CUTTING, GRINDING AND FLAP DISCS

Made in Ukraine CUTTING, GRINDING AND FLAP DISCS from Ukrainian manufacturer CPC UKRABRAZYV Ltd 100% quality, 100% responsibility

CONTENT About company Products Our advantages ТМ SPRUT-A ТМ ТITAN ABRASIVE Production stages Structure and materials of discs Symbols of ТМ SPRUT-A discs Symbols of ТМ TITAN ABRASIVE discs Marking system for cutting discs Shapes of cutting and grinding discs bound with synthetic resins Structure and materials of flap discs Symbols of ТМ SPRUT-A flap discs Symbols of ТМ TITAN ABRASIVE flap discs Safe use and operation guideline Safety notes Trade stands Product catalogue ТМ SPRUT-A ТМ TITAN ABRASIVE Notes 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 19 20

About company CPC UKRABRAZYV Ltd, the Ukrainian manufacturer of abrasive tools of UNIVERSAL and PROFESSIONAL series, offers high-performance products designed for any abrasive treatment operations in all industrial market segments. The range of abrasive tools manufactured by the enterprise is known for its high quality among professional traders and demanding users. Continuous improvement of production processes ensures the development of new products, which guarantees additional quality advantages to consumers. In addition, UKRABRAZYV pays close attention to the implementation of technological innovations and to improving the qualitative characteristics of raw materials used to manufacture all existing products. Our abrasive tools correspond to the latest trends of the market, which are to remain relevant, to develop and to be demanded by the market. The quality of products of CPC UKRABRAZYV Ltd is annually confirmed by the Certificate of Compliance with DSTU GOST 21963-2003. It also has the European certificate EN12413. The quality management system for the production of abrasive tools meets the international requirements, which is confirmed by ISO 9001:2009 Certificate. In 2018, TM TITAN ABRASIVE was awarded the Certificate of MPA (Germany, Hanover). Demanding German experts confirmed its compliance with all the safety requirements of European standard EN 12413. Today, about 100 skilled specialists ensure the production. CPC UKRABRAZYV Ltd presents its products at domestic and international specialized exhibitions every year. The policy of our enterprise is aimed at continuous improvement of the quality of our products, offering best prices, high quality of service. UKRABRAZYV plant strengthens its position by continuously analyzing the market to make sure that the Company satisfies customer demands. Studying the business activity and product priorities allows better predict the needs of consumers and correctly understand the directions of market development. UKRABRAZYV plant establishes valuable partnerships with all its clients from the dealer to end customer through the introduction of an intensive marketing policy. Our goal is to be the number one brand. Principles of our relations with partners: honesty, sincerity, mutual benefit, responsibility. 3

Products UKRABRAZYV plant was established in December 2010. At that time, we mastered the manufacture of ТМ SPRUT-A cutting and grinding discs of UNIVERSAL series. In two years, based on our experts study of the experience of the world s leading manufacturers, integrating advanced technologies and continuous experiments we started manufacturing cutoff and ТМ TITAN ABRASIVE cutting and grinding disks of PROFESSIONAL series. In May 2016, the production capacity of CPC UKRABRAZYV Ltd was increased due to the commissioning of lines for the production of flap discs for processing metals and high-alloy steels. In February 2017, a line for the production of large diameter discs for industrial use was launched. In July 2017, the production of TM TITAN ABRASIVE flap discs of PREMIUM series for processing metals was started. The range of SPRUT-A and TITAN ABRASIVE tools includes more than 100 serial items: Cutting discs for metal with the diameter of 115 to 400 mm and the thicknesses of 0.8 mm to 4 mm (type 41); Grinding discs for metal with the diameter of 125 mm and the thickness of 6.0 mm to 8.0 mm (type 1, 27); Cutting discs for stone with the diameter of 125 mm to 230 mm and the thickness of 2.5 mm (type 41); INOX cutting discs with the diameter of 125 mm to 230 mm and the thicknesses of 1.0 mm to 2.5 mm (type 41); Aluminium Oxide cloth-based flap discs with the diameter of 125 to 180 mm (type 27, 29) (grids 36, 40, 60, 80, 100, 120); Zirconia alumina cloth-based flap discs with the diameter of 125 to 180 mm (type 27, 29) (grids 36, 40, 60, 80, 100, 120). Availability of 100% of the total declared range of products in our warehouses is the top requirement for CPC UKRABRAZYV Ltd managers 4

Our advantages WE ARE MANUFACTURER HIGH LEVEL OF PRODUCT SAFETY QUALITY ASSURANCE COMPETITIVE PRICES ALWAYS IN STOCK CUSTOM ORDERS FAST DELIVERY DEALERSHIP NETWORK

SPRUT-A TM SPRUT-A from CPC UKRABRAZYV Ltd the Ukrainian manufacturer of abrasive tools UNIVERSAL series This series is intended for the universal processing of a wide range of metals and high-alloy, steels, solid alloys, sheet metal, wires, pipes, fittings, metal profiles and corners. The best quality-price ratio, high performance with medium load are the main advantages of this series. The TM SPRUT-A products of Universal series are reliable abrasive materials with the excellent pricequality ratio for the saving customer. Bakelite-based cutoff and grinding discs - High speed of operation; - Significant level of safety; - Comfort for the user; - High-quality raw materials from the best domestic and European producers; - The best pricing policy; - Stability of established quality standards. Flap discs - High-quality surface treatment; - Grit cloth of high-quality abrasive material; - Easy to use in hard-to-reach places; - Processing and flattening in one operation; - Quality dust removal system; - Low noise level. TM SPRUT-A line is the right choice for those who appreciate their time and work with pleasure. 6

