Table of Contents CaseIH Combines...1 CaseIH 2188 Combine Yield Monitor Kit...1 Q: My Combine has a factory yield monitor in it, can I remove it when I install a Ag Leader System?...2 How To Hook up a Case AFS Moisture Sensor to Ag Leader Moisture Module PN 4001538...3 How to Hook up an Ag Leader GPS receiver to a Case IH Pro600...5 CNH Moisture Adapter Cables...8 How to Hook up an Ag Leader GPS receiver to a Case IH Pro700...9 Ground Speed on 2016+ x140 Series Case Combines...12
CaseIH Combines Grain yield monitoring articles related to CaseIH combine harvesters CaseIH 2188 Combine Yield Monitor Kit Click the desired link from the list of reference documents for this model combine: Ag Leader Integra/Versa/EDGE/InSight - 2005800 CAN Combine Installation Instructions - Grain PF/YM Series - 2005200-3 Combine Installation Instructions PF/YM Series - Initial Calibration Sheet South American - Initial Calibration Sheet CaseIH Combines 1
Q: My Combine has a factory yield monitor in it, can I remove it when I install a Ag Leader System? Question: My Combine has a OEM Monitor in it from the factory, can I remove it when I install a Ag Leader System? Answer: As long as the OEM Monitor does not do any of the combine functions (Rotor Speed, Engine Diag, ect..) Example: Case 8010 combine with a Case IH Pro 600 display, the Pro 600 does all the combine functions so we cannot completely remove the OEM monitor. Q: My Combine has a factory yield monitor in it, can I remove it when I install a Ag Leader System?2
How To Hook up a Case AFS Moisture Sensor to Ag Leader Moisture Module PN 4001538 Setup: The customer will remove the cable clamps that secure the OEM Moisture Sensor cable and then double the cable back over so that it reaches our module. Use a PN 4002061-3 to convert the CASE IH 6 pin Duetsch connection to the Ag Leader 8 pin Duetsch moisture module connection. How To Hook up a Case AFS Moisture Sensor to Ag Leader Moisture Module PN 4001538 3
How To Hook up a Case AFS Moisture Sensor to Ag Leader Moisture Module PN 4001538 4
How to Hook up an Ag Leader GPS receiver to a Case IH Pro600 riority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4" /> How to hook up an Ag Leader GPS receiver to a Case Pro600. Setup: On the bottom of the Pro600 there is a RS232 port. Connect the mobile logging cable PN 4002675-18 (For GPS 1500/1600/2500 receivers) (cig power) or PN 4004176-18 (For GPS 6000/6500 receivers) to the port directly on the bottom of the Pro600. (You will have to go into the pro andriority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4" /> configure the port. The port is RS232 B and will need to output VTG and GGA at 5hz, 38400 baud.) How to Hook up an Ag Leader GPS receiver to a Case IH Pro600 5
How to Hook up an Ag Leader GPS receiver to a Case IH Pro600 6
How to Hook up an Ag Leader GPS receiver to a Case IH Pro600 7
CNH Moisture Adapter Cables Priority="64" SemiHidden="false" UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4" /> Ag Leader Integra/Versa/EDGE/InSight 1. 2. CNH Adapter Cables Old Style Module Moisture Sensor Adapter for New Holland CR/CX or CaseIH 14xx, 16xx, 21xx, 23xx, 25xx, AFX (Except AFS Black Box sensors) a. PN 4100103: Upgrade CNH EMS to Ag Leader CAN Display (AFX/CR/CX) b. PN 4000362-15: Upgrade CNH EMS to Ag Leader CAN Display (14xx-25xx) New Style Module Moisture Sensor Adapter for New Holland CR/CX or CaseIH 14xx, 16xx, 21xx, 23xx, 25xx, AFX (Except AFS Black Box sensors) a. PN 4002061-3: Upgrade CNH EMS to Ag Leader CAN Display (AFX/CR/CX) b. PN 4002061-15: Upgrade CNH EMS to Ag Leader CAN Display (14xx-25xx) 3. CaseIH YM Ready Combines: 2008-Newer *(Check for 4-Pin Deutsch Connection on Flow Sensor)* YM/PF 1. a. PN 4100334: 7010, 8010, 7120, 8120, 9120 Models b. PN 4100336: 5088, 6088, 7088 Models AFS Black Box (CaseIH Branded YM2000) to Ag Leader YM or PF Series Display (uses all existing sensors) a. PN 2000931: Adapts CaseIH 25 pin cab cable to 25 pin connection on YM/PF display b. PN 3000691: Post Bracket c. PN 2000139: Anchor Bar d. PN 2001304-2: Monitor Bracket Install Kit 1. AFS Universal Display or Universal Display Plus to Ag Leader PF Display 3. a. PN 3001200-1: AFS to PF3000 b. PN 3001200-2: AFS to PF3000Pro c. PN 3001200-3: AFS to PFAdvantage Moisture Sensor Adapter for New Holland CR/CX or CaseIH 14xx, 16xx, 21xx, 23xx, 25xx, AFX (Except AFS Black Box sensors) a. PN 4100104: Upgrade CNH EMS to Ag Leader PF Display (14xx-25xx) b. PN 4100103: Upgrade CNH EMS to Ag Leader PF Display (AFX/CR/CX) CNH Moisture Adapter Cables 8
How to Hook up an Ag Leader GPS receiver to a Case IH Pro700 Overview: This procedure should be applicable to the Pro700/IntelliView equipped CR/AFX combine. Setup: 1.) Find the white 10 pin connector located inside the machine's right hand panel: How to Hook up an Ag Leader GPS receiver to a Case IH Pro700 9
The pin-out for the white connector is as follows: Of which, these pins are of relevance: Function Pin Wire Color Power A Orange Ground B Black TX (transmit) E Blue RX (receive) F Red The pin-out for the GPS 1500, 1600, 2500 Port A Serial Connector is as follows: How to Hook up an Ag Leader GPS receiver to a Case IH Pro700 10
Function Pin Wire Color Power 4 Yellow Ground 5 Black TX (transmit) 3 Green RX (receive) 2 Red 2.) Connect the BLUE wire (pin E) of the machine connector to the GREEN wire (pin 3) of the GPS 1500, 1600, 2500 Port A Serial Connector. 3.) Connect the RED wire (pin F) of the machine connector to the RED wire (pin 2) of the GPS 1500, 1600, 2500 Port A Serial Connector. 4.) Set the display GPS configuration to RS232A: How to Hook up an Ag Leader GPS receiver to a Case IH Pro700 11
Ground Speed on 2016+ x140 Series Case Combines Affected Kit: 4100338 On 2016+ x140 Series Case combines, the ground speed sensor is not supported by the Speed Module. When installing a Harvest kit on this series of machine the ground speed sensor will not be used. GPS is required as a speed source to run yield monitoring with this machine. Content last reviewed on: 8/9/17 Reviewed by: JMD Ground Speed on 2016+ x140 Series Case Combines 12