GRASS NOVA PRO TOUCH LATCH SENSO Application: For drawer and front pull-out Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with self opening mechanism by touching the front panel on any spot Adjustable: Front two dimensional adjustable Version: With anti-friction bearing and syncronization unit, straight inside wall, back panel dowel preassembled, double wall housing with easy clean lip, with hooks to easy click on the front panel Installation: To screw in side panel for 32 mm system Adjustability View from inside View from outside Height adjustability Loosening the screw (2) Move front panel with eccentric screw (3) in correct position Adjustability ±2 mm Tighten the screw (2) Side adjustability Pull clamp lever (1) to the backside and hold it Lift front a bit and move it over the ribbing Adjustability ±1. mm Release the clamp lever (1) Bathroom worlds Moved by Grass Grass moves with individuality. Living room worlds Moved by Grass Grass moves through the certainty of high-end quality. Bathroom worlds Moved by Grass Grass moves through differentiating design. SEA.24
GRASS NOVA PRO DELUXE TOUCH LATCH SENSO, height 90 mm Load capacity: 40 kg Colour: White aluminium, RAL 9006 Nominal length 270 mm 3.17.141 300 mm 3.17.142 30 mm 3.17.143 400 mm 3.17.144 40 mm 3.17.14 00 mm 3.17.146 0 mm 3.17.147 Note Please order synchronization unit separately. Installation Back panel Locking unit Bottom width Carcase front edge Front panel Bottom width + 1 mm Nominal length + 19 mm SEA.2
NOVA PRO CLASSIC TOUCH LATCH SENSO, load capacity 40 kg Height 63 mm Height 90 mm Colour: White aluminium, RAL 9006 Nominal length Colour: White aluminium, RAL 9006 Nominal length 400 mm 3.13.144 40 mm 3.13.14 00 mm 3.13.146 0 mm 3.13.147 270 mm 3.14.141 300 mm 3.14.142 30 mm 3.14.143 400 mm 3.14.144 40 mm 3.14.14 00 mm 3.14.146 0 mm 3.14.147 Installation Back panel Installation Back panel Bottom width Bottom width Front panel Front panel Bottom width + 1 mm Locking unit Carcase front edge Nominal length + 19 mm Note Please order touch latch senso synchronization unit separately. Bottom width + 1 mm Locking unit Carcase front edge Nominal length + 19 mm Note Please order touch latch senso synchronization unit separately. SEA.26
Accessories TOUCH LATCH SENSO Synchronization unit Area of application: To synchronize the runner Material: Aluminium, zinc alloy Carcase width Panel thickness 40 mm 16 mm 7.99.14 600 mm 7.99.160 900 mm 7.99.190 1,200 mm 7.99.196 40 mm 19 mm 7.99.146 600 mm 7.99.161 900 mm 7.99.191 1,200 mm 7.99.197 TOUCH LATCH SENSO Synchronization unit for cut to size Rail Lever Version Synchronization rail, length 1,080 mm 7.99.100 Synchronization lever 7.99.101 TOUCH LATCH SENSO Drilling jig Version: To accurately drill the locking unit for the TOUCH LATCH SENSO runner 8.18.131 Instructions for use: 1. Depending on nominal length, insert the stop pin into the drilling jig and position jig against the cabinet. 2. Position the drilling jig on the installed TOUCH LATCH SENSO runner. 3. Drill the two fixing holes for the locking unit. SEA.27
GRASS NOVA PRO Double wall drawer system Area of application: For drawer and front pull-out solutions Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with soft close function Adjustability: Front two dimensional adjustable Version: With anti-friction bearing and synchronised pull-out, straight inside wall housing with easy, clean lip, with hooks to easy clip on the front panel Installation: To screw in side panel for 32 mm system DELUXE Version Adjustability CLASSIC Version Height adjustability Loosening the screw (2) Move front panel with eccentric screw (3) in correct position Adjustability ±2 mm Tighten the screw (2) Installation View from inside Carcase front edge Side adjustability Pull clamp lever (1) to the backside and hold it Lift front a bit and move it over the ribbling Adjustability ±1. mm Release th eclamp lever (1) Internal carcase depth = Nominal length + x Bottom length = nominal length - 19 mm Bottom Carcase front edge Back panel Drawer x = 3 mm Internal drawer x = 11. mm View from outside Installation Before press in After press in No groove or adjustment on bottom necessarry Bottom installation with claws or to screw SEA.28
