data Analysis Software. User Manual. SWIS10 Version
SWIS10 Version Issue 1.10 February 2005 Contents 1 Introduction 6 1.1 What is Podium Plus? 6 1.2 About This Manual 6 1.3 Typographical Conventions 7 1.4 Getting Technical Support 7 2 Getting Started 8
More informationGM Service Information User Guide
GM Service Information User Guide General Motors Service Information User Guide SI 2014 GM Customer Care and Aftersales. Made in the U.S.A. All rights reserved. GMSi is a registered trademark of General
More informationWinTEC3 v3.0.0 Software User s Guide
WinTEC3 Engine Management Software WinTEC3 v3.0.0 Software User s Guide Contents Working With The WinTEC3 3.0.0 Engine Tuning Software... 4 System Requirements...4 TEC 3 Firmware WT300T3...4 WinTEC3 Software...4
More informationInstructions & Software Install Version 6.30a (Feb 2018) Copyright 2018 DealerTool.co.uk
DealerTool Instructions & Software Install Version 6.30a (Feb 2018) Copyright 2018 DealerTool.co.uk If you have any problems please email support@dealertool.co.uk Emails will always be responded to within
More informationAF PRG-1003 ASTROSTART TECH TOOL USER GUIDE
USER GUIDE Rev.: 1.0 PGa 2013 The PRG-1003 includes: AF PRG-1003 The handheld unit and a 9-volt battery; PRG-1003 Parts The PC-LINK adaptor, which enables communication between the PRG-1003 and a personal
More informationTROVIS-VIEW 4 Software TROVIS Operating Instructions EB 6661 EN. Electronics from SAMSON
TROVIS-VIEW 4 Software TROVIS 6661 Operating Instructions Electronics from SAMSON EB 6661 EN Edition January 2015 Definition of signal words DANGER! Hazardous situations which, if not avoided, will result
More informationHanatech Co., Ltd. I. Diagnostic Trouble Code
Hanatech Co., Ltd. Chapter 4 ULTRASCAN P1 Functions The functions you can choose when all the test vehicle details are selected properly are explained in this chapter of the manual. The actual list of
More informationSoft-Engine - Data store software: Version 8
Soft-Engine - Data store software: Version 8 Software description INERTIAL 8 BRAKER 8 is a new generation software for dynamometers. This is very a very and very performant software, but easy to use. Braker
More informationOBD Auto Doctor. User Manual for ios (iphone and ipad) Copyright 2018 Creosys Ltd
OBD Auto Doctor User Manual for ios (iphone and ipad) Copyright 2018 Creosys Ltd User Manual for ios (iphone and ipad) 1. Introduction 1.1 Platform and Hardware Requirements 1.2 Supported Adapters 1.3
More informationManual. Meter for BlueSolar DUO 12/24V-20A For RVs, Caravans and boats
Manual EN Meter for BlueSolar DUO 12/24V-20A For RVs, Caravans and boats CONTAINS: Wall mounting board, can be mounted in or on the wall. With 10 meter cable. MOUNTING DIMENSION: REMOTE METER DISPLAY:
More informationEXPRESS. Users Guide. Version 3.5
EXPRESS Users Guide Version 3.5 Table of Contents 1 System Overview... 3 2 System Requirements... 3 3 Contents in ECMTUNE System Box... 3 4 Installation Information... 4 5 Registration Information... 7
More informationOptions. Parts List. Optional Expansion Hub Optional Ignition Module Optional Memory Card
Options Optional Expansion Hub Optional Ignition Module Optional Memory Card View boost, speed, and gear on the LCD Display. View the ignition changes on the LCD Display. Log and store map data. Card storage
More informationPointWrite User Manual
PointWrite User Manual Table of contents Shipping contents... 3 Attaching the PointWrite to the projector... 4 Connecting the PointWrite to PC... 5 Pen action... 5 Exchanging the pen tip...5 Driver Installation...
