Specification Primewood Disclaimer JASNO reserves the right to change the contents of this document without notice.
2
Content 1. Material... 6 2. Components... 7 Louver Options... 7 Stile Options... 7 Stile options and center stile... 8 Rail... 8 R Frame... 10 Hang Strip Options... 12 T-Post... 14 Tilt Rod... 15 Louverpins... 15 3. Color Options Primewood... 16 4. Order Size Definition... 17 5. Dimensions and gaps... 19 6. Matching... 21 7. Hardware... 22 Hidden Hinge... 22 Buttoncatch and lock for connecting panels... 23 Window handle flat 15mm... 24 8. Cut out in hang strips... 25 9. Bi-fold track system... 26 General... 26 Bi-foldtrack system 90... 28 Panel configurations for bi-fold track system 90... 31 Bi-fold track 180... 32 Panel configurations for bi-fold track system 180... 33 Specification Primewood 2018 version 1 3
10. By-Pass System: Louvers closed position... 34 General... 34 Mounting type... 35 11. Open Bypass system: Louvers opened position... 37 General... 37 Mounting type... 39 12. Shutters with raised panels... 41 13. Shutters with fixed louvers... 42 14. Special Shape Shutters... 43 Possible shapes... 43 Offset tiltrod... 43 French doors... 44 15. Shutters for roof window... 45 16. Gloss Level... 46 17. Frame/Track splice... 46 18. Manufacture time... 46 19. Package... 46 20. Extra louvers... 46 4
Important remarks for Ecowood Ecowood Ecowood Plus Aqualine Primewood Max. panel width 1 folding panel: Lamel 47mm 600 600 610 762 Lamel 63mm 750 914 787 914 Lamel 89mm 750 914 914 1066 Lamel 114mm - - 914 1066 Max. panel width 2 folding panels: Lamel 47mm 600 600 610 660 (762 with track) Lamel 63mm 600 600 610 660 (914 with track) Lamel 89mm 600 600 610 660 (914 with track) Lamel 114mm - - 610 660 (914 with track) Different options: Moisture resistant Splash proof Roof window R frame 18 Paint colors 18 Stain colors Sloped windows Arch and round windows Double hang Silent View Raised panel Specification Primewood 2018 version 1 5
1. Material JASNO shutters are made of White Teak. This is a firm, but light wood species with a subtle wood grain. The color of the wood is mat-silver with a silky look. White Teak is an exotic wood species, family of the well known Teak. JASNO uses White Teak derived from the Solomon Islands, where the forest is managed responsibly and sustainably. (FSC certified since 1998). The monitored drying process for the timber guarantees a long useful life for the shutter. The frames are connected via a classical mortise-and-tenon joint, maximising the glued surface for maximum rigidity. The engineered stile has multiple layers inside, made of hardwood; this imparts excellent durability to the core of the stiles and prevents it from warping. The louvers from JASNO shutters are quarter-sawn making it possible to supply panel widths of up to 1066mm, without any risk of twisting or distortion. The costly methods do however mean that JASNO shutters represent a durable investment in your home. 6
2. Components Louver Options 47.7 63.5 88.9 114.3 12 12 10 8.5 Stile Options 25.4mm 25.4mm 41.3mm 25.4mm 25.4mm 41.3mm 41mm Butt Stile 41mm Astragal Stile 50.8mm 50.8mm 50mm Butt Stile 50mm Astragal Stile If the panel width exceeds 550mm the 50mm stile will be applied. Specification Primewood 2018 version 1 7
Stile options and center stile 25.4mm 25.4mm 57.15mm Center stile / 57mm Butt stile 57.15mm 57mm Astragal stile The stile has multiple layers inside, which is made of hardwood, and this imparts an intense level of durability to the cores of our stiles and results in a long term stability and durability robust support system for your shutter panels. The default position for astragal stile is right over left. (Astragal stile on the right, and butt stile on the left). The center stile is used for NON hinged panels with a maximum width of 1270mm, exactly in the middle of the panel. From 914mm (with a louver size of 63mm), 1066mm (with a louver size of 89mm and 114mm) and 762mm (louver size 47mm) the center stile is obliged. Rail Top/Bottom Rail Divider Rail (76.2mm) 21mm 7.9mm 21mm 7.9mm 70mm to 165mm 76.2mm Panel height Min. height top / bottom rail < 508mm 70mm < 1143mm 76mm < 1625mm 86mm < 1980mm 92mm < 3378mm 111mm 8
