Volume: 65 Questions Question No: 1 You are creating a SnapMirror relationship and custom SnapMirror policies are not defined. Which default policy will be applied in this scenario? A. MirrorAndVault B. Default C. SMDefault D. DPDefault Answer: D Question No: 2 You must determine if there have been any backup problems overnight. Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information? (Choose two.) A. Unresolved Incidents and Risks area B. OnCommand Unified Manager Dashboard C. OnCommand Cluster Events Details D. OnCommand Job Events Details Answer: B,D Question No: 3 You have created a new CIFS share but it is inaccessible. After verifying the export policy, network connectivity, junction path, and permissions are all correct, you realize there is root volume load-sharing mirror in place. What should you do next to make the share accessible? A. Update load-sharing mirror. B. Update the root volume policy.
C. Re-create the CIFS share. D. Modify the CIFS share permissions. Answer: C Question No: 4 You want to provide your team with a SnapProtect report that shows how many backups succeeded, were delayed, and failed over the last 30 days. You also want detailed information about the jobs, agents, and clients. Which CommCell report provides the necessary information? A. Backup Job Summary B. Activity C. Health D. SLA Answer: A Question No: 5 You are mirroring the root volume of a storage virtual machine (SVM) according to NetApp best practices. In this scenario, which two statements are true? (Choose two.) A. A mirror is only needed outside of the local HA pair. B. A mirror is needed on every node in the cluster. C. The mirrors are only needed on the nodes that do not host the source volume. D. The relationship should be set to LS. Answer: B,D Question No: 6 A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system. Which SnapMirror policy and relationship type should be used?
A. MirrorAndVault/Relationship Type DP B. MirrorAndVault/Relationship Type XDP C. MirrorAndVault/Relationship Type TDP D. MirrorAndVault/Relationship Type LS Answer: B Question No: 7 You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space. Which three actions are available to perform from the OCUM events detail Web page? (Choose three.) A. Add a note to the event. B. Create a job to move the FlexVol. C. Acknowledge the event. D. Increase the capacity of the FlexVol. E. Mark the event as resolved. Answer: C,D,E Question No: 8 You are installing a MetroCluster for clustered Data ONTAP consisting of FAS8080s. How are the high-availability interconnects cabled? A. High-availability interconnects are only needed for the remote connections between the nodes. B. High-availability interconnects are cabled both locally and remotely between the nodes. C. High-availability interconnects between the nodes are not needed. D. Each high-availability pair controller is cabled to its local partner. Answer: B
Question No: 9 You have downloaded a user-created OnCommand WorkFlow Automation (WFA) content pack from the NetApp communities Web site and want to import it into your environment. Which two statements are true in this scenario? (Choose two.) A. The file must be imported through the WFA Web portal. B. You must unpack the zip file before importing it. C. The.exe file can be run directly on the WFA server. D. The.obj file can be placed directly in the content folder on the WFA server. Answer: A,C Question No: 10 A customer is running clustered Data ONTAP 8.3 and wants to restore 15 files from a secondary SnapVault destination. The customer uses the command snapmirror restore -file-list. Which two statements are true about this operation? (Choose two.) A. The maximum number of files that you can select at the same time is one. B. The maximum number of files that you can select at the same time is eight. C. You can choose any destination volume for the restore, as long as the volume type is RW. D. You can choose any destination volume for the restore, as long as the volume type is DP. Answer: B,D Question No: 11 Beginning with OnCommand Workflow Automation 3.0, which feature allows you to download and manage your WFA workflow packs from the NetApp resources. A. Workflow Automation External Data Sources B. Workflow Automation Database C. Storage Automation Store D. Workflow Automation Community
Answer: C Question No: 12 Your customer wants to implement a mirroring solution between two NetApp controllers. Which solution would you recommend to the customer? A. Snapshot copies B. SnapRestore C. SnapMirror D. Snapcreator Answer: C Question No: 13 All of your CIFS file shares reside on a single NetApp volume. You are asked to ensure that your files are kept for seven days locally, and for 30 days off-site. What is the correct solution? A. Use SnapVoult locally for 7 days and use SnapMirror to a remote system for 30 days. B. Use SnapMirror locally for 7 days and use SnapMirror to a remote system for 30 days. C. Use SnapVoult locally for 7 days and use Snapshot to a remote system for 30 days. D. Use Snapshot locally for 7 days and use SnapVault to a remote system for 30 days. Answer: A Question No: 14 You have a NAS volume containing 100 GB of data and daily change rate of 10%. You want to keep seven daily Snapshot copies. What is the minimum size for the volume? A. 170 GB B. 100 GB
