JL2005A Dual-mode Toy CAM Controller (CIF/VGA) Revision: 1.3 Date: 1/23/2006 JEILIN Technology Co., Ltd. 8F, No.179, Jian Yi Rd., Chung Ho, Taipei Hsien, Taiwan TEL:886-2-82215466 FAX:886-2-82215456
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 Table of Contents 0. Revision History...3 1. Generation Description...4 2. Features...4 3. Application...4 4. Functional Block Diagram...5 5. Pin Assignment...6 6. Pin Description and Pin Configuration...7 7. Package and Dimension...11 JEILIN Technology Co., Ltd. 2 of 14 2006/1/23
0. Revision History JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 Revision Description of Changes Date 1.0 Create 2003/08/15 1.1 Formal Release 2004/04/15 1.2 Remove some obsolete data. 2005/11/14 1.3 Standardize the Jeilin company logo. 2006/01/23 JEILIN Technology Co., Ltd. 3 of 14 2006/1/23
1. Generation Description JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 JL2005A is a low-cost chipset for dual-mode Toy Camera. It consists of required camera interfaces such as CMOS sensor, SDRAM, I 2 C interface, and USB 1.1 in order to construct a low-cost Toy Camera. Functionally, JL2005A receives the image raw data from many popular CMOS sensors, and then store it into SDRAM. All the captured image/photo stored in SDRAM can be uploaded to PC, or configured as motion image to PC through USB 1.1 interface. This USB 1.1 interface can also provide the basic video conference function in network through PC. 2. Features Programmable sensor timing generator to support various CMOS sensors. On chip clamp for dark level compensation, 8 bits per channel. On chip measurements on programmable window. Flexible SDRAM controller supporting 16~256Mb. SDRAM arbitrator allows sensor writing, USB reading, CPU accessing. USB image transfer using isochroous mode. Embedded turbo 8051 running at 24 MHz, with 256 internal RAM, 16K internal ROM. Support standard 8051 ports, allowing for external ROM, and flexible use of GPIO. Image preview on PC. Camera function, take picture on SDRAM. LCD display for status and user control. Buzzer beeps for user notice. 3. Application Toy Camera Pen Drive Camera Dual-mode PC camera Video conference JEILIN Technology Co., Ltd. 4 of 14 2006/1/23
4. Functional Block Diagram JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 SDRAM 16~256Mb CMOS Sensor photobit bimorphic fuji hyundai pixelart ICM Sensor I/F & Sensor TG SDRAM Controller Turbo 8051 USB1.1 PC P0 P1 P2 P3 JEILIN Technology Co., Ltd. 5 of 14 2006/1/23
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 5. Pin Assignment LQFP128 NRESET S_D7 S_D6 S_D5 S_D4 S_D3 S_D2 S_D1 S_D0 S_RESET S_HSYNC S_VSYNC S_PCLK VCC GND S_EXCLK S_PWDN SCL SDA NC TST2 TST3 TST4 NC NC NC GND DPLUS DMINUS VCC NC NC 128 127 126 125 124 123 122 121 120 119 118 117 116 115 114 113 112 111 110 109 108 107 106 105 104 103 102 101 100 99 98 97 GND 1 96 NC XI 2 95 NC XO 3 94 NC VCC 4 93 NC CKE 5 92 NC DCLK 6 91 NC DQ0 7 90 NEA DQ1 8 89 RMWAKE DQ2 9 88 GND DQ3 10 87 VCC DQ4 11 86 P17 GND 12 85 P16 JL2005A VCC 13 84 P15 DQ5 14 83 P14 LQFP128 DQ6 15 82 P13 DQ7 16 81 P12 DQ8 17 80 P11 DQ9 18 79 P10 DQ10 19 78 GND DQ11 20 77 VCC DQ12 21 76 P27 DQ13 22 75 P26 DQ14 23 74 P25 DQ15 24 73 P24 A0 25 72 P23 NC 26 71 P22 NC 27 70 P21 A1 28 69 P20 A2 29 68 P07 A3 30 67 P06 A4 31 66 P05 A5 32 65 P04 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 A6 A7 A8 A9 A10 A11 BS0 BS1 NCS NRAS NCAS NWE LDQM UDQM GND VCC P30 P31 P32 P33 P34 P35 P36 P37 NPSEN ALE P00 P01 P02 P03 VCC GND JEILIN Technology Co., Ltd. 6 of 14 2006/1/23
