Embedded Storage Solutions Embedded SATA EDOM SATAIII SDM0F-V Series CDXXXXGRT-XX07XXXX with Shell - 1 -
Features: Compliance with Serial ATA Revision 3.1 specifications SATA3 (6Gb/s) interface Backward compatible with SATA1 (1.5Gb/s) and SATA2 (3Gb/s) interface ATA/ATAPI-8 and ACS-2 command set Data Set Management command (TRIM) SATA Device Sleep (DevSleep) Self-Monitoring, Analysis, and Reporting Technology (S.M.A.R.T) Capacities MLC: 8GB, 16GB, 32GB, 64GB, 128GB SLC: 4GB, 8GB, 16GB, 32GB Data Protection and Reliability Built-in hardware ECC, enabling up to 66-bit correction per 1KB Supports ATA8 security feature set Supports data secure erase Internal data shaping technique increases data endurance Software/Hardware write protect option Global wear leveling algorithm NAND Flash Type MLC, SLC Humidity 10 % to 95 %, non-condensing - Temperature ranges Operating: - Standard: 0 C to 70 C - Industrial: -40 C to 85 C Storage: - -55 C to 95 C - Supply voltage - 3.3 V ± 5% - Power consumption - Idle mode: 80 ma - Active mode(max): 320 ma - Form factor - SATA - Shock & Vibration - Shock: 1000G@ 1ms - Vibration: 20 G - Certification and Compliance - FCC - CE - RoHS - WEEE - Total Bytes Written (TBW) MLC: 8GB: 12TB 64GB: 96TB 16GB: 24TB 128GB: 192TB 32GB: 48TB SLC: 4GB: 120TB 16GB: 480TB 8GB: 240TB 32GB: 961TB - MTBF > 3,000,000 hours - 2 -
Revision History: Description Date 1.0 Internal release 2017/04/28-3 -
CONTENTS 1. Product Description... - 2-1.1 Introduction... - 2-1.2 Block Diagram... - 2-2. Product Specifications... - 3-2.1. Capacity... - 3-2.2. FW Function... - 3-2.3. SMART Attributes... - 4-2.4. SATA III Flash Module Interface... - 5-2.5. Device Goldfinger Pin Signal Definitions... - 5-3. Power Characteristics... - 6-3.1. Supply Voltage... - 6-3.2. Power Consumption... - 6-4. Mechanical Specifications... - 6-4.1. Dimensions... - 6-5. Reliability Specifications... - 7-5.1 Environmental Conditions... - 7-5.1. TBW(TeraBytes Written)... - 7-6. Product Ordering Information... - 8-6.1. Naming rule... - 8-6.2 Ordering information... - 8-7. Contact Information... - 10 - - 1 -
1. Product Description 1.1 Introduction ACPI SATA DOM SSD Module is an embedded SATA SSD SATA 6.0Gb/s interface. Using MLC NAND flash technology, the embedded flash module series offer supreme performance and prove reliability for operation in harsh environments with wide temperature range and high levels of shock and vibration. ACPI SATA DOM SSD Module can be widely adopted in various embedded applications. ACPI SATA DOM SSD Module SDM0F-V series is able to deliver exceptional read/write speed, making it the ideal companion for heavy-loading embedded or server operations with space constraints for host computing system. ACPI SATA DOM SSD Module provides for different angle of SATA module 90 and 180 version. ACPI SATA DOM SSD Module SDM0F-V series is protected by built in 66 bits per 1KB Error Correction Code (ECC). ACPI SATA DOM SSD Module SDM0F-V series has intelligent controller manages interface protocols, data storage and retrieval, defect handling and diagnostics, power saving modes, wear leveling and flash block management. ACPI can also provide specialized services to OEMs designing customized hardware and systems by offering: Locked BOM control with customer product change notification(pcn) Pre-installed software, custom software imaging and ID strings Custom packaging and labeling Comprehensive supply-chain management Customer specified testing Localized Field Application Engineering for complete pre and post-sale technical support Optional activity LED and write protect switch on requested. 1.2 Block Diagram - 2 -
2. Product Specifications 2.1. Capacity SLC: From 4GB up to 32GB MLC: From 8GB up to 128GB Raw Capacity Cylinder Head Sector Capacity LBA 4GB 7671 16 63 3.68GB 7733248 8GB 16383 16 63 7.37GB 15466496 16 GB 16383 16 63 14.7GB 30932992 32 GB 16383 16 63 29.4GB 61865984 64 GB 16383 16 63 58.9GB 123731968 128 GB 16383 16 63 117GB 247463936 Notes: One Sector = 512 Byte. 2.2. FW Function ECC Scheme URAT function GPIO S.M.A.R.T TRIM - 3 -