Divider Rail 2 Divider Rail 1 76.2 76.2 The divider rail splits up a panel in 2 or 3 sections. The sections function separately from each other. When the panel height exceeds 1980mm 1 Divider rail is obliged, if the height from top or bottom of panel to the center of the divider rail exceeds 1980mm a 2 nd divider rail is obliged. Due to the fact that top and bottom rails are equal in height (default) the final position can vary from the ordered position: Louver size 47mm 63mm 89mm 114mm Tolerance 19mm 25mm 38mm 51mm When the position of the divider rail must be at exact height as ordered, please use the special remark DR at exact height. Specification Primewood 2018 version 1 9
R Frame 22.2mm 12mm 63mm 75mm 14mm 37.8mm 20mm 5mm 1mm 60mm R frame can be ordered in 2-sided (left and right), 3-sided (left, top and right), and 4-sided (top & bottom, left & right). 5mm 5mm 2.5mm 2.5mm 2.5mm 5mm 2.5mm 5mm 5mm 10
When order 2-sided frames, the frames will be the same length as the panels. When order 3-sided frame (L&R&Top) the panels will be 5mm shorter at the bottom (see drawing). In special shapes the R frame can be of use to cover imperfect parts of the window. Fixed louvers Order Height 2 Order Height 1 Order Width The dashed line is the inside of the R frame. Specification Primewood 2018 version 1 11
Hang Strip Options Hang strip can be ordered in 2-sided (left and right), 3-sided (left, top and right), and 4-sided (top & bottom, left & right). 2.5mm 2.5mm 2.5mm 2.5mm 5mm 5mm Available Hang Strips: 25mm x 40mm, 25mm x 50mm, 25mm x 60mm and 25mm x 75mm. 50mm x 40mm, 50mm x 50mm, 50mm x 60mm and 50mm x 75mm. 75 60 50 40 47.6 63.5 88.9 114.3 3 5 2 5 25 50 12
Pre-drill mounting holes: Front Side 25 / 50mm Ø5 25 / 50mm 75 60 50 40 75 60 50 40 Ø5 Ø14 1 Ø14 1 The predrilled holes can be covered with a flat cap (order separately!). With the touch up paint these caps can be made in the same color during installation. As option the pre-drill mounting holes can be ordered with a wooden plug in the same color: Front Side 25 / 50mm 5 50 60 50 40 60 50 40 20 75 75 9 Note With inside mount only the 50mm wide hang strip is available (so no R-Frame and 25mm wide hang strip) Pre-drill hole: the top & bottom pre-drill hole will be at 80mm from top & bottom. 80 80 Specification Primewood 2018 version 1 13
T-Post T-Posts divide a window vertically into sections. T-Posts can be used to match the design of a window that has a natural break, a mullion, to accommodate panel configurations that require more than two panels, or just for aesthetic purposes. 50mm x 40mm, 50mm x 50mm, 50mm x 60mm and 50mm x 75mm: 75mm 60mm 50mm 40mm Paneel Paneel 50mm For T-post, no pre-drilled hole is as default. If you want to pre-drill T-post (always at front), please specify it on the order form. T-post pre-drill hole position will follow the Hang Strip pre-drill hole position. Position of the T-post Measure from left to the center of the T-post, also the 2 nd T-post is measured from the far left, see the drawing below: 50mm 50mm T -post 1 5mm 5mm T -post 2 order width Example configuration: LTLRTL 14
