Product Specification Embedded Storage Solutions Embedded SATA EDOM SATAIII M2SCFII-4M Series CSXXXXGRE-XX09XXXX CSXXXXGRE-XX10XXXX P
Features: Compliance with - Serial ATA Revision 3.1 specifications - SATA3(6Gb/s) interface - Backward compatible with SATA1(1.5Gb/s) and SATA2(3Gb/s) interface - ATA/ATAPI-8 and ACS-2 command set - Data Set Management command(trim) - SATA Device Sleep (DevSleep) - Self-Monitoring, Analysis,and Reporting Technology(S.M.A.R.T) Capacities 16GB, 32GB, 64GB, 128GB Performance - Sequential Read (max): 540 MB/sec - Sequential write (max): 197 MB/sec - Random read 4K(max): 126 MB/sec - Random write 4K(max): 270 MB/sec Data Protection and Reliability - Built-in hardware ECC, enabling up to 66 bit correction per 1KB - Supports ATA8 security feature set - Supports data security erase and quick erase - Internal data shaping technique increases data endurance - Software/Hardware write protect option - Global wear leveling algorithm NAND Flash Type - MLC Temperature ranges Operating: - Standard: 0 C to 70 C - Extended: -25 C to 85 C - Industrial: -40 C to 85 C Storage: - -55 C to 95 C Supply voltage 3.3 V ±5% Power consumption - Idle mode: 80 ma - Active mode(max): 450 ma Form factor - M.2 (NGFF) Shock & Vibration - Shock: 1000G@1ms - Vibration: 20 G Certification and Compliance - FCC - CE - RoHs - WEEE Total Bytes Written (TBW) MLC 16GB: 32GB 64GB: 128GB: MTBF 24TB 48TB 96TB 192TB > 3,000,000 hours 1 26 SEP 2017
Revision History: Description Date 1.0 Internal release 2017/04/28 2 26 SEP 2017
CONTENTS 1. Product Description... 4 1.1 Introduction... 4 1.2 Block Diagram... 4 2. Product Specifications... 5 2.1. Capacity... 5 2.2. Performance... 5 2.3. SoftWare Function... 5 2.4. SMART Attributes... 6 2.5. ACPI M.2 SATAIII SATA Interface... 7 2.6. Device Goldfinger Pin Signal Definitions... 8 3. Power Characteristics... 9 3.1. Supply Voltage... 9 3.2. Power Consumption... 9 4. Mechanical Specifications... 9 4.1. Dimensions... 9 5. Reliability Specifications... 11 5.1. Environmental Conditions... 11 5.2. TBW(TeraBytes Written)... 11 6. Ordering Informations... 11 7. Contact Information... 12 3 26 SEP 2017
1. Product Description 1.1 Introduction ACPI M.2 SATAIII 2242 series with 6.0 Gb/s SATA interface is the next generation form factor M.2's more flexible specification allows for different module widths and lengths, and with advanced interfacing features, makes the M.2 form factor more suitable for NAND flash Solid State Drive (SSD) applications in general. ACPI M.2 SATAIII 2242 series allows for length dimension of 80mm and its interface make it a perfect choice for small hand held and miniaturized devices. For certain embedded applications where space is limited, ACPI M.2 SATAIII 2242 series specifications provide for different thicknesses of M.2 SSDs single-sided versions and dual-sided versions. At the same time, ACPI M.2 SATAIII 2242 series is able to deliver exceptional read/write speeds, making it ideal for use in heavy-loading or multi-tasking applications. ACPI M.2 SATAIII 2242 data is protected by built in 66 bits per 1KB Error Correction Code (ECC). ACPI M.2 SATAIII 2242 series has intelligent controller manages interface protocols, data storage and retrieval, defect handling and diagnostics, power saving modes, wear leveling and flash block management. ACPI can also provide specialized services to OEMs designing customized hardware and systems by offering: Locked bill of material (BOM). Pre-installed software, custom software imaging and ID strings. Custom packaging and labeling. Comprehensive supply chain management (SCM). Customer specified testing. Field application engineering service for complete pre- and post-sales technical support. Optional activity LED indication and write protection activated. 1.2 Block Diagram 4 26 SEP 2017
2. Product Specifications 2.1. Capacity MLC: From 16GB up to 128GB Raw Capacity Cylinder Head Sector Capacity LBA 16 GB 16383 16 63 14.7GB 30,932,992 32 GB 16383 16 63 29.4GB 61,865,984 64 GB 16383 16 63 58.9GB 123,731,968 128 GB 16383 16 63 117GB 247,463,936 Notes: One LBA = 512 Byte. Notes: One LBA = 512 Byte. 2.2. Performance Capacity 16GB 32GB 64GB 128GB Sequential Read(Max) Sequential Write(Max) IOPS(4KB QD32) Random Read IOPS(4KB QD32) Random Write Note: Base on CrystalDiskMark 3.03 with file size 1000MB 120MB/sec 250 MB/sec 348 MB/sec 540 MB/sec 20 MB/sec 40 MB/sec 101 MB/sec 197 MB/sec 5.6K 11K 19K 32.7K 4.3K 9.5K 23K 46.5K 2.3. SoftWare Function ECC Scheme URAT function GPIO S.M.A.R.T TRIM 5 26 SEP 2017
