MT340 Series ewpoint and Temperature Transmitters for Very ry onditions eatures Measures dew point from -70... +80 (-94... +176 ) with an accuracy of ±2 (±3.6 ) ondensation-resistant Unique auto-calibration feature maintains accuracy over long term ompatible with Vaisala RYAPâ Hand-Held ewpoint Meter M70 Traceable calibration to measurements and analog outputs (certificates included) raphical display and keypad for convenient operation Optional alarm relays and mains power supply module Up to three analog outputs, RS-232/485, LAN Modbus protocol support (RTU/ TP) Vaisala RYAPâ ewpoint and Temperature Transmitter Series MT340 is designed for industrial low-humidity applications such as industrial drying, compressed air systems, semiconductor industry, dry rooms, baking ovens, and metal heat treatment. Vaisala RYAPâ Sensor enefits Accurate and reliable measurement xcellent long-term stability ast response time Resistant to environmental factors and condensation Stability at Low ew Points raphical isplay of Measurement ata and Trends for onvenient Operation The MT340 features a large numerical and graphical display with a multilingual menu and keypad. It allows users to easily monitor operational data, measurement trends, and access measurement history for the past 12 months. The Vaisala RYAPâ sensor is immune to particulate contamination, water condensation, oil vapor, and most chemicals. The sensor is condensation resistant and recovers perfectly if exposed to liquid water. ast reaction time and stability make its performance unmatched also in dynamic and low dew point applications. The display shows measurement trends, real-time data, and measurement history. Versatile Outputs and ata ollection The MT340 can support up to three isolated analog outputs. Optional A mains power and relay outputs are also available. In addition to the analog outputs, the MT340 supports Modbus RTU and TP/IP communication protocol. The data logger, with real-time clock and battery backup, guarantees reliable logging of measurement data for over four years. The display alarm allows tracking of any measured parameter, with freely configurable low and high limits.the recorded data can be viewed on the local display or transferred to a P with Microsoft Windowsâ software. The transmitter can also be connected to a network with an optional LAN interface, which enables an thernet connection. A
US service cable makes it easy to connect the MT340 to a P via the service port for modifying settings or reading logged data. asy Installation With multiple options to choose from, the instrument can be tailored to meet the specific needs of each individual application and is delivered installationready and pre-configured for each delivery. Quick delivery time and global service network make MT340 a perfect choice for any project. The Vaisala RYAPâ Hand-Held ewpoint Meter M70 is ideal for fieldchecking MT340 transmitters. MT342 MT344 MT347 MT348 Pressure range 0... 50 bar/0... 725 psia 0... 50 bar/0... 725 psia 0... 10 bar/0... 145 psia 0... 40 bar/0... 580 psia Mechanical durability up to 250 bar/ 3625 psia up to 100 bar/1450 psia up to 10 bar/145 psia up to 70 bar/1015 psia Probe diameter 12 mm/0.5 in 12 mm/0.5 in 12 mm/0.5 in 12 mm/0.5 in Installation lange 36 mm/1.4 in itting body M22 x 1.5 itting body R 3/8 in ISO itting body R1/2 in ISO itting body NPT 1/2 in itting body NPT 1/2 in itting body 1/2 in ISO itting body NPT 1/2 in all-valve set Sampling cell ALLVALV-1 HMP302S MT242S or MT242S2
