SCHEDULE 40 FLUSH JOINT FITTINGS

130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53 106.14 2" 18.06 19.22 25.89 76.70 24.38 30.64 36.49 108.31 3" 30.16 46.31 77.41 144.93 37.74 58.95 98.91 181.59 4" 35.69 53.34 91.47 198.43 42.52 67.34 108.54 231.02 5" SDR 21 * 81.05 114.46 172.31 300.26 91.17 129.63 197.60 348.31 6" 89.83 129.44 199.70 361.32 99.94 147.14 243.95 428.34 8" 158.77 224.01 345.32 590.19 198.41 251.83 385.78 659.74 10" 224.13 301.52 479.97 829.28 255.74 339.45 536.87 924.11 12" 332.00 387.87 587.97 1,030.48 376.26 429.59 670.16 1,169.56 PIPE SIZE THREADED CAP THREADED PLUG RISER PIPE 2" Combo FJ Thd X Pop Riveted Point 5' Riser 5' Screen SCHEDULE 40 PVC FLUSH JOINT SCHEDULE 40 FLUSH JOINT FITTINGS Individual End Fittings THREADED POINT MOLDED PIN X POINT MOLDED BOX X POINT POP RIVETED POINT SCREEN 49.68 Attached to Screen POP RIVETED PLUG 1" 15.26 15.26 17.95 4.79 1 ¼" 25.26 25.26 27.81 5.09 1 ½" 23.65 23.65 26.19 5.15 2" 17.18 17.18 8.46 17.05 7.51 3" 20.60 20.60 15.96 11.71 4" 26.33 26.33 28.74 18.77 15.17 5" SDR 21 * 58.08 58.08 26.21 6" 63.24 63.24 31.11 8" 109.24 109.24 38.48 10" 166.66 166.66 66.94 12" 218.48 218.48 87.12 *This Flush Joint Thread is the ASTM F-480A88 thread for 5" Schedule 40 PVC and Big Foot Manufacturing is putting this thread on 5" SDR-21 PVC. The wall thickness of SDR-21 is approximately.044 less than the wall thickness of Schedule 40. 2" and 4" PIPE IS PROVIDED WITHOUT PRINT AND MEASURES SHOULDER TO SHOULDER. * ALL OTHER SIZES WILL HAVE PRINT ON THE PIPE AND WILL MEASURE OVERALL LENGTH SO WILL BE SHORT THE LENGTH OF THE PIN THREAD. SIZES THRU 18" AVAILABLE THRU QUOTATION *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

130 SCHEDULE 80 PVC FLUSH JOINT RISER PIPE SCREEN PIPE SIZE 2.5 5 10 20 2.5 5 10 20 1/2" 14.52 18.89 25.77 20.84 29.00 42.21 3/4" 15.75 21.35 31.96 56.31 22.07 31.46 48.39 87.92 1" ** 12.53 17.92 28.11 51.65 18.85 28.03 44.55 83.26 1-1/4" ** 14.99 22.90 37.46 69.00 21.31 33.01 53.88 100.61 1-1/2" 19.42 31.13 49.89 95.16 25.74 41.24 69.22 132.03 2" 21.46 31.63 52.78 100.42 27.78 41.74 70.75 135.47 4" 62.48 110.83 206.32 402.62 70.06 123.47 227.82 439.29 ** 1" and 1-1/4" Schedule 80 is White. Remaining Schedule 80 is Gray. SCHEDULE 80 FLUSH JOINT FITTINGS Individual End Fittings Attached to Screen PIPE SIZE THREADED CAP THREADED PLUG THREADED POINT POP RIVETED POINT POP RIVETED PLUG 1/2" 14.37 14.37 16.93 7.58 3/4" 14.37 14.37 16.93 4.97 1" 15.26 15.26 17.95 4.54 1-1/4" 23.65 23.65 26.19 5.99 1-1/2" 23.65 23.65 26.19 5.84 2" 21.44 21.44 7.60 4" 38.19 38.19 16.07 PLEASE NOTE: 1/2" - 1-1/2" WILL BE INDIVIDUALLY WRAPPED WITH "O" RINGS AVAILABLE ON REQUEST & SCH 80 * ALL OTHER SIZES WILL BE INDIVIDUALLY WRAPPED WITH "O" RINGS PROVIDED. SIZES THRU 18" AVAILABLE THRU QUOTATION *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