More informationiobd2 MFi BT VAG Adapter User Manual
iobd2 MFi BT VAG Adapter User Manual VW, AUDI, SKODA, SEAT Preface Thank you for using this product. Please read instructions carefully before operating this unit. This manual guides the users how to operate
More informationX-431 Volkswagen Diagnosis. Table of Contents INTRODUCTION...1
Table of Contents INTRODUCTION...1 FEATURES...1 Advanced...1 Open...1 Integrative...1 Flexible...1 HARDWARE CONFIGURATION...2 PORTS AND INDICATORS...3 PRINTER OPERATION...4 Mounting Paper...4 Printing
More informationAll types of ECU use the same version of GuzziDiag. Click on the link for your operating system:
This is a basic howto for the GuzziDiag suite of tools, for use on the CARC series, Breva 750, V7 Classic, 1100 California & California 1400. This howto will show you how to connect, read (backup) your
More informationUSER MANUAL. Mouldflo Software (GUI) Mouldflo A/S Copyright 2016
USER MANUAL Mouldflo Software (GUI) Mouldflo A/S Copyright 2016 Mouldflo Software (GUI) User Manual Version 2.3 19 May 2016 TABLE OF CONTENTS 1. Introduction... 4 1.1 Symbols Used in the Graphical User
More informationRace Studio 2. Race Studio 2 Configuration User s manual. Race Studio Configuration: user s manual 1
Race Studio 2 Race Studio 2 Configuration User s manual Race Studio Configuration: user s manual 1 AIM s.r.l. reserves the right to make changes in the content of this manual without obligation to notify
More informationSUPERSCAN II. Always a step ahead.
SUPERSCAN II Always a step ahead. Operations Manual DEC Automotive Pedro Lozano 4453 Capital Federal C 1417 EEY Argentina Telephone +54 11 4567 1188 / 3994 Fax +54 11 4639 8643 http://www.decautomotive.net/
More informationPC Spa Dashboard Control User Guide
EL/GL Series - Mach 3 PC Spa Dashboard Control User Guide 900854 balboa-instruments.com Page 1 Page 2 PC SPA DASHBOARD The PC Spa Dashboard can be used with the EL8000, EL2000, EL1000 and GL systems. System
More informationAudi, Seat, Skoda and Volkswagen
Seat, Skoda and Volkswagen Audi, Seat, Skoda and Volkswagen ECU Version (VAG Mode 1) Selecting 'ECU Version' displays the following data for the selected control module: Part Number System Name Version
More informationCH1. Figure 1: M3 LOG Advanced
TECHNICAL DOCUMENTATION 03/09/2003 GAUGE Notes: M3 LOG Advanced technical documentation, dimensions and pinout. Ver 1.05 M3 LOG Advanced Internal lateral accelerometer CH1 Beacon Speed COM Power CH2 CH3
More information2007 Electronic Tools for DDEC VI
2006 Detroit Diesel Corporation and Technical Support. All Rights Reserved. Filename/6/6/2008 2007 Electronic Tools for DDEC VI 1 Using DDDL 7.0 I. The 2007 Electronic Tools Family of Products 2 3 Different
More informationHelmView 450 Model HV450. Operation Manual Section 78
HelmView 450 Model HV450 Operation Manual 00-02-0870 2015-04-16 Section 78 In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications
More informationTS508WF QuickStart Guide
QuickStart Guide BASIC FUNCTIONS EASY & FAST Activate All Known TPMS Sensors Read Sensor ID, Temperature, Pressure Read Sensor Battery Condition On-Tool OE Sensor Information Program MX-Sensor With Programming
More informationTROVIS-VIEW 4 Software TROVIS Operating Instructions EB 6661 EN. Electronics from SAMSON
TROVIS-VIEW 4 Software TROVIS 6661 Operating Instructions Electronics from SAMSON EB 6661 EN Edition August 2017 Definition of signal words DANGER! Hazardous situations which, if not avoided, will result
More informationDriveWizard Plus Instruction Manual
DriveWizard Plus Instruction Manual To properly use the product, read this manual thoroughly. MANUAL NO. TOEP C730600 20C Table of Contents Safety Symbols and Markings...4 Manual Overview...5 Related Manuals...5
More informationDisplay & Log Unit. Mikael Larsmark. November 22, 2006
Display & Log Unit Mikael Larsmark November 22, 2006 1 Contents 1 Introduction 3 2 Installation 4 2.1 Hardware.................................... 4 2.2 Software..................................... 4