TITAN ABRASIVE ТМ TITAN ABRASIVE from CPC UKRABRAZYV Ltd the Ukrainian manufacturer of abrasive tools PROFESSIONAL series This is a new generation of performance, efficiency and cost-effectiveness. This series is based on the best experience of leading world manufacturers. It is intended for high-yield processing of all materials. The TM TITAN ABRASIVE products offer reliability, quality and safety confirmed by the strict quality control system. Bakelite-based cutting and grinding discs - Abrasive tool for professional use; - European quality; - High safety level; - High-quality raw materials from the best European producers; - Comfort and confidence for the user; - Maximum service life of the tool; - Minimum cost of one cut. Flap discs - Highest and stable quality of surface treatment; - Made of grit cloth of highest quality abrasive material from European producers and adhesives used for the production of similar products by world leading manufacturers; - Easy to use in hard-to-reach places; - Processing and flattening in one operation; - High-quality dust removal system; - Low noise level and temperature in the grinding area. ТМ TITAN ABRASIVE products a new generation of productivity, efficiency and cost-effectiveness. 7

Production stages Bakelite-based cutting and grinding discs consist of a mix of corundum grids, bakelite, fillers and functional additives, reinforcing fiberglass mesh. The production process is divided into 4 stages: 1 Cutting 2 Preparing fiberglass mesh. Fiberglass mesh is cut on an automated line. The density of mesh is of 70 to 420 kg/m2. The density of mesh depends on the disc size and meets the requirements of DSTU GOST 21963:2003. abrasive blend. The abrasive blend is prepared in a two-container mixer. Materials are weighed using floor electronic weights with a limit of weighing of 100 kg. Weighted electrocorundum and liquid bakelite resin in amount according to the formula are put into container No. 1. Pulverbakelite, chalk, cryolite, pyrite, barite in amount according to the formula are put into container No. 2. The components are mixed in mixer No. 1 for a certain time and for a few minutes in mixer No. 2. Then the mix from mixer No. 1 is transferred to mixer 2 and is mixed for a while until its homogeneous. The mixture is unloaded through a vibratory sieve into a container and transported to the workshop. Then it is poured into special bins. 3 Molding and pressing. The forming mix passes through the sieve and goes to the molding line. With the help of dispenser, the mixture is put into a form with black paper (fabric) and reinforced mesh. The mixture is flattened; the reinforced mesh, label and landing ring are put on it then. After pressing, work pieces are stacked in cassettes with teflon linings and molded slabs between. Cassettes with work pieces are pressed with springs and fed into the furnace for bakelization. 4 Bakelization. Thermal treatment is carried out in a bakelizer, which is an electric batch-operated furnace. Cassettes with work pieces are loaded into the furnace where they are heat-treated at a temperature of 80-160 C. The full cycle of bakelization is 24-36 hours. After cooling the cassettes are disassembled. Discs are visually inspected and checked on test stands. After that, they are stacked in bundles and transferred for packaging. 5 Packing. After the visual inspection and quality control, discs are counted and packed into boxes. Boxes are marked with labels. The boxes are put into a heat-shrink film if needed.

Structure and materials of discs 2 1 2 3 5 3 4 Synthetic cutting and grinding discs for hand-held and stationary tools include five components: 1 2 3 4 5 Safety ring fixing the disc on the tool spindle. Label with symbols and all needed information. Reinforcing fiberglass mesh a durable fiberglass fabric for the better reliability and transverse stability. Layers of reinforced fiberglass reinforce the disc and ensure safety. Depending on the thickness and purpose of the disc, 2-4 meshes are used. Abrasive material. Bond that keeps abrasive grain on the top of the disc. 9

Symbols of ТМ SPRUT-A discs 2 3 5 9 4 6 12 16 7 8 10 14 11 15 13 1 1 - Logo of UKRABRAZYV 2 - Trade mark logo 3 - Disc name 4 - Disc dimensions (L x H) D H L 5 - Disc diameter (D) 6 - Red safety strip 7 - Maximum operating speed 8 - Maximum allowable number of revolutions 9 - Technical data 10 - Purpose, usage are 11 - EAN, DSTU, GOST, ISO, ЕАC codes 12 - Type of disc 13 - Bar code 14 - Use and safety notes 15 - Manufacturer s address 16 - Safety ring with an expiration date Two types of ТМ SPRUT-A cutting and grinding discs Type 41 Type 27 10

Symbols of ТМ TITAN ABRASIVE discs 2 6 5 3 4 9 10 14 16 12 15 11 7 8 13 1 1 - Logo of UKRABRAZYV 2 - Trade mark logo 3 - Disc name 4 - Disc dimensions (L x H) D H L 5 - Disc diameter (D) 6 - Red safety strip 7 - Maximum operating speed 8 - Maximum allowable number of revolutions 9 - Technical data 10 - Purpose, usage are 11 - EAN, DSTU, GOST, ISO, ЕАC, МPA codes 12 - Type of disc 13 - Bar code 14 - Use and safety notes 15 - Manufacturer s address 16 - Safety ring with an expiration date Two types of ТМ TITAN ABRASIVE cutting and grinding discs Type 41 Type 27 11