Tilt Rod Regular tilt rod Default is placed at the center. 15.4 13 Concealed gear system (Silent View) Available for 63mm, 89mm and 114mm louvers. The gear system is concealed in the stile and covered with a wooden cover strip in the same color as the shutter. Important The concealed gear system will be split into half if the panel height is over appr. 1370mm without divider rail, or if the panel section exceeds this limit from center of divider rail to top/bottom of panel. Louverpins In order to make it possible that the louver stay in the wished position, the louver pins have resistance. In each panel there is also a screw to adjust the resistance of the louvers. Specification Primewood 2018 version 1 15
3. Color Options Primewood Paint Varnish 001 Pure White 108 Rustic Grey 002 Extra White 109 Weathered Teak 003 Silk White 110 Limed White 004 Bright White 114 Taupe 006 Pearl 115 Java Teak 008 Marshmallow 200 Natural 009 Creamy 204 Oak Mantel 011 Cameo 205 Goldenrod 013 Bisque 212 Dark Teak 019 String 215 Cordovan 023 White Dove 219 Mahogany 027 White Birch 220 New Ebony 037 Pointed White 221 Black Walnut 048 Chai 227 Red Oak 049 Stone Grey 230 Old Teak 051 Brown Grey 237 Wenge 053 Clay 246 Matte Black 836 Classic Black 862 French Oak Custom colors in RAL (K5) or original NCS (2nd edition) and F&B colors (this is not F&B paint) are available with a surcharge. Hygienilac is available in both paint and stain colors and kills most species of bacteria. Hygienilac is mixed through the last paint layer. Due to the nature of material manufacturing, colors may vary slightly between dye lots. Please order shutters for the same home at one time. Slight variations may also occur between the finished products and the color decks. 16
4. Order Size Definition Please provide Max Frame to Frame Width for order width, and Max Frame to Frame Height for order height. INSIDE MOUNT Hangstrip Hangstrip 5mm gap in factory ORDER W IDTH Hangstrip T ake 3-4mm gap! ORDER W IDTH ORDER W IDTH Take 2mm gap! Take 2mm gap! 5mm gap in factory R Frame OUTSIDE MOUNT Take sufficient overlap (at least 10mm) 5mm gap in factory Hangstrip (advise is to take 50mm wide hangstrip) ORDER W IDTH Specification Primewood 2018 version 1 17
Different panel sizes in one window are possible. Please indicate this in special notes. Hangstrip + LL RR + Hangstrip 5mm ORDER WIDTH Order height for hang strip or R frame: Inside mount Inside mount with R frame at top & bottom Inside mount with R frame at top Outside mount Take 5-7mm gap! Take 5-7mm gap! ORDER HEIGHT Take 2mm gap! Take 2mm gap! ORDER HEIGHT Take 2mm gap! Take 2mm gap! ORDER HEIGHT ORDER HEIGHT If R frame is also ordered for the top (L&R&Top), the panels will be 5mm shorter at bottom. For order height and width when ordering track systems: Please go to the chapters Bypass or Bifold track systems. 18
5. Dimensions and gaps Panelwidth in mm Panelheight in mm Louver Panel only 1 hinged panel OR in bypass track in bifold track 2 hinged panels free 2 hinged panels with bottom support 3 hinged panels with bottom support NO dividerrail 1 and/or 2* dividerrail Min. Max. Max. Max. Max. Max. Max. Min. Max. Max. 47mm 152 1270 (+ center stile) 762 762 600 660 430 254 1980 3378 63mm 152 1270 (+ center stile) 914 914 600 660 430 254 1980 3378 89mm 152 1270 (+ center stile) 1066 914 600 660 430 254 1980 3378 114mm 152 1270 (+ center stile) 1066 914 600 660 430 254 1980 3378 Various panel sizes in one window are possible. Please indicate this in special notes. The center stile (width = 57mm) is an extra vertical stile in the middle of a wide panel. From a width of 2450mm a bi-fold track system is advised, from 2690mm width (2740mm if the Hang Strip width = 50mm) it is obliged. Without bi-fold track system the maximum of hinged panels is 3 at one side with a single panel width of maximum 430mm (so LLL or RRR) * When the panel height exceeds 1980mm 1 Divider rail is obliged, if the height from top or bottom of panel to the center of the divider rail exceeds 1980mm a 2 nd divider rail is obliged. Specification Primewood 2018 version 1 19