More informationThe uscope Getting started
Introduction (fw 5.11) AES uscope Manual The uscope Getting started The uscope! A single channel, pocket-sized, digital storage oscilloscope that s small, quick, and powerful. Automotive presets get you
More informationSmart KM Link User Manual
Smart KM Link User Manual Table of Contents Table of Contents Overview...3 System Requirements...3 Features...3 Support Language...3 Getting Started...4 Changing the Settings...6 Keyboard & Mouse Control
More informationAVerMedia. AverDiGi EH5116 PRO. Quick Installation Guide
AVerMedia AverDiGi EH5116 PRO Quick Installation Guide i SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE THE INFORMATION CONTAINED HEREIN IS TO BE CONSIDERED FOR REFERENCE ONLY WARNING TO REDUCE
More informationMOTO M -1 Use s r manu n al
MOTO-1 User manual Operate introduction Dear user Your purchased tool is belong to the MOTO-1 series, it cover all our technology and experience in many years. The tool will be a very useful work partner
More informationCascade Configuration Tool
Cascade Configuration Tool Version 1.0.10 Installation and Operations Manual 00-02-0724 01-25-11 Section 40 In order to consistently bring you the highest quality, full featured products, we reserve the
More informationChris Frey May 3, 2013 ECET - CPET 491 Senior Design Project Phase II Project Advisor and Instructor: Professor Paul I. Lin
Chris Frey May 3, 2013 ECET - CPET 491 Senior Design Project Phase II Project Advisor and Instructor: Professor Paul I. Lin Goals Motivation Introduction Problem Statement / Solution Project Research Overall
More informationR4 Engine Programming Software
R4 Engine Programming Software Description: The R4 software is a Windows TM based software package that provides the user interface for a variety of Split Second engine management products. It controls
More informationCAUTION: CAREFULLY READ INSTRUCTIONS BEFORE PROCEEDING. NOT LEGAL FOR SALE OR USE IN CALIFORNIA OR ON ANY POLLUTION CONTROLLED VEHICLES.
Twin Tec User Instructions for Software CAUTION: CAREFULLY READ INSTRUCTIONS BEFORE PROCEEDING. NOT LEGAL FOR SALE OR USE IN CALIFORNIA OR ON ANY POLLUTION CONTROLLED VEHICLES. OVERVIEW software runs under
More informationEngineCheck. User manual Version January Gendan Limited
User manual Version 3.1 January 2013 sales@enginecheck.co.uk www.enginecheck.co.uk 2013 Gendan Limited Table of contents Installation 3 Activation 3 Using 4 Connecting to a car 5 Connection problems 5
More informationUSB Temperature and Humidity Data Logger Instruction Manual
USB Temperature and Humidity Data Logger Instruction Manual 1 4 2 3 5 1. Display 2. Set key 3. + key 4. - key 5. USB port - 1 - 1. Temperature 4 2. MAX/MIN value 5 3. Humidity 1 2 3 4. Memory status 6
More informationSECTION IIB DIAGNOSTIC MODES FOR 95Re LCD UNITS ONLY
SECTION IIB DIAGNOSTIC MODES FOR 95Re LCD UNITS ONLY Welcome Screen... 3 Workout Screen... 4 Main Menu... 5 System Test Menu... 6 System Diagnostics... 7 Test Engineering... 8 Telemetry Test... 9 LifePulse
More informationSamsung Digital Presenter Software User s Guide
Samsung Digital Presenter Software User s Guide Contents (Windows Program) Installing Samsung Digital Presenter Software...5 System requirements...5 Installing software...6 Connecting Samsung Digital
More informationSDL User s Manual. Contents. Introduction... 1 Overview Installation Sport Dash Manager Software... 23
MoTeC SDL User s Manual Contents Introduction... 1 Overview... 2 Display...2 Alarms...5 Data Logging...5 Other Functions...7 Measurement Inputs...8 Auxiliary Outputs...12 Communications Overview...13 ECU
More informationGDS - Basic Operation. Ver
GDS - Basic Operation Ver. 04. 06. 2010 Recovery Procedure GDS - Basic Operation Module: A 02-001-1 (p.01) Recovering the GDS Software WARNING When reinstallation procedure is performed, the contents of
More informationINTRODUCTION. Warning: it is strongly recommended to always verify whether the ECU needs specific software settings to export data.