2.4. SMART Attributes The following table defines the vendor specific data in byte 2 to 361 of the 512-byte SMART data. Attribute ID Raw Attribute Value Attribute Name 0x01 MSB 0 0 0 0 0 Read error rate 0x05 LSB MSB 0 0 0 0 Reallocated sectors count 0x09 LSB MSB 0 0 Reserved 0x0C LSB MSB 0 0 Power cycle count 0xA0 LSB MSB 0 0 Uncorrectable sector count when read/write 0xA1 LSB MSB 0 0 0 0 Number of valid spare block 0xA2 LSB MSB 0 0 0 0 Number of cache data block 0xA3 LSB MSB 0 0 0 0 Number of initial invalid block 0xA4 LSB MSB 0 0 Total erase count 0xA5 LSB MSB 0 0 Maximum erase count 0xA6 LSB MSB 0 0 Minimum erase count 0xA7 LSB MSB 0 0 Average erase count 0xC0 LSB MSB 0 0 Power-off retract count 0xC2 MSB 0 0 0 0 0 Controlled temperature 0xC3 LSB MSB 0 0 Hardware ECC recovered 0xC4 LSB MSB 0 0 Reallocation event count 0xC7 LSB MSB 0 0 0 0 Ultra DMA CRC error count 0xF1 LSB MSB 0 0 Total LBAs written (each write unit = 32MB) 0xF2 LSB MSB 0 0 Total LBAs read (each read unit = 32MB) 6 26 SEP 2017
2.5. ACPI M.2 SATAIII SATA Interface Layout of Signal and Power Segment Pins 7 26 SEP 2017
2.6. Device Goldfinger Pin Signal Definitions 8 26 SEP 2017
3. Power Characteristics 3.1. Supply Voltage Parameter Specifications Parameter Specifications Input Voltage 3.3V +/- 5% 3.2. Power Consumption Parameter Specifications Idle (max.) Active (max.) Specifications (W) 0.264W (3.3V * 80 ma) 1.5W (3.3V * 450 ma) 4. Mechanical Specifications Form Factor Length (mm) Width (mm) Height (mm) Single Sided Module 42 22 2.15 Dual Sided Module 42 22 3.5 4.1. Dimensions 9 26 SEP 2017
N o tes: All dimensions are in millimeters 10 26 SEP 2017
5. Reliability Specifications 5.1. Environmental Conditions Environmental specifications are following MIL-STD-810F, as following table. Environment Storage Temperature Operating Temperature Vibration Shock Humidity MTBF Specification 55 C ~ +95 C 0 C to 70 C (Standard) ;-25 C to 85 C(Extended); -40 C to 85 C (Industrial) 20G(7~2K Hz, 3 axes) 1000G(1ms, 3 times) Relative Humidity: 10-95%, non-condensing >3,000,000 hours Note1: Vibration reference standard IEC 60068-2-6 Note2: Shock reference standard IEC 60068-2-27 Note3: MTBF condition, Telcordia SR-332 5.2. TBW(TeraBytes Written) Endurance Capacity TBW 16GB 24TB Based on JEDEC JESD218A & 219A standard 32GB 48TB 64GB 96TB 128GB 192TB 6. Ordering Informations Model name P/N Capacity Version Flash Type Temp CSC016GRE-E710A00A 16GB CSC032GRE-E710A00A 32GB CSC032GRE-E810A00A 32GB Micron-16nm M2SCFII-4M CSC064GRE-E810A00A 64GB SM2246EN MLC Normal-Temp CSC128GRE-E910A00A 128GB CSC064GRE-G910A00D 64GB CSC128GRE-G910A00D 128GB Toshiba-15nm CSC016GRE-E709A00A 16GB M2SCFII-4M CSC032GRE-E709A00A 32GB CSC032GRE-E809A00A 32GB SM2246XT Micron-16nm MLC Normal-Temp CSC064GRE-E809A00A 64GB 11 26 SEP 2017
Model name P/N Capacity Version Flash Type Temp CSC128GRE-E909A00A 128GB Micron-16nm M2SCFII-4M CSC064GRE-G909A00D 64GB SM2246XT MLC Normal-Temp Toshiba-15nm CSC128GRE-G909A00D 128GB CSI016GRE-E710A00A 16GB CSI032GRE-E710A00A 32GB CSI032GRE-E810A00A 32GB Micron-16nm M2SCFII-4MT CSI064GRE-E810A00A 64GB SM2246EN MLC Wide-Temp CSI128GRE-E910A00A 128GB CSI064GRE-G910A00D 64GB CSI128GRE-G910A00D 128GB Toshiba-15nm CSI016GRE-E709A00A 16GB CSI032GRE-E709A00A 32GB CSI032GRE-E709A00A 32GB Micron-16nm M2SCFII-4MT CSI064GRE-E709A00A 64GB SM2246XT MLC Wide-Temp CSI128GRE-E809A00A 128GB CSI064GRE-G809A00D 64GB CSI128GRE-G809A00D 128GB Toshiba-15nm 7. Contact Information ACPI, a storage business company, specializes in the design and marketing of SSD, EDM, and Industry CF products. For further information, please reach us at the following contact information: ACPI Digital Co., Ltd. TEL: 886-2-7731-5188 FAX: 886-2-7731-5288 E-mail: sales@acpigroup.com Address: 11F.-3, No.186, Jian 1st Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.) www.acpigroup.com 12 26 SEP 2017