150 PVC COUPLINGS & SPIGOTS WGT/LBS CPLG44 4" BELL X 4" BELL LONG COUPLING 21.37 2.2 CPLG44TURN 4" BELL X 4" BELL COUPLING TURNED 28.88 2.2 CPLG454 4-1/2" X 4 BELL REDUCING COUPLING 21.37 2.6 CPLG4545 4-1/2" BELL X 4-1/2" BELL LONG COUPLING 21.37 2.8 CPLG54 5" BELL X 4" BELL REDUCING COUPLING 26.94 2.6 CPLG54SPG 5" BELL X 4" SPIGOT 21.37 2.6 CPLG54MT 5" BELL X 4" W/4" NPTTHD 26.78 2.6 CPLG54MTEXT 5" BELL X 4" W/4" NPTTHD EXTENDED 30.69 3.2 CPLG55 5" BELL X 5" BELL LONG COUPLING 27.09 3.4 CPLG55SDR17 5" BELL X 5" BELL LONG COUPLING FOR SDR17 32.42 4.4 CPLG55MT 5" BELL X 5" W/5"NPTTH 26.78 4.3 CPLG65 6" BELL X 5" BELL REDUCING COUPLING 27.09 3.8 CPLG65SPG 6" BELL X 5" SPIGOT 33.44 3.8 CPLG66 6" BELL X 6" BELL LONG COUPLING 32.75 4.8 CPLG6255MT 6-1/4" BELL X 5" W/ 5" NPTTHD 50.94 4.2 CPLG6256 6-1/4" BELL X 6" BELL REDUCING COUPLING 33.07 4.6 CPLG6256MT 6-1/4" BELL X 6" W/6" NPTTHD 37.03 4.6 CPLG625625 6-1/4" BELL X 6-1/4" BELL LONG COUPLING 49.08 6.4 OUR CUSTOM MADE COUPLINGS AND SPIGOTS MEET ASTM F-480 STANDARDS FOR TAPERED SOCKETS OR BELL END PIPE. THESE PRODUCTS COME IN MANY SHAPES AND SIZES TO MEET MANY NEEDS.

160 LIST PRICING PVC NIPPLES SCHEDULE 40 PART # DESCRIPTION WGT/LBS NIP241240SMT 3"X12" S40 NIPPLE NPT X PE $10.10 NIP241240MTMT 3"X12" S40 NIPPLE NPT X NPT $13.71 NIP241240MTPLG 3"X12" S40 NIPPLE NPT X PLUG $21.81 NIP241840SMT 3"X18" S40 NIPPLE NPT X PE $12.75 NIP241840MTMT 3"X18" S40 NIPPLE NPT X NPT $16.36 NIP241840MTPLG 3"X18" S40 NIPPLE NPT X PLUG $24.46 NIP242440SMT 3"X24" S40 NIPPLE NPT X PE $15.40 NIP242440MTMT 3"X24" S40 NIPPLE NPT X NPT $19.00 NIP242440MTPLG 3"X24" S40 NIPPLE NPT X PLUG $27.10 NIP321240SMT 4"X12" S40 NIPPLE NPT X PE $12.06 NIP321240MTMT 4"X12" S40 NIPPLE NPT X NPT $15.66 NIP321240MTPLG 4"X12" S40 NIPPLE NPT X PLUG $23.10 NIP321840SMT 4"X18" S40 NIPPLE NPT X PE $15.69 NIP321840MTMT 4"X18" S40 NIPPLE NPT X NPT $19.29 NIP321840MTPLG 4"X18" S40 NIPPLE NPT X PLUG $26.73 NIP322440SMT 4"X24" S40 NIPPLE NPT X PE $19.31 NIP322440MTMT 4"X24" S40 NIPPLE NPT X NPT $22.92 NIP322440MTPLG 4"X24" S40 NIPPLE NPT X PLUG $30.36 SCHEDULE 80 NIP241280SMT 3"X12" S80 NIPPLE NPT X PE $17.72 NIP241280MTMT 3"X12" S80 NIPPLE NPT X NPT $21.31 1.6 NIP241280MTPLG 3"X12" S80 NIPPLE NPT X PLUG $32.40 NIP241880SMT 3"X18" S80 NIPPLE NPT X PE $24.17 NIP241880MTMT 3"X18" S80 NIPPLE NPT X NPT $27.78 2.8 NIP241880MTPLG 3"X18" S80 NIPPLE NPT X PLUG $38.85 NIP242480SMT 3"X24" S80 NIPPLE NPT X PE $30.62 NIP242480MTMT 3"X24" S80 NIPPLE NPT X NPT $34.23 3.8 NIP242480MTPLG 3"X24" S80 NIPPLE NPT X PLUG $45.30 NIP321280SMT 4"X12" S80 NIPPLE NPT X PE $22.34 NIP321280MTMT 4"X12" S80 NIPPLE NPT X NPT $25.95 2.6 NIP321280MTPLG 4"X12" S80 NIPPLE NPT X PLUG $37.73 NIP321880SMT 4"X18" S80 NIPPLE NPT X PE $31.12 NIP321880MTMT 4"X18" S80 NIPPLE NPT X NPT $34.71 4 NIP321880MTPLG 4"X18" S80 NIPPLE NPT X PLUG $46.60 NIP322480SMT 4"X24" S80 NIPPLE NPT X PE $39.88 NIP322480MTMT 4"X24" S80 NIPPLE NPT X NPT $49.47 NIP322480MTPLG 4"X24" S80 NIPPLE NPT X PLUG $55.37