6. Pin Description and Pin Configuration JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 Pin No. Pin Name Description Type Drive 1 VSS PLL Ground P 2 XI Crystal Input X 3 XO Crystal Output X 4 VCC PLL Power P 5 CKE SDRAM Clock Enable O 2mA 6 DCLK SDRAM Clock O 2mA 7 DQ_0 SDRAM Data Bus B,D 2mA 8 DQ_1 SDRAM Data Bus B,D 2mA 9 DQ_2 SDRAM Data Bus B,D 2mA 10 DQ_3 SDRAM Data Bus B,D 2mA 11 DQ_4 SDRAM Data Bus B,D 2mA 12 VSS Digital Ground P 13 VCC Digital Power P 14 DQ_5 SDRAM Data Bus B,D 2mA 15 DQ_6 SDRAM Data Bus B,D 2mA 16 DQ_7 SDRAM Data Bus B,D 2mA 17 DQ_8 SDRAM Data Bus B,D 2mA 18 DQ_9 SDRAM Data Bus B,D 2mA 19 DQ_10 SDRAM Data Bus B,D 2mA 20 DQ_11 SDRAM Data Bus B,D 2mA 21 DQ_12 SDRAM Data Bus B,D 2mA 22 DQ_13 SDRAM Data Bus B,D 2mA 23 DQ_14 SDRAM Data Bus B,D 2mA 24 DQ_15 SDRAM Data Bus B,D 2mA 25 A_0 SDRAM Address Bus O 2mA 26 NC 27 NC 28 A_1 SDRAM Address Bus O 2mA 29 A_2 SDRAM Address Bus O 2mA 30 A_3 SDRAM Address Bus O 2mA 31 A_4 SDRAM Address Bus O 2mA 32 A_5 SDRAM Address Bus O 2mA 33 A_6 SDRAM Address Bus O 2mA JEILIN Technology Co., Ltd. 7 of 14 2006/1/23
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 34 A_7 SDRAM Address Bus O 2mA 35 A_8 SDRAM Address Bus O 2mA 36 A_9 SDRAM Address Bus O 2mA 37 A_10 SDRAM Address Bus O 2mA 38 A_11 SDRAM Address Bus O 2mA 39 BS_0 SDRAM Bank Select O 2mA 40 BS_1 SDRAM Bank Select O 2mA 41 NCS SDRAM Chip Select (active low) O 2mA 42 NRAS SDRAM Row Address Strobe (active low) O 2mA 43 NCAS SDRAM Column Address Strobe (active low) O 2mA 44 NWE SDRAM Write Enable (active low) O 2mA 45 LDQM SDRAM Data Mask (low byte) O 2mA 46 UDQM SDRAM Data Mask (high byte) O 2mA 47 VSS Digital Ground P 48 VCC Digital Power P 49 P3_0 8051 Port3 B,U,T 4mA 50 P3_1 8051 Port3 B,U,T 4mA 51 P3_2 8051 Port3 B,U,T 4mA 52 P3_3 8051 Port3 B,U,T 4mA 53 P3_4 8051 Port3 B,U,T 4mA 54 P3_5 8051 Port3 B,U,T 4mA 55 P3_6 8051 Port3 B,U,T 4mA 56 P3_7 8051 Port3 B,U,T 4mA 57 NPSEN 8051 npsen O 2mA 58 ALE 8051 ALE O 2mA 59 P0_0 8051 Port0 B,U,T 4mA 60 P0_1 8051 Port0 B,U,T 4mA 61 P0_2 8051 Port0 B,U,T 4mA 62 P0_3 8051 Port0 B,U,T 4mA 63 VCC Digital Power P 64 VSS Digital Ground P 65 P0_4 8051 Port0 B,U,T 4mA 66 P0_5 8051 Port0 B,U,T 4mA 67 P0_6 8051 Port0 B,U,T 4mA 68 P0_7 8051 Port0 B,U,T 4mA 69 P2_0 8051 Port2 B,U,T 4mA JEILIN Technology Co., Ltd. 8 of 14 2006/1/23
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 70 P2_1 8051 Port2 B,U,T 4mA 71 P2_2 8051 Port2 B,U,T 4mA 72 P2_3 8051 Port2 B,U,T 4mA 73 P2_4 8051 Port2 B,U,T 4mA 74 P2_5 8051 Port2 B,U,T 4mA 75 P2_6 8051 Port2 B,U,T 4mA 76 P2_7 8051 Port2 B,U,T 4mA 77 VCC Digital Power P 78 VSS Digital Ground P 79 P1_0 8051 Port1 B,U,T 4mA 80 P1_1 8051 Port1 B,U,T 4mA 81 P1_2 8051 Port1 B,U,T 4mA 82 P1_3 8051 Port1 B,U,T 4mA 83 P1_4 8051 Port1 B,U,T 4mA 84 P1_5 8051 Port1 B,U,T 4mA 85 P1_6 8051 Port1 B,U,T 4mA 86 P1_7 8051 Port1 B,U,T 4mA 87 VCC Digital Power P 88 VSS Digital Ground P 89 RMWAKE USB Remote Wakeup I 90 NEA 8051 nea I 91 NC 92 NC 93 NC 94 NC 95 NC 96 NC 97 NC 98 NC 99 VCC USB Power P 100 DMINUS USB bus D- A 101 DPLUS USB bus D+ A 102 VSS USB Ground P 103 NC 104 NC 105 NC JEILIN Technology Co., Ltd. 9 of 14 2006/1/23