Link G4 ECU INTRODUCTION AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which allow to easily connect your ECU to our hi-tech
More informationQuickie HHP Programming Tree
Program Operate Monitor Motor Controller General Creep DP Drive profiles System Actuators* Veer Comp Fwd Veer Comp Rev Latch speed step Soft stop Brake Parameters Enable encoders Dir Act SW1 Dir Act SW2
More informationOBDI RT Tuner Quick Start Guide
OBDI RT Tuner Quick Start Guide Revision A Page 1 Table of Contents Introduction...3 Minimum PC Requirements...3 Program Installation...3 Registering the Program...4 Select the Desired ECM Definition Files...6
More informationInstallation Instructions
Installation Instructions USM 4 Sensor Input Vnet Module Racepak PN: 230-VM-USM Racepak Data Systems 30402 Esperanza Rancho Santa Margarita, CA 92688 949-709-5555 www.racepak.com Table of Contents PRODUCT
More informationSECTION B: Anti-Theft Passive Anti-Theft System (PATS) DIAGNOSIS AND TESTING Procedure revision date: 05/23/2008
SECTION 419-01B: Anti-Theft Passive Anti-Theft System (PATS) 2009 Mustang Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: 05/23/2008 Anti-Theft Special Tool(s) 73III Automotive Meter 105-R0057
More informationMSK2. May 2012 Frankie Chan (IFAP ATV SMD SAE)
MSK2 SW framework May 2012 Frankie Chan (IFAP ATV SMD SAE) MSK2 SW Framework Provide small engine Hardware Platform to user to speed up the Engine Control Unit (ECU) development. The MSK2 SW framework
More informationAfter-Sales Service Technical Support Communication Letter. TB T31 Cannot erase DTC P1435 and cannot clear MIL.
Nissan Ireland PO Box 910 Naas Road Dublin 12 Technical Bulletin REFERENCE: MODEL: After-Sales Service Technical Support Communication Letter T31 X-TRAIL SUBJECT: TB T31 Cannot erase DTC P1435 and cannot
More informationINSITE Professional INSITE Lite INSITE RSGR. QSC8.3 and QSL9 User's Manual
INSITE Professional INSITE Lite INSITE RSGR QSC8.3 and QSL9 User's Manual Table of Contents Getting Started...1 What is INSITE...1 Registering INSITE...1 About...1 The Help System...2 Help Window...2 Help
More informationSoftware User s Manual
1 About the manual 2 Navigating the manual 2 3 Opening the control panel 3 Control panel overview 4 Control panel settings 5 Calibrating the interactive pen display 6 Adjusting frequency and tracking (VGA
More informationEMTRON AUSTRALIA EMTRON ECU OVERVIEW
EMTRON AUSTRALIA EMTRON ECU OVERVIEW Table of Contents 1.0 General... 3 2.0 Injection... 4 3.0 Ignition... 5 4.0 Digital Inputs... 6 5.0 Auxiliary Outputs... 7 6.0 Analog Inputs... 9 7.0 Crank and Cam
More informationPV101-C Configuration Software V3.2. Installation and Operations Manual Section 78
PV101-C Configuration Software V3.2 Installation and Operations Manual 00-02-0797 08-18-11 Section 78 In order to consistently bring you the highest quality, full featured products, we reserve the right
More informationPROGRAMMING INSTRUCTIONS
HOERBIGER Engine Solutions PROGRAMMING INSTRUCTIONS CPU-XL VARISPARK TERMINAL PROGRAM WARNING: WARNING: DEVIATION DEVIATION FROM THESE FROM INSTRUCTIONS THESE INSTRUCTIONS MAY LEAD MAY LEAD TO IMPROPER
More informationEcoCAL. User Manual for EFI V1.6 COPY RIGHTS ECOTRONS LLC ALL RIGHTS RESERVED.