120 1-1/4" SCH 80 1-1/4" 1-1/2" 2" 3" 4" 5" SDR 21 6" 8" 10" 12" 3' 59.23 55.65 69.67 64.86 92.61 110.53 175.88 206.29 318.14 375.62 532.64 4' 70.21 65.42 82.13 78.38 112.55 136.59 210.82 248.62 379.89 449.56 641.61 5' 81.18 75.18 94.58 91.89 132.49 162.64 245.77 290.96 441.65 523.51 750.57 6' 93.02 85.81 107.91 105.42 154.49 190.75 285.90 338.49 562.49 640.43 908.23 7' 108.21 99.37 124.58 123.15 181.90 224.70 333.33 396.42 642.96 739.16 1,054.64 8' 119.36 109.78 137.22 136.85 202.25 251.16 368.71 439.19 705.41 814.01 1,164.61 10' 141.11 129.08 161.93 163.70 241.73 302.86 438.15 523.43 828.24 961.02 1,381.53 POINT 7.90 6.88 6.96 9.62 19.17 22.85 PLUG 14.37 18.77 31.86 37.40 45.72 99.09 121.90 NPT N/C N/C N/C N/C 4.58 6.12 12.24 12.24 68.83 84.12 91.77 ASTM THD 3.52 3.52 3.81 3.81 6.66 6.40 25.40 28.35 53.54 69.93 84.35 BLANK * PRICE PER FOOT TRI-SEAL ATTACHED W.O.P. SCREENS WIRE WRAPPED ON PLASTIC SLOT SIZES 6-8-10-12-15-18-20-25-30-40-60 3.43 2.06 4.11 3.55 7.42 10.15 14.02 17.32 29.47 41.18 61.42 $ 31.25 $ 28.74 5 X 3 5 X 4 PLAIN OPEN ENDS STANDARD - SPECIFY END FITTINGS SIZES THROUGH 18" AND OTHER SLOT SIZES AVAILABLE UPON QUOTATION

110 1" 1-1/4" 1-1/2" 2" 3" 4" 3' 11.78 12.41 17.55 16.19 34.85 41.46 4' 14.57 15.42 22.20 20.39 42.16 50.99 5" SDR21 6 row 5" SDR21 8 row 5' 17.38 18.43 26.87 24.61 49.48 60.50 89.39 91.92 105.20 6' 22.57 23.83 34.00 31.30 61.32 74.55 7' 25.36 26.84 38.67 35.51 68.63 84.07 8' 28.15 29.83 43.32 39.72 75.95 93.59 6" 8" 10" 12" 10' 33.75 35.85 52.64 48.14 90.59 112.63 156.19 161.26 187.82 315.50 430.68 621.85 15' 52.16 58.02 81.99 76.58 140.52 173.60 242.99 250.59 290.43 20' 64.79 70.34 102.68 94.92 174.40 218.49 304.27 314.41 367.52 606.66 820.76 1,208.53 Point 5.79 6.09 6.15 8.51 16.96 20.21 Plug 12.71 16.61 28.18 28.18 33.08 40.45 87.65 107.83 NPT Thd N/C N/C N/C N/C 4.06 5.41 10.83 10.83 10.83 60.88 74.41 81.18 BLANK * PRICE PER FOOT PVC PLASTIC WELL SCREENS SCHEDULE 40 SAWED SLOT TYPE SLOT SIZES 8-10-12-15-18-20-30-40-60 1.61 1.84 3.67 3.17 6.62 9.06 12.52 12.52 15.46 26.31 36.77 54.84 4 PALLET QUANTITY PRICING ON PAGE 3 NOTE: PLEASE SPECIFY 6 ROW OR 8 ROW FOR 5" NOTE: IF 5" SCREEN HAS 6 ROWS OUR OPEN AREA CHART IS INCORRECT PLAIN OPEN ENDS STANDARD - PLEASE SPECIFY END FITTINGS OTHER SLOT SIZES AVAILABLE UPON QUOTATION NOT ALL SLOT SIZES AVAILABLE FOR ALL PIPE SIZES *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