MARKING SYSTEM FOR CUTTING DISCS Example: 14А F60 zi 39 41 43 BF М 2cl / А30 S8 BF Abrasive type Grit size Coarse Medium Thin Hardness grade Bond A - Standard aluminum oxide. (used for the production of cutting and grinding discs for metal) C - silicium carbide (used for the production of cutting discs for stone and concrete) 24 30, 36, 46 60 S BF synthetic resins with fiberglass reinforcement Color of safety strip Maximum allowable number of revolutions 60 m/sec 80 m/sec 100 m/sec Compliance with DSTU GOST / EN 12413 GOST 21963 ISO 14 A Corundum grade F 60 Grit zi 39 41 43 Sound index BF Bond mark (Bakelite) M For cutting metal 2cl Class of unbalance depends on the uniformity of mixing of the abrasive blend, the accuracy of disc form, pressure and bakelization A Electrocorundum grade 60 Grit S8 Hardness of bond BF Bond mark (Bakelite) Disc height H (thickness) Corundum grid 1 14A F46 zi 39 41 43 BF M 2cl/A46 S8 BF 1.2 14A F46 zi 39 41 43 BF M 2cl/A46 S8 BF 1.6 14A F46 zi 39 41 43 BF M 2cl/A46 S8 BF 2 14A F36 zi 39 41 43 BF M 2cl/A36 S8 BF 2.5 14A F30 zi 39 41 43 BF M 2cl/A30 S8 BF 3 14A F24 zi 39 41 43 BF M 2cl/A24 S8 BF 6 14A F24 zi 39 41 43 BF M 2cl/A24 S8 BF 12

Shapes of cutting and grinding discs Cutting discs H (0.8 mm 4.5 mm) Grinding discs H (3 mm 10 mm) Type 41 Type 27 Type 41 Type 27 Diameter of 115 mm (4 1/2 ) to 230 (9 ) mm for a hand grinder Diameter of 115 mm (4 1/2 ) to 230 (9 ) mm for a hand grinder Diameter of 115 mm (4 1/2 ) to 230 (9 ) mm for a hand grinder Diameter of 125 mm (230 ) (9 ) mm for a hand grinder Diameter of 300 mm (12 ) to 400 (16 ) mm for stationary grinders Safety pictograms and marks Respirator needed Eyeglasses needed No face grinding Ear protectors needed Gloves needed Read instructions before use

STRUCTURE AND MATERIALS OF FLAP DISCS 4 2 1 - Safety spindle ring 2 - Fiberglass base 3 - Glue base 4 - Abrasive cloth of aluminum oxide or zirconia alumina 5 - Label with symbols and all necessary information 3 1 5 SYMBOLS OF ТМ SPRUT-A FLAP DISCS 2 5 3 4 10 6 12 7 8 15 14 13 9 11 1 1 - Logo of UKRABRAZYV 2 - Trade mark logo 3 - Disc name 4 - Disc dimensions 5 - Disc diameter 6 - Red safety strip 7 - Maximum operating speed 8 - Maximum allowable number of revolutions 9 - Corundum name 10 - Purpose, usage area 11 - Bar code 12 - Type of disc 13 - Manufacturer s information, regulatory documents 14 - Use and safety notes 15 - Manufacturer s address 14

SYMBOLS OF ТМ TITAN ABRASIVE FLAP DISCS 2 10 5 3 4 12 14 15 7 8 6 13 9 11 1 1 - Logo of UKRABRAZYV 2 - Trade mark logo 3 - Disc name 4 - Disc dimensions 5 - Disc diameter 6 - Red safety strip 7 - Maximum operating speed 8 - Maximum allowable number of revolutions 9 - Corundum name 10 - Purpose, usage area 11 - Bar code 12 - Type of disc 13 - Manufacturer s information, regulatory documents 14 - Use and safety notes 15 - Manufacturer s address Shapes of flap discs Flap Discs Type 27 Type 29 Diameter of 115 mm (4 1/2 x 7/8 ) to 180 mm ( 7 x 7/8 ) for hand grinder Diameter of 115 mm (4 1/2 x 7/8 ) to 180 mm ( 7 x 7/8 ) for hand grinder Safety marks Respirator needed Eyeglasses needed No face grinding Ear protectors needed Gloves needed Read instructions before use 15

