Ricoh SG 30DN - MacProfile IMPORTNT: efore proceeding, ensure the correct Ricoh (OEM) driver and MacProfile have been installed. For assistance with driver and profile installation, refer to the Installation Guide. dobe Illustrator s color space needs to be set to the working space in which the MacProfile was created. This allows for a more accurate screen display of your images. However, the accuracy of the displayed image on your monitor depends more on the quality of the monitor and, more importantly, whether or not it has been calibrated with the Monitor Manufacturer s I profile. dobe Illustrator Workspace Setup.) egin by opening Illustrator. Then, in the menu bar, click Edit > olor Settings (see FIGURE ). This will open the olor Settings window (see FIGURE ). FIGURE PGE of 3 >> v030
) In the olor Settings window, match your settings to those shown below (see FIGURE ). N L srg IE6966-. D E G F H I K J FIGURE. Settings: ustom. heck dvanced Mode. RG: srg IE6966-. D. MYK: U.S. Web oated (SWOP) v E. RG: onvert to Working RG F. MYK: Preserve Embedded Profiles G. Profile Mismatches: heck sk When Opening and also check sk When Pasting H. Missing Profiles: heck sk When Opening I. Engine: dobe (E) J. Intent: Perceptual K. heck: Use lack Point ompensation L. fter all of the settings match those specified above, click the Save button. PGE of 3 >>
M. In the Save olor Settings window that opens, NME your new preset in the File Name field and click Save when complete (see FIGURE 3). a FIGURE 3 N. lick OK to exit the olor Settings window (see FIGURE ). b 3.) t the top of the application click File > New (command+n). In the New Document window, match your settings to the ones shown below (see FIGURE 4). E D FIGURE 4. lick the down arrow next to dvanced. olor Mode: RG. Raster Effects: High (300 ppi) D. Preview Mode: Default E. lick OK to save your changes and continue PGE 3 of 3 >>
4.) When opening or importing images in Illustrator, you may encounter a Missing Profile or Embedded Profile Mismatch warning. For the Missing Profile instance, select the radio button for ssign current working space: srg IE6966-. and click OK to continue (see FIGURE 5). For the Embedded Profile Mismatch instance, select onvert document s colors to the working space and click OK to continue (see Figure 5). FIGURE 5 FIGURE 5 NOTE: lways choose to assign or convert to srg IE6966-.. 5.) Once an image has been opened or imported into Illustrator, you will need to ensure that RG color mode has been selected. In the menu bar, click File > Document olor Mode > RG olor. check mark should now be visible beside RG olor (see FIGURE 6). 3 FIGURE 6 PGE 4 of 3 >>
Printing from dobe Illustrator with the RIOH ficiosg30dn 6.) With the correct color settings entered, you are now ready to print. In the menu bar, click File > Print. In the Print window, match your settings to those shown below (see FIGURE 7). FIGURE 7. Printer: RIOH ficiosg30dn. Size: Defined by Driver. lick olor Management to view the olor Management window (see FIGURE 8) PGE 5 of 3 >>
7.) In the olor Management window, match your settings to the ones shown below (see FIGURE 8). srg IE6966-. srg IE6966-. D E. FIGURE 8. olor Handling: Let Illustrator determine colors. Printer Profile: srg IE6966-.. Rendering Intent: Perceptual PGE 6 of 3 >>
D. t the bottom of the Print window, click Page Setup (see FIGURE 8). In the Page Setup window, match your settings to those shown below (see FIGURE 9). a b FIGURE 9 c a. Format For: RIOH ficiosg30dn b. Paper Size: same as your Transfer Paper c. lick OK to continue. E. lick Printer to continue (see FIGURE 8). 8.) Once Print has been selected, the following Print window will appear (see FIGURE 0). Remember to Mirror the image before printing. You are able to do this within the OEM printer driver or you may choose to manually mirror each image within dobe Illustrator. To mirror the image using the printer driver, heck Flip horizontally (see FIGURE 0). FIGURE 0 PGE 7 of 3 >>
9) lick on Layout and select olor Matching (see FIGURE ). Ricoh ficiosg30dn FIGURE 0) In the olor Matching window, select olor Sync. Then select the appropriate Sawgrass profile: (see FIGURE ) a. Ricoh 30 New: sg_sg30dn_rg_sjr_v.0 Improved color profile delivers accurate photo images and vivid colors for graphic designs and images. b. Ricoh 3300 lassic: sg_sg30dn_rg_sjr_lassic_v.0 Similar to the profile of the previous generation Ricoh 3300 SubliJet-R solution, the Ricoh 30 lassic profile allows replication of legacy prints with minimal color variation for seamless transition when upgrading to the Ricoh 30 SubliJet-R solution. Ricoh ficiosg30dn sg_sg30dn_rg_sjr_v.0 FIGURE PGE 8 of 3 >>
.) lick the drop-down arrow and select Paper Feed (see FIGURE 3). FIGURE 3.) In the paper feed window you are able to select the printer s paper source. We recommend using uto Select unless you have purchased a ypass Tray. For those users printing with a ypass Tray, you will instead select ypass Tray (see FIGURE 4). FIGURE 4 3.) lick the drop-down arrow and select Setup (see FIGURE 5). FIGURE 5 PGE 9 of 3 >>
4.) In the Setup window, match your settings to those shown below (see FIGURE 6). D E FIGURE 6. Print Mode: Inkjet plain paper-high Quality. olor Mode: olor. If Image djustments are not visible, click the drop-down arrow D. Dithering: Use error diffusion E. olor profile: Off 5.) lick the drop-down arrow and select Printer Features (see FIGURE 7). FIGURE 7 PGE 0 of 3 >>
6.) In the Printer Features window, match your settings to those shown below (see FIGURE 8). D FIGURE 8. : 5. M: 5. Y: 5 D. K: 5 7.) lick the drop-down arrow and select Printer onfiguration (see FIGURE 9). FIGURE 9 PGE of 3 >>
8.) In the Printer onfiguration window, match your settings to those shown below (see FIGURE 0). FIGURE 0. heck Do not print blank pages. heck Quick Paper Feed. Sheet-dry print delay in duplex: Off 9.) To save your new preset, click the drop-down arrow and select Save as... (see FIGURE ). NOTE: It is very important not to skip this step of saving the preset. If the preset if not saved, subsequent prints will not be correct because the color management settings established through this process will not be properly utilized by dobe Illustrator and the Mac OS. FIGURE PGE of 3 >>
0.) In the Save Preset s: window, name your new preset accordingly and click OK when complete (see FIGURE )..) lick Print to continue (see FIGURE 3). FIGURE FIGURE 3.) You can now print your image by clicking Print (see FIGURE 8). Illustrator setup is now complete. Remember to, if necessary, convert imported graphics to the srg working space, ensure the RG color mode is checked and select the Ricoh SG 30DN along with the Sawgrass preset each time you print. For the absolute latest information and updates on all products, materials, processes and/or procedures relative to all offerings by or through Sawgrass Technologies, Inc., refer to our website: www.sawgrassink.com PGE 3 of 3 >>