DATASHEET
LED Fresnel Spotlight 330W - CRI>95 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F10HP is a high efficiency Fresnel lens spotlight using the innovative High Power 330W COB (Chip on Board) LED ARRAY, in combination with the DE SISTI Internationally Patented optical system for LED FRESNEL and with an enhanced CRI (Color Rendering Index) higher than 95 for appropriate chromacity performances. The Lighting Fixture is DMX Controlled from 0 to 100% with a super smooth Dimming and a negligible variation of Colour Temperature while controlling the Light intensity. The F10HP is available with either Tungsten (3.200 K) or Daylight (5.600 K) Balanced CCT (Correlated Color Temperature), in both cases with a CRI higher than 95 and both in Manual or Pole operated versions. The lighting Performances of the Tungsten Balanced CCT from medium to full flood are similar to those of a 2500W tungsten Fresnels, while the Daylight Balanced CCT is similar to a 800W HMI. The fixture combines the classical SPOT/ beam control on an equivalent FOCUS RANGE to a conventional lamp fresnel, with an excellent barn door cutting. It utilizes Standard accessories from the DE SISTI range of equivalent Fresnel Lens size, such as Barndoor, Color Frame, Cones, Scrims. MODEL DESCRIPTION F10THP.MO Super LED F10HP T - Tungsten CCT, Manual Operated F10THP.PO Super LED F10HP T - Tungsten CCT, Pole Operated F10DHP.MO Super LED F10HP D - Daylight CCT, Manual Operated F10DHP.PO Super LED F10HP D - Daylight CCT, Pole Operated WHAT S INSIDE FIXTURE HEAD 250 mm. (10 ) diameter Fresnel lens POWERCON IN & OUT PANEL CONNECTORS. XLR 5 Pin DMX IN & OUT PANEL CONNECTORS. 330W high power CRI>96 Built In Universal Power Supply 90-250V 50/60Hz DMX controlled. YOKES Manual Operated Versions Mod. LT320.110.40 M.O. yoke with 28,57 mm (B.S. 1 1/8 ) with top end for C clamp Pole Operated Versions Mod. 321.110.40 P.O. yoke with 28,57 mm. spigot (B.S. 1 1/8 ), with top end for C clamp ACCESSORIES Mod. 326.100 four leaf rotating barndoor Mod. 327.100 color frame CABLES Mod. 5403.135 3 mt. (9.8 ft) detachable Blue POWERCON power cable with bare ends. DMX cable is not included, to be ordered separately
DIMENSION Power to LED 330W - DC current to the LED - flicker free Rated Voltage & PFC 90-250V 50-60Hz PFC 0,96 Power consumption Power Connection DMX Data link USITT DMX512-A DMX Channels LED ARRAY Lifetime CCT 400W @ 230V 400W @120V powercon IN & OUT 5-pin XLR for DMX in & out. Use shielded data cables. Do not overload the daisy chain. Up to a maximum of 32 devices can be used on a single DMX chain. 1 @ 8bit 2 @ 16bit 50.000 hours with 70% Lumen Maintenance. The LED ARRAYS are tested and certified up to LM80 T: 3.200 K D: 5.600 K CRI / TLCI T: 97 / 96 D: 96 / 97 Protection Type Max. Housing Surface Temperature Weight of Fixture Weight of Barndoor Weight of color frame Barndoor ring diameter Scrims & color frame diameter IP22 70 C FEATURES M.O. 13,5 Kg (29.7 lb) P.O. 14,8 Kg (32.5 lb) 4 leaf 1,4 Kg (3.09 lb) 8 leaf 1,65 Kg (3.64 lb) 0,28 Kg (0.62 lb) Lens diameter 250mm / 10 Seat: 314mm / 12 1/3 - Accessory: 313mm / 12 1/3 Seat 306mm / 12 - Accessory: 305mm / 12 250 mm. (10 ) diameter high quality, shock resistant Borosilicate glass Fresnel lens on spring supports. Rugged and lightweight Carbon Steel Housing with low glare black epoxy powder coating and reinforces internal double walls. High efficiency Self Stabilizing Active Cooling: automatic, thermal stabilization of the LED operating temperature is managed by an internal thermal sensor and CPU, variable speed fan and heat sink to maintain the LED Array s constant temperature at a maximum of 65 C. The hydro dynamic bearing fan operates silently with a very low RPM. Special Patented Optics for LED Technology. M.O. Helix Screw driven focus mechanism which guides Teflon bushings supported LED ENGINE along 2 rods. This ensures smooth operation during focusing in any tilting position of the fixture. The Teflon bushings also provide a wiping action, which cleans the steel guide rails during focus. FEATURES P.O. The unit is equipped with a hinged lens door and wire guard. One of the 4 accessory brackets has a spring loaded locking knob to safely secure external accessories. Accessories have been designed for one hand installation. Available with either positive lock manual yokes for comfort and ease of handling, or pole operated yokes which can be used via the lighting pole for Panning and Tilting the lights as well as manually, since the mechanical activators are equipped with clutches.