C. 110 GB D. 220 GB Answer: A Question No: 15 You are in a SnapProtect v10 solution environment creating a new subclient with NAS data. Besides the subclient name, what other information is mandatory? (Choose three.) A. the Snap Engine B. the backup content path C. the storage policy D. the backup schedule E. the retention policy Answer: A,C,D Question No: 16 You want to perform a health check of the MetroCluster synchronization status. Which two actions should you perform? (Choose two.) A. Run the MetroCluster Health Check tool from your administration host. B. On the cluster shell, use the metrocluster replication show command. C. In OnCommand System Manager, go to the Cluster in the MetroCluster section. D. On the cluster shell, use the metrocluster check run command. E. In OnCommand Unified Manager, go to the Cluster in the MetroCluster tab. Answer: B,E Question No: 17 You want to protect a clustered Data ONTAP 8.3 volume with a SnapMirror relationship. You choose not
to initialize the relationship during the Create Mirror Relationship workflow. In this scenario, which two statements are correct? (Choose two.) A. You can initialize the relationship later from the protection window in OnCommand System Manager. B. You can only initialize the relationship later from the command line. C. The baseline Snapshot copy will not be created on the primary system. D. The baseline Snapshot copy will not be transferred to the destination system. Answer: B,C Question No: 18 You have multiple load-sharing destinations for a volume in a storage virtual machine. The source volume has become unavailable and you want to make one of the destination volumes the new source. What happens to the original source volume? A. The promote operation deletes the original source volume. B. The promote operation takes the original source volume offline. C. The initialize operation deletes the original source volume. D. The original source volume goes offline. Answer: A Question No: 19 You have a network outage that affects client access to site A. You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B. Which two steps must you perform first? (Choose two.) A. Take the source volume offline. B. Break the SnapMirror relationship. C. Delete the SnapMirror relationship. D. Abort the SnapMirror relationship.
Answer: A,B Question No: 20 When creating a new workflow in OnCommand Workflow Automation, what is the correct order to apply commands in your new workflow? A. numerically 1-to-999 B. left to right, top to bottom C. largest to smallest D. alphabetically A-to-Z Answer: B Question No: 21 Given the command shown below: snapmirror policy add-rule vserver vs1 policy policy snapmirror-label weekly keep 52 What does this command do? A. It retains 52 weekly Snapshot copies on the destination volume. B. It retains 52 weekly Snapshot copies on the source volume. C. It retains 52 weekly Snapshot copies on the source storage virtual machine. D. It retains 52 weekly Snapshot copies on the destination storage virtual machine. Answer: D Question No: 22 On a Windows host, you want to make a consistent database backup of a physical SQL server where the database is on iscsi-connected LUNs on a clustered Data ONTAP 8.3 system. In addition to SnapDrive for Windows, which three NetApp software products should be installed to satisfy this requirement? (Choose three.) A. Microsoft iscsi Software Initiator B. OnCommand Workflow Automation
C. OnCommand Unified Manager D. iscsi Host Utilities E. SnapManager for SQL Answer: A,D,E Question No: 23 You want to have a NetApp FlexVol that can both grow and shrink dynamically as required by current capacity needs. Which settings will enable this feature? A. This can be enabled with the grow_shrink volume autosize mode. B. This can be enabled with the grow volume autosize mode. C. This can be enabled with the modify volume efficiency option. D. This can be enabled with the inline-compression volume efficiency option. Answer: A Question No: 24 The customer has experienced a disaster at their primary data center. You have implemented a SnapMirror relationship to meet their needs. You have performed the steps to make the destination volume read/write accessible to the clients. Which three actions should your consider doing while the customer makes the necessary repairs to their data center? (Choose three.) A. Implement a Snapshot copy schedule on the destination volume. B. Delete all Snapshot copies on the destination volume in preparation for a resynchronize operation. C. Verify that the destination volume has the same settings as the source volume for compression. D. Verify that the destination volume has the same settings as the source volume for deduplication. E. Delete all Snapshot copies on the source volume in preparation for a resynchronize operation. Answer: A,C,D
Question No: 25 You want to configure a SnapMirror transfer throttle to consume less network bandwidth. In the output of the snapmirror show command, which three statistics would you use? (Choose three.) A. Last Transfer Type B. Last Transfer Size C. Total Transfer Time in Seconds D. Last Transfer Error E. Last Transfer Duration Answer: B,C,D Question No: 26 How are the FC-VI links cabled in MetroCluster for clustered Data ONTAP? A. controller A is cabled to FC switch A, controller B has both cabled to FC switch B B. directly to the corresponding local HA partner C. one cable to each of the two local FC switches D. directly to the corresponding remote HA partner Answer: C Question No: 27 A customer wants to convert some SnapMirror relationships to SnapVault relationships. How would this be accomplished without creating a new baseline? A. Break and delete the relationship followed by SnapMirror resync. B. Break the relationship followed by SnapMirror delete. C. Break and delete the relationship followed by SnapMirror resync with relationship type XDP. D. Break the relationship followed by SnapMirror modify.