FFP Fingerprint USB Flash Drive User Manual Fingerprint encryption USB3.0 High speed Multiple platform support Quick Start
1. Plug-in the flash drive to an USB port on your computer, and click CD Drive: AP on the window of My computer, double click the app icon FPU.exe to run the application. Note: Some security software may misunderstand and forbid the operation, please set to allow the operation or close the security software. 2. Set Password 3. Enroll Fingerprint
1. Click + to add fingerprint 2. Enter fingerprint name 3. Enroll your fingerprint according to the direction 4. Open the secure partition 2. Click Unlock 1.Click Back 3. Fingerprint authentication. When the fingerprint is correct, the secure partition pop up, "Security" is the secure partition. 5. Close the application or pull out the flash drive, the "Security" partition is automatically closed.
Contents 1. About the product... 5 1.1 Welcome... 5 1.2 Parameters... 5 2. Fingerprint Management Application... 5 3. Register password and fingerprint... 6 3.1 Set Password... 6 3.2 Enroll Fingerprint... 7 4. Usage of Fingerprint Flash Drive... 8 Method 1:Offline Certification... 8 Method 2:Application... 8 5. Managing fingerprint and password... 9 6. Q & A... 10
1. About the product 1.1 Welcome Dear Users, thank you for using the fingerprint flash drive, the flash drive is an integration of biometric identification technology and data storage. Designed for those demanding the highest level of data protection, the drive can safeguard sensitive data against unauthorized access attempts with fingerprint authentication. Data stored in the secure partition are safely protected and can only be accessed when the scanned fingerprint is authenticated. Featuring convenience and top-class security, it not only spares you the trouble of memorizing long passwords, but also brings you a peace of mind. 1.2 Parameters Interface: USB3.0 and USB2.0 Fingerprint: 10 fingerprints. OS support: Application software: Windows XP, Vista, Windows7, Windows 8, Windows 10. Storage Access: Windows XP, Vista, Windows 7, Windows 8, Windows 10, Linux, Mac(Can recognize the fingerprint and unlock the secure partition) 2. Fingerprint Management To run the fingerprint management application on your computer: 1. Click CD Drive: AP in the window of My computer 2. Double click the app icon FPU.exe to run the application. Note: Some security software may misunderstand and forbid the operation, please set to allow the operation or close the security software..
3. Register password and fingerprint 3.1 Set Password It will prompt the user to set the password and fingerprint when Using the application the first time, Click OK to set it.
3.2 Enroll Fingerprint Tips: Slightly change the angle of your finger for every attempt, allowing the system to store fingerprints of the pad, both sides, and tip of your finger. Repeat the step until the scan of your fingerprint is completed.
4. Usage of Fingerprint Flash Drive Method 1:Offline Certification 1.Attach the flash drive to an available USB port on your computer and the blue light will light up 2.Place your finger (the one had been enrolled) on the fingerprint sensor with light and even pressure. You will see the green light (Red light scintillation represents unrecognized fingerprint) when the fingerprint is authenticated, you can see the secure partition and access the data stored in this partition. As shown below. Security represents for secure partition. 3. Security partition will close automatically after pulling out the flash drive. Method 2:Application 1. Attach the flash drive to an available USB port on your computer and click CD Drive: AP in the window of My computer, double click the app icon FPU.exe to run the application. Click Unlock, fingerprint authentication interface will pop up. Click Unlock
2. When the fingerprint is correct, the secure partition pop up, "Security" is the secure partition. 3. Close the application or pull out the flash drive, the "Security" partition is automatically closed 5. Managing fingerprint and password Add Fingerprint Delete Fingerprint Setting Password Note:Allow to add maximum 10 fingerprints.
6. Q & A 6.1Why does the flash drive cannot be recognized? Please re-attach the flash drive and run the application all over again or change another USB port. 6.2 The secure partition is closed suddenly? 1the secure partition is closed by default when the application is closed. 2Please re-attach the flash drive and run the application all over again or change another USB port 6.3 Can t access the secure partition after placing the finger on the fingerprint sensor for several times? Your fingerprint may not be read by the device if your finger is too wet. If the problem occurs, please dry your finger. Re-attach the flash drive when it still doesn t work. 6.4Why does the flash drive only have 10GB in capacity? The default capacity of public partition is 10GB. Users can see the default capacity of the secure partition only when their fingerprints are authenticated. 6.5Does the fingerprint flash drive apply to the OTG smart phone? Only the public partition can be accessed via the OTG smart phone. 6.6Whether the fingerprint USB flash drive can work in the MAC computer? 1No limitation for the Public partition,it works on each system. 2For Security partition, After the registration of fingerprints or password on the Windows system, it can also be used on various operating systems such as MAC computer. 6.7Why do files larger than 4G cannot be saved in the flash drive? The initial format of the flash drive is Fat32, you need to format it into exfat when transmitting files larger than 4GB. 6.8What are the compatible systems for fingerprint application? The fingerprint application can be operated in device with windows xp,windows 7,windows 8,windows 10 systems.