GRASS NOVA PRO DELUX, height 90 mm Installation Colour: White aluminium, RAL 9006 Version: With AIRMATIC Load capacity: 40 kg Nominal length Extension length 270 mm 21 mm 3.17.211 300 mm 281 mm 3.17.212 30 mm 331 mm 3.17.213 400 mm 381 mm 3.17.214 40 mm 431 mm 3.17.21 00 mm 481 mm 3.17.216 0 mm 31 mm 3.17.217 600 mm 81 mm 3.17.218 Back panel Front panel Bottom width Bottom width + 1 mm Carcase front edge Kitchen of the world. Moved by Grass. Grass moves through differentiating design. Recognized with many awards and employed by the world's best designers - that's furniture hardware by Grass. Both hinge and slide systems offer impressive product design and function, which in turn enable unique furniture design. For the world's best and most attractive kitchens. SEA.29
GRASS NOVA PRO CLASSIC, height 63 mm Colour: White aluminium, RAL 9006 Version: With AIRMATIC Load capacity: 40 kg Nominal length Extension length 400 mm 381 mm 3.13.214 40 mm 431 mm 3.13.21 00 mm 481 mm 3.13.216 0 mm 31 mm 3.13.217 Installation Back panel Front panel Bottom width Bottom width + 1 mm Carcase front edge GRASS NOVA PRO CLASSIC, height 90 mm Installation Carcase front edge Colour: White aluminium, RAL 9006 Version: With AIRMATIC Load capacity: 40 kg Nominal length Extension length EL 270 mm 21 mm 3.14.211 300 mm 281 mm 3.14.212 30 mm 331 mm 3.14.213 400 mm 381 mm 3.14.214 40 mm 431 mm 3.14.21 00 mm 481 mm 3.14.216 0 mm 31 mm 3.14.217 600 mm 81 mm 3.14.218 Back panel Bottom width Front panel Bottom width + 1 mm SEA.30
GRASS NOVA PRO DELUXE/ CLASSIC Railing system Material: Tube steel, cover sleeve, front rail holder and back rail holder plastic Finish: Tube powder coated white aluminium, RAL 9006 cover sleeve, front rail holder and back rail holder anthracite Mounting timber back: Screw fixing of front and back rail holders Mounting steel back: Screw fixing of front rail holder, clip in back rail holder GRASS NOVA PRO Side railing system Supplied with 2 Cover sleeves 2 Front rail holder 2 Back rail holder Nominal length 300 mm 8.02.930 30 mm 8.02.93 400 mm 8.02.940 40 mm 8.02.94 00 mm 8.02.90 0 mm 8.02.9 600 mm 8.02.960 GRASS NOVA PRO Cross railing system Supplied with 1 Railing 2 Cross railing holder For cabinet width 300 mm 8.01.930 30 mm 8.01.93 400 mm 8.01.940 40 mm 8.01.94 00 mm 8.01.90 0 mm 8.01.9 600 mm 8.01.960 1,000 mm 8.01.998 SEA.31
GRASS NOVA PRO Cross divider rail clip Colour Grey, RAL 7016 8.01.03 GRASS NOVA PRO Bottle holder clip Colour Grey, RAL 7016 8.01.02 Bottle holder for round railing GRASS NOVA PRO Synchronisation system Area of application: For very wide drawers, for side panel thickness 16 or 19 mm Installation: Screw fixing Nominal length For carcase width 900 mm 40 mm 7.99.812 00 mm 7.99.822 0 mm 7.99.832 600 mm 7.99.842 60 mm 7.99.82 For carcase width 1,000 mm 40 mm 7.99.813 00 mm 7.99.823 0 mm 7.99.833 600 mm 7.99.843 60 mm 7.99.83 For carcase width 1,200 mm 40 mm 7.99.81 00 mm 7.99.82 0 mm 7.99.83 600 mm 7.99.84 60 mm 7.99.8 SEA.32
GRASS NOVA PRO Accessories Must be used with round railing (please order separately) Tool-free installation (retrofitting also possible) No drilling necessary Cross divider railing can be fitted Tilt adjustment of front by means of round railing Finish: Cover set grey, side element powder coated silver metallic, RAL 9006 or frosted glass (toughened) The side element may also be manufactured from any material with a thickness of 6 mm. (eg. glass, wood or acrylic) NOVA PRO Side panel fixing set Version For NOVA PRO CLASSIC 7.76.800 For NOVA PRO DELUXE 7.76.802 Packing: 1 pc NOVA PRO Side panel Nominal length Version 40 mm Smooth 7.76.84 00 mm 7.76.80 0 mm 7.76.8 600 mm 7.76.860 40 mm Ripped 7.76.847 00 mm 7.76.82 0 mm 7.76.87 600 mm 7.76.862 Packing: 1 pair SEA.33
Intelligent movement design for exclusive comfort. The demand for electronically controlled furniture is on the up, just like the demand for the handleless design. GRASS Sensotronic provides the only integrated solution. Drawers, pull-out units and base drawers not only open and close simply by tapping the front, but also think for themselves. The Sensotronic feels resistances, avoids collisions, protects against jamming and moves different weights up and down at the same set speed. GRASS Sensotronic is simple in assembly as well as in operation. SEA.34