110 PVC PLASTIC WELL SCREENS SCHEDULE 80 SAWED SLOT TYPE SLOT SIZES 8-10-12-15-18-20-30-40-60 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 3" 4" 3' 14.18 13.42 13.46 15.72 25.69 25.36 61.36 77.00 4' 17.88 16.87 16.82 19.83 30.66 31.28 77.52 98.37 5' 21.59 20.34 20.18 23.94 35.62 37.18 93.68 119.73 6' 27.51 26.00 25.93 30.44 44.39 44.91 114.35 145.63 7' 31.21 29.46 29.29 34.55 49.36 50.81 130.51 166.98 8' 34.92 32.92 32.65 38.66 54.32 56.73 146.66 188.35 10' 42.34 39.84 39.35 46.88 64.26 68.55 178.98 231.09 15' 63.74 61.93 74.56 100.29 106.20 273.12 349.93 20' 78.31 77.36 92.39 125.13 133.05 351.18 454.05 Point 8.35 5.74 5.54 6.99 6.84 8.60 Plug 12.50 17.51 NPT Thd N/C N/C N/C N/C N/C N/C 4.06 5.41 BLANK * PRICE PER FOOT 2.61 2.33 2.23 3.06 4.89 5.06 16.12 21.91 PLAIN OPEN ENDS STANDARD - PLEASE SPECIFY END FITTINGS OTHER SLOT SIZES AVAILABLE UPON QUOTATION NOT ALL SLOT SIZES AVAILABLE FOR ALL PIPE SIZES *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

110 EFFECTIVE 4/3/2017 PVC PLASTIC WELL SCREENS PALLET QUANTITIES * Pallet prices are for pick up orders only SAWED SLOT TYPE SLOT SIZES 8-10-12-15-18-20-30-40-60 4" PVC PALLET QUANTITY PRICING 4" X 5' PVC - 36 PCS/PALLET $ 54.77 LIST PER LENGTH 4" X 10' PVC - 36 PCS/PALLET $ 101.94 LIST PER LENGTH 4" X 20' PVC - 36 PCS PALLET $ 189.93 LIST PER LENGTH THESE SCREENS WILL BE BANDED IN PALLET QUANTITY AND WILL NOT BE BOXED 5" SDR 21 PVC PALLET QUANTITY WITH 6 ROWS OF SLOTS AT 1/8 SPACING 5 X 20 BELL X PE - 23 PCS/PALLET $ 274.98 LIST PER LENGTH THESE SCREENS WILL BE BANDED IN PALLET QUANTITY AND WILL NOT BE BOXED *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

140 STAINLESS STEEL WATER WELL SCREENS - 304 SS TELESCOPE or PIPE SIZE COUPLING SIZE O.D. OF SCREEN PER FOOT MALE NPT FITTING FEMALE NPT FITTING PLATE W/ WELD RING 1" 1" 1.315 $ 25.77 $ 28.03 $ 28.71 FLUSH THREAD EACH * THREADED CAST IRON POINT SS POINT 1-1/4" HPS 1-1/4" HPS 1.660 $ 34.18 $ 32.37 $ 30.82 $ 60.35 2" PS 2" 2.375 $ 36.80 $ 41.88 $ 34.85 $ 44.32 $ 82.44 4" TEL 3" 3.750 $ 44.53 $ 72.59 $ 72.59 $ 58.95 $ 103.45 4" PS 4" 4.500 $ 62.74 $ 107.05 $ 120.12 $ 58.95 $ 126.31 5" TEL 4" 4.750 $ 63.07 $ 159.62 $ 120.12 $ 58.95 $ 112.22 5" PS/6" TEL 5" 5.563 $ 63.07 $ 178.80 $ 169.72 $ 58.95 6" PS 6" 6.625 $ 136.31 $ 174.11 $ 169.89 $ 76.21