General Information UKRABRAZYV offers flap discs for different purposes. The base of the disc is made of fiberglass. The working surface is fabric-backed a brasive material ( aluminum oxide-based abrasive of UNIVERSAL series, zirconium alumina-based abrasive of PREMIUM series, which allows to solve any of your tasks.) The range of the proposed types of abrasive grains allows to grind any surfaces from coarse surface treatment (grain size from 36) to finishing (grain size from 120). When using flap discs, you get a lot of advantages in terms of ergonomics comparing to grinding discs. Therefore, noise can be reduced twice when grinding, vibration can be reduced as well. In addition, flap discs are usually lighter and require less pressing. Due to these features, they contribute to a positive working climate, allow to work without fatigue and save health. Flap discs and grinding discs diameter is 125 mm, 150 mm and 180 mm (with a spindle of 22.23 mm) for use on angle grinders. Depending on the nature of the application, you can choose between the flat and conical versions. Examples of usage: Deburring Finish grinding Rust removal Flattening Weld joint finishing SAFE USE AND OPERATION GUIDELINE UKRABRAZYV is taking seriously its responsibility to the consumer for safety, comfort and easy use of products provided. The company s products are developed and manufactured in accordance with the world standards in order to guarantee the best personal safety, minimize the risks and improve comfort for any operations. Applicable regulations: Certificate of Conformity UkrSEPRO DSTU GOST 21963.2003 ISO 9001 international Certificate of high safety use of abrasive tools. EN 12413 manufacture according to the safety standards of EN 12413. MPA (Hannover, Germany) compliance with the safety standard. 16

SAFETY NOTES Avoid incorrect use of cutting and grinding discs. Use hand grinders with discs reinforced with fiber. Do not use the angle grinder without a protective cover. The protective cover must be placed between the disc and the operator. This is necessary in case of destruction of the disc to protect the operator from pieces of the disc. Keep discs in dry places at room temperature. Keep away from rain, snow and do not use the tool in wet or damp areas. Do not use electric tools in areas where there is a risk of explosion or fire due to the presence of combustible materials, flammable liquids, paints, varnishes, gasoline, etc., aggressive environments, flammable gases and explosive dust. As a precautionary measure, it is advisable to consult a fire safety specialist regarding suitable fire extinguisher and methods of its use. Ensure good ventilation and wear suitable respiratory protection. Be sure to wear protective glasses and gloves. Failure to comply with this rule may result in sparks, abrasive dust, or even pieces of the disc getting in the eyes, which will lead to the serious damage. Use ear protectors. Use the tool for the intended purpose only. Do not use the tool for operations it was not designed for in the required capacity range (heavy work requires a tool designed for heavy working conditions, easy work requires a rather low-powered tool). Do not install damaged discs. Before you start, be sure to check the integrity of the abrasive disc it should not have even slightest cracks or chips. A disc that has been damaged (even if damages are invisible at first glance) as a result of a fall or impact cannot be used. This can lead to the destruction of the disc and cause injury. Use only those discs that are installed on the grinder spindle easily. The work piece you are working on must be securely fixed on the work surface. Hold the tool with two hands. It is necessary to use discs which correspond to hand grinder for all parameters: external diameter, thickness, spindle diameter. Avoid falling of tools and do not use their cables or air supply hoses as «handles». When grinder is touching the surface by gravity, cutting discs can easily break down. This is a common cause of discs breaking. When working with a disc, do not press on it from the side and avoid bending. Keep the hand grinder at the same angle while working. Follow the simplest rule: do the cutting - turn off the tool. It can be put on the table only after a complete stop of the disc. To avoid deformation, do not tighten the mounting nuts or mounting flanges too tightly. Never use damaged, contaminated flanges or flanges with bumps. Do not stop the disc rotation by pushing it towards the work piece by a lateral or end surface. To do this, always turn off the grinder and let the disc rotate freely by inertia until it stops. Do not rotate or press the disc during operation. Use grinders only in positions, in which you completely control the grinder and ensure its complete stability. Avoid excessive pressure on the disc, which can cause stops of grinder engine. 17

When metal is cut, the disc can be jammed. Hand grinder can push the work piece away or it can slip away. This can happen in a second so the operator should be ready for this situation and hold the grinder tightly. It happens with small grinders when the cutting or grinding goes on high-speed rotation. When cutting keep the disc straight, the pressure exerted on the disc should be only radial. When grinding the angle between the disc and grinding surface should be 20-30 degrees or more. Do not exceed the maximum revolutions per minute. Maximum work Diameter of the cutting disc (mm) / revolutions per minute speed 115 125 150 180 230 300 350 400 80 m/s 13300 12200 10200 8500 6600 5100 4400 3850 100 m/s 16650 16600 12700 10600 8300 6400 5500 4600 Clamping system The use of flanges of different diameters is prohibited. Both flanges between which a disc is put must be of the same outer diameter and have the same supporting surface. Correct Wrong PRODUCT ORDER Please contact our regional dealer for ordering the products of the UKRABRAZYV plant. You can find contact information of your regional dealer at (Dealers page). The dealer will provide information on: - Full range of products of the UKRBARAZYV plant; - Availability of goods in stock; - Product specifications; - Pricing and terms of sale; - Promotional and marketing promotion activities; - Certificates of Conformity to state quality standards; - Trade stands; - Consultations on key issues of product quality, scope, safety, etc. You can get the important technical information, as well as information on the service quality and the terms of giving you the status of a Dealer from the specialists of the UKRABRAZYV plant (Contacts page). We are interested in your positive opinion on Ukrainian manufacturer UKRABRAZYV plant! 18