Gap between panels / panel and Hang Strip (where there are hinges) Gap between panels / panel and Hang Strip (no hinges) Gap between panel and frame on top and bottom For Bi-fold system, gap between panel and side frame/to the end of header when no side frame required. For By-pass system, gap between panel and side frames For By-pass system, gap to end of header/track for each side when no side frames required 1,5mm 5mm 2,5mm 6,5mm 3mm 3mm 20
6. Matching When there are windows/doors with different heights close to each other, please make a remark on the order form, so divider rail can be lined with top/bottom rail. The TOP of the divider rail will be brought in line with the top of bottom rail. The height of divider rail (76mm) will never be the same as the height of the bottom rail. For this type of window/door, please indicate align item 1 and item 2 at top, and bring divider rail of item 1 in line with bottom rail of item 2. 76,2 Item 1 Item 2? For this type of window/door, please indicate item 2 is x mm lower than item 1, bring divider rail of item 1 in line with bottom rail of item 2. 76,2 Item 1 Item 2 Specification Primewood 2018 version 1 21
7. Hardware Hidden Hinge Fixation screw Lock screw Default Color: Optional color: Nickel Plated Brass The hidden hinge give the shutters a modern and clean look. It also makes sure the construction is stronger in comparison with a contemporarily hinge. Note: When there has to be a cutout in hang strip, note that hinge may be in the way! Top view 16mm 3mm Height of Stile / Hang Strip 50mm 50mm 260mm Stile 100-450mm 17mm 22
Buttoncatch and lock for connecting panels Installing button catches makes the end result even better. Also loose panels can be mounted vertically with button catches. Attention Loose panels which are mounted at an angle likewise (like roof windows) always need additional fixation in order to prevent the panels falling down! Material: Brass or Nickel plated The lock for connecting panels improves the usage of shutters and it gives a beatiful look. Material: Brass or Nickel plated Specification Primewood 2018 version 1 23
Window handle flat 15mm 28 50 63.5 15 25 51 10 28 50 63.5 5.6 15 80 25 Always support the panels at the bottom or install with button catches. 24
8. Cut out in hang strips It is possible to order a cutout at the back of a hang strip or R frame (top and/or bottom) The cutout cannot be deeper than the panel thickness of 26mm: Depth 26mm panel tickness Height panel tickness Height 26mm Depth It is also possible to order a cutout at the side of the hang strip or R frame (top and/or bottom) In most cases the hinge at top / bottom will be cancelled: L R L R Height Height Width Width Width Width Height Height Minimum 10mm Specification Primewood 2018 version 1 25
9. Bi-fold track system General Components 27.4mm Aluminum top track aluminum color 25mm 31.2mm 8.8mm Default: Aluminum floor track type M in aluminum color, with predrilled holes. 8.8mm 19mm 13mm Option without surcharge: Aluminum floor track type U in aluminum color, with predrilled holes. Floor track type M will be provided with end cap. 26
Floor track type U is developed to place IN the floor: 11mm Advised cut in the floor is 13,5mm width x 8mm depth. 10.4 41 20.6 Spring loaded guide Wheel carrier The tiltrod is not exactly in the center of the panel when ordering more than 2 hinged panels (offset = 7mm) or in case of floating bi-fold system (FF/FF), in order to make the total width of the package as small as possible. Topview 7mm 7mm 7mm 7mm 7mm 7mm 7mm 7mm L L L L R R R R Specification Primewood 2018 version 1 27
Bi-foldtrack system 90 Outside Mount 44mm 28mm 28mm 44mm 15mm 20mm 20mm 12mm Order width 12mm 9mm 76mm 9mm 89mm 38mm Order height 3mm 47mm 9mm 38mm 76mm 3mm 47mm 9mm 38mm 38mm 76mm 47mm 63mm 39mm 31mm Order height 47mm 63mm 51mm 43mm 89mm 18mm 89mm 31mm 19mm 114mm 5mm 19mm 114mm 18mm Bi-fold 90 + frame 76mm Bi-fold 90 + frame 89mm Installation tip: If possible, mount the upper frame to the ceiling, for more strength and ease of installation. 28
