D2200 4G DTU Support 4G LTE FDD, LTE TDD, downward compatible 3G & 2.5G data networks Industrial grade design, support working in extreme environment Integrated data transmission terminal Hardware watchdog and secured VPN connection Support remote cloud management platform, centralized management Support RS232 and RS485, through UART interface
Introduction Movingcomm ComIn D2200 is a 4G DTU which is one of our leading product designed for machine to machine (M2M) and Internet of Things (IoT). The 4G DTU is a rugged industrial device manufactured with industrial grade components can apply to extreme working environment. ComIn D2200 is a reliable DTU device that supports both RS232 and RS485 standard serial interfaces. It supports multiple TCP/IP protocols, support cellular data communication for transparent transmission from one place to another remote destination. It also has built-in hardware and software watchdog and support automatic recovery from hardware failure. Movingcomm Cloud management platform supports DTU remote management. It is 24/7 secured platform in a reliable data center that helps device configuration and management for over thousands units so easier than ever before. Firmware upgrade, configuration upgrade, device status and other functions all can be done in the high-speed networked platform.
Product Features Active Connectivity Support 4G LTE FDD, LTE TDD bands, 3G HSPA+, EVDO cellular network and downward compatible with GPRS/CDMA network to ensure the data connection is active at the time. Support RS232 and RS485. Rugged Industrial Design Industrial grade components with operating temperature -30 C to 70 C, and support wide power input range from 6V~48VDC for wide industrial sectors. Metal enclosure with IP45 rating protection. Security Protection Support Secured Link Connection via APN / VPDN network Support Stateful Packet Inspection, Secure Shell (SSH), Intrusion Protection, DDOS defense, IP-MAC Address Binding and others to eliminate external network attack and intrusion. High Reliability Automatic Link Detection and Recovery, PPP Link Layer Detection, VPN Link detection and auto reconnection. Built-in Hardware watchdog, automatically recover the device in the event of system failure Ease of Use Support CLI, WEB, Cloud management platform Support Short Distance WIFI connection to enable on-site support and configuration User Friendly Web GUI Support System Logging for easy debug and maintenance
Support Centralized Controls Supported centralized configuration, control and management for those devices linked to DTU control center. Hardware Interfaces Support 1 x 10/100Mbps Fast Ethernet connection Support RS232 and RS485 and transparent transmission Support Reset function to control DTU reset
Product Specifications Hardware Specifications Interfaces Power Consumption Environment Mechanical WIFI Indicators EMC Ethernet SIM Serial Power Input Reset Antenna Power Input Standby Working Peak 1 x 10/100Mbps LAN Port(Terminal Block Connector) 1 x Drawer-Type SIM Holder 1 x RS232 and RS485 6V~48VDC 1 x Reset (Terminal Block Connector) 1 x 50Ω SMA FEMALE 6~48VDC, Reverse-voltage Protection and Surge Protection 100mA~200mA@12V 150mA~300mA@12V 300mA@12V Operating Temp -30 C to 70 C Storage Temp -40 C to 85 C Humidity Dimensions Installation IP Rating Weight Transmit Power SYS LINK DATA 5% to 95% RH Non-condensing 75 x 60 x 16mm (L x W x H) Excluding Antenna and installation parts Hanger Mounting IP41 Main Device 180g Built-in Antenna,Only available short distance WIFI communication (option) System Indicator Link Connection Indicator Data transmitting Indicator ESD Electrostatic Discharge EN61000-4-2,Level 3 Immunity Surge Immunity EN61000-4-5,Level 3 Oscillatory Wave Immunity EN61000-4-12,Level 3