TRADE STANDS from national manufacturer CPC UKRABRAZYV Ltd CASH DESK STAND ST331725 GENERAL- PURPOSE STAND TRANSFORMER ST170500500 The stand is made of dense cardboard and designed in the UKRABRAZYV corporate style. Advantages: easily assembled using grooves, easily transported and stored, light-weight. Can be used in the cashier area. Good for the presentation of products. This stand is made of steel and designed in the UKRABRAZYV corporate style. Advantages: easily assembled, can be set up to the wall or hanged. Also could be set up to stand on the floor. The stand has a convenient hanging system with hooks, provides good fixation and prevents stealing of products. Size 330 x 175 x 249 mm Material cardboard Number of discs 5 pcs Size 1,695 x 500 x 500 mm Material Steel Number of discs grinding: 140 pcs or cutting 160 pcs flap discs 24 pcs 19

PRODUCT CATALOGUE

ТМ SPRUT-A CUTTING, GRINDING AND FLAP DISCS - Cutting discs for metal Type 41 It is used for cutting metals, solid metals, alloys, metal sheets, wires, pipes, fittings, rails, metal rods, profiles and corners, channel beams, car bodies and many other structural products. It provides extra power for gasoline and electric tools, can be used on hand machines with a hydraulic drive. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 115 x 1,0 x 22 4 1/2" Х 1/25" Х 7/8" 13300 14А F46 zi 39 41 43 BF M 2cl 25 41 115 x 1,2 x 22 4 1/2" Х 1/21" Х 7/8" 13300 14А F46 zi 39 41 43 BF M 2cl 25 41 115 x 1,6 x 22 4 1/2" Х 1/16" Х 7/8" 13300 14А F46 zi 39 41 43 BF M 2cl 25 41 115 x 2,0 x 22 4 1/2" Х 2/25" Х 7/8" 13300 14А F36 zi 39 41 43 BF M 2cl 20 41 125 x 1,0 x 22 5" Х 1/25" Х 7/8" 12200 14А F46 zi 39 41 43 BF M 2cl 25 41 125 x 1,2 x 22 5" Х 1/21" Х 7/8" 12200 14А F46 zi 39 41 43 BF M 2cl 25 41 125 x 1,6 x 22 5 " Х 1/16" Х 7/8" 12200 14А F46 zi 39 41 43 BF M 2cl 25 41 125 x 2,0 x 22 5" Х 2/25" Х 7/8" 12200 14А F36 zi 39 41 43 BF M 2cl 20 41 125 x 2,5 x 22 5" Х 3/32" Х 7/8" 12200 14А F30 zi 39 41 43 BF M 2cl 20 41 125 x 3,0 x 22 5" Х 1/8" Х 7/8" 12200 14А F24 zi 39 41 43 BF M 2cl 20 41 150 x 1,6 x 22 6" Х 1/16" Х 7/8" 10200 14А F46 zi 39 41 43 BF M 2cl 25 41 150 x 2,0 x 22 6" Х 2/25" Х 7/8" 10200 14А F36 zi 39 41 43 BF M 2cl 20 41 180 x 1,6 x 22 7" Х 1/16" Х 7/8" 8500 14А F46 zi 39 41 43 BF M 2cl 25 41 180 x 2,0 x 22 7" Х 2/25" Х 7/8" 8500 14А F36 zi 39 41 43 BF M 2cl 20 41 180 x 2,5 x 22 7" Х 2/25" Х 7/8" 8500 14А F30 zi 39 41 43 BF M 2cl 20 41 180 x 3,0 x 22 7" Х 2/25" Х 7/8" 8500 14А F24 zi 39 41 43 BF M 2cl 20 41 230 x 1,8 x 22 9" Х 1/14" Х 7/8" 6600 14А F36 zi 39 41 43 BF M 2cl 20 41 230 x 2,0 x 22 9" Х 2/25" Х 7/8" 6600 14А F36 zi 39 41 43 BF M 2cl 25 41 230 x 2,5 x 22 9" Х 3/32" Х 7/8" 6600 14А F30 zi 39 41 43 BF M 2cl 20 41 230 x 3,0 x 22 9" Х 1/8" Х 7/8" 6600 14А F24 zi 39 41 43 BF M 2cl 20 41 300 x 3,0 x 32 12" Х 1/8" Х 1 1/4" 5100 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,0 x 25,4 14" Х 1/8" Х 1" 4400 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,5 x 25,4 14" Х 9/64" Х 1" 4400 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,5 x 32 14" Х 9/64" Х 1/4" 4400 14А F24 zi 37 41 BF M 2cl 10 41 400 x 4,0 x 32 16" Х 5/32" Х 1 1/4" 3850 14А F24 zi 37 41 BF M 2cl 10 41 14А corundum type, F60 (46, 36, 30, 24) corundum grit, zi 39 41 43 sound index, BF synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance 21

- RAIL cutting disc for metal Type 41 The disc for cutting rails is used on special machines rail saws. It is used for safe cutting of different parts: rails, corners, fittings, pipes, sheets, etc., made of steel, cast iron or hardened alloys. The rail cutting disc can even process hardened steel with the help of fine-grained abrasive material of high hardness and durability. The disc is reinforced by three fiberglass meshes with the density of 370 g/m2, which increases its stability, rigidity and durability. The high efficiency of this product is due to the ability to operate at extremely high linear speed 100 m/s. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 350 x 3,5 x 25,4 14" Х 9/64" Х 1" 5500 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,5 x 32 14" Х 9/64" Х 1/4" 5500 14А F24 zi 37 41 BF M 2cl 10 41 400 x 3,5 x 32 16" Х 9/64" Х 1 1/4" 4600 14А F24 zi 37 41 BF M 2cl 10 41 400 x 4,0 x 32 16" Х 5/32" Х 1 1/4" 4600 14А F24 zi 37 41 BF M 2cl 10 41 14А corundum type, F24 corundum grit, zi 39 41 43 sound index, BF synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance.