Casing Size Connect Size SOFT Part # Right x Right SOFT Price TRI-SEALS / K-PACKERS HARD Part # Right x Right HARD Price Blanks for PVC Screen Part # rings not included, see below SOFT = 55 DUROMETER HARD = 80 DUROMETER Blank Price Blanks Attached to Screen Attached Price Note WGT/LBS WGT/LBS 2" 1-1/4" TS2125 $17.52 0.2 TS2125B $6.61 0.2 TS2125A $21.17 3" 1" 0.6 TS31H $15.53 3" 1-1/4" TS3125 $18.80 0.6 TS3125B $11.03 TS3125A $25.60 3" 2" TS32 $15.53 1.0 TS32B $7.41 0.2 TS32A $21.98 4" 1" TS41 $24.32 0.8 TS41B $18.43 TS41A $33.00 4" 1-1/4" TS4125 $22.38 0.8 TS4125B $14.62 0.4 TS4125A $29.18 4" 1-1/2" TS415 $27.78 1.0 TS415B $14.30 0.2 TS415A $28.86 4" 2" TS42 $17.87 1.2 TS42H $17.87 TS42B $9.77 0.4 TS42A $24.33 4" 2-1/2" TS425 $50.29 2.0 TS425H $50.29 TS425B $11.03 0.2 TS425A * 4" 3" TS43 $39.74 1.6 TS43H $41.82 TS43B $6.15 0.2 TS43A $24.74 4-1/8" 3" TS41253 $43.27 1.6 TS41253B $7.30 TS41253A $25.89 4-1/2" 2" TS452 $21.05 1.8 TS452B $11.03 0.4 TS452A $25.60 4-1/2" 3" TS453 $41.61 1.8 TS453B $7.41 0.2 TS453A $26.00 4-1/2" 3" SDR 17 TS45317 $41.61 1.8 5" 1" SDR21/SCH40 TS51 $24.95 1.2 TS51H $24.95 TS51B $18.43 TS51A $33.00 5" 1-1/4" SDR21/SCH40 TS5125 $25.89 1.2 TS5125B $18.12 TS5125A $32.68 5" 2" SDR21/SCH40 TS52 $26.55 1.6 TS52B $18.43 0.6 TS52A $33.00 5" 2-1/2" SDR 17 TS52517 $21.45 2.6 5" 3" SDR21/SCH40 TS53 $45.54 2.0 TS53H $45.54 TS53B $12.66 0.4 TS53A $31.25 5" 3" SDR 17 TS5317 $46.50 1.8 TS5317B $13.93 TS5317A $32.52 5" 4" SDR21/SCH40 TS54 $67.36 2.4 TS54B $9.40 0.2 TS54A $28.74 5-1/8" 4".188 BI-SEAL BS51254 $66.54 2.4 BS51254B $8.32 0.2 BS51254A $27.66 5-3/4" 4" TS5754 $71.97 2.4 TS5754B $9.58 TS5754A $28.92 6" 1" TS61 $38.94 1.6 6" 3" TS63 $64.42 3.8 TS63H $64.42 TS63B $26.84 1.0 TS63A $45.43 6" 4" TS64 $68.44 4.6 TS64H $68.44 TS64B $12.51 0.6 TS64A $31.86 6" 5" TS65 $78.03 3.0 TS65B $12.07 0.2 TS65A $37.41 6-1/4" 4" TS6254 $70.78 5.2 TS6254H $70.78 TS6254B $12.80 0.6 TS6254A $32.14 6-1/4" 5" BI-SEAL BS6255 $85.33 3.0 BS62554B $12.07 0.6 BS62554A $37.41 8" 6" TS86 $134.77 13.0 TS86B $21.87 0.2 TS86A $69.49 Weld-On PVC Ring for use with PVC Blanks Thin Wall Steel Couplings Casing Size Connect Size Length Single Seal Part # Single Seal Price WGT/LBS Size Part # Price Right x Right Part # Price WGT/LBS 6" 4" TS64W 57.03 6" 5" 8" TS658W $53.02 9.0 1-1/4" 200310 $7.34 1-1/4" 10042101 $14.05 6" 5" 12" TS6512W $68.63 2" 200316 $7.58 3" 10042241 $33.95 8" 6" 8" TS868W $85.56 3" 200324 $7.40 4" 10042321 $60.88 8" 6" 12" TS8612W $111.94 4" 200332 $7.77 5" 10042401 $79.61 5" 200340 $10.77 * PRICES AVAILABLE UPON REQUEST 6" 200348 $30.13 * ALL TRI-SEALS ARE MEANT FOR USE IN SCH40 PVC UNLESS OTHERWISE STATED 1701 *PRICES SUBJECT TO CHANGE WITHOUT NOTICE*