MT340 Series ewpoint and Temperature Transmitters for Very ry onditions MT341 for Installations in ry Spaces 77 (3.0) 244.5 (9.63) 119 (4.69) 183 (7.20) MT341 dimensions in mm (inches) MT342 with Small Size langed Probe 92.5 (3.64) lange intersection 41(1.61) 16 M6 (0.6 3) 45 ø12 (0.47) MT341 display shows measurement trends, real-time data, and measurement history. MT341 is made for installations in dry rooms where the entire dew point transmitter needs to be inside the dry space. The concept is easy to clean and suitable also for cleanrooms. 9(0.35) ø36 (1.42) 71.5 (2.81) 81 (3.19) Sampling cell HMP302S 58.7 (2.31) 1/8"-27 NPT The MT342 probe is installed using a flange or sampling cell. The small probe is ideal for integration into larger equipment or applications with high pressures. M 6 ø32 (1.26) 1/8"-27 NPT ø24.5 MT342 dimensions in mm (inches) ø12.5 (0.49) 45 45 71 (2.80) 7 (0.28)
Ø 12 (0.47) M22x1.5 or NPT 1/2" MT344 with Probe for High Pressures 41 (1.61) 120 (4.72) 170 (6.69) MT344 dimensions in mm (inches) The MT344 features a threaded connection for extended pressures with different fitting-body options. It is ideal for permanent installation into pressurized or vacuum processes. MT347 with Small-Sized Probe Ø 12 (0.47) 41 (1.61) I S O 3 / 8 / N P T 1 / 2 or 1 / 2 ISO 84 (3.31) Hex 22 mm (0.87) The MT347 probe is ideal for pressurized or vacuum applications in tight spaces. The small probe is installed using Swagelokâ connectors. MT347 dimensions in mm (inches) MT348 with Probe for Pipeline Installations 215.5 (8.48) / 448 (17.6) 191 (7.52) / 410 (16.1) 41 (1.61) - 149 (5.87) / 41 (1.61) - 379 (14.9) R1/2 ISO7/1 Ø 13.5 (0.53) Ø 12 (0.47) 41 (1.61) 35 (1.37) The MT348 is ideal for installation into pressurized or vacuum processes where the probe needs to be able to be removed while the process is running. The probe depth is adjustable. Optional filter for low pressures, suitable for all models, dimensions in mm (inches). Optional filter provides faster gas exchange to the sensor in applications where protection from particulates is not needed.
MT340 Series Technical ata Measurement Performance ew Point Sensor Measurement range Measurement range for continuous use Accuracy up to 20 bar/290 psia Accuracy, 20... 50 bar/290... 725 psia ewpoint temperature ( ) 80 70 60 50 40 30 20 10 0-10 -20-30 -40-50 -60-70 -80-90 Accuracy ±3 Td Water vapor saturation line Vaisala RYAP â 180M -70... +80 (-94... +176 ) T d -70... +45 (-94... +113 ) T d ±2 /±3.6 (see the accuracy graph below) additional inaccuracy +1 T d Not recommended area for continuous measurement Accuracy ±2 Td -40-30 -20-10 0 10 20 30 40 50 60 70 80 Temperature of measured gas ( ) ew Point Accuracy vs. Measurement onditions Response time T63 [T90] response times at 20 and 1 l/min flow: -60... -20 T d (-76... -4 T d ) 5 s [10 s] -20... -60 T d (-4... -76 T d ) 45 s [10 min] Temperature Measurement range Accuracy Accuracy not specified ewpoint measurement lower limit 63% [90%] at +20 gas temperature 0... +80 (+32... +176 ) ±0.2 at room temperature Temperature sensor Pt100 RT lass 0.1 I 60751 Relative Humidity Measurement range Accuracy (RH <10 %RH, at + 20 ) oncentration by Volume (ppm) Measurement range (typical) Accuracy (at + 20, 1 bar) 0... 70 %RH ±0.004 %RH + 20% of reading 10... 