- Grinding discs for metal Type 27 Type 41 Grinding discs are used for excess metal elimination, weld joint and burr grinding. Conical grinding discs can be used in hard-to-reach places for processing corners, bends, and contour surfaces. Grinding discs are characterized by high performance, durability and ease of use. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 115 x 6,0 x 22 4 1/2" Х 1/4" Х 7/8" 13300 14А F24 zi 39 41 43 BF M 2cl 10 41 125 x 6,0 x 22 5" Х 1/4" Х 7/8" 12200 14А F24 zi 39 41 43 BF M 2cl 10 41 125 x 6,0 x 22 5" Х 1/4" Х 7/8" 12200 14А F24 zi 39 41 43 BF M 2cl 10 27 150 x 6,0 x 22 6" Х 1/4" Х 7/8" 10200 14А F24 zi 39 41 43 BF M 2cl 10 41 180 x 6,0 x 22 7" Х 1/4" Х 7/8" 8500 14А F24 zi 39 41 43 BF M 2cl 10 41 230 x 6,0 x 22 9" Х 1/4" Х 7/8" 6600 14А F24 zi 39 41 43 BF M 2cl 10 41 14А corundum type, F24 corundum grade, zi 39 41 43 sound index, BF synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance. - Cutting discs for stone Type 41 The discs are used for cutting stone, concrete, brick, limestone, graphite, marble, tiles, ceramics, slate. Characteristics: clean cutting edges, low level of dust formation, high operation efficiency, economic alternative for diamond cutting discs. Advantages of use: high level of safety in operation with reinforced concrete structures compared to diamond discs. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. 23

(mm) (inches) RPM Specification Quantity in package Type 125 х 2,5 x 22,23 5" Х 3/32" Х 7/8" 12200 54С 50 Н zi 39 41 BU NM 2cl 25 41 180 x 2,5 x 22,23 7" Х 3/32" Х 7/8" 8500 54С 50 Н zi 39 41 BU NM 2cl 25 41 230 x 2,5 x 22,23 9" Х 3/32" Х 7/8" 6600 54С 50 Н zi 39 41 BU NM 2cl 25 41 54C silicium carbide type, 50 H silicium carbide grit, zi 39 41 sound index, BU synthetic resins with fiberglass reinforcement, NМ for cutting non-metals, 2 cl 2nd class of unbalance. - INOX cutting discs for stainless steel Type 41 CPC UKRABRAZYV Ltd is the only manufacturer of special cutting discs of INOX series in Ukraine. The discs are designed to operate with stainless steel, galvanized steel, tool steel, soft steel and non-ferrous metals. Advantages of use: soft cut, high speed and easy cutting; high durability, cold cutting characterized by minimum heating while processing. For professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 125 x 1,0 x 22,23 5" Х 1/25" Х 7/8" 12200 14А 32 Н zi 37 39 BU M 2cl 25 41 125 x 1,2 x 22,23 5" Х 1/21" Х 7/8" 12200 14А 32 Н zi 37 39 BU M 2cl 25 41 125 х 1,6 x 22,23 5 " Х 1/16" Х 7/8" 12200 14А 32 Н zi 37 39 BU M 2cl 25 41 180 x 1,6 x 22,23 7" Х 1/16" Х 7/8" 8500 14А 32 Н zi 37 39 BU M 2cl 25 41 230 x 2,0 x 22,23 9" Х 2/25" Х 7/8" 6600 14А 50 Н zi 37 39 BU M 2cl 25 41 230 x 2,5 x 22,23 9" Х 3/32" Х 7/8" 6600 14А 50 Н zi 37 39 BU M 2cl 25 41 14А corundum type, 32 (50) H corundum grit, zi 37 39 sound index, BU synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance. Using discs that do not contain iron and sulfur prevents the formation of rust and oxidation, which is very important when working with stainless steel. 24

- Flap discs Type 27 Type 29 For personal and semi-professional use Raw material: Ukraine, CIS countries. For angle grinders Grit Aluminum oxide Zirconia alumina Quantity in package 36 40 60 80 100 120 type 27 (A, N) type 29 (A, N) type 27 (E, R) type 29 (E, R) 40 Material: Aluminum oxide (A, N) and Zirconia alumina (E, N) Application: Flap discs are used in a wide range of operations, namely removal of scales and bursts, finishing of edges and welds of parts and metal structures, stainless steel, non-ferrous metals, aluminum, wood, plastics, as well as grinding and finishing of the surface. Characteristics: There are two types of flap discs: flat for flat surface grinding and polishing, and conical for finishing hard-to-reach places, face and flat grinding, processing bends and corners, as well as flat and contoured surfaces.

