ETC. Source Four XT HID Zoom W. HID Exterior Series ORDERING INFORMATION GENERAL INFORMATION. Source Four XT HID Zoom W FEATURES

Transcription

1 Source Four T HID Zoom W GENERAL INFORMATION ETC s Source Four T HID is a Source Four spotlight for all-weather use. Powerful Source Four optics, light output and energy savings in a sleek IP66-rated watertight/dustproof design. T features ETC s Source Four Zoom 15 to 30 optical system plus our longlife 12,000-hour, 150W HID lamp. Hang by yoke, place on ground, attach to poles and other structures the rugged T handles any habitat wet-location use, exposed architectural installations, entertainment venues, themed environments, and beyond. FEATURES Low copper die-cast and extruded aluminium construction Stainless-steel, metric hexagonal hardware at all external locations 150W Ceramic Metal Halide Lamp, 12,000 hour life (not dimmable) Integral 230V electronic ballast, with greater than 90% efficiency Unique, water-tight design completely seals the optical chamber Removable barrel for easy focus Barrel hangs on yoke for hands-free operation Tilt-down ballast housing for lamp change, without disturbing focus 15 to 30 zoom range with high efficiency optics Dual internal pattern holders suitable for B-size metal or glass gobo patterns and dichroic colour Two-plane stainless steel shutter assembly with shutter rotation CE compliant Ingress Protection: IP66 Mechanical protection rating: IK09 Effective Projected Area (EPA):1.40 ORDERING INFORMATION Source Four T HID Zoom W 7065A A A A For custom colours, please call ETC. Source Four T 15 to 30 Zoom, 230V/150W, with standard yoke, Black. Source Four T 15 to 30 Zoom, 230V/150W, with standard yoke, White. Source Four T 15 to 30 Zoom, 230V/150W, with standard yoke, Bronze. Source Four T 15 to 30 Zoom, 230V/150W, with standard yoke, Custom Colours. ETC Source Four 150W HID Zooms are supplied with Philips CDM MasterColor 150W 3000K ceramic metal halide lamp, steel pattern holder and 1.8m cable as standard. 1 of 6

2 Source Four T HID Zoom W SPECIFICATIONS PHSICAL Low copper die-cast aluminium rear housing (A360 grade) Copper-free extruded aluminium barrel (6061-T6 grade) Stainless steel, metric hex-head hardware at all fixing points and openings (316 and 18/8 grade) Separate hex-head wrench sizes for aim/tilt/re-lamp (5 mm, 8mm, 4 mm respectively) Tilt-down ballast housing with single captive-screw release Pre-wired with 1.8m cable w. bare ends Removable ballast service plate with captive screws and EPDM gasket Lamp access from rear without breaking focus Lamp cap uses four captive screws with orientation retainer and EPDM gasket Heat-resistant, 22mm tempered glass front lens Front of barrel has four tapped mounting holes for accessories Removable barrel for easy focus Barrel mounts only one way with internal locating pin Barrel hangs from yoke side in any orientation Triple-point barrel seal with self-compressing design High-temperature silicone main gasket at barrel Extruded aluminum optical rails with positive locking lens holders 20-gauge stainless steel shutters in a bi-plane assembly 6-point stainless steel spring shutter retention system Dual internal gobo holders for B-size metal or glass patterns or dichroic colours. Standard steel yoke allows +45 to -40 tilt when bracket or pole mounted Standard steel yoke allows +12 to -7 tilt when ground (pad) mounted Long yoke allows +90 to -35 tilt Triple-bolt yoke mounting for swivel or fixed positioning (½ Center bolt and 3/8 side bolts) Stainless steel Nord-Lock bolt-securing systems at yoke tilt point Optional die-cast aluminium front lens holder for up to two filters Optional welded aluminium half-shield for front glare control Ingress Protection rating: IP66 Mechanical protection rating: IK09 Fixture has an Effective Projected Area (EPA) of 1.40 THERMAL Front Lens Temperature 35 C Operational Temperature range: -30 C to + 40 C SPECIFICATIONS ELECTRICAL 150 watt, high-power factor, fully encapsulated electronic ballast Less than 14 Amps inrush current, lasts less than one AC cycle (16.7mS) NOTE: Select breakers that meet or exceed the in-rush and ampacity requirement Integrated thermal protection Microprocessor controlled safety shutdown and end-of-life protection Complies with FCC 18C Minimum Starting Temperature : -30 C Class A Sound Rating Less than 10% Harmonic distortion Greater than 95% Power Factor 90% Ballast Efficiency 230V (Nominal) Ballast 230V±10%, 50Hz 0.69 Amps operating current High-temperature lamp socket and socket lead wires OPTICAL Re-optimized optical system for improved photometric performance and field uniformity Faceted borosilicate reflector with dichroic cold mirror coating removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light Reflector and lenses secured with anti-vibration shock mounts Two bi-convex lenses with anti-reflective coatings Low gate and beam temperature, shutters will not warp or distort LAMP 150W Ceramic metal halide ETC Source Four T HID is shipped with a 150W Philips MasterColor CDM lamp 3000 K color temperature (nominal) 12,000 hrs. lamp life Colour Rendering Index (CRI) second ignition time 3 minutes to 90% light output (run-up) 15 minute re-ignition time (cool-down) 14,000 initial lumens 95 Lm/W efficacy Optional 150W Philips MasterColor CDM 4,200 K colour temperature (96 CRI) lamp available 2 of 6