EcoCAL User Manual for EFI V1.6 COPY RIGHTS ECOTRONS LLC ALL RIGHTS RESERVED Http://www.ecotrons.com Note: If you are not sure about any specific details, please contact us at info@ecotrons.com Index Page
More informationIS35 Color Display. User Manual ENGLISH. simrad-yachting.com
IS35 Color Display User Manual ENGLISH simrad-yachting.com Preface Navico is continuously improving this product, therefore we retain the right to make changes to the product at any time which may not
More informationitrax PC Replacement Quick Start Guide P/N Pre-Software Installation
Quick Start Guide P/N 60789-0 Use this procedure to upload the current software onto a new itrax PC. To access the newest software, contact ICS Technical Support at ics.tech.support@nordson.com. Follow
More informationVi-PEC V44 and V88 ECU
Vi-PEC V44 and V88 ECU INTRODUCTION Vi-PEC V44 and V88 No Adapter ECU AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which
More informationTHE StarSCAN FLASH FILES FOR THIS BULLETIN ARE AVAILABLE VIA THE INTERNET.
NUMBER: GROUP: 18-031-04 REV. A Vehicle Performance DATE: November 12, 2004 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may
More informationCL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0
CL7 DISPLAY QUICK START MANUAL 6YD-F819U-E0 Introduction WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. Device Overview
More informationIntroduction. Summary. Otasuke GP-EX! Introduction Summary. Intro-21. Development Environment Intro-4. Procedures of Creating New Screen
Introduction Summary Summary Intro-1 Development Environment Intro-4 Procedures of Creating New Screen Intro-5 Main Window Intro-6 Tips for man-hours reduction ~Full use of Work Space~ Intro-10 Simulation
More informationDigital Speed Controller User Manual
Diesel Engine for Generators Digital Speed Controller User Manual (DSC-1000) Ver_1.0 Doosan Infracore 페이지 1 / 36 Contents 1. Product Overview and General Specification 1.1 Product Information 1.2 Product
More informationTHE StarSCAN FLASH FILES FOR THIS BULLETIN ARE AVAILABLE VIA THE INTERNET.
NUMBER: GROUP: 18-013-05 REV. A Vehicle Performance DATE: April 19, 2005 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may
More informationOperation Manual for USB Autoscope Lite. Contents. USB Autoscope Lite Operation Manual
Operation Manual for USB Autoscope Lite Please read this manual thoroughly before attempting to operate the device. Contents 1. Purpose...2 2. Technical characteristics of the USB Autoscope Lite...2 2.1
More informationCourse Code: ServiceMaxx Overview and Snapshot Analysis Study Guide
Course Code: 8798 ServiceMaxx Overview and Snapshot Analysis Study Guide 2015 Navistar, Inc. 2701 Navistar Drive, Lisle, IL 60532. All rights reserved. No part of this publication may be duplicated or
More informationUser Manual Software for DSL Digital Speed Switch
User Manual Software for DSL Digital Speed Switch Software version from 0.9.9 Max-Dohrn-Str. 2+4 D-10589 Berlin Phone +49 (0)30 690 03-0 Fax +49 (0)30 690 03-104 info@baumerhuebner.com www.baumer.com Contents
More informationAEMLog Users Guide. Version 1.01
AEMLog Users Guide Version 1.01 INTRODUCTION...2 DOCUMENTATION...2 INSTALLING AEMLOG...4 AEMLOG QUICK REFERENCE...5 THE MAIN GRAPH SCREEN...5 MENU COMMANDS...6 File Menu...6 Graph Menu...7 Analysis Menu...8
More informationDataPro Designer Quick Start Guide
DataPro Designer Quick Start Guide Introduction The DataPro Designer application provides the user with the ability to configure the ULTRA-LITE PRO range of Auto Meter data acquisition products. Using
More informationUSB-Link 2 Vehicle Interface Installation and Setup Manual
USB-Link 2 Vehicle Interface Installation and Setup Manual Chapter 1: Introducing the USB-Link 2...1 Component Checklist...2 Product Specifications...3 System Requirements...4 Communication Options: Wired
More informationDynojet Research, Inc. All Rights Reserved. User Guide for the Power Vision and WinPV Software.
2010-2012 Dynojet Research, Inc. All Rights Reserved. User Guide for the Power Vision and WinPV Software. This manual is copyrighted by Dynojet Research, Inc., hereafter referred to as Dynojet, and all
More information