www.sal.net.au Device Manage devices, individual control Scene Create preset lighting scenes Group Simultaneous control by groups Timer Countdown turn-off timer Schedule Schedule your lights 24 Sync PIXIE RGB strip flash to music beat 302
SMART IGHTING NE PRODUCTS p304 SDD350BT P305 S350BT P306 FP12V/SBT FEXI SMART P307 FP12V/RGBBT FEXI SMART 303
SMART DIMMER SDD350BT FEATURES: HEN USED INDEPENDENTY Push on/off Hold to dim up or down Memory function Settable minimum dim level FEATURES: HEN USED IN CONJUNCTION ITH THE PIXIE APP TIMER FUNCTION: set dimmers or dimmer groups to remain on for set time period SCHEDUE FUNCTION: set dimmers or dimmer groups to turn off, turn on at set times and days of the week. Required brightness levels can also be selected GROUP FUNCTION: group dimmers together into dimmer groups SCENE FUNCTION: set up a range of dimming level scenarios (scenes) by individual dimmers, or dimmer groups SPECIFICATION Fit most branded switch plates. 1, 2 or 3 gang Overheating, overload and full short circuit protection SMART ED indicator Trailing edge phase cutting dimming Complies to AS/NZS 60669.2.1 Retentive terminal screws and loop terminal IRING DIAGRAM H1 H2 OOP TYPICA IREESS RANGE 15 m dependant on installation environment OAD A Netural Active oad Model No. Input Frequency Max. oad Min. oad Dimensions x H1 x H2 x Operating temp. SDD350BT 220V - 240V 50Hz/60Hz 350 2* 40 x 34 x 45 x 22.5 mm -20~40ºC *Dimming performance will be affected when the load is less than 2. (At 25 C) 304 www.sal.net.au
SMART SITCH S350BT FEATURES: HEN USED INDEPENDENTY Push on/off FEATURES: HEN USED IN CONJUNCTION ITH THE PIXIE APP TIMER FUNCTION: set switches or switch groups to remain on for set time SCHEDUE FUNCTION: set switches or switch groups to turn on and off at required times and days of the week GROUP FUNCTION: group switches together into switch groups SCENE FUNCTION: set up a range of scenarios (scenes) by individual switches or switch groups SPECIFICATION Fit most branded switch plates. 1, 2 or 3 gang Overheating, overload and full short circuit protection SMART ED indicator Complies to AS/NZS 60669.2.1 Retentive terminal screws and loop terminal H1 H2 TYPICA IREESS RANGE 15 m dependant on installation environment IRING DIAGRAM OOP OAD A Netural Active oad Model No. Input Frequency Max. oad Min. oad Dimensions x H1 x H2 x Operating temp. S350BT 220V - 240V 50Hz/60Hz 350 13 40 x 34 x 45 x 22.5 mm -20~40ºC www.sal.net.au 305
SMART ED STRIP KIT FP12V/SBT FEXI SMART FEATURES Dimmable controlled by included remote, or PIXIE app Dimming memory function High performance, stable, even light output Pre wired for easy installation, plug-in & ready to use Cuttable every 50mm 2M and 5M packs NOTE: Heatsink required ADDITIONA FUNCTIONS HEN USED ITH PIXIE APP: TIMER FUNCTION: Set strips or strip groups to remain on for set period and set a countdown timer (1 min. to 24 hours) until strips or strip groups turn off SCHEDUE FUNCTION: Set strips or strip groups specific time to turn on and off. Required brightness levels can also be selected GROUP FUNTION: Group strips together into strip groups and control as one SCENE FUNCTION: Set a range of scenarios (scenes) by individual strips or strip groups and activate with one touch CONSTRUCTION Kit includes weatherproof strip, driver with flex and plug, controller and remote control High performance SMD ED chips Self-adhesive backing IP RATING IP44 (strip only) ED CHANNE OPTIONS ST1000, ST3000, ST3010, ST3020, ST3030, ST3040, ST3050, ST4050, ST5000 50 mm H Model No. Input Power umen CCT Beam Angle Cuttable ength Dimensions x x H ED Qty. FP12V2M/ND/SBT 240V 6/m 350lm/m 5000K 115º 50 mm 2000 x 8 x 2.5 mm 60ea/m FP12V2M//SBT 240V 6/m 350lm/m 3000K 115º 50 mm 2000 x 8 x 2.5 mm 60ea/m FP12V5M/ND/SBT 240V 6/m 350lm/m 5000K 115º 50 mm 5000 x 8 x 2.5 mm 60ea/m FP12V5M//SBT 240V 6/m 350lm/m 3000K 115º 50 mm 5000 x 8 x 2.5 mm 60ea/m 306 www.sal.net.au
SMART ED STRIP KIT FP12V/RGBBT FEXI SMART FEATURES Colour and brightness controlled by included remote, or PIXIE app Four different flashing modes Dimming memory function High performance, stable, even light output Pre wired for easy installation, plug-in & ready to use Cuttable every 100mm 2M and 5M packs NOTE: Heatsink required ADDITIONA FUNCTIONS HEN USED ITH PIXIE APP: SYNC FUNCTION: The synchronisation function matches the light transitions to the rhythm of the music TIMER FUNCTION: Set strips or strip groups to remain on for set period and set a countdown timer (1 min. to 24 hours) until strips or strip groups turn off SCHEDUE FUNCTION: Set strips or strip groups specific time to turn on and off. Required brightness levels can also be selected GROUP FUNTION: Group strips together into strip groups and control as one SCENE FUNCTION: Set a range of scenarios (scenes) by individual strips or strip groups and activate with one touch CONSTRUCTION Kit includes weatherproof strip, driver with flex and plug, RGB controller and RGB remote control High performance SMD ED chips Self-adhesive backing IP RATING IP44 (strip only) ED CHANNE OPTIONS ST1000, ST3000, ST3010, ST3020, ST3030, ST3040, ST3050, ST4050, ST5000 100 mm H Model No. Input Power Colour Beam Angle Cuttable ength Dimensions x x H ED Qty. FP12V2M/RGBBT 240V 5.4/m RGB 115º 100 mm 2000 x 10 x 3 mm 30ea/m FP12V5M/RGBBT 240V 5.4/m RGB 115º 100 mm 5000 x 10 x 3 mm 30ea/m www.sal.net.au 307