2500 ppm 1 ppm + 20% of reading Other measurement parameters available (model-dependent): mixing ratio, absolute humidity, pressure dew point calculated to 1 bar, temperature difference (T-Td), water vapor pressure Operating nvironment Operating temperature for probes Mechanical durability Mechanical durability of transmitter body Mechanical durability with display Storage temperature range Pressure range for probes Sample flow rate Measured gases lectromagnetic compatibility -40... +80 (-40... +176 ) up to +180 (+356 ) 40... +60 (-40... +140 ) 0... +60 (+32... +140 ) -55... +80 (-67... +176 ) see probe specifications no effect non-corrosive gases omplies with M standard N61326-1, Industrial environment Note: Transmitter with display test impedance of 40 Ω is used in I61000-4-5 (Surge immunity) Inputs and Outputs Operating voltage 10... 35 V, 24 VA ±20 % with optional power supply module Power onsumption at 20 (U in 24V) RS-232 U out 2 x 0... 1V / 0... 5 V / 0... 10 V I out 2 x 0... 20 ma display and backlight during sensor purge Analog Outputs (2 Standard, 3rd Optional) current output voltage output Accuracy of analog outputs at 20 Temperature dependence of the analog outputs xternal Loads current outputs 100... 240 VA 50/60 Hz max. 25 ma max. 25 ma max. 60 ma + 20 ma max. + 110 ma 0... 20 ma, 4... 20 ma 0... 1 V, 0... 5 V, 0... 10 V 0.05% full scale ± 0.005%/ full scale RL < 500 Ω 0... 1 V output RL > 2 kω 0... 5 V and 0... 10V outputs RL > 10 kω Wire size 0.5... 2.5 mm2 (AW 20... 14) stranded wires recommended igital outputs Protocols Service connection Relay outputs thernet Interface (Optional) Supported standards onnector IPv4 address assignment Protocols WLAN Interface (Optional) RS-232, RS-485 (optional) ASII commands, Modbus RTU RS-232, US 0.5 A, 250 VA, SPT (optional) 10AS-T, 100AS-TX 8P8 (RJ45) Supported standards 802.11b Antenna connector type IPv4 address assignment Protocols Security Authentication / ncryption (WLAN) Optional ata Logger with Real-Time lock Logged parameters Logging interval Max. logging period with max. temporal resolution Logged points attery lifetime isplay Menu languages HP (automatic), static Telnet, Modbus TP/IP HP (automatic), static RP-SMA Telnet, Modbus TP/IP WP 64/128, WPA 2/802.11i Open / no encryption Open / WP WPA Pre-shared key / TKIP WPA Pre-shared key / MP (a.k.a. WPA2) max. three with trend/min./max. values 10 sec. (fixed) 4 years, 5 months 13.7 million points per parameter min. 5 years L with backlight, graphical trend display of any parameter nglish, hinese, innish, rench, erman, Japanese, Russian, Spanish, Swedish
Mechanical Specifications 71 (2.80) 77 (3.03) able bushing onduit fitting M20x1.5 for cable diameter 8... 11mm/ 0.31... 0.43" 1/2" NPT User cable connector (optional) M12 series 8-pin (male) option 1 female plug with 5 m (16.4 ft.) black cable option 2 female plug with screw terminals US-RJ45 Serial onnection able 219685 Probe cable diameter 5.5 mm 183 (7.20) Standard probe cable lengths 2 m, 5 m, or 10 m (Additional cable lengths available, see order forms for details) 169 (6.65) Housing material -AlSi 10 Mg (IN 1725) Housing classification IP66 IP65 (NMA4X) with local display Weight (depending on selected probe, cable and modules) 1.0-3.0 kg 116 (4.57) 96 (3.78) Ø 7 (0.28) imensions in mm (inches) Published by Vaisala 210952N- Vaisala 2017 www.vaisala.com All rights reserved. Any logos and/or product names are trademarks of Vaisala or its individual partners. Any reproduction, transfer, distribution or storage of information contained in this document is strictly prohibited. All specifications technical included are subject to change without notice.