1704 SOFT = 55 DUROMETER HARD = 80 DUROMETER SHALE TRAPS / FORMATION PACKERS Part # Description List Price WGT/LBS ST52S 5 X 2 SHALE TRAP-SOFT $ 11.94 0.6 ST52SWC 5 X 2 SHALE TRAP-SOFT W/ 2" CLAMP $ 15.05 0.6 ST52H 5 X 2 SHALE TRAP-HARD $ 11.63 0.6 ST52HWC 5 X 2 SHALE TRAP-HARD W/ 2" CLAMP $ 14.74 0.6 ST62S 6 X 2 SHALE TRAP-SOFT $ 12.66 0.6 ST62SWC 6 X 2 SHALE TRAP-SOFT W/ 2" CLAMP $ 15.77 0.8 ST62H 6 X 2 SHALE TRAP-HARD $ 12.33 0.8 ST62HWC 6 X 2 SHALE TRAP-HARD W/ 2" CLAMP $ 16.85 0.8 ST63S 6 X 3 SHALE TRAP-SOFT $ 14.08 0.6 ST63SWC 6 X 3 SHALE TRAP-SOFT W/ 4" CLAMP $ 17.79 0.8 ST63H 6 X 3 SHALE TRAP-HARD $ 13.74 0.8 ST63HWC 6 X 3 SHALE TRAP-HARD W/ 4" CLAMP $ 17.42 0.8 ST74S 7 X 4 SHALE TRAP-SOFT $ 15.56 0.8 ST74SWC 7 X 4 SHALE TRAP-SOFT W/ 4" CLAMP $ 19.24 0.8 ST74H 7 X 4 SHALE TRAP-HARD $ 15.14 0.8 ST74HWC 7 X 4 SHALE TRAP-HARD W/ 4" CLAMP $ 18.82 1 ST84S 8 X 4 SHALE TRAP-SOFT $ 15.56 0.8 ST84SWC 8 X 4 SHALE TRAP-SOFT W/ 4" CLAMP $ 19.24 1 ST84H 8 X 4 SHALE TRAP-HARD $ 15.14 1 ST84HWC 8 X 4 SHALE TRAP-HARD W/ 4" CLAMP $ 18.82 1 ST845S 8 X 4-1/2 SHALETRAP-SOFT $ 15.56 1.2 ST845SWC 8 X 4-1/2 SHALE TRAP-SOFT W/ 6" CLAMP $ 18.82 1.2 ST845H 8 X 4-1/2 SHALE TRAP-HARD $ 15.14 1.2 ST845HWC 8 X 4-1/2 SHALE TRAP-HARD W/ 6" CLAMP $ 19.24 1.4 ST85S 8 X 5 SHALE TRAP-SOFT $ 18.45 1 ST85SWC 8 X 5 SHALE TRAP-SOFT W/ 6" CLAMP $ 22.79 1 ST85H 8 X 5 SHALE TRAP-HARD $ 17.94 1 ST85HWC 8 X 5 SHALE TRAP-HARD W/ 6" CLAMP $ 22.28 1.2 ST95S 9 X 5 SHALE TRAP-SOFT $ 18.71 1 ST95SWC 9 X 5 SHALE TRAP-SOFT W/ 6" CLAMP $ 23.05 1.2 ST95H 9 X 5 SHALE TRAP-HARD $ 18.71 1.2 ST95HWC 9 X 5 SHALE TRAP-HARD W/ 6" CLAMP $ 23.05 1.2 ST106S 10 X 6 SHALE TRAP-SOFT $ 24.97 1.3 ST106SWC 10 X 6 SHALE TRAP-SOFT W/ 8" CLAMP $ 33.87 1.8 ST106H 10 X 6 SHALE TRAP-HARD $ 24.24 1.8 ST106HWC 10 X 6 SHALE TRAP-HARD W/ 8" CLAMP $ 33.14 1.8 ST1069S 10 X 6.9 SHALE TRAP-SOFT $ 25.30 1.4 ST1069SWC 10 X 6.9 SHALE TRAP-SOFT W/ 8" CLAMP $ 34.20 1.4 ST1069H 10 X 6.9 SHALE TRAP-HARD $ 24.64 1.4 ST1069HWC 10 X 6.9 SHALE TRAP-HARD W/ 8" CLAMP $ 33.54 1.6