ТМ TITAN АBRASIVE CUTTING, GRINDING AND FLAP DISCS - Cutting disсs for metal Type 41 The discs are used for cutting metals, solid metals, alloys, metal sheets, wires, pipes, fittings, rails, metal rods, profiles and corners, channel beams, car bodies and many other structural products. They provide extra power for gasoline and electric tools, can be used on hand machines with a hydraulic drive. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 115 x 1,0 x 22 4 1/2" Х 1/25" Х 7/8" 13300 14А F46 zi 39 41 43 BF M 2cl 25 41 115 x 1,2 x 22 4 1/2" Х 1/21" Х 7/8" 13300 14А F46 zi 39 41 43 BF M 2cl 25 41 115 x 1,6 x 22 4 1/2" Х 1/16" Х 7/8" 13300 14А F46 zi 39 41 43 BF M 2cl 25 41 115 x 2,0 x 22 4 1/2" Х 2/25" Х 7/8" 13300 14А F36 zi 39 41 43 BF M 2cl 20 41 125 x 1,0 x 22 5" Х 1/25" Х 7/8" 12200 14А F46 zi 39 41 43 BF M 2cl 25 41 125 x 1,2 x 22 5" Х 1/21" Х 7/8" 12200 14А F46 zi 39 41 43 BF M 2cl 25 41 125 x 1,6 x 22 5 " Х 1/16" Х 7/8" 12200 14А F46 zi 39 41 43 BF M 2cl 25 41 125 x 2,0 x 22 5" Х 2/25" Х 7/8" 12200 14А F36 zi 39 41 43 BF M 2cl 20 41 125 x 2,5 x 22 5" Х 3/32" Х 7/8" 12200 14А F30 zi 39 41 43 BF M 2cl 20 41 125 x 3,0 x 22 5" Х 1/8" Х 7/8" 12200 14А F24 zi 39 41 43 BF M 2cl 20 41 150 x 1,6 x 22 6" Х 1/16" Х 7/8" 10200 14А F46 zi 39 41 43 BF M 2cl 25 41 150 x 2,0 x 22 6" Х 2/25" Х 7/8" 10200 14А F36 zi 39 41 43 BF M 2cl 20 41 180 x 1,6 x 22 7" Х 1/16" Х 7/8" 8500 14А F46 zi 39 41 43 BF M 2cl 25 41 180 x 2,0 x 22 7" Х 2/25" Х 7/8" 8500 14А F36 zi 39 41 43 BF M 2cl 20 41 180 x 2,5 x 22 7" Х 2/25" Х 7/8" 8500 14А F30 zi 39 41 43 BF M 2cl 20 41 180 x 3,0 x 22 7" Х 2/25" Х 7/8" 8500 14А F24 zi 39 41 43 BF M 2cl 20 41 230 x 1,8 x 22 9" Х 1/14" Х 7/8" 6600 14А F36 zi 39 41 43 BF M 2cl 20 41 230 x 2,0 x 22 9" Х 2/25" Х 7/8" 6600 14А F36 zi 39 41 43 BF M 2cl 25 41 230 x 2,5 x 22 9" Х 3/32" Х 7/8" 6600 14А F30 zi 39 41 43 BF M 2cl 20 41 230 x 3,0 x 22 9" Х 1/8" Х 7/8" 6600 14А F24 zi 39 41 43 BF M 2cl 20 41 300 x 3,0 x 32 12" Х 1/8" Х 1 1/4" 5100 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,0 x 25,4 14" Х 1/8" Х 1" 4400 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,5 x 25,4 14" Х 9/64" Х 1" 4400 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,5 x 32 14" Х 9/64" Х 1/4" 4400 14А F24 zi 37 41 BF M 2cl 10 41 400 x 4,0 x 32 16" Х 5/32" Х 1 1/4" 3850 14А F24 zi 37 41 BF M 2cl 10 41 14А corundum type, F60 (46, 36, 30, 24) corundum grit, zi 39 41 43 sound index, BF synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance. 26

- RAIL cutting disc for metal Type 41 The discs for rail cutting are used on special machines rail saws. They are used for safe cutting of different parts: rails, corners, fittings, pipes, sheets, etc., made of steel, cast iron or hardened alloys. The cutting disc for rail can even process hardened steel with the help of fine-grained abrasive material of high hardness and durability. The disk is reinforced by three fiberglass meshes with the density of 370 g/m2, which increases its stability, rigidity and durability. The high efficiency of this product is due to the ability to operate at extremely high linear speed 100 m/s. For personal and semi-professional use Raw material: Ukraine, Europe. For rail saws. (mm) (inches) RPM Specification Quantity in package Type 350 x 3,5 x 25,4 14" Х 9/64" Х 1" 5500 14А F24 zi 37 41 BF M 2cl 10 41 350 x 3,5 x 32 14" Х 9/64" Х 1/4" 5500 14А F24 zi 37 41 BF M 2cl 10 41 400 x 3,5 x 32 16" Х 9/64" Х 1 1/4" 4600 14А F24 zi 37 41 BF M 2cl 10 41 400 x 4,0 x 32 16" Х 5/32" Х 1 1/4" 4600 14А F24 zi 37 41 BF M 2cl 10 41 14А corundum type, F24 corundum grit, zi 39 41 43 sound index, BF synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance.