Order form Valid from March 2017 Orderer Order no. MT341 ewpoint and Temperature Transmitter or wall mounting Vaisala RYAP ewpoint and Temperature Transmitter MT340 1 0 1 A 0 PRI 1 Transmitter type MT341 1 2 Probe cable length Wall mounting probe 5 3 - - 0 4 Measurement parameters ewpoint + ppm + mixing ratio (or T= -40...80 ) A parameters ewpoint + ppm + mixing ratio + relative humidity + temperature (or T= 0...80 ) Td/f, PPM, x, a, RH, T, Td, Td/f atm, Td atm, antp, pw, pws, h, dt (or T at 0...80') 5 isplay No display 0 raphical display with keypad 1 6 Power supply 10...35 V, 24 VA A 10...35 V, 24 VA with galvanic isolation for outputs Universal A -power (100...240 VA) Universal A -power (100...240 VA) + US -power cord Universal A -power (100...240 VA) + UR -power cord Universal A -power (100...240 VA) + UK -power cord Universal A -power (100...240 VA) + AUS -power cord xternal US A-adapter (for LAN/WLAN interface in USA) Not IP65 K 7 Analog output 4... 20 ma 1 0... 20 ma 2 0... 1 V 3 0... 5 V 4 0... 10 V 5 8 Analog output No 3rd analog output A 9 parameter and scaling ewpoint Td/f (-80...+20 ) ( -112...+68 ) 10 for h1&h2(&h3) ewpoint Td/f (-60...+20 ) ( -76...+68 ) ewpoint Td/f (-50...+50 ) ( -58...+122 ) Temperature (0...+80 ) (+32...+176 ) PPMv (0...1000 ppm) only for channel 1 PPMw (0...1000 ppm) only for channel 1 H Mixing ratio (0...30 g/kg d.a) (0...210 gr/lbs) J J J Relative humidity (0...100 %RH) K K K SPIAL efine parameter (unit) for h1: ( ) h2: ( ) h3: ( ) X X X efine scale for h1: h2: h3: hannel 1 hannel 2 hannel 3, choose A, if not needed 11 Operating pressure 1 bar (abs) (14.5 psi abs) 1 12 Output units Metric units A Non-metric units 13 Additional feature None 0 RS-485 serial interface with galvanic isolation 2 LAN (ethernet) interface + 2 m cable (RJ45) 4 ata Logging Module 6 14 Additional feature 2 None 0 3rd analog output hoose also analog output parameter and scale for h3 3 ata Logging Module Not possible if the data logger module has already been chosen in item 13 6 15 Interface cable connection able gland (for 8...11 mm cable) (for 0.315...0.433 inch cable) 1 onduit fitting for wire conduit (NPT1/2") 2 onnector (M12, 8 pin) and plug with 5m black cable 3 onnector (M12, 8 pin) and plug for user's cable 4 16 Transmitter housing Wall mounting A installation Wall mounting with quick installation or on junction boxes Pipe/pole installation Pipe/pole installation with rain shield for outdoor installations IN-rail installation 17 Sensor RYAP 180M 1 18 Sensor protection Sintered stainless steel filter A 19 Probe installation None 0 accessories 20 User's guide None A nglish erman pdf user's guides available at: rench www.vaisala.com/dmt340 Japanese J 21 P accessories None 0 MI70LINK software for Windows with RS232 service cable 2 MI70LINK software for Windows with US service cable 4 22 alibration Standard calibration with NIST traceable certificate service item for calibration: 223299 A 23 Service contract None 0 Selections in bold are included in the prices of the basic versions. Selections in italic are available at an extra price. TOTAL QTY TOTAL VALU *Measuring in pressures above 20 bara (290 psia) sets requirements on the operating voltage. Please consult Vaisala sales xample of order code with typical settings: MT340 1 5 0 A 1 A 1 A 1 A 0 0 1 A 1 A 0 4 A 0 nd customer:
Order form Valid from March 2017 Orderer Order no. MT342 ewpoint and Temperature Transmitter With Small Size langed Probe for Use with Sampling ell Vaisala RYAP ewpoint and Temperature Transmitter MT340 2 0 1 A 0 PRI 1 Transmitter type MT342 2 2 Probe cable length 2 m cable 5 m cable 10 m cable 3 - - 0 4 Measurement ewpoint parameters + ppm + mixing ratio (or T= -40...80 ) A parameters ewpoint + ppm + mixing ratio + relative humidity + temperature (or T= 0...80 ) Td/f, PPM, x, a, RH, T, Td, Td/f atm, Td atm, antp, pw, pws, h, dt (or T at 0...80') 5 isplay No display 0 raphical display with keypad 1 6 Power supply 10...35 V, 24 VA A 10...35 V, 24 VA with galvanic isolation for outputs Universal A -power (100...240 VA) Universal A -power (100...240 VA) + US -power cord Universal A -power (100...240 VA) + UR -power cord Universal A -power (100...240 VA) + UK -power cord Universal A -power (100...240 VA) + AUS -power cord xternal US A-adapter (for LAN/WLAN interface in USA) Not IP65 K 4... 20 ma 7 Analog output 1 0... 20 ma 2 0... 1 V 3 0... 5 V 4 0... 10 V 5 8 Analog output No 3rd analog output A 9 parameter and scaling ewpoint Td/f (-80...+20 ) ( -112...+68 ) 10 for h1&h2(&h3) ewpoint Td/f (-60...+20 ) ( -76...+68 ) ewpoint Td/f (-50...+50 ) ( -58...+122 ) Temperature (0...+80 ) (+32...+176 ) PPMv (0...1000 ppm) only for channel 1 PPMw (0...1000 ppm) only for channel 1 H Mixing ratio (0...30 g/kg J d.a) (0...210 gr/lbs) J J Relative humidity (0...100 %RH) K K K SPIAL efine parameter (unit) for h1: ( ) h2: ( ) h3: ( ) X X X efine scale for h1: h2: h3: hannel 1 hannel 2 hannel 3, choose A, if not needed 11 Operating pressure 1 bar (abs) (14.5 psi abs) 1 3 bar (43.5) 2 5 bar (72.5) 3 7 bar (101.5) 4 9 bar (130.5) 5 special ( max X 50 bar / 725 psi )* (bar / psi)(abs) Metric units 12 Output units A Non-metric units 13 Additional feature None 0 RS-485 serial interface with galvanic isolation 2 LAN (ethernet) interface + 2 m cable (RJ45) 4 ata Logging Module 6 14 Additional feature None 2 0 3rd analog output 3 hoose also analog output parameter and scale for h3 ata Logging Module Not possible if the data logger module has already been chosen in item 13 6 able gland (for 8...11 (for 0.315...0.433 inch cable) 15 Interface cable connection mm cable) 1 onduit fitting for wire conduit (NPT1/2") 2 onnector (M12, 8 pin) and plug with 5m black cable 3 onnector (M12, 8 pin) and plug for user's cable 4 Wall mounting 16 Transmitter housing A installation Wall mounting with quick installation or on junction boxes Pipe/pole installation Pipe/pole installation with rain shield for outdoor installations IN-rail installation 17 Sensor RYAP 180M 1 18 Sensor protection Sintered stainless steel filter A Stainless steel filter for vacuum 19 Probe installation None 0 accessories Sampling cell ( HMP302S ) 1 20 User's guide None A nglish erman pdf user's guides available at: rench www.vaisala.com/dmt340 Japanese J P accessories None 21 0 MI70LINK software for Windows with RS232 service cable 2 MI70LINK software for Windows with US service cable 4 22 alibration Standard calibration with NIST traceable certificate service item for calibration: 223299 A 23 Service contract None 0 Selections in bold are included in the prices of the basic versions. Selections in italic are available at an extra price. TOTAL QTY TOTAL VALU *Measuring in pressures above 20 bara (290 psia) sets requirements on the operating voltage. Please consult Vaisala sales xample of order code with typical settings: MT340 2 0 1 A 1 A 1 A 0 0 1 A 1 A 1 2 A 0 nd customer:
Order form Valid from March 2017 Orderer Order no. MT344 ewpoint and Temperature Transmitter or Pressurized Processes Vaisala RYAP ewpoint and Temperature Transmitter MT340 4 0 1 A 0 PRI 1 Transmitter type MT344 4 2 Probe cable length 2 m cable H 5 m cable J 10 m cable K 3 - - 0 4 Measurement parameters ewpoint + ppm + mixing ratio (or T= -40...80 ) A parameters ewpoint + ppm + mixing ratio + relative humidity + temperature (or T= 0...80 ) Td/f, PPM, x, a, RH, T, Td, Td/f atm, Td atm, antp, pw, pws, h, dt (or T at 0...80') 5 isplay No display 0 raphical display with keypad 1 6 Power supply 10...35 V, 24 VA A 10...35 V, 24 VA with galvanic isolation for outputs Universal A -power (100...240 VA) Universal A -power (100...240 VA) + US -power cord Universal A -power (100...240 VA) + UR -power cord Universal A -power (100...240 VA) + UK -power cord Universal A -power (100...240 VA) + AUS -power cord xternal US A-adapter (for LAN/WLAN interface in USA) Not IP65 K 7 Analog output 4... 20 ma 1 0... 20 ma 2 0... 1 V 3 0... 5 V 4 0... 10 V 5 8 Analog output No 3rd analog output A 9 parameter and scaling ewpoint Td/f (-80...+20 ) ( -112...+68 ) 10 for h1&h2(&h3) ewpoint Td/f (-60...+20 ) ( -76...+68 ) ewpoint Td/f (-50...+50 ) ( -58...+122 ) Temperature (0...+80 ) (+32...+176 ) PPMv (0...1000 ppm) only for channel 1 PPMw (0...1000 ppm) only for channel 1 H Mixing ratio (0...30 g/kg d.a) (0...210 gr/lbs) J J J Relative humidity (0...100 %RH) K K K SPIAL efine parameter (unit) for h1: ( ) h2: ( ) h3: ( ) X X X efine scale for h1: h2: h3: hannel 1 hannel 2 hannel 3, choose A, if not needed 11 Operating pressure 1 bar (abs) (14.5 psi abs) 1 3 bar (43.5) 2 5 bar (72.5) 3 7 bar (101.5) 4 9 bar (130.5) 5 special ( max 50 bar / 725 psi )* (bar / psi)(abs) X 12 Output units Metric units A Non-metric units 13 Additional feature None 0 RS-485 serial interface with galvanic isolation 2 LAN (ethernet) interface + 2 m cable (RJ45) 4 ata Logging Module 6 14 Additional feature 2 None 0 3rd analog output hoose also analog output parameter and scale for h3 3 ata Logging Module Not possible if the data logger module has already been chosen in item 13 6 15 Interface cable connection able gland (for 8...11 mm cable) (for 0.315...0.433 inch cable) 1 onduit fitting for wire conduit (NPT1/2") 2 onnector (M12, 8 pin) and plug with 5m black cable 3 onnector (M12, 8 pin) and plug for user's cable 4 16 Transmitter housing Wall mounting A installation Wall mounting with quick installation or on junction boxes Pipe/pole installation Pipe/pole installation with rain shield for outdoor installations IN-rail installation 17 Sensor RYAP 180M 1 18 Sensor protection Sintered stainless steel filter A Stainless steel filter for vacuum 19 Probe installation itting body M22 x 1.5 2 accessories itting body NPT1/2" 3 20 User's guide None A nglish erman pdf user's guides available at: rench www.vaisala.com/dmt340 Japanese J P accessories None 21 0 MI70LINK software for Windows with RS232 service cable 2 MI70LINK software for Windows with US service cable 4 22 alibration Standard calibration with NIST traceable certificate service item for calibration: 223299 A 23 Service contract None 0 Selections in bold are included in the prices of the basic versions. Selections in italic are available at an extra price. TOTAL QTY TOTAL VALU *Measuring in pressures above 20 bara (290 psia) sets requirements on the operating voltage. Please consult Vaisala sales xample of order code with typical settings: MT340 4 H 0 1 A 1 A 1 A 0 0 1 A 1 A 2 2 A 0 nd customer:
Order form Valid from March 2017 Orderer Order no. MT347 ewpoint and Temperature Transmitter With Small Pressure-tight Probe Vaisala RYAP ewpoint and Temperature Transmitter MT340 7 0 1 A 0 PRI 1 Transmitter type MT347 7 2 Probe cable length 2 m cable S 5 m cable T 10 m cable U 3 - - 0 4 Measurement ewpoint parameters + ppm + mixing ratio (or T= -40...80 ) A parameters ewpoint + ppm + mixing ratio + relative humidity + temperature (or T= 0...80 ) Td/f, PPM, x, a, RH, T, Td, Td/f atm, Td atm, antp, pw, pws, h, dt (or T at 0...80') 5 isplay No display 0 raphical display with keypad 1 6 Power supply 10...35 V, 24 VA A 10...35 V, 24 VA with galvanic isolation for outputs Universal A -power (100...240 VA) Universal A -power (100...240 VA) + US -power cord Universal A -power (100...240 VA) + UR -power cord Universal A -power (100...240 VA) + UK -power cord Universal A -power (100...240 VA) + AUS -power cord xternal US A-adapter (for LAN/WLAN interface in USA) Not IP65 K 4... 20 ma 7 Analog output 1 0... 20 ma 2 0... 1 V 3 0... 5 V 4 0... 10 V 5 8 Analog output No 3rd analog output A 9 parameter and scaling ewpoint Td/f (-80...+20 ) ( -112...+68 ) 10 for h1&h2(&h3) ewpoint Td/f (-60...+20 ) ( -76...+68 ) ewpoint Td/f (-50...+50 ) ( -58...+122 ) Temperature (0...+80 ) (+32...+176 ) PPMv (0...1000 ppm) only for channel 1 PPMw (0...1000 ppm) only for channel 1 H Mixing ratio (0...30 g/kg J d.a) (0...210 gr/lbs) J J Relative humidity (0...100 %RH) K K K SPIAL efine parameter (unit) for h1: ( ) h2: ( ) h3: ( ) X X X efine scale for h1: h2: h3: hannel 1 hannel 2 hannel 3, choose A, if not needed 11 Operating pressure 1 bar (abs) (14.5 psi abs) 1 3 bar (43.5) 2 5 bar (72.5) 3 7 bar (101.5) 4 9 bar (130.5) 5 special ( max X 50 bar / 725 psi )* (bar / psi)(abs) Metric units 12 Output units A Non-metric units 13 Additional feature None 0 RS-485 serial interface with galvanic isolation 2 LAN (ethernet) interface + 2 m cable (RJ45) 4 ata Logging Module 6 14 Additional feature None 2 0 3rd analog output 3 hoose also analog output parameter and scale for h3 ata Logging Module Not possible if the data logger module has already been chosen in item 13 6 able gland (for 8...11 (for 0.315...0.433 inch cable) 15 Interface cable connection mm cable) 1 onduit fitting for wire conduit (NPT1/2") 2 onnector (M12, 8 pin) and plug with 5m black cable 3 onnector (M12, 8 pin) and plug for user's cable 4 Wall mounting 16 Transmitter housing A installation Wall mounting with quick installation or on junction boxes Pipe/pole installation Pipe/pole installation with rain shield for outdoor installations IN-rail installation 17 Sensor RYAP 180M 1 18 Sensor protection Sintered stainless steel filter A Stainless steel filter for vacuum 19 Probe installation Swagelok connector ISO 3/8" 4 accessories Swagelok connector NPT 1/2" 5 Swagelok connector ISO 1/2" K 20 User's guide None A nglish erman pdf user's guides available at: rench www.vaisala.com/dmt340 Japanese J P accessories None 21 0 MI70LINK software for Windows with RS232 service cable 2 MI70LINK software for Windows with US service cable 4 22 alibration Standard calibration with NIST traceable certificate service item for calibration: 223299 A 23 Service contract None 0 Selections in bold are included in the prices of the basic versions. Selections in italic are available at an extra price. TOTAL QTY TOTAL VALU *Measuring in pressures above 20 bara (290 psia) sets requirements on the operating voltage. Please consult Vaisala sales xample of order code with typical settings: MT340 7 S 0 1 A 1 A 1 A 0 0 1 A 1 A 4 2 A 0 nd customer:
Order form Valid from March 2017 Orderer Order no. MT348 ewpoint and Temperature Transmitter or Pressurized Pipelines Vaisala RYAP ewpoint and Temperature Transmitter MT340 8 0 1 A 0 PRI 1 Transmitter type MT348 8 2 Probe cable length 2 m cable for standard probe V 5 m cable for standard probe W 10 m cable for standard probe X 2 m cable for long probe 1 5 m cable for long probe 2 10 m cable for long probe 3 15 m cable for long probe 9 3 - - 0 4 Measurement ewpoint parameters + ppm + mixing ratio (or T= -40...80 ) A parameters ewpoint + ppm + mixing ratio + relative humidity + temperature (or T= 0...80 ) Td/f, PPM, x, a, RH, T, Td, Td/f atm, Td atm, antp, pw, pws, h, dt (or T at 0...80') 5 isplay No display 0 raphical display with keypad 1 6 Power supply 10...35 V, 24 VA A 10...35 V, 24 VA with galvanic isolation for outputs Universal A -power (100...240 VA) Universal A -power (100...240 VA) + US -power cord Universal A -power (100...240 VA) + UR -power cord Universal A -power (100...240 VA) + UK -power cord Universal A -power (100...240 VA) + AUS -power cord xternal US A-adapter (for LAN/WLAN interface in USA) Not IP65 K 4... 20 ma 7 Analog output 1 0... 20 ma 2 0... 1 V 3 0... 5 V 4 0... 10 V 5 8 Analog output No 3rd analog output A 9 parameter and scaling ewpoint Td/f (-80...+20 ) ( -112...+68 ) 10 for h1&h2(&h3) ewpoint Td/f (-60...+20 ) ( -76...+68 ) ewpoint Td/f (-50...+50 ) ( -58...+122 ) Temperature (0...+80 ) (+32...+176 ) PPMv (0...1000 ppm) only for channel 1 PPMw (0...1000 ppm) only for channel 1 H Mixing ratio (0...30 g/kg J d.a) (0...210 gr/lbs) J J Relative humidity (0...100 %RH) K K K efine parameter (unit) for h1: ( ) h2: ( ) X X X SPIAL h3: ( ) efine scale for h1: h2: h3: hannel 1 hannel 2 hannel 3, choose A, if not needed 11 Operating pressure 1 bar (abs) (14.5 psi abs) 1 3 bar (43.5) 2 5 bar (72.5) 3 7 bar (101.5) 4 9 bar (130.5) 5 special ( max X 50 bar / 725 psi )* (bar / psi)(abs) Metric units 12 Output units A Non-metric units 13 Additional feature None 0 RS-485 serial interface with galvanic isolation 2 LAN (ethernet) interface + 2 m cable (RJ45) 4 ata Logging Module 6 14 Additional feature None 2 0 3rd analog output 3 hoose also analog output parameter and scale for h3 ata Logging Module Not possible if the data logger module has already been chosen in item 13 6 able gland (for 8...11 (for 0.315...0.433 inch cable) 15 Interface cable connection mm cable) 1 onduit fitting for wire conduit (NPT1/2") 2 onnector (M12, 8 pin) and plug with 5m black cable 3 onnector (M12, 8 pin) and plug for user's cable 4 Wall mounting 16 Transmitter housing A installation Wall mounting with quick installation or on junction boxes Pipe/pole installation Pipe/pole installation with rain shield for outdoor installations IN-rail installation 17 Sensor RYAP 180M 1 18 Sensor Sintered stainless protection steel filter A Stainless steel filter for vacuum 19 Probe installation itting body R 1/2" ISO with leak screw A accessories itting body R 1/2" ISO ( no leak screw ) itting body NPT1/2" ( no leak screw ) Two fitting bodies: R 1/2" ISO with leak screw + NPT1/2" Sampling cell (MT242S) Sampling cell with swagelok connectors (MT242S2) all valve set for pressurized pipelines lange for duct installation H 20 User's guide None A nglish erman pdf user's guides available at: rench www.vaisala.com/dmt340 Japanese J P accessory None 21 0 MI70LINK software for Windows with RS232 service cable 2 MI70LINK software for Windows with US service cable 4 22 alibration Standard calibration with NIST traceable certificate service item for calibration: 223299 A 23 Service contract None 0 Selections in bold are included in the prices of the basic versions. Selections in italic are available at an extra price. TOTAL QTY TOTAL VALU *Measuring in pressures above 20 bara (290 psia) sets requirements on the operating voltage. Please consult Vaisala sales xample of order code with typical settings: MT340 8 V 0 1 A 1 A 1 A 0 0 1 A 1 A 2 A 0 nd customer: