TUBOCONTROL Measuring table for simple tube bending figures Rugged and precise measuring system for mobile and flexible utilisation Fast determination of length and angle values of single bends or simple tube geometries Determination of spring-back values and correction factors Sliding length stop equipped with a high-precise linear guidance Wear-resistant scanning of angles and lengths via magnetic tapes Different measuring possibilities by rearranging the length stops Ease of operation Technical data Measuring range (angles) 0-190 0-190 Measuring range (lengths) 0-480 mm 0-1000 mm Measurable tubes (OD) 55 mm / 90 mm 55 mm / 90 mm Measuring accuracy ± 0.1 mm, ± 0.1 ± 0.1 mm, ± 0.1 Dimensions (LxWxH) 705 x 600 x 90 mm 1200 x 600 x 90 mm Weight, approx. 25 kg 40 kg Power supply battery battery Subject to technical alteration 2010-11
TUBOSCAN S Optical measuring system for wire and tube bending parts TUBOSCAN S 60 TUBOSCAN S 200 Touch-less optical measuring of tube geometries within the blink of an eye Precise measuring results due to high-resolution camera technique Measuring of tubes, wires and bending parts with processed tube ends Tube measuring and evaluation software TeZetCAD with numerous practical functions Measuring system can be used for quality assurance as well as for correction of bending data Technical data TUBOSCAN S 60 TUBOSCAN S 200 Measuring volume (LxWxH) 540 x 420 x 200 mm 2000 x 800 x 400 mm Measurable tubes / pipes Ø > 2 mm Ø > 2 mm Camera technique 1 x CCD, 1280 x 1024 px 3 x CCD, 1280 x 1024 px Software TeZetCAD TeZetCAD Dimensions (LxWxH) 860 x 740 x 1950 mm 2420 x 1310 x 2160 mm Weight, approx. 150 kg 450 kg Operating voltage 230 V, 50 Hz 230 V, 50 Hz Power requirement 0.8 kw 0.8 kw
TeZetCAD Tube Software TeZetCAD standard : Basic measuring & evaluation functions for tubes (wires, hoses) and data storage of tube figures Determination and processing of XYZ and LRA bending data Nominal-actual value comparison of a measured tube with its master tube Leapfrog-function for continuous measuring of tubes, which range above the envelope of a coordinate measuring arm, Measuring of 180 bends (U-bends) TeZetCAD professional : Includes numerous tube processing and calculation features Automatic generation of sizing tools with complete documentation Visualization of 3D measured tube Figures according to 2D drawings and comparison of add-on pieces Import of tube data from various CAD systems via IGES interface Additional practical functions (e.g. alignment, comparison, correction, collision check, ) TeZetCAD design : Module for definition and modification of tube courses without limitation Further TeZetCAD options : Export of XYZ and LRA tube bending data via interfaces Linkage of existing NC tube bending machines Determination of tube courses within a default workspace 3D tube distortion function with automatic data modification
TUBOSCAN Portable coordinate measuring machines (CMM s) for tubes MICROSCRIBE measuring arm MICROSCRIBE measuring arm with laser scanner Ultra-portable, compact and lightweight design with carbon graphite composite arms for ease of transportation Measuring by means of different probes, tube measuring fork or line laser technology (depends on model) Counterbalance offsets the arm weight and allows for one-handed operation Tube measuring and evaluation software TeZetCAD with numerous practical functions Technical data MICROSCRIBE G2LX MICROSCRIBE MLX Axes configuration 6 axes 6 axes Measuring envelope 1670 mm 1670 mm Measuring accuracy ± 0.3 mm ± 0.08 mm Arm weight, approx. 3.8 kg 5.2 kg Operating voltage 100-240 V AC, 50/60 Hz 100-240 V AC, 50/60 Hz Subject to technical alteration 2010-11
TeZetCAD Tube Software TeZetCAD standard : Basic measuring & evaluation functions for tubes (wires, hoses) and data storage of tube figures Determination and processing of XYZ and LRA bending data Nominal-actual value comparison of a measured tube with its master tube Leapfrog-function for continuous measuring of tubes, which range above the envelope of a coordinate measuring arm, Measuring of 180 bends (U-bends) TeZetCAD professional : Includes numerous tube processing and calculation features Automatic generation of sizing tools with complete documentation Visualization of 3D measured tube Figures according to 2D drawings and comparison of add-on pieces Import of tube data from various CAD systems via IGES interface Additional practical functions (e.g. alignment, comparison, correction, collision check, ) TeZetCAD design : Module for definition and modification of tube courses without limitation Further TeZetCAD options : Export of XYZ and LRA tube bending data via interfaces Linkage of existing NC tube bending machines Determination of tube courses within a default workspace 3D tube distortion function with automatic data modification