Diode Laser System Type: dst11-t193xx key switch, emergency stop, Interlock and LaserOn-signal Operation modes: cw, internal digital modulation, external Analog or Digital Modulation /Gate option rise- / fall-time ~ 50µsec front panel display with touch keys RS232-Interface, control software and labview VI is provided for download isolated electrical interface with 5V / 12V supply, SystemOk- and LaserOn-Output, LaserOn- and Modulation- Input various protection features for safety of the laser diode -with integrated Diode laser up to 500W optical output power metal armoured fiber cable, variable length air to water chiller laser diode provided from customer 19 3HU, 340mm depth, air cooled 19 3HU, 400mm depth, water cooled lpc_t193xx_rev5_varlas OsTech (c) 06.10.2015 2/4
Diode Laser System Support Connector Sub-D25 female Type isolated industrial interface isolated RS485 & USB optional PIN.No Abbr. Function 1 XO_ILOCK Interlock Output max. 12V 100mA 2 XO_LON Laser On - TTL- Output High = Laser On (pull-up restitor at 5V with 270R for LED f.e.) 3 XO_SYSOK System Ok - TTL-Output High = Laser, Temp. & System OK (pull-up restitor at 5V with 270R) 4 X5VREF External Reference 5V +-1% max. 20mA as potentiometer supply f.e. 5 XSUP-12 External Supply -12V max. 250mA 6 XSUP+12 External Supply +12V max. 250mA 7 XSUP5V External Supply 5V max. 250mA 8 XI_MODE0 TTL-Input - multipurpose mode select input 9 XI_MODE1 TTL-Input - multipurpose mode select input 11 XI_LaserOff TTL-Input Laser ON TTL-Low = Laser On internally pulled up 12 optional SUP_FAN Universal Supply - 2V..22V up to 800mA for external Fan etc. (! not isolated) 13 optional SUP_GND Universal Supply GND (! not isolated) 14 XI_ILOCK Interlock Input has to closed to XO_ILOCK 15 MOD_DMOD Modulation Digital Input TTL 16 MOD_GND Modulation GND 17 MOD_ANALOG Modulation Analog Input 0-4V 0A-Imax (Ri=10kOhm for 0-10V signal put 15kOhm in series) 18 XTX RS232-Tx 19 XRX RS232-Rx 20,21 XGND Xternal GND 4,23,24,25 n.c. Reserved pins Laser data Laser module type Diode laser modules from different well known manufacturers like Jenoptic, Dilas, Lumics... optical power 45W - 500W Wavelength 808nm -1940nm Fiber Core Diameter, Numerical Aperture 100 μm, NA 0.22 600µm, NA 0.22 Fiber connector F-SMA 905 up to 250W Options Pilot laser, power monitor, fiber sensor Configuration Examples Type Device Name Laser Assembled 375 dst11-la70v05-pa08v36-t19310-jold-75-cpxf-2p-v4-375 JOLD-75-CPXF 392 dst11-la70_120v05-pa08v36-jold-120-qpxf-375-392 JOLD-120-QPXF 463 dst11-la80v05-pa7_5v24_30-t19310-v0-a04-376-463 Prosario, 60W 466 dst11-la70v05-pa8v36-t19310-jold-75-fc-375-466 JOLD-75-FC 502 dst11-la70v26-t19312-v0-jold-400-caxf-6p2-502 JOLD-400-CAXF lpc_t193xx_rev5_varlas OsTech (c) 06.10.2015 3/4
808nm 100W High Power Fiber Coupled Diode Laser K808DA9RN-100.0W Features: 808nm wavelength 100W output power 200μm fiber core diameter 0.22 N.A. Applications: Solid-state laser pumping Medical use Material processing BWT Beijing s high power diode laser modules are manufactured by adopting specialized fiber-coupling techniques, resulting in volume products with a high efficiency, stability and superior beam quality. The products are achieved by transforming the asymmetric radiation from the laser diode chip into an output fiber with small core diameter by using special micro optics. Inspecting and burn-in procedures in every aspect come to a result to guarantee each product with the reliability, stability and long lifetime. Our research staffs are constantly improving and innovating the processing technology in the producing process, based on the professional knowledge and experience accumulated in long-terms. We are also continuously developing new products to meet customers specific needs. At BWT Beijing, to provide high quality products with reasonable price is our always goal. Tel: +86-10-8368 1053 Fax: +86-10-8368 2949 E-mail: sales@bwt-bj.com URL: www.bwt-bj.com
808nm 100W High Power Fiber Coupled Diode Laser K808DA9RN-100.0W Specifications(25 ) Symbol Unit K808DA9FN-100.0W Minimum Typical Maximum CW Output Power PO W 100 - - Threshold current Ith A - 1.4 - Operating current Iop A - - 9.5 Operating voltage Vop V - - 30 Reverse Voltage Vre V - 37.5 - Patameter (1) Slope Efficiency η W/A - 10 - Electrical-to-Optical Efficiency PE % 38 - - Center wavelength lc nm 805-811 Spectral width(fwhm) l nm - 5 - Back reflection wavelength Range nm 1040-1200 Back reflection isolation - db - 30 - Wavelength Shift with Temperature - nm/ - 0.3 - Life Time MTTF H - 10000 - Buffer diameter Dbuf μm - 400 - Cladding diameter Dclad μm - 220 - Core diameter Dcore μm - 200 - Fiber Data Numeric aperture NA NA - 0.22 - Fiber length (2) lc m 1.4 1.5 1.6 Connector (3) - - - SMA905 - Fiber Bend Radius - mm - 66 - ESD - V - - 500 Storage temperature - -20-70 Others Lead Soldering Temp Tis - - 260 Lead Soldering Time Tis sec - - 10 Operating case temperature Top 15-35 Relative Humidity 无 % 15-75 (1) Data measured under operation output at 100W. (2) Other length available upon request. (3) Other connector available upon request. Tel: +86-10-8368 1053 Fax: +86-10-8368 2949 E-mail: sales@bwt-bj.com URL: www.bwt-bj.com
808nm 100W High Power Fiber Coupled Diode Laser K808DA9RN-100.0W Package Dimensions (mm) Pins Function 1 LD(+) 2 LD(-) 3 Thermistor* 4 Thermistor* 5 PD(N)* 6 PD(P)* *:Typical function, can be customizable OPERATING NOTES Avoid eye exposure to direct or scattered radiation. ESD precautions must be taken. Please connect pins to wires by solder instead of using socket when operation current is higher than 6A. Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260 and time shorter than 10 second. Use constant current power supply. Avoid surge current. Laser diode must be used according to the specifications. Laser diode must work with good cooling. Operation temperature is 15 ~ 35. Storage: -20 ~ +70, all pins short-circuit. Declaration: information and specifications contained herein are deemed to be reliable and accurate. BWT Beijing reserves the right to change, alter or modify the design and specifications of these products at any time without notice. Tel: +86-10-8368 1053 Fax: +86-10-8368 2949 E-mail: sales@bwt-bj.com URL: www.bwt-bj.com