Multifunctional Smart WiFi Camera BVCAM
Quick Guide for Multifunctional Smart WiFi Camera This product is a HD (1080P/25 frames) network camera equipped with an external memory card (TF card). It is a multifunctional high-tech product integrating shooting, photographing, motion detection alarm, APP real-time monitoring storage and multimedia playing. With 5 mega-pixel HD video, it can hold 128GB TF card and work for a long time. It can be operated more easily via APP. It can be hidden well and is the best tool for home antitheft and monitoring evidence capturing. I. Product structure Loudspe aker Camera Audio switch Audio input USB power (DC 5V) Indicator light Memory card Batter Reset Video switch
II. APP download (Fig.2.1) (Fig.2.2) 2.1 ios system: Scan the map (Fig.2.1) QR code, enter the download page (shown in Fig.2.2), and then select install. to download or directly in the application store (APP Store) search BVCAM to download and 2.2 Android system: Scan QR code in (Fig.2.1), enter the download page (Fig.2.2), select to download or click to enter Google Play, search the application software BVCAM to download and install. (Note: This installation oath is only applicable to Chinese Mainland.) III. Camera installation and usage 3.1 Installation 3.1.1 Remove the battery cover, and then insert the memory card (TF card) into the card slot. Note: 1. If there is no memory card (TF card), the product will not store the video content but does not affect other functions that are irrelevant to the memory card. 2. Insert and remove the memory card (TF card) when the product is not powered off. Otherwise the product and memory card will be damaged easily. 3. If you want to remove the memory card, just push the memory card slightly until it ejects automatically. 3.1.2 Remove the white battery separator and push the camera switch to ON to turn it on. 3.1.3 Cover the battery cover, supply the USB power, and put the product at a proper position. 3.1.4 The camera is started after the power is connected for about 30 seconds.
Note: 1. When the camera is used for the first time, the WiFi network has not configured yet, and the camera will restart after being started. The restart will take about 30 seconds and enter the WiFi hotspot mode for point-to-point connection between mobile phone and camera. It can be used to operate and configure the camera. 2. During start, the indicator light will be normally on or flickers to indicate the operating state. 3.2 Camera network configuration and usage 3.2.1 In the setting menu of mobile phone, turn on the wireless network (WiFi or WLAN) and connect the hotspot with the same name as the UID of the camera, as shown in (Fig.3.1). Note: If you cannot search the same name as the UID of the camera, long press the reset button for 10 seconds to restart the camera. 3.2.2 Click to start (APP) BVCAM 3.2.3 After starting the application software, click the search button (Fig.3.2) to search the camera (Fig.3.3). (Fig.3.1) (Fig.3.2) (Fig.3.3) 3.2.4 Connect the camera to the WiFi network for remote use. Method 1: Click Setting (Fig.3.4) to enter Advanced Configuration (Fig.3.5), and then click WiFi Connection Configuration (Fig.3.6). Select the available WiFi network from the pop-up window and enter the password, as shown in (Fig.3.7). (Fig.3.4) (Fig.3.5) (Fig.3.6) (Fig.3.7)
Method 2: Click the Add Device (Fig.3.8) and click Configured Device Connected to WiFi Network (Fig.3.9). Select the available WiFi network from the pop-up window (Fig.3.10), enter the password and then click Start Configuring WiFi (Fig.3.11). (Fig.3.8) (Fig.3.9) (Fig.3.10) (Fig.3.11) Method 3: Turn off the camera, remove the TF card, insert the card reader into the computer, and then open the file WiFi.txt to edit. As shown in (Fig.3.12) and (Fig.3.13), enter the WiFi network name behind the WiFi:, enter the password behind pwd:, and then insert the TF card into the camera and restart it. (Fig.3.12) (Fig.3.13) Note: 1. Modify as per text format; 2. Keep case-sensitive; 3. Enter the correct network name and password. 3.2.5 The camera will restart after the WiFi network is configured. Remote use can be realized after restart. Note: 1. If remote use is not realized or the camera is in off-line state after restart, long press the reset button for 10 seconds, and then repeat 3.2.1-3.2.4 after restart. 2. The WiFi network cannot be a hidden network, and the network name cannot have any space. 3.2.6 For the first-time use, format the TF card, as shown in (Fig.3.4) and (Fig.3.5). Click Setting to enter Advanced Configuration, click SD Card Video Setting, and then click Format. 3.2.7 Login password modification: When you log in with the original password (8888), a prompt for password modification will be given, and you may directly modify password according to the prompt. If the password has been modified, click Setting to enter Advanced Configuration (Fig.3. 4) and (Fig.3.5), and then click Modify