2.3. SMART Attributes The following table defines the vendor specific data in byte 2 to 361 of the 512-byte SMART data. Attribute ID Raw Attribute Value Attribute Name 0x01 MSB 0 0 0 0 0 Read error rate 0x05 LSB MSB 0 0 0 0 Reallocated sectors count 0x09 LSB MSB 0 0 Reserved 0x0C LSB MSB 0 0 Power cycle count 0xA0 LSB MSB 0 0 Uncorrectable sector count when read/write 0xA1 LSB MSB 0 0 0 0 Number of valid spare block 0xA2 LSB MSB 0 0 0 0 Number of cache data block 0xA3 LSB MSB 0 0 0 0 Number of initial invalid block 0xA4 LSB MSB 0 0 Total erase count 0xA5 LSB MSB 0 0 Maximum erase count 0xA6 LSB MSB 0 0 Minimum erase count 0xA7 LSB MSB 0 0 Average erase count 0xC0 LSB MSB 0 0 Power-off retract count 0xC2 MSB 0 0 0 0 0 Controlled temperature 0xC3 LSB MSB 0 0 Hardware ECC recovered 0xC4 LSB MSB 0 0 Reallocation event count 0xC7 LSB MSB 0 0 0 0 Ultra DMA CRC error count 0xF1 LSB MSB 0 0 Total LBAs written (each write unit = 32MB) 0xF2 LSB MSB 0 0 Total LBAs read (each read unit = 32MB) 0xF5 LSB MSB 0 0 Total Flash Written - 4 -
2.4. SATA III Flash Module Interface 2.5. Device Goldfinger Pin Signal Definitions Name Type Description S1 GND Shielding S2 A+ S3 A- Differential Signal Pair A S4 GND Shielding S5 B- S6 B+ Differential Signal Pair B S7 GND Shielding - 5 -
3. Power Characteristics 3.1. Supply Voltage Parameter Specifications Parameter Specifications Input Voltage 5V +/- 10% 3.2. Power Consumption Parameter Specifications Idle (max.) Active (max.) Specifications (W) 0.264W (3.3V * 80 ma) 1.1W (3.3V * 320 ma) 4. Mechanical Specifications Form Factor Width (mm) Length(mm) Height (mm) SATA III 23.7 40.66 4.45 4.1. Dimensions Notes: All dimensions are in millimeters - 6 -
5. Reliability Specifications 5.1 Environmental Conditions Environment Storage Temperature Operating Temperature Vibration Shock Humidity MTBF Specification 55 C ~ +95 C 0 C to 70 C (Standard) ; -40 C to 85 C (Industrial) 20G(7~2K Hz, 3 axes) 1000G(1ms, 3 times) Relative Humidity: 10-95%, non-condensing >3,000,000 hours Note1: Vibration reference standard IEC 60068-2-6 Note2: Shock reference standard IEC 60068-2-27 Note3: MTBF condition, Telcordia SR-332 5.1. TBW(TeraBytes Written) Endurance Capacity TBW SLC 4GB 120TB SLC 8GB 240TB SLC 16GB 480TB SLC 32GB 961TB Based on JEDEC JESD218A & 219A standard MLC 8GB 12TB MLC 16GB 24TB MLC 32GB 48TB MLC 64GB 96TB MLC 128GB 192TB - 7 -
6. Product Ordering Information 6.1. Naming rule 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 C D C 0 0 8 G R T - F 6 0 7 A 0 0 6 1~2. ACPI product CD: SATA DOM 3. F Operating Temperature C: 0 C to 70 C I : -40 C to 85 C 4~7: Capacity 16GB: 016G 32GB: 032G 64GB: 064G 8: Certification R: RoHS+REACH 9: Interface T: 7pin 10. Fixed Code - 11. Flash Type F: Toshiba SLC G: Toshiba MLC 12. Flash IC capacity 5: 32Gb 6: 64Gb 7: 128Gb 8: 256Gb 9: 512Gb 13~14. Controller Model 07: SM2246XT 17. Reserved code 0 18. Flash IC Generation 6: 24nm C: 15nm 15~16. Customer Code A0: ACPI Standard 6.2 Ordering information Model Name P/N Capacity Flash Type Temp CDC004GRT-F507A006 4GB CDC008GRT-F507A006 8GB SDM0F-V CDC008GRT-F607A006 CDC016GRT-F607A006 8GB 16GB Toshiba-24nm SLC Normal-Temp CDC016GRT-F707A006 16GB CDC032GRT-F707A006 32GB - 8 -
Model Name P/N Capacity Flash Type Temp CDI004GRT-F507A006 4GB CDI008GRT-F507A006 8GB SDM0F-VT SDM0F-VM SDM0F-VMT CDI008GRT-F607A006 8GB CDI016GRT-F607A006 16GB CDI016GRT-F707A006 16GB CDI032GRT-F707A006 32GB CDC008GRT-G607A00C 8GB CDC016GRT-G607A00C 16GB CDC016GRT-G707A00C 16GB CDC032GRT-G707A00C 32GB CDC032GRT-G807A00C 32GB CDC064GRT-G807A00C 64GB CDC064GRT-G907A00C 64GB CDC128GRT-G907A00C 128GB CDC016GRT-G707A0ZC 16GB CDC032GRT-G707A0ZC 32GB CDC032GRT-G807A0ZC 32GB CDC064GRT-G807A0ZC 64GB CDI008GRT-G607A00C 8GB CDI016GRT-G607A00C 16GB CDI016GRT-G707A00C 16GB CDI032GRT-G707A00C 32GB CDI032GRT-G807A00C 32GB CDI064GRT-G807A00C 64GB CDI064GRT-G907A00C 64GB CDI128GRT-G907A00C 128GB CDI016GRT-G707A0ZC 16GB CDI032GRT-G707A0ZC 32GB CDI032GRT-G807A0ZC 32GB CDI064GRT-G807A0ZC 64GB Toshiba-24nm SLC Wide-Temp Toshiba-15nm MLC Normal-Temp Toshiba-15nm MLC Wide-Temp - 9 -
7. Contact Information ACPI, a storage business company, specializes in the design and marketing of SSD, EDM, and Industry CF products. For further information, please reach us at the following contact information: ACPI Digital Co., Ltd. TEL: 886-2-7731-5188 FAX: 886-2-7731-5288 E-mail: sales@acpigroup.com Address: 11F.-3, No.186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) www.acpigroup.com - 10 -