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 106 TSTD Test Pin I,D 107 TSTC Test Pin I,D 108 TEST Test Pin I,D 109 NC 110 SDA I 2 C Data Line B,T 4mA 111 SCL I 2 C Clock Line B,T 4mA 112 S_PWDN Sensor Power Down O 2mA 113 S_EXCLK Clock to Sensor O 2mA 114 VSS Digital Ground P 115 VCC Digital Power P 116 S_PCLK Clock from Sensor I,C,T 117 S_VSYNC Sensor VSYNC B,D,T 2mA 118 S_HSYNC Sensor HSYNC B,D,T 2mA 119 S_RESET Sensor Reset O 2mA 120 S_D_0 Sensor Image Date I,D,T 121 S_D_1 Sensor Image Date I,D,T 122 S_D_2 Sensor Image Date I,D,T 123 S_D_3 Sensor Image Date I,D,T 124 S_D_4 Sensor Image Date I,D,T 125 S_D_5 Sensor Image Date I,D,T 126 S_D_6 Sensor Image Date I,D,T 127 S_D_7 Sensor Image Date I,D,T 128 NRESET Power On Reset I,S,T Note: I - Input Pin O - Output Pin B - Bi-directional Pin T - 5V Tolerant Pin S - Schmitt Input Pin P - Power/Ground Pin A - USB Data Pin X - Crystal U- Pull-up Pin D- Pull-down Pin C- Clock Pin JEILIN Technology Co., Ltd. 10 of 14 2006/1/23
7. Package and Dimension Package Outline (128-pin LQFP) JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 JEILIN Technology Co., Ltd. 11 of 14 2006/1/23
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 Package Outline (128-pin LQFP) continued JEILIN Technology Co., Ltd. 12 of 14 2006/1/23
Dimension of LQFP128 JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 Dimension Min Nom Max A 1.60 A1 0.05 0.15 A2 1.35 1.40 1.45 b 0.13 0.18 0.23 b1 0.13 0.19 c 0.09 0.20 c1 0.09 0.16 D 16.0 BSC D1 14.0 BSC e 0.40 BSC E 16.0 BSC E1 14.0 BSC L 0.45 0.60 0.75 L1 1.00 REF R1 0.08 R2 0.08 0.20 S 0.20 θ 0 0 3.5 0 7 0 θ1 0 0 θ2 11 0 12 0 13 0 θ3 11 0 12 0 13 0 Unit: REF: BSC: mm Reference Basic Spacing between Centers (integrated circuit package dimension) Chip-On-Board, COB Please contact sales division for more details. JEILIN Technology Co., Ltd. 13 of 14 2006/1/23
JL2005A Dual-mode Toy CAM Controller (CIF/VGA) V1.3 JEILIN Technology Co., Ltd. 8F, No. 179, Jian Yi Rd., Chung Ho, Taipei Hsien, Taiwan Tel: 886-2-8221-5466 Fax: 886-2-8221-5456 Website: www.jeilin.com.tw Email: jeilin@jeilin.com.tw 2000 JEILIN Technology Corp., Ltd. All rights reserved. The information in this document has been carefully checked and is believed to be reliable; however no responsibility can be assumed for inaccuracies that may not have been caught. All information in this document is subject to change without prior notice. The information contained in this document is presented only as a guide for applications of our products. No responsibility is assumed by JEILIN Technology for any infringements of intellectual property or other rights of the third parties, which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of JEILIN Technology or others. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of JEILIN Technology. JEILIN Technology Co., Ltd. 14 of 14 2006/1/23