GRASS NOVA PRO CLASSIC Rectangular side railing system Material: Tube steel, cover sleeve, front rail holder and back rail holder plastic Finish: Tube powder coated silver metallic, RAL 9006, cover sleeve, front rail holder and back rail holder silver metallic Mounting timber back: Screw fixing of front and back rail holders GRASS NOVA PRO Rectangular side railing Nominal length Length 300 mm 29 mm 8.07.230 30 mm 34 mm 8.07.23 400 mm 39 mm 8.07.240 40 mm 44 mm 8.07.24 00 mm 49 mm 8.07.20 0 mm 4 mm 8.07.2 600 mm 9 mm 8.07.260 GRASS NOVA PRO Rectangular side railing fixing set Screw fixing Angle of front panel adjustment Press fitting Installation Screw fixing 8.07.200 Press fitting 8.07.201 SEA.3
GRASS NOVA PRO CLASSIC Rectangular railing accessories Area of application: For installation on front and back panel Material: Plastic Installation: For screw fixing Colour White aluminium, RAL 9006 8.2.290 GRASS NOVA PRO Rectangular cross railing For carcase width Length For side panel thickness 16 19 mm 300 mm 207 mm 8.0.231 30 mm 27 mm 8.0.236 400 mm 307 mm 8.0.241 40 mm 37 mm 8.0.246 00 mm 407 mm 8.0.21 0 mm 47 mm 8.0.26 600 mm 07 mm 8.0.261 For cut to size 913 mm 8.0.290 GRASS NOVA PRO Rectangular cross section clip Colour White aluminium, RAL 9006 8.17.233 SEA.36
GRASS NOVA PRO Rectangular side railing with steel post Area of application: For 3 side railing systems, only usable for NOVA PRO CLASSIC Material: Steel Installation: To clip in front adapter and into double wall runner Front adjustment Nominal length Length 300 mm 286 mm 8.06.230 400 mm 386 mm 8.06.240 40 mm 436 mm 8.06.24 00 mm 486 mm 8.06.20 0 mm 36 mm 8.06.2 600 mm 86 mm 8.06.260 Adjustment screw Tighten adjustment screw, front panel move back Losing the adjustment screw, front panel move forward Back view GRASS NOVA PRO Rectangular front adapter for side railing with steel post Material: Steel Finish: White, RAL 9010 Screw fixing Press fixing Installation Screw fixing 8.17.706 Press fitting 8.17.411 Packing: 2 pcs. GRASS NOVA PRO Spacer Carcase front edge Area of application: For drawer runners behind hinged doors Version: The hole pattern is suitable for all GRASS NOVA PRO runners, the spacer can be used left and right Thickness: 2 mm Material: Plastic Colour White, RAL 9010 8.00.000 SEA.37
GRASS NOVA PRO Internal drawer fronts Turns your Nova Pro Drawer into an interior pull-out Suitable for drawer sides with height of 90 mm Finish: Powder coated silver metallic, RAL 9006 Anthracite front panel holder Drawer sides and side railings must be ordered separately For 19 mm side panel Front panel Front panel holder For carcase width 600 mm 8.04.013 900 mm 8.04.019 1,200 mm 8.04.023 Colour Anthracite, RAL 7016 8.04.71 Packing: 1 pair Front panel with round railing Front panel holder for round railing For carcase width 600 mm 8.04.063 900 mm 8.04.069 1,200 mm 8.04.073 Colour Anthracite, RAL 7016 8.04.73 Packing: 1 pair Front panel with rectangular railing For carcase width 600 mm 8.00.013 900 mm 8.00.019 1,200 mm 8.00.023 Front panel holder for rectangular railing Colour Anthracite, RAL 7016 8.04.72 Packing: 1 pair SEA.38
META BOX Kitchen metal drawer Drawer runner single extension Area of application: For drawer runners Load capacity: 30 kg Material: Steel Finish: Plastic coated Version: With roller runner Front adjustable facility: Two dimensions Fitting to side panel: Screw fixing into 32 mm series drilled holes Height: 86 mm Extension loss AV: 9 mm Norminal length Extension length AL Colour 40 mm 37 mm Grey metallic, RAL 9006 4.71.0 37 mm White, RAL 9010 4.71.70 00 mm 407 mm Grey metallic, RAL 9006 4.71.06 407 mm White, RAL 9010 4.71.706 Drilling dimensions Back installation dimensions For Ø3. mm chipboard screws with 7 mm diameter head Front installation dimensions Bottom panel width +14 mm For press-in-front fixing brackets to pre-drill Ø10 mm x 12 mm For Ø4 mm chipboard screws or standard Euro screws with 8 mm diameter head SEA.39