Software Functions Internet Access LTE/WCDMA/EVD0/EDGE/GPRS, APN, VPDN Authentication CHAP, PAP Network Cellular Refer to below cellular specifications table LAN Protocols ARP, Ethernet IP Application Ping, Trace, DHCP Server, DHCP Relay, DHCP Client, DNS, DDNS, Telnet IP Routing Support Static Route Protection Support SPI, DoS, Port Forwarding, Access Control, MAC Address Binding and etc Security VPN PPTP/L2TP/IPsec/GRE/OPENVPN Management Multi-Level authentication Others Support ARP Protection, DMZ, MAC Address Filtering PPP, ICMP, TCP Keep alive, auto recovery from link Link Detection Reliability failure Watchdog Self-diagnostics, auto recovery from hardware failure Configuration Support Telnet, Web, SSH access configuration Network Upgrade Web Upgrade or Remote Upgrade Management System Status, Network Status, Signal Status, SIM Status Status Clients Support 1 5 Clients Concurrent Communication DTU Functions Protocols Support Transparent Transmission and DDP Protocol Heartbeat User Defined TCP/UDP Login, Heartbeat Packets Cellular Specifications 4G Cellular Features Cellular Bands 3G 2G 4G FDD LTE TDD LTE FDD LTE, TD LTE TD-SCDMA/TD-HSPA WCDMA/HSPA/HSPA+/DC-HSPA+ CDMA2000 EVDO RevA, RevB CDMA1x, GPRS, EDGE B1, B2,B3, B4, B5, B7, B8, B12, B13, B17,B19, B20, B21, B25, B31 B38, B39, B40, B41
Data Rate Output Power Sensitivity TD-SDCMA UMTS EVDO CDMA1x GSM/GPRS/EDGE LTE FDD LTE TDD TD-SCDMA DC-HSPA+ HSPA+ WCDMA 1xEVDO EDGE GPRS <24dBm <-109dBm 2010~2025MHz / 1880~1920MHz 2100MHz or 850/1900/2100MHz or 850/ 900/1900/2100MHz/AWS 800/1900MHz or 450MHz (optional) 800/1900MHz or 450MHz (optional) 900/1800MHz Dual Band or 850/900/1800/1900MHz Quad Band DL 100Mbps / UL 50Mbps DL 150Mbps / UL 50Mbps DL 2.8Mbps / UL 2.2Mbps DL 42Mbps / UL 5.76Mbps DL 21Mbps / UL 5.76Mbps DL 384Kbps / UL 384Kbps DL 14.4Mbps / UL 5.7Mbps DL 237kbps / UL 118kbps DL 85.6kbps / UL 42.8kbps Pin Definition Pin Definition Description Remark 1 SGND/RESET SGND / RESET Either GND/Reset or Reset/GND configuration in Pin 1/ Pin 10 2 RXD RS232 DTU Receive 3 TXD RS232 DTU Send 4 B- 485 B/- 5 A+ 485 A/+ 6 RX+ LAN 7 RX- LAN 8 TX+ LAN 9 TX- LAN 10 SGND/RESET SGND /RESET 11 PGND Negative Power Input 12 VCC+ Positive Power Input DC6-48V
Product Dimensions Order Information Product Code Description Dimensions ComIn D2200 4G DTU 75 x 60 x 16mm ComIn D2000 DTU Embedded Board
To see the full line of MovingComm products, Visit www.movingcomm.com/en INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH MOVINGCOMM PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN MOVINGCOMM S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, MOVINGCOMM ASSUMES NO LIABILITY WHATSOEVER, AND MOVINGCOMM DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF MOVINGCOMM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY MOVINGCOMM, THE MOVINGCOMM PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE MOVINGCOMM PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. MovingComm may make changes to specifications and product descriptions at any time, without notice. Buyers must receive a confirmation from MovingComm prior using the product. MovingComm shall have no responsibility whatever for conflicts or incompatibilities arising from future changes to them. Copyright 2017 Shenzhen MovingComm Technology. All rights reserved. SHENZHEN MOVINGCOMM TECHNOLOGY CO., LTD. Office: 2F, Building D, JinYiLai Industrial Park, LiuXianDong Industrial Zone, XiLi Town, NanShan District, Shenzhen. 518055, P.R. China Tel: 86-755-23125215 Ext 999, 86-131-68045675 Fax: 86-755-23125215 Ext 802 Email: marketing@movingcomm.com