DDS 1706 WP 1707 DRAW DOWN SEAL SIZE OF CASING DROP SIZE NOTES PART NUMBER PRICE WGT/LBS 4 1 DDS41 $ 41.83 $ 0.80 4 1-1/4 DDS4125 $ 39.27 $ 0.80 4 1-1/4 5 HOLE DDS41255HOLE $ 41.59 $ 0.80 4 1-1/2 DDS415 $ 44.67 $ 1.00 5 1 DDS51 $ 41.83 $ 1.20 5 1-1/4 DDS5125 $ 42.78 $ 1.20 5 1-1/4 5 HOLE DDS51255HOLE $ 45.09 $ 1.20 5 2 DDS52 $ 43.42 $ 1.60 6 1 DDS61 $ 55.84 $ 1.60 6 3 DDS63 $ 86.24 $ 3.80 6-1/4 X 4 PVC WELL PACKER SOFT 6-1/4 X 4 PVC WELL PACKER HARD 6-1/4X4 WELL PACKER ON SDR26 PVC WELL PACKER WP6254S $ 77.67 WP6254WP66 $ 77.67 WP6254SDR26 $ 89.00 * Molded on 4" SCH40 PVC with 6 sealing flanges, 20" OVA length. Flexible, fits 6" or 6-1/4" 6.83 OVA diameter Can't find what you are looking for? Ask us about our CUSTOM RUBBER MOLDING capabilities!

180 IRRIGATION FILTERS & FILTER CRADLES PART NUMBER DESCRIPTION WT/LBS 40G FILTER OPTIONS IR40G 40G SUCTION FILTER $148.70 5.0 IR40GCK 40G W/ CHECK VALVE $181.40 6.0 IR40GFM 40G W/ FILTER MEDIA $163.63 7.0 IR40GFMCK 40G W/ FILTER MEDIA & CHECK VALVE $193.78 8.4 40G SPARE PARTS IR40GTOP TOP OR BOTTOM FOR 40G $39.27 0.6 IR40GCENT 2" SLOTTED CENTER FOR 40G $22.33 0.8 IRNIPPLE 2" SCH80 CLOSE NIPPLE $5.38 0.1 IR40GPLG PLUG FOR 40G $5.61 0.1 IR40GMED FILTER MEDIA FOR 40G $8.86 0.4 IR6STRNBBL 6" STRAINER BARREL $65.50 1.8 IRCK 2" THREADED CHECK VALVE $21.88 1.4 80G FILTER OPTIONS IR80G 80G SUCTION FILTER $258.91 15.0 IR80GCK 80G W/ CHECK VALVE $281.22 16.0 IR80GFM 80G W/ FILTER MEDIA $279.34 17.0 IR80GFMCK 80G W/ FILTER MEDIA & CHECK VALVE $301.21 18.4 80G SPARE PARTS IR80GTOP TOP ONLY FOR 80G $46.03 1.6 IR80GBOT BOTTOM ONLY FOR 80G $34.12 1.4 IRG80GMED FILTER MEDIA FOR 80G $20.00 1.0 STAINLESS STEEL J-HOOK W/ NUT & WASHER * Comes as one j-hook, one nut, and one washer IRJHOOK $5.90 0.1 IR12STRNBBL 12" STRAINER BARREL $127.52 2.4 IRNIPPLE 2" SCH80 CLOSE NIPPLE $5.38 0.1 IR6STRNBBL 6" STRAINER BARREL $65.50 1.8 IRCK 2" THREADED PVC CHECK VALVE $21.88 1.4 FILTER CRADLES IRTR2 TR2 FILTER CRADLE $230.59 25.0 IRTR2ALUM TR2 ALUMINIUM FILTER CRADLE $350.86 IRTR2HD TR2 HEAVY DUTY FILTER CRADLE $255.40 IRTR2AG TR2 AGRICULTURAL FILTER CRADLE $498.39 IR40GSTAND BIG FOOT IRRIGATION STAND FOR 40G $69.58 7.8 IRS80 S80 (80G STAND) $220.68 20.0 IRL2 L2 UNIT $91.74 IRPONDSLED BIG FOOT POND SCREEN SLED $190.11 IRWS32PONDSLED4" WOP SCREEN FOR POND SLED 80" $250.37 FILTER CRADLE ACCESSORIES IRLFBRACKET LF BRACKET $54.55 2.6 IRTPOSTKIT T-POST KIT (2 T-POST) $57.03