Inside mount 19mm 5mm 15mm 5mm 44mm 1.5mm Order width 1.5mm 44mm 9mm 76mm 9mm 76mm 49mm 3mm 9mm 38mm 3mm 9mm 38mm 47mm 47mm 2mm Order height 2mm 47mm 63mm 39mm 31mm Order height 47mm 63mm 39mm 31mm 89mm 18mm 89mm 18mm 19mm 114mm 5mm 19mm 114mm 5mm Bi-fold 90 + frame 76mm Bi-fold 90 + frame 76mm Specification Primewood 2018 version 1 29
Inside mount without frame at top Can also be used for door opening: order in that case an extra wooden batten 25mm x 9mm x [order width]mm. 19mm 5mm 15mm 5mm 44mm 1.5mm Order width 1.5mm 44mm 9mm Order height 25mm 3mm 2mm 47mm 63mm 89mm 11mm 18mm 31mm 19mm 114mm 44mm Bi-fold 90 without frame 30
Panel configurations for bi-fold track system 90 Possible panel configurations include: LL, RR, LLRR, LLL, RRR, LLLRRR, LLLL, RRRR, LLRRRR, LLLLRR and LLLLRRRR. In addition, the floating bi-fold system can be provided. Difference is that there is no top/bottom pivot, instead of that are wheels in top track and spring loaded guide in floor track. This makes it possible to fold and slide free in 1 track. Writes F for floating panel, use a dash when the panels need to be split. The tilt rod will be offset 7mm to the right from center of panels if multi fold. The gap is 3mm where there are two panels meet without hinges. Specification Primewood 2018 version 1 31
Bi-fold track 180 Important note: 41mm stile is not available for this system. Outside mount (only option!) 44mm 28mm 28mm 44mm 15mm 20mm 20mm 12mm Order width 12mm 9mm 76mm 9mm 89mm 3mm 47mm 9mm Order height 38mm 38mm 76mm 3mm 47mm 9mm 38mm 38mm 76mm 47mm 63mm 39mm 31mm Order height 47mm 63mm 51mm 43mm 89mm 18mm 89mm 31mm 19mm 114mm 5mm 19mm 114mm 18mm Bi-fold 180 + frame 76mm Bi-fold 180 + frame 89mm Installation tip: If possible, mount the upper frame to the ceiling, for more strength and ease of installation. 32
Panel configurations for bi-fold track system 180 Possible panel configurations: LL, RR, LLRR, LLL, RRR, LLLRRR,LLRRR, LLLRR. Other configurations are not available. Floating panels (FF) are not available for this system. Example of LLLRRR Specification Primewood 2018 version 1 33
10. By-Pass System: Louvers closed position General The louvers have to be in closed position if sliding the doors in the track. Top view 2 panels with 1 overlap Overlap 4 panels with 2 overlaps Overlap Overlap 4 panels with 1 overlap Overlap Overlap: 31mm for 41mm stile, 40mm for 50mm stile. (Overlap = Stile width 10mm) 34
The final panel width will be determined by the number of panels and its overlaps. Important note if the panel width exceeds 450mm it is strongly advised to use the floor track system (see chapter bi-fold track system). Thus the panels are locked completely, which prevents the panels touching each other. Also the panels will be straight relative to each other (2 floor tracks will be installed over the entire width). Mounting type Outside Mount (fascia returns included) 20mm 38mm 150mm Order width 140mm 102mm 19 51 70 38mm 39mm 114mm 19mm 28 Order height 47mm 63mm 46mm 38mm 89mm 25mm 35mm 114mm 13mm 13mm Specification Primewood 2018 version 1 35
Inside mount 38 114mm 63mm 126 1.5mm Order width 1.5mm 19 51 44 38mm 19mm 28mm Order height 47mm 63mm 89mm 21mm 13mm 0mm 35mm 114mm 13mm 13mm 36
11. Open Bypass system: Louvers opened position General The louvers can be in open position if sliding the doors in the track. Boxout size and light block size will be different for 63mm louver and 89mm louver (Only available in 63mm and 89mm louver). Top view Light blocks will be installed in order to prevent to much light coming in. For this reason it is important to know up front in what position the panels have to be installed: 63mm Silent View Silent View 30mm 19mm 63mm 28 40mm 50mm 89mm 28 19mm 30mm 89mm 19mm 30mm Specification Primewood 2018 version 1 37