- Grinding discs for metal Type 27 Type 41 Grinding discs are used for excess metal elimination, weld joint and burr grinding. Conical grinding discs can be used in hard-to-reach places for processing corners, bends, and contour surfaces. Grinding discs are characterized by high-performance durability and ease of use. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 125 x 6,0 x 22 5" Х 1/4" Х 7/8" 12200 14А F24 zi 39 41 43 BF M 2cl 10 41 125 x 6,0 x 22 5" Х 1/4" Х 7/8" 12200 14А F24 zi 39 41 43 BF M 2cl 10 27 150 x 6,0 x 22 6" Х 1/4" Х 7/8" 10200 14А F24 zi 39 41 43 BF M 2cl 10 41 180 x 6,0 x 22 7" Х 1/4" Х 7/8" 8500 14А F24 zi 39 41 43 BF M 2cl 10 41 230 x 6,0 x 22 9" Х 1/4" Х 7/8" 6600 14А F24 zi 39 41 43 BF M 2cl 10 41 (1) 14А corundum type, F24 corundum grit, zi 39 41 43 sound index, BF synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance. - Cutting discs for stone Type 41 The discs are used for cutting stone, concrete, brick, limestone, graphite, marble, tiles, ceramics, slate. Characteristics: clean cutting edges, low level of dust formation, high work efficiency, economic alternative for diamond cutting discs. Advantages of use: high level of safety in operation with reinforced concrete structures compared to diamond discs. For personal and semi-professional use Raw material: Ukraine, Europe. For angle grinders. 28

(mm) (inches) RPM Specification Quantity in package Type 125 х 2,5 x 22,23 5" Х 3/32" Х 7/8" 12200 54С 50 Н zi 39 41 BU NM 2cl 25 41 180 x 2,5 x 22,23 7" Х 3/32" Х 7/8" 8500 54С 50 Н zi 39 41 BU NM 2cl 25 41 230 x 2,5 x 22,23 9" Х 3/32" Х 7/8" 6600 54С 50 Н zi 39 41 BU NM 2cl 25 41 54C silicium carbide type, 50 H silicium carbide grit, zi 39 41 sound index, BU synthetic resins with fiberglass reinforcement, NМ for cutting non-metals, 2 cl 2nd class of unbalance. - INOX cutting discs for stainless steel Type 41 UKRABRAZYV LLC is the only manufacturer of special cutting discs of INOX series in Ukraine. The discs are designed to operate with stainless steel, galvanized steel, tool steel, soft steel and non-ferrous metals. Advantages of use: soft cut, high speed and easy cutting; high durability, cold cutting characterized by minimum heating while processing. For professional use Raw material: Ukraine, Europe. For angle grinders. (mm) (inches) RPM Specification Quantity in package Type 125 x 1,0 x 22,23 5" Х 1/25" Х 7/8" 12200 14А 32 Н zi 37 39 BU M 2cl 25 41 125 x 1,2 x 22,23 5" Х 1/21" Х 7/8" 12200 14А 32 Н zi 37 39 BU M 2cl 25 41 125 х 1,6 x 22,23 5 " Х 1/16" Х 7/8" 12200 14А 32 Н zi 37 39 BU M 2cl 25 41 180 x 1,6 x 22,23 7" Х 1/16" Х 7/8" 8500 14А 32 Н zi 37 39 BU M 2cl 25 41 230 x 2,0 x 22,23 9" Х 2/25" Х 7/8" 6600 14А 50 Н зи 37 39 BU M 2cl 25 41 230 x 2,5 x 22,23 9" Х 3/32" Х 7/8" 6600 14А 50 Н зи 37 39 BU M 2cl 25 41 14А corundum type, 32 (50) H corundum grit, zi 37 39 sound index, BU synthetic resins with fiberglass reinforcement, М for cutting metal, 2 cl 2nd class of unbalance.

- Flap discs Type 27 Type 29 For personal and semi-professional use Raw material: Ukraine, CIS countries. For angle grinders Grit Aluminum oxide Zirconia alumina Quantity in package 36 40 60 80 100 120 type 27 (A, N) type 29 (A, N) type 27 (E, R) type 29 (E, R) 40 Material: Aluminum oxide (A, N) and Zirconia alumina (E, R) Application: Flap discs are used in a wide range of operations, namely removal of scales and bursts, finishing of edges and welds of parts and metal structures, stainless steel, non-ferrous metals, aluminum, wood, plastics, as well as grinding and finishing of the surface. Characteristics: There are two types of flap discs: flat for flat surface grinding and polishing, and conical for finishing hard-to-reach places, face and flat grinding, processing bends and corners, as well as flat and contoured surfaces. - PREMIUM flap discs Type 29 For professional use. Raw material: Ukraine, CIS countries. For angle grinders. Grit Aluminum oxide Quantity in package 40 60 80 type 29 (A, N) 40 30

NOTES CONTACTS: CPC UKRABRAZYV Ltd 99 Lubovi Maloi ave., Kharkiv, 61020, Ukraine Tel.: +38(057)757-55-89 +38(067)381-72-71 +38(066)585-01-37 E-mail.: info@ 31

100% quality, 100% responsibility