Side railing set Material: Steel struts, plastic bracket Version: Railing can be rotated to adjust the incline of the front panel Supplied with: 2 adjustables rails, 2 rear fixing brackets Length Colour 40 mm Grey metallic, RAL 9006 4.76.90 White, RAL 9010 4.76.70 00 mm Grey metallic, RAL 9006 4.76.906 White, RAL 9010 4.76.706 Cross railing Material: Steel Version: Cross rail can be shorten Length Colour 1,000 mm Grey metallic, RAL 9006 4.76.89 White, RAL 9010 4.76.789 Cross railing connectors Material: Plastic Area of application: Used for connecting the cross railings Colour Grey metallic, RAL 9006 4.76.80 White, RAL 9010 4.76.780 SEA.40
Accessories for META BOX system Spacer Area of application: For installation behind hinged doors Installation: For screw installation into system 2 mm and 32 mm Finish Plastic white 8.12.836 Door deflection roller Drawer Door deflection roller Area of application: For protection of swing doors Mounting Right 8.12.809 Left 8.12.818 Door Locking bracket Locking bracket Area of application: For central locks with Ø 7 mm locking pin Finish Nickel plated 8.12.92 Drawer Supporting bracket Area of application: For mounting the cabinet rail when no side panel is available Thickness: 2 mm Installation: For screw fixing Finish Nickel plated 8.12.943 SEA.41
Drawer Inserts Cutlery insert, injection moulded Cutlery insert, deep-drawn Material: Plastic (injection moulded) Colour: White Version: Deep-drawn from panel material, with wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm Material: Plastic (deep-drawn) Colour: White grained Version: Deep-drawn from panel material, with wide edge for cutting to exact drawer size For carcase depth: 00 or max. 600 mm Height: 7 mm Material thickness: 2. mm For carcase width 300 mm 6.60.72 400 40 mm 6.60.761 00 0 mm 6.60.770 600 mm 6.60.789 For carcase width For carcase depth 00 mm 300 mm 6.62.701 30 mm 6.62.68 400 mm 6.62.710 40 mm 6.62.729 00 mm 6.62.738 0 mm 6.62.694 600 mm 6.62.747 For carcase depth 600 mm 300 mm 6.62.76 30 mm 6.62.76 400 mm 6.62.774 40 mm 6.62.783 00 mm 6.62.792 0 mm 6.62.809 600 mm 6.62.818 SEA.42
Drawer Inserts Cutlery insert A B Material: Plastic Colour: Aluminium silver Version: With wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm For carcase width C D A 400 mm 6.84.03 B 00 mm 6.84.0 C 0 mm 6.84.06 D 700 mm 6.84.08 E 800 mm 6.84.09 00 440 41 00 E A B Material: Plastic Colour: White grained Version: With wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm C E D For carcase width A 30 mm 6.8.73 B 400 mm 6.8.740 C 40 mm 6.8.74 D 00 mm 6.8.70 E 0 mm 6.8.7 SEA.43
Drawer Inserts Cutlery insert A C B Material: Plastic Colour: White grained Version: With wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm For carcase width A 400 mm 6.86.740 B 00 mm 6.86.70 C 0 mm 6.86.7 SEA.44
Drawer Inserts Plates organization for drawer Material: Polystyrene (PS) Version: With wide edge for cutting to exact drawer size For carcase depht: 600 mm For carcase width: 900 mm Material thickness: 2. mm Finish Width Height White 800 840 mm 60 mm 6.0.77 Silver coloured 800 840 mm 6.0.7 Edge profile for cutlery inserts Area of application: To fit on all types of cutlery inserts with thickness of basic material 2. mm Material: Plastic Finish Length Chromed matt 00 mm 6.89.499 Mirror silver 6.89.99 Packing: 2 pcs. Anti slide sheet Area of application: For lining the bottom of the drawer Material: Polystyrene - caoutchouc Version: Self-adhesive Finish Dim. (L x W) Grey 1,000 x 90 mm 47.91.71 SEA.4
Drawer Inserts Drawer divider system Material: Stainless steel lengthways dividers and tray, plastic side panels and crossways dividers Finish: Brushed lengthways dividers and trays grey side panels and crossways dividers Nominal length: 470 mm Height: 64 mm For carcase width: 27 1,200 mm For carcase depth: 00 mm Compartment divisions Width 10 mm 6.38.022 202 mm 6.38.042 291 mm 6.38.062 Accessories Length Trays, 88 mm wide Cutlary insert and divider Width 103 mm 6.38.012 88 mm 6.38.201 176 mm 6.38.202 280 mm 6.38.02 200 mm 6.38.032 297 mm 6.38.072 Divider Vertical panel End connector 264 mm 6.38.203 88 mm 6.38.220 176 mm 6.38.221 470 mm 6.38.232 88 mm 6.38.210 176 mm 6.38.211 SEA.46