Example BFFB: from left to right it means 1 panel in the back, 2 panels in the front and 1 panel in the back track: Important note If the panel width exceeds 450mm it is strongly advised to use the floor track system (see chapter bi-fold track system). Thus the panels are locked completely, which prevents the panels touching each other. Also the panels will be straight relative to each other (2 floor tracks will be installed over the entire width). 38
Mounting type Outside Mount (fascia returns included) 20mm 38mm 160mm 200mm Order height 102mm 19mm 25mm 19 63mm 28mm X 63mm Z 6mm 38 19mm 170mm Order width 20mm 38mm 38mm 114mm 210mm Order width Order height 102mm 19mm 25mm 19 89mm 28mm K 89mm L 6mm 38 22mm 38mm 114mm Center tilt rod Silent view K 114mm 92mm L 67mm 89mm X 90mm 70mm Z 51mm 71mm Specification Primewood 2018 version 1 39
Inside Mount (fascia returns included) 1.5mm 1.5mm 38mm 160mm 200mm Order height 19mm 25mm 19 63mm 28mm 170mm Order width 1.5mm 1.6mm 38mm 210mm Order width 63mm X 63mm Z 6mm 38 2mm 19mm Order height 63mm 19mm 25mm 19 89mm 28mm K 89mm L 6mm 38 2mm Center tilt rod Silent view K 114mm 92mm L 67mm 89mm X 90mm 70mm Z 51mm 71mm 40
12. Shutters with raised panels Front and top view of a raised panel (closed panel) with the minimum and maximum dimensions: Possible combinations with raised panels: 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 76.2 MIN 305mm 76.2 MAX 1220mm 12mm Specification Primewood 2018 version 1 41
13. Shutters with fixed louvers Closed Open Direction Dress Down Dress Up 47mm louver 63mm louver 89mm louver 114mm louver Back of panel Back of panel The louvers will be fixed with an extra louver pin between the louver and stile. There will be no tilt rod (is technically not possible). 42
14. Special Shape Shutters Possible shapes Regarding the special shaped shutters there are numerous options, we show just the most common ones: The best way to order special shapes is to make a drawing with the dimensions. If ordered a technical drawing will be provided to make an extra check. Offset tiltrod In some cases an offset tilt rod will be used for special shapes. Specification Primewood 2018 version 1 43
French doors If a door handle is in the way, a French door cutout is a good solutions: 44
15. Shutters for roof window (see separate price list) For the most common roof windows as Velux and Fakro a roof window shutter can be ordered. This shutter is provided with special frame around the 4 sides which fits in perfect in the roof window. In the online order system most of the types can be ordered without taking measurements. Roof window catch Chamfer Z frame roof window 22mm 98 12 37mm 24mm The available louver sizes are 47mm, 63mm en 89mm (114mm is not available). The roof window is available with Silent View and/or special colors. Specification Primewood 2018 version 1 45
16. Gloss Level The shutters will be painted with a satin finish. 17. Frame/Track splice For frame, track (top/bottom) or plain fascia, if the length exceeds 3600mm, they will be split in two pieces. 18. Manufacture time After confirmation of the order, the shutters will be directly put into manufacturing. Adjustments after confirmation cannot be made without extra costs. Delivery time will given after confirmation of the order. 19. Package The Maximum weight per Box is 40kg. When the R-frame or hang strip deeper than 60mm has been ordered, the panels and frames / hang strips will not be pre-installed. This also applies if 3 or 4 sided frames / hang strips have been ordered. 20. Extra louvers 2 extra louvers will be supplied for each shutter. For the shutters with different panel width, will supply 2 extra louvers for each width. 46