Section 01: Setting up LED SHOW-T9 Software for HC-102 receiving card: Note: (Important): The Following features are required in the PC that is used to connect to the Receiving controller. A: The network card of your computer must be 1000mbps or GIGABIT speed; Step 01: Install the LED T-9 software. Download the latest version from wiedamark.com: http://www.wiedamark.com/ledcurtainsupport.aspx Step 02: Open the software: T-9 Software. (Open as a administrator if you use Vista or Win7 Operating Systems. If you can not install software on win7. Install the file WinPcap_4_1_1.exe from the WinPcap_4_1_1 folder in the LED SHOW-T9 Easy controller.rar file.) Step 03: Click on Control(C) Step 04: Then Choose Screen management(l) Step 05: Choose: By Net card then choose Gigabit ethernet Nic Step 06: Click LED1 -(left bottom corner of window) Step 07: Click Config Selected one... Step 08: Fill in the password: T9 Then Click OK then Click Yes. Step 09: Click the Load button... -(Button which is at the bottom of this window); Step 10: Load the wdm-t9.dat.zip file (available from our website). Step 11: Click Send to receiving card then click OK Step 12: Click Save on receiver.
Section 02: How to adjust the size for your curtain: Note: (Important): The Following features are required in the PC that is used to connect to the Receiving controller. A: The network card of your computer must be 1000mbps or GIGABIT speed; Step 01: Install the LED T-9 software. Download the latest version from wiedamark.com: http://www.wiedamark.com/ledcurtainsupport.aspx Step 02: Open the software: LED T-9 software. (open as a administrator if you use Vista,Win7) Step 03: Click: Control(C) Step 04: Choose: Screen management(l) Step 05: Click: LED1 (left corner of window); Step 06: Click: Config Selected one... Step 07: Fill in the password: T9 Then Click OK then Click Yes. Step 08: Click: Connect setting : Setup the right size-height and Wide pixels of your curtain (Curtain size/pitch size). Example 128 x 128 pixels. (More: If you have more then two (2) HC-102 cards linked together, Put the right number by Row Count and Col count according to your card connection set up.) Step 09: Click: Send to receiving card
Section 02: How to adjust the size for your curtain:
Section 03: Setting up the T-9 sotware to capture Madrix or other 3rd party software. Note: (Important): The Following features are required in the PC that is used to connect to the Receiving controller. A: The network card of your computer must be 1000mbps or GIGABIT speed; Step 01: Click: Settings(S) Step 02: Click: Software Settings Step 03: Under Play Mode choose Capture Screen Mode and close Software settings window. Step 04: Adjust (by clicking and dragging) the Play Area to the location of you computer monitor you would like to display on the LED curtains. Step 05: Click the Hide Background button to capture and send the info to the LED curtain.
Section 03: Setting up the T-9 sotware to capture Madrix or other 3rd party software. Hide Background Button Play Area
Section 02: How to use HC-102 with video processor (T7 Sending card-dvi inside): Note: (Important): A: The VGA card of your computer must be setup to clone, Duplicate or copy model; Step 01: Check the connection of video processor with PC, Controller and curtain: (photo below) Step 02: One cable: VGA/DVI output to Video processor VGA/DVI input; Step 03: Another one cable: Video processor DVI output (Left) to video processor DVI input(right) (it is T7 sending card); Step 04: Third cable: two ends USB cable from pc or laptop to video processor USB interface; Step 05: Last cable: Lan cable output to receiving card input. Then, Install the LED SHOW-T9 by same way like in Section 01 but this time you need click By sending card in the software window. Follow the photo on the next page.
Section 02: How to use HC-102 with video processor (T7 Sending card-dvi inside):