Access Password or Modify P2P Password. IV. Operation guide for administrator 4.1 Install the search tool IPCamera in the random disk to the computer. Note: The administrator's computer operation needs to be in the same LAN as the camera, and remote operation is not supported. 4.2 Click to search the networked device, as shown in (Fig.4.2). (Fig.4.2) 4.3 Double click the searched IP to enter the camera administration login interface, as shown in (Fig.4.3), enter the user name and password (the original user name is admin, and there is no password), and then click OK. (Fig.4.3) 4.4. After the above operations, enter the web interface, as shown in (Fig.4.4). Click to download the installation plug-in and the applicable language for the first-time use. (Fig.4.4) 4. 5 Click to enter the camera usage interface, as shown in (Fig.4.5). (Fig.4.5)
4.6 Click to enter the web setting administration interface, as shown in (Fig.4.6). You can perform application setting or download video files. (Fig.4.6) V. Multimedia audio 5.1 Audio startup Press the audio button to start audio. Then, the blue light is on. 5.2 Bluetooth connection 5.2.1 In the setting menu of mobile phone (Fig.5.1), open the Bluetooth options menu to search a Bluetooth device named Bluetooth music, and then click the name to connect, as shown in (Fig.5.2). (Fig.5.1) (Fig.5.2) 5.2.2 Open the multimedia player. 5.3 Audio input connection 5.3.1 Insert the 3.5 audio cable into the audio input port and insert the other end into the multimedia device (such as mobile phone and computer). 5.3.2 Open the multimedia device for media playing.
VI. Specifications Pixel Resolution Video format 5 million CMOS 1080P AVI Number of frames 25 Angle of view 240 Motion detection shooting 6 meters in straight line distance Minimum illumination Battery capacity Continuous recording time 1LUX 2400MA Above 24 hours Compression format H.264 Recording range 5m 2 Power consumption 260MA/5V Storage temperature -20-80 Operating temperature -10-60 Operating humidity Type of memory card Maximum capacity of 15-85%RH TF card 128GB memory card Play software Computer operating system Mobile phone operating VLCPlayer / SMPlayer Windows/Mac OS X Android/iOS system Web browser IE7 and above, chrome, firefox safari.etc Maximum visits 8 VII. FAQ 1. Remote monitoring is not smooth. Select the appropriate definition based on your current network environment. 2. The memory card does not work. For the first-time use, the memory card must be formatted once. 3. The network cannot be connected. Select the connection mode according to the nature of your network.
4. Remote video is not played smoothly at APP. As the decoding capacities of mobile phones are different, you may adjust your video to the definition which is appropriate to your mobile phone. 5. Password is forgotten. Reset the reset button directly for 10 seconds to restore factory settings. 6. As the software is constantly updated, there is a slight difference between user s manual and real-time operation. VIII. Precautions Usage occasion: You shall strictly abide by relevant national laws and regulations and may not use this product for other illegal purposes. Otherwise, you will be liable for the consequences caused thereby. Software upgrading: In order to achieve better product better performance, the factory will continue to improve the product software. You can easily upgrade the software by yourself. Please ask the local dealers for the latest software information and upgrading methods. Operating temperature: Please use the camera under natural temperature. Do not operate it at a temperature that is inadaptable to human body. Operating humidity: Please use the camera under the environment humidity that is suitable for human s life. Do not place the product in a damp operating environment. The product is not waterproof. Shooting illumination: Please use the camera in an environment with a sufficient light source. Do not directly expose the camera directly to the ultra-strong light source such as the sun so as to prevent the optical device from being damaged. Cleaning requirements: Do not use the camera in an environment with dense dust so as to prevent the lens and other components from being contaminated with dust and affecting the imaging effect. The lens can be gently wiped with wiping paper or glass cloth so as to keep it clean. Other matters: The camera is a precision electronic product. Do not impact or shake it violently. Do not use it in strong magnetic field and strong electric field.