190 EFFECTIVE 4/3/2017 ENVIRONMENTAL & MORRISON PRODUCTS * NON-STOCK ITEMS, PLEASE CALL FOR PRICING ITEM NUMBER DESCRIPTION 190116780000 678XA: 2" LOCKING PLUG $ 52.18 190116780100 678XA: 4" LOCKING PLUG $ 57.73 190116 678XA: 6" LOCKING PLUG $ 110.03 * OTHER SIZES AVAILABLE UPON QUOTATION 418XA: 7 X 10 LIMITED ACCESS MANHOLE 190127101 QTY 1: 1-59 $ 120.01 190127102 QTY 2: 60-119 $ 108.04 418XA: 8 X 12 LIMITED ACCESS MANHOLE 190128121 QTY 1: 1-59 $ 131.75 190128122 QTY 2: 60-119 $ 119.20 1901297 418XA: 9 X 7 LIMITED ACCESS MANHOLE * 19012912 418XA: 9 X 12 LIMITED ACCESS MANHOLE * 19012127 418XA: 12 X 7 LIMITED ACCESS MANHOLE * 418XA: 12 X 12 LIMITED ACCESS MANHOLE 1901212121 QTY 1: 1-19 $ 205.99 1901212122 QTY 2: 20+ $ 181.68 1901291200 1901211212 418XAW: 9 X 12 LIMITED ACCESS MANHOLE (WELDED SKIRT) 418XAW: 12 X 12 LIMITED ACCESS MANHOLE (WELDED SKIRT) * *

190 EFFECTIVE 4/3/2017 ENVIRONMENTAL & MORRISON PRODUCTS * NON-STOCK ITEMS, PLEASE CALL FOR PRICING ITEM NUMBER DESCRIPTION 190121812 418TM: 18 X 12 TANK MONITOR MANHOLE * 190121818 418TM: 18 X 18 TANK MONITOR MANHOLE * 190122418 418: 24 X 18 LIMITED ACCESS MANHOLE * 519: 9" WATERTIGHT MANHOLE 1901251991 QTY 1: 1-19 $ 367.70 1901251992 QTY 2: 20+ $ 330.96 1901251912 519: 12" WATERTIGHT MANHOLE * 19012242424 524: 24 X 24 X 24 LIMITED ACCESS MANHOLE $ 691.15 524: 24 X 24 X 24 LIMITED ACCESS MANHOLE 190122424241 * (WITH HANDLE) 19019445 4 X 4 X 5 WELL PROTECTOR $ 193.63 19013665 680XA: 6 X 6 X 5 WELL PROTECTOR $ 249.26 19013885 680XA: 8 X 8 X 5 WELL PROTECTOR $ 467.84

PITTLESS WRENCH T-HANDLE PITTLESS WRENCH T-HANDLE THANDLE7 7 FOOT $55.21 THANDLE8 8 FOOT $57.56 THE BIG FOOT CONTROL STICK THE BIG STICK PART # BIGSTICK $297.08 Designed to be a stand-alone pump / pressure control unit, that accurately transfers pressures from the pump to the pressure switch Designed to be placed at the well site in any weather environment The Big Stick comes standard as a four foot bury unit with a one-inch male npt threaded bottom, a 100# pressure gauge, and a 30/50 pressure switch. Comes fully assembled with an integrated ball valve that allows the switch and gauge to be isolated for easy servicing