Central Light intensity (Candle Power) SPOT 26.051 cd 132.685 cd PHOTOMETRICS // LED F 10 HP 2.895 lux 269 FC 14.743 lux 1,370 FC Illumination center values at Distances 3.200 K TUNGSTEN BALANCED C.C.T. (Correlated Color Temperature) - 330W (CRI 97) - TLCI: 97 1.042 lux 97 FC 5.307 lux 493 FC 261 lux 24 FC 1.327 lux 123 FC 5.600 K DAYLIGHT BALANCED C.C.T. (Correlated Color Temperature) - 330W (CRI 95) - TLCI: 95 27.000 cd 3.000 lux 279 FC 1.080 lux 100 FC 270 lux 25 FC TLCI SPOT 164.250 cd 18.250 lux 1,695 FC 6.570 lux 610 FC 1.643 lux 153 FC TUNGSTEN CCT 3 mt 9.8 ft 5 mt 16.4 ft 10 mt 32.8 ft Light beam diameter with Beam Angle (50% of center value) 3 mt 9.8 ft 5 mt 16.4 ft Beam Sizes 10 mt 32.8 ft DAYLIGHT CCT 54 SPOT 12 3,06 mt 10.0 ft 0,63 mt 2.1 ft 5,10 mt 16.7 ft 1,05 mt 3.4 ft 10,19 mt 33.4 ft 2,10 mt 6.9 ft Light beam diameter with Field Angle (10% of center value) 77 4,77 mt 15.7 ft 7,95 mt 26.1 ft 15,91 mt 52.2 ft SPOT 22 1,17 mt 3.8 ft 1,94 mt 6.4 ft 3,89 mt 12.8 ft LUX AT ANY DISTANCE = Candle Power: [Distance(in m.)] 2 F.C. AT ANY DISTANCE = Candle Power: [Distance(in ft)] 2
F10XHP.XO.DIN adder code to order DIN Spigot 325.310 Stainless Steel wire guard 326.100 Four leaf rotating barndoor 326.200 Eight way rotating barndoor 327.100 Color Frame 328.100 Cone with two discs (with front aperture diameter: 70 mm. 50 mm. 30 mm.) 329.100 Set of scrims - Stainless steel 329.101 Full single scrim - Stainless steel 329.102 Full double scrim - Stainless steel 329.103 1/2 single scrim - Stainless steel 329.104 1/2 double scrim - Stainless steel 91.210 Aluminum black painted C clamp to hang fixtures overhead and for mounting on pipe with diameters up to 52 mm. (2 ), with safety pin (no adapters) 93.102 Extruded black C clamp with M 12 threaded stud 93.103 Extruded black C clamp with M 10 threaded stud 20.100 Safety cable 800 mm. long with 4 mm. diameter steel rope and safety catch. LT320.110.40 Steel tube Manual Operated stirrup with 28,57 mm. spigot (B.S. 1 1/8 ), with top end for attachment to C clamp. LT320.300.40 Steel tube Manual Operated stirrup with 28,00 mm. spigot (D.I.N 1 1/9 ) LT320.220.40 LT321.110.40 OPTIONALS & ACCESSORIES Steel tube Manual Operated stirrup with M 12 Threaded hole Pole operated stirrup with 28,57 mm. spigot (B.S. 1 1/8 ), with top end for attachment to C clamp. 321.300.40 Pole operated stirrup with 28,00 mm. spigot (D.I.N 1 1/9 )