DC12V SMD IR InfraRed (850nm/940nm) Tri-Chip Flexible LED Strips 60LEDs 14.4W Per Meter

Transcription

1 Item Code LED Type LED QTY. Wattage (max) Cuttable Length available Size(W*H/mm) Weight Input Voltage Light Color PCB color option PCB Backing DC12V SMD IR InfraRed (850nm/940nm) Tri-Chip Flexible LED Strips 60LEDs 14.4W Per Meter HK-F5050IR30-X Infrared 850nm or 940nm SMD LED/Meter 14.4Watt/Meter Every 3LED per 2'' (5cm) can be cut Lengths within 5meters(16.4feet) and multiple of 2''(5cm) 10*2 (for non-waterproof) 0.15kgs/roll for non-waterproof; 0.25kgs/roll for IP65/IP67; 0.5kgs/roll for IP68. 12V DC Beam Angle 120 Waterproof Type Dimming Lead Pre-wiring Packing Infrared 850nm or 940nm (invisible for bared eye) Yellow, White, Black Adhesive backing for Non-waterproof and waterproof IP65,extra rubber mounting clips provide for IP67 and IP68 Non-waterproof(indoor use), Waterproof IP65, IP67, IP68 PWM dimmable (more information please refer to different Dimmer applications) Single color strip has two contacts(v+,v-) and is Polarity Sensitive. 20cm(8'') Red-Black lead wire is pre-soldered at one end of the strip 5meters(16.4feet) per roll packed in a static bag Note 1: When the strip make into a long string, a full roll we say, for there is voltage drop, so there final power consumption will be lower than the rated max data. Also the lumen output of a long string will be lower than the rated data per meter. There is an around 15% derated than the max. The shorter the strip, the output data will be closer to the rated. Drawing per 5000mm (1inch=25.4mm) Colors The 5050 Infrared LED is invisible light.

2 Product Photo Product Application and Features LEDLIGHTSWORLD infrared 850nm/940nm LED strip.this popular LED strip light has 60 vbright LED trichip 5050 LED per meter. Available in 50cm, 100cm, 200cm, 300cm, 400cm and 500cm lengths with yellow, black, or white finish options. Special lengths requirement can be customized. Non-weatherproof, Waterproof IP65/IP67 and IP68 flexible light strips with adhesive backing, can be cut into 3-LED segments(2inch long). 12VDC operation. Dimmable with compatible LED dimmers. Applications Features *For surveillance or security *For the multitouch display *For Night Version Light Safty Tips *Can be cut into 3-LED segments *Adhesive backing *12VDC Operation *Dimmable - See our Dimmer Selection *Always disconnect power supply before cutting/connecting LED Light Strips. *Do not crimp strip tape, attempt to bend strips width-wise, or length-wise to a radius less than 15mm *Do not connect LED Light Strips directly to 120V AC power. *Apply power to test LED Light Strips before mounting.

3 Strip PCB color (the photo only tell the difference on PCB color) Waterproof Protection (the photo only tell the difference on Protection Grade) Non-Waterproof 2mm LED IP65 3mm Silicone Gel LED IP67 Silicone Tube LED 4mm IP68 Silicone Gel Silicone Tube 4mm 10mm 10mm 12mm 12mm *Non-waterproof : Bare Strip, with self-adhesive backing, for indoor or dry location use. *Waterproof IP65 : Strip Surface is covered on top with Gel, and with self-adhesive backing. IP65 grade can protect sprayed water from all direction. *Waterproof IP67: The bare strip is put in a hollow silicone tube and sealed at two ends. The strip comes without self-adhesive backing but with mounting clips. IP67 grade can shortly immersed in water. *Waterproof IP68: The bare strip is put in a U Shape silicone tube, then covered on top with silicon gel, and sealed at two ends, which make it's solid. The strip comes without self-adhesive backing but with mounting clips. IP68 grade can be used under water.

4 Alternative Options for Accessories (more details please contact us) Watt Input: VAC Output: 12VDC DC female Terminal DC female-male extension cable Length: mm long DC Female to male Available : 1 to 2 1 to 4 1 to 6 1 to 8 Terminal end Waterproof IP67 Power Lead Wire Length:1500mm Length:3000mm Watt Input: VAC Output: 12VDC Watt Input: VAC Output: 12VDC Dimmer or Amplifier Aluminum Options LED Light Strip power requirements are based on several factors, including the light strip layout and the length limitations of light strip-type lighting. And when choosing the transformer, we should have in mind that Transformer must be de-rated 20% to prevent overheating. And a big power transformer do no harm to the strip but good for safty. There are the following alternatives for the power supply: up to 1.0m: 12V/1.0A (12W) up to 2.0m: 12V/3.0A (36W) up to 3.0m: 12V/4.0A (48W) up to 4.0m: 12V/5.0A (60W) up to 5.0m: 12V/7.0A (84W) up to 10m: 12V/15A (180W) up to 20m: 12V/25A (300W) up to 40m: 12V/50A (600W, can use multi-source) up to 100m: 12V/125A (1500W, can use multi-source)

5 How to cut and mount the strip Double-sided adhesive tape attached at backing of the strip Double-sided Tape Attached and fixed directly Extra rubber mounting clips are provided for IP67 and IP68 strip (2pcs/meter) Mounting clip Fixed with screws by clips Cut the strip every 3LED for 12V version; 6LED for 24V version. Cut along marks on strip Look and Usage for the Mounting Clip (use screws to fix to object surface) Solderless Quick Connector to use after cut (Note:the 5050 strip need 10mm wide models) Snap down connectors with contact tongue for bared PCB, non-waterproof strips Snap down connectors with sharp teeth for IP65 waterproof strips Note: For IP67 and IP68 waterproof strip, there is no solderless connector.

6 Installation Planning Direct Powered by Transformer Run to AC Wall Outlet, On/Off controlled by a Wall Switch Wall Switch 120V/220VAC Outlet 12VDC power supply #1 Use ONE power supply to power several rolls of strip Power Supply Option #1 When big brightness difference between the beginning and the end of the strips string, you can change to power the strip from both ends, like add wires to connect the strips and power supply as below showed. Red Wire:positive; Black Wire:negative Option #2 When big brightness difference between the beginning and the end of the strips string, you can change to power the strips in parallel, as below showed. Red Wire:positive; Black Wire:negative #2 Use Several power supplies to power each roll of strip Red Wire:positive; Black Wire:negative

7 Light strip On/Off/Brightness is controlled by Dimmer (Wireless or Hardwire Type available) 120V/220VAC Outlet 12VDC power supply LED Dimmer R Remote Controller #1 Typical connection for one Dimmer to control one roll of the strip #2 One Dimmer to control several rolls of strips by adding Amplifier, and powered by one or several transformers. Note: The strips the Dimmer and Amplifer loaded with cannot exceed their rated max value. And in theory, you can add endless Amplifiers after the Dimmer.