3 Source Four T HID Zoom W PHOTOMETRICS Photometric data below is measured with a Philips CDM MasterColor 150W (3000K) ceramic metal halide lamp. To convert data when using any other HID lamp, use the lumen or candela multiplying factors (Lm MF or Cd MF) for that specific lamp. For lumen data, multiply by the Lm MF. For candela or footcandle data, multiply by the Cd MF Throw Distance (d) 3.0m 4.6m 6.1m 7.6m Field Diameter.7m 1.0m 1.4m 1.7m Illuminance (fc) 1, Illuminance (lux) 16,759 7,449 4,190 2,682 Beam Angle Field Angle Source Four T HID Zoom W set at Narrowest (cosine) Degree Field Beam Efficiency per watt Narrowest 155,700 3,970 3, % 26.5 Metric Conversions: For Meters multiply feet by.3048 For Lux multiply footcandles by For Field diameter at any distance, multiply distance by 0.23 For Beam diameter at any distance, multiply distance by Throw Distance (d) 3.0m 4.6m 6.1m 7.6m Field Diameter 1.3m 1.9m 2.5m 3.2m Illuminance (fc) Illuminance (lux) 7,815 3, Beam Angle Field Angle Source Four T HID Zoom W set at Mid (cosine) Degree Field Beam Efficiency per watt Mid 72,600 6,020 4, % Metric Conversions: For Meters multiply feet by.3048 For Lux multiply footcandles by For Field diameter at any distance, multiply distance by For Beam diameter at any distance, multiply distance by Throw Distance (d) 3.0m 4.6m 6.1m 7.6 Field Diameter 1.8m 2.8m 3.7m 4.6m Illuminance (fc) Illuminance (lux) 3,703 1, Beam Angle Field Angle Source Four T HID Zoom W set at Widest (cosine) Degree Field Beam Efficiency per watt Widest 34,400 5,650 4, % 37.7 Metric Conversions: For Meters multiply feet by.3048 For Lux multiply footcandles by For Field diameter at any distance, multiply distance by For Beam diameter at any distance, multiply distance by of 6

4 Source Four T HID Zoom W PHOTOMETRICS Source Four T HID Zoom W set at Narrowest (cosine) Iso-Illuminance Diagram (Flat Surface Distribution) Cosine Plot % % Degrees Source Four T HID Zoom W set at Mid (cosine) Iso-Illuminance Diagram (Flat Surface Distribution) Cosine Plot % % Degrees Source Four T HID Zoom W set at Widest (cosine) Iso-Illuminance Diagram (Flat Surface Distribution) 10% 50% Cosine Plot Complete IES photometry data files (LM format) may be downloaded from the ETC website. Go to 4 of 6 Degrees

5 Source Four T HID Zoom W MOUNTING OPTIONS MOUNTING OPTIONS 7065A1006 Standard oke, provides +12 to -7 tilt from horizontal when ground-mounted. Cannot be aimed straight up or down (Supplied with fixture) 7065A1010 Wall or Square Pole Mount 159mm 81mm 514mm 208mm 229mm 274mm 330mm 203mm 7065A1007 Long oke, provides +90 to -35 tilt, allowing straight up or down aiming 375mm 100mm ACCESSORIES 7065A A A A1013 Gobo Holder (B-size) for steel patterns Gobo Holder (B-size) for glass patterns and colour Grid Louvre Insert Kit, (egg-crate) insert for use with 7065A1014 and 7065A1013 External colour holder, holder for glass or gel colour for external mounting on fixture housing 7065A1008 Single Pole Mount Pole-top mounting adapter for 4 (100mm) pole (provided by others) 198mm 178mm 206mm 260mm 184mm 104mm 108mm (Inside) 7065A1014 Half Shield, 45 for external mounting on fixture housing 7065A1009 Twin fixture Pole top mount adapter for standard 4 (100mm) pole (provided by others) 202mm 127 mm 104mm 635mm 108mm (Inside) 5 of 6

6 Source Four T HID Zoom W PHSICAL Source Four T HID Zoom W Weights * MODEL WEIGHT SHIPPING WEIGHT Kg Kg S4 HID T 150W mm 333mm Front View 261mm 211mm 331mm Side View 261mm 282mm 261mm 9.5mm 191mm 127mm 63.5mm 331mm Bottom View AVAILABLE FROM Rear View Source Four T products are protected by one or more of the following patents: U.S. Licensed under U.S. Patent No. 5,404,283. U.S. Patents Pending Corporate Headquarters 3031 Pleasant View Rd, PO Box , Middleton WI USA Tel Fax London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0) Fax +44 (0) Rome, IT Via Pieve Torina, 48, 11, Rome, Italy Tel +39 (06) Fax +44 (0) Holzkirchen, DE Ohmstrasse 3, Holzkirchen, Germany Tel +49 (80 24) Fax +49 (80 24) Hong Kong Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung uet Road, Kowloon Bay, Kowloon, Hong Kong Tel Fax Web Copyright 2011 ETC. All Rights Reserved. All product information and specifications subject to change. 7060L1059-GB Rev. C 9/11 6 of 6