E-mail Changes Required for Outlook 2010 for PC E-mail Changed required to be made on your designated Date and Time of Migration Change Incoming and Outgoing Mail Server Open Outlook 2010 and Select from the File Menu -> Info -> Account Settings E-mail Changes Required for Outlook 2010 for PC - 1
Confirm under the 'Type' of Account, the Name it should say 'IMAP/SMTP' if it states 'POP Account' Please contact Albion Support on 0207-212-9060 for further instructions. If your account is a IMAP Account Select your Albion Email Account and Select 'Change...' E-mail Changes Required for Outlook 2010 for PC - 2
Change Incoming Server In the field that says 'Incoming mail server" change this to secure.emailsrvr.com as shown above. Change Outgoing Server In the field that says 'Outgoing mail server (SMTP)" change this to secure.emailsrvr.com as shown above. Login Information - Password Please note as part of the upgrade we have new password requirements. If your old email password did not met the following requirments, (See below) you will receive a sepatate e-mail containing your new password. If you received such an email type your new password in the Password Field. If you didn't receive such an email your old email password remains the same. Passwords must contain at least 6 characters. Passwords cannot contain: 3 or more consecutive numerals (e.g., 567, 1234, 98765). The word "password." The mailbox user name. The mailbox domain name. E-mail Changes Required for Outlook 2010 for PC - 3
Click on the "More Settings..." Button Click on the Advanced Tab. Under Incoming Server, Change 'Use the following type of encrypted connection from 'None' to 'SSL' As shown Above. Confirm the Port should be 993, as shown above. Under Outgoing server (SMTP), Change 'Use the following type of encrypted connection from 'None' to 'SSL' As shown Above. Confirm the Port should be 465, as shown above. E-mail Changes Required for Outlook 2010 for PC - 4
Click on the Outgoing Server Tab Make Sure 'My outgoing server (SMTP) required authenication is click and "Use same settings as my incoming mail server" is selected. As shown above. Click 'OK' to complete the changes E-mail Changes Required for Outlook 2010 for PC - 5
Test Account Settings Click the Next Button and it test the new settings. Click Finish and then quit Outlook and reopen E-mail Changes Required for Outlook 2010 for PC - 6
Changing where e-mail is stored Once you reopen Outlook, Select from the File Menu -> Info -> Account Settings and select your Albion Account Again, click 'Change...' This Time click on "More Settings..." and select the Tab for Sent items. Now select the folder on the Email Server that you would like Sent Email to be stored in. Do the Same for 'Deleted Items' by Selecting the 'Deleted Items' Tab and select the folder on the Server you would like Deleted Items to be stored in. Click 'OK' button and then Click 'Next' and then Finally click 'Finish' All the changes have now been made. Outlook will now connect to the updated Servers and resync all your e-mail, depending on how much e-mail you have and the speed for the Internet Connection, this may take some time. Its recommended that if you have a large mailbox you leave Outlook open over night so it can complete the resync. While the resync is taken place you can always use Webmail to access new your e-mail. The URL for WebMail has changed to https://webmail.albion.co.uk. When you first login you will notice new e-mail will arrive. We will have completed the resync of e-mail over night so all your older e-mail will then be accessible the next morning. E-mail Changes Required for Outlook 2010 for PC - 7